mixer used for sale

Revic RX450 Twin shaft paddle mixer Serial: RX1321 2021, Stainless twin shaft paddle mixer, Variable speed, forward and reverse, 450L capacity, with stainless lid, comes with tote bin hoist which mounts onto the side of machine, 3Ph

Used bachiller model PC-200 stainless steel vacuum mixer. 338 litre total capacity, 126-200 litre working capacity. Mixing bowl approximately 866 mm diameter x 650 mm straight side. Flat top and inverted dished bottom rated full vacuum. Stainless steel jacket rated 3 bar pressure. Anchor agitator with teflon scrapers driven by 2.2 kw 220/380 volt 3/50 1415 rpm or 2.55 kw 440 volt 3/60 1715 rpm motor through sabre model mas55df gearbox 69:1 reduction ratio. Approximately 220 mm diameter dispersion blade mixer direct driven by 7.5 kw 380 volt 3/50 1450 rpm or 8.6 kw 440 volt 3/60 1755 rpm motor. Lid raised and lowered by 0.55 kw 220/380 volt 3/50 1400 rpm or 0.63 kw 440 volt 3/60 1695 rpm hydraulic power pack. New 1987.

Paint mixer Busch FM 20; Capacity 20kg; mobile. Ink mixer Busch FM 20; capacity 20kg; mobile.

Mixer and dough mixer HOBART, type: H600-38 - 60 litre boiler capacity - with 1 bowl - 2 Tools - Condition: Very good, technically tested - Boiler capacity: 60 liters -El. Connection: 380-415 V, 50 Hz, 3PH, 1.5 kW, 3.2 A Inspection and test run are of course possible by arrangement.

Henschel FM75C High speed mixer Stainless bowl and mixer, 75L capacity, jacketed, manual discharge valve, with Eaton variable frequency drive, 3Ph

Alimex Paddle Mixer M 400 Year of manufacture: 2021 / new machine Volume: 400 liters Max. filling: 300 kg Speed: 1 forward speed and 1 reverse speed each Power: 4.4 kW / 400 Volt Alimex Paddle Mixer M 400 Year of manufacture: 2021 / new machine Volume: 400 liters Max. Loading: 300 Kg Speed: 1 forward speed and 1 reverse speed each Power: 4.4 kW / 400 V

Insulated tank-mixer with a capacity of 25,000 liters. Mixer for thick mass

Useful capacity of the product tank: 50 liters Total capacity up to the edge of the tank: 80 liters Operating overpressure in the product tank: -1/+2.0 bar Maximum temperature in the product tank: 125 °C Operating overpressure in the double envelope: 4.0 bar Maximum temperature in the double envelope: 140 °C Stainless steel: 1.4435 1350 kg Variable speed of motors: Outer arm mixer: 11-44 rpm Inner arm mixer: 21-84 rpm Homogenizer: 1150-4350 rpm, Volume: 80 liters , Useful volume: 50 liters , Hustle: 3 types of agitation: outer arm / inner arm / homogenizer , Elec: 380 V / 50 Hz, Cover diameter: 119 mm, Mobile tank: No, Double envelope: Yes, Double envelope volume: 13 liters , Double envelope pressure: 4.0 bar , Weight (kg): 1350

Planetary mixer Rego PM100 E - Planetary mixer Rego - Type: PM100 E - Power: 11 kW - Volts: 220 / 380 - Amp: 25

VOLBERS WINE MIXER WITH VARIABLE AREA FLOW METER VOLBERS mixer consisting of: Variable Area Flow Meter Atomization section with sight glass on a stand C0² Injection Device

Silverson GX15-1500 High shear mixer on stand High shear mixer on stand, shaft length 860mm, head diameter 170mm, mobile, 3Ph

Silverson GX10 1500 High shear mixer Stainless, high shear mixer, shaft length 1150mm, head diameter 170mm, 3Ph

Loedige FKM 600 Ploughshare mixer, total capacity 600 ltr., net capacity 420 ltr., with double jacket, cooling/heatable, mounted on frame, drive 37 kw., 400 V. Loedige Plow Share Mixer, Type FKM 600, total Volume 600 ltr., working Volume 420 ltr., with doubel Jacked, for heating or cooling, Frame mounted, Drive 37 Kw.

Fence and mixer Rego SM2DescriptionA used fence and mixer Rego SM2 revised and repainted. Manufacturer: Rico-Rego GmbH Mechanical EngineeringType: SM2Condition: revised and repaintedFor max. 20 litresWith automatic running via timerManual runningStirring and beatingNew paintedMany parts have been renewed

Manufacturer : Ruberg Mischtechnik (Amixon) Type: Single shaft drum mixer / ribbon mixer for powders Model: EM 200 Year : 1996 Total volume: 330 L Useful volume: 290 L Drum diameter 770 mm - height 720 mm Stainless steel ribbon for mixing Electric vibrator for powder unclogging at exit Pre-equipped with blade cutter but currently without motorization or blades. Manual discharge valve with remote handle and locking system Tilting/righting: 3 positions Mixing: 2 speeds Remote control panel Sold with 3 stainless steel tanks / drums: ? 550 mm x 830 mm - volume approx. 190 L

Description: • Concrete mixer truck • Spanish registration number: 3027 DBK • Frame number WJMJ3JRS00C132712 • IVECO CURSOR D-F3BE0681GB engine: 6 cylinders, displacement 12882 cc, power 280 KW • Maximum total weight 32000 kg, death weight 13972 kg • Mileage 399905 km according to the counter • BARYVAL ANN-10/01 concrete mixer: serial number 14665, capacity approx. 10 m³ • This vehicle is delivered with only one set of keys • Ownership change costs will be paid by the buyer • MOT certificate costs will be paid by the buyer • The buyer is responsible for passing MOT in order to circulate in Spain • IMPORTANT: • The buyer is responsible for everything related to the loading of this equipment • Surplex will deliver this vehicle to the buyer with a Sale Notification in DGT (Spanish traffic authorities). Approx. Onsite Dimension. (l x w x h): 9,600 x 2,500 x 3, ...

Bowl For Spiral Mixer Diosna SP 160 Condition: new Capacity in dough: 160 kg Capacity in flour: 100 kg Bowl content: 260 l Bowl diameter: 840 mm Bowl height from floor: 879 mm Compatible with all Diosna spiral mixer models SP, SPV, PSPV 160

Horizontal batch mixer with 630 l. gross capacity, pneumatically operated discharge gate (new cylinder), 37 kW drive, Flender gearbox (N2 = 58,58 RPM) and hard metal plated mixing tools. Refurbished in 2016, very good condition.

Farrel Pomini model F620 Banbury internal mixer, net mixing chamber volume: 710 litres Machine number 6515. Original year of manufacture: 1972, but body replaced 1998 approx batch weight at SG 1 - 533kg, 4 wing rotors, drilled sides, fully stellite welded chamber, rotors and floating weight, S.S.A. dust seals, hydraulic drop door with linear actuator, pneumatic hopper, unidrive gearbox with 2 x CEM 1475kW, 1550A, 1000V, 800/1000rpm DC variable speed motors, Drive controls included, but operator controls not available. In good condition (only used for tyre compound masterbatch). Spares available: Door top (new), hinge shaft (new), 2 x dust seals, hopper seals and bearing seals.

Type: HM 200, high-performance mixer, partly in VA, Y:00, 1987, 6.5 / 9.5kW, 2 knife heads, control cabinet, completely on base frame, drives can be polum-switched.

Type: VGL 5000. Double-current mixer in standard steel version with 5,000 l. useful content, cylindrical mixing tank and conical bottom, with vertical middle screw, distribution arm and power line controller, rectangular connector for pocket filter, manhole, lower Screw bearing with air flushing, pneumatic flat slider at the outlet.

Segment belt screw mixer with discharge screw, make baurmeister type:BE 2000, BJ. 1990, Wekstoff stainless steel, capacity 2000 liters, drive power 5.5 kW.

Type: VGL 5000. Dual-flow mixer in carbon steel design with 5.000 l. net capacity, cylindrical mixing container with conical bottom, with vertical center screw, divider arm and flow disc, rectangular connection for pocket filter, manhole, lower screw bearing with air flushing device, pneumatic flat valve at output.

WESTFALIA MZA 10 inline dynamic mixer, capacity depending on product.

1 x Farrel model F270 Banbury internal mixer, Machine number: 98M5023, Year 1999, 270 litre capacity, 2 wing rotor design, FYH type dust seals, Hydraulic drop door with linear actuator, Process oil system, Pneumatic hopper. with semi unidrive gearbox, AC variable speed motor, 550V (includes 11kv > 550v transformer). Alstom \Syncdrive\ AC variable speed drive controller, 1265 KVA, 550V, digital drive new in 2001. With Promtec Control system (complete but PLC missing). In feed conveyor and dust extraction system also available if required (at additional cost). Spare motor also available. Complete and in good condition (still installed at a factory in UK).

Farrel Pomini Model OOC Lab Banbury Internal Mixer machine number: 7511, Year: 1976 Net Volume: 4.24 Litres pneumatic hopper 30kW DC variable speed motor. Complete with control panel etc and in very good condition.

Thyssen Krupp model GK270NC Banbury type internal mixer, 4 wing tangential rotors, Year of manufacture: 2003 Latest Continental design chamber! Hydraulic hopper + power pack. Body and hopper only in good condition. Unidrive gearbox and motor can be quoted for if required (same centres as 11D or F270).

1 x Farrel model F270 Banbury internal mixer, Machine number: 98M5007, Year July 1998, 270 litre capacity, 2 wing rotor design, FYH type dust seals, Hydraulic drop door with linear actuator, Process oil system, Pneumatic hopper. with David Brown unidrive gearbox, serial no GS50277, Leroy Somer Type LSM54 L76P 1492kW AC motor, Dec 2001, RPM 1000/1200, 750V (includes 11kv > 750v transformer). Output rpm 49.8/43. Alstom \Syncdrive\ AC variable speed drive controller, 1940 KVA, 750V, digital drive new in 2001. With Siemens S5 Control system. In feed conveyor and dust extraction system also for sale if required. Spare refurbished Leroy Somer motor also available. Complete and in good condition (still installed at a factory in UK).

Material: stainless steel Volumes: 3,000 litres new machine We build the mixer you require. Do you need a whole plant from used or new components? Write us below!

1 x Carter model MK3 Plus Banbury internal mixer, Serial number: 8-77, Year: Sept 1977, Chamber volume 90litre, approx batch weight: 85kgs, pneumatic hopper, S.S.A. type dust stops, Oil cooled roller bearings, hydraulic drop door + linear actuator, cored rotors with rotary joints fitted, flood cooling to body, standard bullgear drive with 150kW, 495rpm, 3ph,m 50Hz, 380/415V slip ring motor and starter. Key interlock safety system. Complete with all operator controls, pneumatics, hydraulics etc and in good condition.

1 x Farrel Bridge model 11D Banbury internal mixer, machine number: 90R2022, Year: July 1991, Pneumatic hopper + extension neck, SSA dust seals, 2 wing rotors, Hydraulic drop door with Linear actuator, Wyco semi unidrive gearbox, with 875Kw, 440V AC variable speed motor with Alston syncdrive controls. In good condition.

1 x Farrel Banbury internal Mixer, Model 00C. Machine number: 91M7017, Year: 1992, Stainless steel jacketed swing side (drop door design). Maximum steam or water pressure 150psi, chrome plated two wing cored rotors with spherical roller bearings, gross capacity of mixing chamber 4.24 liters. 5" Diameter ram cylinder, maximum pressure 100psi. Chrome plated single slope V-bottom, stainless steel, pneumatically operated front door, F.Y.A. dust stops, oil seals, oil injector, thermocouple. With 65kw (87hp), 340/440 volt, 1500 rpm motor, reducer ratio 15:1. Unit mounted in an enclosed cabinet with a pull-out discharge drawer. Includes an operator panel. In good condition.

used lime-wash mixer material: Metal height: 4.00 m with engine width: 2.00 m diameter: 2.00 m connections: below, on top mixing works: yes Revideckel: yes

with 132 kW E-drive, mixer: approx. 3150x1000mm, inlet-opening: 750x750mm, discharge opening: 1200x530mm, semi-mobile steel construction with ladder and platform, ideal for earth mixtures, throughput: -100 cbm/h

The powder mixer can be used in any situation where powder is first added and then dissolved in the liquid. Capacity up to 100 kg/min, depending on product properties. Including stainless steels preparation table. Engine power 7.5kW. Equipped with overhauled centrifugal pump. ( Frsistam, Alfa Laval, or equivalent) As good as new.

Stainless steel mixer Content 4 litres Power 1.1 kW for powdered to pasty products 2 pieces available

Code: 0553 Brand: FIN Model: ME/10 Mixer for glue and varnish - Motor Hp 1,7 - Overall dimensions: mm 500 x 400 x 1000 h - Weight kg 20 E

Mixer,aluminium,Stephan type UM80

HORIZONTAL MIXER

V-mixer made of stainless steel with a capacity of 400 liters equipped with intensifier bar (prepared for inerting or liquid injection) to improve mixing. Feeding through the two upper mouths with manually removable lid and discharge with butterfly valve of 200 mm in diameter. The intensifier bar engine is 5.5 hp (1430 rpm) With electrical panel. General characteristics: Material Stainless steel Weight 640 kg General dimensions: Overall length: 3150 mm Total height: 1600 mm (3000 mm with legs) Overall width: 850 mm Electrical panel: 1800x800x310 mm Specifications: Volume 400 L Engine 3 PS - 1500 rpm Reducer 22 rpm (i= 41.8) Agitation Intensifier bar

Diosna spiral mixer W120 a with 2 boilers -completely overhauled -New bearings, new belts, new switch, new buttons, new friction, etc. -2 speed -2 Watch -2 edelsthal boiler -For 120kg dough Price: 19 000 EUR with transport

SUMAB Smallest Automatic concrete plant SUMAB MINI The SUMAB MINI is a perfect match for you whether you produce concrete for your own project or need material to produce concrete elements. Technical details: • Easy to put it inside the building and build your concrete element factory. • Designed on a container frame. • 2 aggregate storages, • pan-mixer 500/300 liters. • Water tank 200 liters. • Automatic control of a plant: computer (20 concrete recipes). Concrete plants made by SUMAB are the definition of quality, durability and reliability. Our batching plant are made using Scandinavian technology and components from leading European manufacturers! We offer Scandinavian quality at the best price! If you need more information, you can visit our website, or send a request and we’ll help find the best solution for you!

Intended for mixing meat mixtures and spices in order to obtain a homogeneous mixture. All stainless machines. The mixer can also be used to mix a smaller amount than the maximum capacity. The mixture is easily unloaded - by tilting the cauldron forward. Reverse system, mixing in both directions. Clarification: the price of the machine is for a floor model. Machine legs – long or short – are available as an option Power Mn 1100 W Tf 1472W Electrical connection 230-400V/50Hz Dimensions of the vessel mm 410×480 Capacity kg./ l. 50/88 A 750 mm B 465 mm C 1250 mm D 595 mm E 1120 mm F 150 mm G  ...

Intended for mixing meat mixtures and spices in order to obtain a homogeneous mixture. All stainless machines. The mixer can also be used to mix a smaller amount than the maximum capacity. The mixture is easily unloaded - by tilting the cauldron forward. Reverse system, mixing in both directions. Clarification: the price of the machine is for a floor model. Machine legs – long or short – are available as an option Power 1100 W mono 1472 W trif El. power supply 230-400V/50Hz Dimensions of the vessel mm 300×390 Capacity kg/l 30/42 A 680 mm. B 365 mm. C 1120 mm. D 530 mm E 975 mm F 150 mm G 650 mm L 440 mm M 940 mm N 610 mm O 1010 mm Weight: kg 49 Package sizes: mm 720x570x770 Weight: kg 59

1 x Farrel Pomini model F160 Banbury internal mixer, Original year of manufacture: 1980, but rebuilt in 2000 (very good condition), Chamber volume: 160L Net batch size: 120kg, With 2 wing type rotors, Rotor tips hard material coated and fully chrome plated Rotor speed max 50rpm, pneumatic hopper, hydraulic drop door, FYH dust seals, Unidrive gearbox, With 435kw DC variable speed motor and electrical controls (415V). Complete and in good condition.

Intensive mixer with horizontally aligned mixing drum, 1,500 l. useful filling, with 45 kW inoperable drive (stern wirbler, 16 knives in 8 layers, 455 UPM), 2 x 11 kW star drive, 15 kW drum drive and 3 kW hydraulic unit for automatic closure / central ground emptying. Mixing drum lined with steel, wall-to-floor scraper made of carbide, mixing blades made of wear-resistant plastic. Mischer was overhauled by a specialist company in 2005; little has been going on since then.

Machine name: Paddle dryer used Manufacturer: AVA / Holland Merten GmbH Type: HTK 200 Year of construction: 2002 Speed: 107 rpm Material: Stainless steel Drive motor: 5.5 KW Version: EExdellCT4 Total capacity: 235 liters Wetted parts: stainless steel 1.4571 Gearbox:Helical gear motor Equipment: Double jacket, mechanical seal, wave heating Dimensions: L 3400 x W 1100 x H 1500 mm Empty weight: approx. 1600 kg Tech. Documentation: yes available Note: Operating temperature 130°C Design temperature 200°C Internal pressure mixer -1/+3 bar Pressure double jacket +6 bar Accessories: Base frame, Maierkopf HWR 225 Condition: Used very good Price: on request

Leading Jet mixer Manufacturer: Ystral Type: Y 11,000 L / TFW - 4 D Year of construction: 2003 Technical data: Power: 11 kW / 15 HP Revolutions: 1,465 U/min Voltage: 230 / 400 V Frequency: 50 Hz Weight: 150 kg In very good condition!

3 liter laboratory mixer -Container V2A -Container to remove -Drive 1 motor frequency controlled

Spiral mixer BOKU, type: Th SK 240-áberholt-- incl. 3 retractable boiler â for up to 240 kg dough - including delivery. The machine is being over Germany after order confirmation.