Manufacturer:
(Category: 1020)
Automatic Transfer Switch - ATS Panel - ATI Panel, 1000 Ampere - Applicable for generators up to 675 kVA; Gross weight [kg]: 180
Automatic Transfer Switch - ATS Panel - ATI Panel, 100 Ampere - Applicable for generators up to 65 kVA; Gross weight [kg]: 50
Automatic Transfer Switch - ATS Panel - ATI Panel, 1250 Ampere - Applicable for generators up to 865 kVA; Gross weight [kg]: 180
Caterpillar C15 - Unused - 475 HP - MCW
Engine Brand: CATERPILLAR, Condition: NEW, Engine Cooling Type: Radiator Cooled (std) , Engine Color: Yellow , Flywheel Housing SAE: SAE 3 , Flywheel SAE: Unknown , Engine Condition: New , Turbo Type: Dry , Exhaust System: Dry , ECU Present?: yes , Starter Voltage: 24 Volt , Rated Power: 97 Kw, Rated Speed: 2200 Rpm, Injection Type: ECU (Electronic Control Unit) , , https://www.hamofa.com/stock/diesel-engines/caterpillar-c4-4-w23-46131 70-new/42380, , = More information =, , Type: Engine, Type of fuel: Diesel, Empty weight: 615 kg, Type number: C4.4 W23-4613170
Engine Brand: VOLVO PENTA, Condition: NEW, Engine Cooling Type: Radiator Cooled (std) , Engine Color: Green , Flywheel Housing SAE: SAE 2 , Flywheel SAE: Unknown , Engine Condition: New , Turbo Type: Dry , Exhaust System: Dry , ECU Present?: yes , Starter Voltage: 24 Volt , Rated Power: 185 Kw, Rated Speed: 2200 Rpm, Injection Type: ECU (Electronic Control Unit) , , https://www.hamofa.com/stock/diesel-engines/volvo-penta-tad881ve-new/4 5888, , = More information =, , Type: Engine, Type of fuel: Diesel, Empty weight: 1.030 kg, Type number: TAD881VE
Manufacturer: Epiroc Model: FlexiRoc D65 Type of Machine : DTH Surface Drill Rig UNIT 1 - Year of manufacture: 2019 - Total engine hours: 29,346 - Engine replaced | Hours on new engine: 10,288 - Drilling hours: 10,523 UNIT 2 - Year of manufacture: 2020 - Total engine hours: 26,274 - Engine replaced | Hours on new engine: 8,967 - Drilling hours: 10,000 UNIT 3 - Year of manufacture: 2020 - Total engine hours: 25,005 - Engine replaced | Hours on new engine: approx. 6,500 - Drilling hours: 9,372 Find more here - .ucymachines/ Contact us at - sales@ucymachines
Manufacturer: Sandvik Model: Leopard DI650i Type of Machine : DTH Surface Drill Rig UNIT 1 - Year of manufacture: 2020 - Total engine hours: 19,041 - Engine replaced | Hours on new engine: 7,700 - Drilling hours: 7,355 UNIT 2 - Year of manufacture: 2021 - Total engine hours: 18,608 - Engine replaced | Hours on new engine: approx. 5,422 - Drilling hours: 7,443 Technical Details : - Drilling method: Down-The-Hole (DTH) - Hole diameter range: 115 to 229 mm (4.5 to 9.0 in.) - DTH hammer: Sandvik RH570 (4, 5 and 6 in.) - Flushing air capacity: 28.3 m3/min at 24 bar - Drill rod/tube diameter: 89, 102, 114, 127 and 140 mm (3.5, 4, 4.5, 5 and 5.5 in.) - Rotary head: MRH6 - Engine type: Caterpillar C15 (Tier 3 / Stage 5, Tier 4F) - Engine output power: 403 kW at 1,800 rpm - Cabin: iCab - Production capacity: 2.1 Mt/a (one shift) - Transport height: 3.5 m (11.5 ft) - Weight: 25,100 kg (55 ...
Technische Highlights auf einen Blick:• Motor: Cummins QSF3.8T, Turbo, wassergekühlt, Euro V• Leistung: 90 kW (122 PS) bei 2200 U/min• Einsatzgewicht: 14.620 kg• Schaufelvolumen: 0,6 m³ (Rücklöffel)• Grabkraft: 97 kN (Schaufel) / 70 kN (Arm)• Max. Grabtiefe: 5.490 mm• Max. Arbeitshöhe: 8.495 mm• Fahrgeschwindigkeit: 3,2 / 5,4 km/h• Steigfähigkeit: 70 % (35°)• Kraftstofftank: 265 Liter• Hydrauliksystem: 2x130 L/min Förderleistun
Machine Specifications Wirtgen SP1500 - Base Paver - Year of Manufacture: 2007 - Operating Hours: 9,764 h Wirtgen SP1500 - Top Paver - Year of Manufacture: 2007 - Operating Hours: 10,219 h Wirtgen TCM 1800 - Texture Curing Machine - Year of Manufacture: 2007 - Operating Hours: 8,736 h Find more here - .ucymachines/ Contact us at - sales@ucymachines
EQUIPMENT FOR SPECIAL WORKS Atlas Copco A-66 CLL crawler drilling rig with center fifth wheel on crawler undercarriage, pump foaming agent, double clamp Ø 310 with hydraulic piston puller 20 ton, mast with useful stroke 12.00 m, torque 1300 kgm, 6 cyl Deutz diesel engine. 106 HP Cuoghi LTW mixing plant on slide, production up to 30 mc/h, consisting of hopper with scale for powder dosing, loading auger, 1 mc high-speed mixer, agitator 2.5 cubic meters, vertical injector adjustable flow rate max 120 lt/min and adjustable pressure max 120 bar, air system with 200 L compressor and motorized pneumatic valves, control cabin. Clivio MP/OL 2 electric injector with Ø 50 mm pistons, adjustable flow rate max 50 lt/min and pressure adjustable max 120 bar Soil-Mec SMT turbomixer 285 lt N. 2 Soil-Mec SMA 450 Lt mixers Two-stage electric plastering machine 220 V ...
Cuoghi LTW mixing plant on slide, production up to 30 mc/h, consisting of hopper with scale for powder dosing, loading auger, high-speed mixer capacity 1.0 mc, agitator capacity 2.5 mc, vertical injector adjustable flow max 120 lt/min and adjustable pressure max 120 bar, air system with 200 lt compressor and motorized pneumatic valves, Control Cabin.
The SHANTUI LE60 is a used, fully electric wheel loader suitable for heavy construction tasks, with a robust operational weight of 20 tons. It is powered by a 357 kWh lithium-ion battery, featuring liquid cooling and rated at 537.6 V / 664 Ah. This allows for up to 6–10 hours of usage, with a charge time from 20% to 95% taking approximately 1.25 hours when using a 240 kW charger. Equipped with a 100 kW driving motor capable of a maximum of 200 kW and an 80 kW working motor that peaks at 160 kW, this loader offers impressive torque for demanding tasks. The transmission is an electronically controlled gear system, supported by self-locking differential axles. With a maximum speed of 38 km/h, it efficiently handles operational demands, boasting a lift capacity of 6,000 kg. The hydraulics system delivers a flow rate of 112 l/min, ensuring fast and reliable performance with full cycle times ...
Complete used semi-mobile sand and gravel processing plant available for sale, currently dismantled and in storage at a gravel pit,ready for relocation. What is Included - Complete sand and gravel processing plant - Integrated crushing plant for oversize material up to 60 mm - Transformer station - Office and accommodation container - Workshop and storage container - Full site as shown in the site plan Plant Performance - Feed capacity: 150 to 200 tonnes per hour - Crushing range: 4/8 mm up to maximum 60 mm oversize material Products the Plant Can Produce - 0/1 - 0/4, 0/8, 0/16, 0/24, 0/32 - 0/4 crushed sand - 4/8 - 8/16 - 16/24 or 16/32 - 24/63 or 32/32 - 32/63 - 63/150 Find more here - .ucymachines/ Contact us at - sales@ucymachines
BIG adapter Manitou to Euro, - Self-weight: approx. 170 kg, Dimensions:, Bolt top: Ø 80 mm, Bolt bottom: Ø 36 mm, Bolt spacing (center to center): 350 mm
Caterpillar C9.3B - Unused - 415 HP - arr. 547-7363
used
Key features: Model: TEUPEN LEO 12T Year: 2007 Working height: approx. 12 m Basket capacity: 120 kg (1 person) Machine weight: 3050 kg Permissible wind: 12.5 m/s Maximum lateral load: 400 N Power supply: 230 V – 50 Hz – 16 A Machine Status: The boom lift works properly and is operational for work at height. Note: The battery does not hold a full charge. It works, but possibly need to replace or overhaul the battery.
Manufacturer: Terex Finlay Model: 883 Year of Manufacture: 2010 Machine Type : Mobile heavy duty screener Operating hours: 8867 h Find more here - .ucymachines/ Contact us at - sales@ucymachines
Manufacturer: Kleemann Model: Mobicat MC 102 RH Year of Manufacture: 1999 Machine Type : Mobile Jaw Crusher Operating Hours : Approx. 17,000 hours (counter defective) The Mobicat MC 102 RH is one of the most widely used mobile crushing units in the Kleemann range, valued for its reliability, high throughput capacity, and ease of operation on quarry, recycling, and demolition sites. Find more here - .ucymachines/ Contact us at - sales@ucymachines
Manufacturer: SEBA Model: Lite Track 70-40 New Evolution Year of Manufacture: 2022 Operating hours : 45 h Technical Specifications - Operating weight: 12,000 kg - Transport length: 5,300 mm - Working length: 8,630 mm - Width: 2,420 mm - Height: 2,750 mm - Engine: Yanmar diesel, 53.7 kW / 850-2,000 rpm - Travel speed: 0.7 - 1.3 km/h - Maximum gradient: 30% - Conveyor belt speed: 1.85 m/sec - Hopper capacity: 2.5 cubic metres - Output capacity: 10 - 45 cubic metres per hour - Jaw opening: 700 x 400 mm - Hydraulic jaw gap adjustment: 15 - 100 mm Standard Equipment and Features - Vibrating feeder with pre-screening grizzly - Reversible discharge conveyor for pre-screened material - Remote control for all machine movements, including 2 battery packs - Level sensor at crusher inlet - Magnetic separation belt - Anti-dust system - Lighting for night operation - Video camera moni ...
