other construction machines used for sale (758)

NEW, 1640 kg net weight, suitable for 22 - 31 t excavators, oil flow for excavators 90 l/min, with mounting plate, available with various mounts such as Martin & Lehnhoff mounts

Pneumatic hammer C230G010

Brüel & Kjær Vibration Testing System 4812 + 4801 Shaker Specifications – Exciter Head 4812 • Max. dynamic force: 445 N (100 lbf) with Body 4801 • Current consumption: 23 A RMS with cooling / 11.5 A without • Resonant frequency: 7.2 kHz • Travel: 12.7 mm continuous / 14 mm max • Acceleration limit: 981 m/s² • Bolt Torque Limit: 3.4 Nm • Dimensions: Ø 235 mm × 178 mm • Weight: 8 kg • Material: hard anodized aluminum Specifications – Exciter Body 4801 • Power supply: 380 V ±10% or 440 V ±10%, 3-phase, 50 Hz • Cooling: Air-cooled (integrated fan) • Installation height (without head): 370–405 mm • Additional height due to head: +50 to +130 mm • Weight: 75–80 kg Description & Use: Condition: Used (see pictures). Hint: For detailed technical data and processing instructions, we strongly recommend consulting the or ...

Rated Voltage: 400VAC; 3 phase 4 wire, 50/60Hz, Resistive Load steps, 1, 2, 2, 5, 10, 20, 20, 40kW, Max load power: 100 kW at 400V, Power factor: 1, Cooling type: Forced Air Cooling, Fan Control Power: External power 400VAC 3 phase 4 wire 50Hz; Gross weight [kg]: 35

Perkins 3054 - Unused - 94 kW - Power Pack

Manufacturer: Freight Model: FL80 Year of Manufacture: 2002 Type of Machine : geotechnical drilling unit 10 wheels 8.3 L cumins engine. Perfect mechanical condition CVM good until April 2026 Equipment: CME-75 2002 Low torque mounted Find more here - / Contact us at -

Manufacturer: Genie Model: GS384 RT Year of Manufacture: 2008 Operating hours: 395 h Working height: 12.06 m Measurements (LxWxH): 389 x 213 x 268 cm - Height with handrails lowered: 200 cm Weight: 6806 kg Condition: Fully working, continuously serviced Find more here - / Contact us at -

Caterpillar C13 - Unused - 475 HP - Arr. 360-5974

Caterpillar C18 - Unused - 563 kW - BDN

Manufacturer : FRAVIZEL Model: Lynx + Halley MFCR55 Type of Machine : wire saw systems for block mining in a quarry. Year of Manufacture: 2022 Commissioned: 2023 Condition: The machine is relatively new and have seen little use. Find more here - / Contact us at -

Manufacturer: FRAVIZEL Model: Kepler MFR55 Year of Manufacture: 2023 Commissioned: 2023 Type of Machine : wire saw systems for block mining in a quarry. Condition: The machine is relatively new and have seen little use. Find more here - / Contact us at -

Manufacturer: FRAVIZEL Model: Zenith MFFR90 Year of Manufacture: 2022 Commissioned: 2023 Type of Machine : Drilling Rig Condition: The machines is relatively new and have seen little use. Find more here - / Contact us at -

Manufacturer: Central Mine Equipment Model: 75 Year of Manufacture: 1972 Type of Machine : drill for geotechnics Km Count : 165208 kilometers Find more here - / Contact us at -

Concrete Mixing Plant 1: Manufacturer: ELBA- Model: Supermobil ESM 60 Year of Manufacture: 1998 Status: Decommissioned Technical Specifications: - Rated Output: Approx. 30 m³/h - Dosing Unit: - Loaded by wheel loader - Total capacity: 180 m³ - Four chambers: 4 × 45 m³ (25t each) - Binder Storage: - 3 vertical silos - Each silo approx. 66 m³ (80t) at a density of 1.2 t/m³ - Dosing System: - Aggregates: via weighbelt, 2500 kg - Binder: via container scale, 500 kg - Water: via container scale, 500 kg - Additives: - Two-chamber liquid additive scale, 2 × 12.5 liters, 25 kg total - Mixing Equipment: - 1 EMS 1000C single-shaft compulsory mixer - Concrete discharge: 1,000 liters - Discharge Height: - For truck mixer and truck loading: 4.00 m - Control System: - Fully automatic with computer - Operator container included - Electrical supply: 400 V, 50 Hz, 3-phase, 104 A fuse Concr ...

; Gross weight [kg]: 13500; Accessories: 40FT HC Unused Genset Container

Manufacturer: Jungheinrich Model: EFX 413 Year of Manufacture: 2009 Operating hours: 10,317 Find more here - / Contact us at -

for sale is a construction dryer from Dölco, Year of construction 2022, Equipment:, Hycon 100 moisture meter, Dölco silencer SDM, Fotric323 M thermal imaging camera, leak detection set,, Subject to prior sale, changes and errors!

Mobile pipe layer, self-sufficient: You can find exposé, pictures and videos on our homepage The Mobile Factory is a stationary system originally developed for welding and laying pipelines. Thanks to its crawler chassis, this system can follow the work progress or be deployed on different terrains as needed. In principle, there are no limits to its application areas. Thanks to pre-installed facilities such as electricity, compressed air, hydraulics, lighting, a recreation room, an incineration toilet, a kitchen, and generators, the Mobile Factory is completely self-sufficient. It can therefore also be used in connection with basic services such as pipeline construction. It can also be used as a workshop, production facility, development center, research station or similar. Technical specifications: 1. Mobile Factory complete: 2. Basic module: Highlights: - Pipe magazine for 8 pipes up t ...

Manufacturer: ATLAS COPROD Model: ROC - L7(40) CR Year of Manufacture: 2008 Engine Hours (Old engine) : 8,043 - New reconditioned engine was installed recently. Find more here - / Contact us at -

Manufacturer: Genie Model: GTH-5021R Year of Manufacture: 2016 Mass: 16,653 kg (36,712 lbs) Rated Capacity: 5,000 kg Nominal Power: 83 kW Max Drawbar Pull at Coupling Hook: 30,000 N Max Vertical Load at Coupling Hook: 10,000 N Lifting height: 20.86 m Engine: Perkins 854E-E34TA All-wheel drive Remote joystick Full serviced at 4550 h Extra accessories: - Pallet forks - Bucket - Hook Find more here - / Contact us at -

Caterpillar 3406 DI-T - Used - 187 kW - 6TB

Caterpillar 3306 - Used - 176 HP - 64Z

diamter spiral cutter: 70 - 250 mmspiral lenght: 20.000 mmThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.