We use cookies to optimize our website for you and to be able to continuously improve it. By continuing to browse the site you are agreeing to our use of cookies.
Disagree
Manufacturer:
(Category: 103-174)
used
x-travel: 300 mmy-travel: 135 mmz-travel: 300 mmspindle turning speed range: 100-2000 U/mintable-size: 590x210 mmweight of the machine ca.: 0.6 tDigital read-out 3 axeswww.marcels-maschinen.ch The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
used
universal milling machine ACIERA F3V Year of construction unknown with accessories
used
Procedures x way 500 mm y way 320 mm z-way 420 mm table 350 x 900 mm Speed 50-3400 RPM. Recording ISO 40
used
Vertical Milling Machine Fabr. BOHLE type FS 15Year of construction 1974Table size: 1400 x 420 mmSpindle mount: ISA 50Distance spindle to stand: 400 mmSpindle speeds: 27 - 1400 rpm.Feed rates stepless: 8 - 3150 mm / minDrive power: 11 kWDimensions L x W x H approx: 2200 x 2000 x 2200 mmWeight approx: 3500 kgWith- Control pendulum- swiveling head- rapid traverse and creep speedused, in good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools
used
CME FU2 universal milling machine. Table: 1400x300mm. Longitudinal travel: 1050mm. Cross travel: 300mm. Vertical travel: 500mm. ISO40. Hure head. Speeds range: 12. (40-1800rpm). Motor power: 7,5Kw. DRO Fagor for 3 axis.
used
Description: SPECIFICATIONS Character: Comu Type: B 1000 Order: Fagor Table length: 1,520 mm Table width: 425 mm X: 1,000 mm Y: 500 mm Z: 500 mm Speed: 400-4000 rpm Intake: ISO 40Approx. Onsite Dimension. (l x w x h): 2,500 x 2,800 x 2,600 mm, weight approx.: 3,600 kg
used
Universal tool milling machine make DECKEL type FP 1Mash. -No: 54203/08Technical specifications:Longitudinal movement of the table X 250/245 mmTransverse movement of the headstock Y 150 mmVertical movement of the table Z 340/335 mmSpindle mount ISA 40Speeds 40 - 2000 rpmvertical table slide 550 x 195 mmQuill stroke of the vertical milling head 60 mm12 feeds longitudinal and vertical 9.5 x 475 mm / minDrive power 1.2 kWDimensions 700 x 1000 x 1600 mmWeight approx 560 kgWith- Digital display- separate control cabinet- Chip collecting panused, in good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools
used
Universal tool milling machine make DECKEL type FP 1Mash. -No: 54833/08Longitudinal movement of the table X: 250/245 mmTransverse movement of the headstock Y: 150 mmVertical movement of the table Z: 340/335 mmSpindle mount: MK 412 Hor.-speeds: 60 - 1200 U / min12 Vert.-speeds: 95 x 1900 rpmvertical table slide: 550 x 195 mmQuill stroke of the vertical milling head: 60 mm12 feeds longitudinal and vertical: 9.5 x 475 mm / minDrive power: 1.2 kWDimensions: 700 x 1000 x 1600 mmWeight approx: 560 kgWith- rigid angle table- several tool holders- original vice- separate electrical cabinetused, in good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools
used
Universal tool milling machine DECKEL FP 1 with 3 axis active digital display Heidenhain TNC 113 Year of construction: 1987 Travel: X 300 Y 160 Z 340 Speed range: 40 – 2000 rpm With the following accessories: Universal table 600 mm x 250 mm clamping surface Movable vertical milling head Extendable drill quill Infinitely variable feed via potentiometer 1 machine vice 1 counter holder with counter bearing 1 pc. milling mandrel long 0 22 mm Various tool holders S 22 x 2 Bellows Z Axis Machine light Automatic central lubrication pump Chip collection plate Coolant system Operating instructions THE MACHINE IS IN VERY GOOD CONDITION
used
Universal tool milling machine make DECKEL type FP 2Mash. -No: 45731Table length travel: 390/400 mmTable height path: 390/400 mmHeadstock cross-section: 190/200 mmHorizontal spindle extendable: 100 mmTable mounting surface: 740 x 255 mm18 spindle speeds: 40-2000 rpm.Spindle mount: ISA 4018 automat. Feeds: 8 - 400 mm / minRapid traverse: 1200 mm / minDrive power: 2.2 kWDimensions: 1550 x 1400 x 1410 mmWith- rigid angle tableused, in good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools
used
CONTROLS CNC controls DECKEL DIALOG 4 WORKING RANGE -CUBIC- number of processing axes (excl parallel axes): 3 X-axis travel: 400 mm Y-axis travel: 320 mm Z-axis travel: 400 mmTABLE table surface (left-right): 700 mm table surface (front-back): 460 mm workpiece load (max): 350 kgSPINDLE / HEAD spindle revolutions (min): 63 /min spindle revolutions (max): 6300 /minAXIS DRIVES feed velocity (min): 2 mm/min feed velocity (max): 3600 mm/min rapid traverse: 4000 mm/minELECTRICAL SPECIFICATIONS mains voltage: 400 V mains frequency: 50 HzDIMENSIONS / WEIGHTS space requirements -left/right-: 3200 mm space requirements -front/back-: 3200 mm total weight approx.: 2000 kg
used
Description: Travel: X: 560 mm Y: 500 mm Z: 390 mm  , Vertical milling head as folding head vertical and horizontal spindle milling head manually tiltable +/- 90 rapid traverse: 4 m/min table load: 800 kg speed range: 4000 rpm spindle support: SK 40 headstock speed range: 4000 rpm spindle drive: 4 kW control: Dialog 11 electr. handwheel Coolant system Documentation Total power: 19 kW Approx. Onsite Dimension. (l x w x h): 2,000 x 2,300 x 1,800 mm, weight approx.: 2,500 kg
used
Description: Travel: X: 560 mm Y: 500 mm Z: 390 mm  , Rotary table Vertical milling head as folding head vertical and horizontal spindle Milling head manually tiltable +/- 90 rapid traverse: 4 m/min table load: 800 kg speed range: 4000 rpm spindle support: SK 40 headstock speed range: 4000 rpm spindle drive: 4 kW control: Dialog 11 electr. handwheel Coolant system Documentation Total power: 19 kW Approx. Onsite Dimension. (l x w x h): 2,000 x 2,300 x 1,800 mm, weight approx.: 2,500 kg
used
Description: Control: Dialog 4 Axes: X-way 1170 mm Y-way 500 mm Z-travel 370 mm  , spindle mounting: SK 40 speed range: 25 - 6300 rpm feed range: 4 - 2000 mm/min rapid traverse: 4 m/min table clamping area: 1400 x 550 mm drive power - milling spindle: 2,0/4,0 kW Approx. Onsite Dimension. (l x w x h): 2,000 x 2,300 x 2,100 mm, weight approx.: 4,000 kg
used
x-travel: 300 mmy-travel: 150 mmz-travel: 340 mmtable-size: 600x260 mmspindle taper ISO: 40 spindle turning speed range: 40-2000 U/minweight of the machine ca.: 0.7 tVisit us on www.marcels-maschinen.ch The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
used
- X: 300 mm - Y: 150 mm - Z: 340 mm - Clamping surface: 600 x 210 mm - Speed range: 40 - 2000 rpm - Spindle mount: SK 40 - Spindle drive: 1.7 kW - Digital display: 3-axis DITRON Digital - Total power: 1.7 kW - Machine weight: 830 kg - Space requirements (W x D x H): 1.2 x 0.9 x 1.7 m - Condition: good Details good condition, ready for immediate use Accessories Counter holder, dividing head
used
fully functioning used 3 axis milling machine, brand lid, type FP2, with vice, and many accessories.
used
with digital read-out: Activ make: HEIDENHAIN for axes: 3 x-travel: 500 mmy-travel: 400 mmz-travel: 400 mmhorizontal milling head:: tool taper: ISO 40 vertical head:: tool taper: ISO 40 vertical movement of the milling spindle: 90 mmspindle turning speed range: 50-2500 U/minnumber: 18 feed stepless: 6.3-630 mm/minrapid motion -longitudinal/cross/vertical: 1.3 m/mintotal power requirement: 3.7/4.4 kWdimensions of the machine ca.: 1.3x2.0x2.0 mweight of the machine ca.: 1.8 tfixed working table:surface area: 800x460 mmvice: jaw width: 125 mmcollet chuck: 1 number of collets: 11 boring chuck: 1 milling arbors: 7 coolant: The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
used
Description: SPECIFICATIONS Feature: Lid Type: FP5NC Steering: Dialog 4 Year of construction: 1986 Sheet size: 1,000 x 500 mm Spindle top name: ISO 40Approx. Onsite Dimension. (l x w x h): 2,300 x 3,800 x 2,500 mm, weight approx.: 6,000 kg
used
Milling machine from a training workshop in very good condition Manufacturer lid Type FP1 Active
used
Machine : Vert. Head Make : DECKEL, MAHO, WMW, ... Are all swivel and with quill ! A - Universal milling head, COVER, from FP3, SK40, with quill stroke 80mm, tool clamp with hydraulics and control panel. swivel, price: 1400,- B - Universal milling head, MAHO, SK40, with quill and autom. Tool clamping, swivelling, L-33cm, W-30, H-60, swivel device, flange φ approx. 250mm Price : 1600,- Would also have milling spindles - SK30 - SK40
used
- Accessories available. - Digital display Heidenhain. Workspace: Travel in X/Y/Z 300/200/350 mm Spindle nose table distance 80 – 430 mm Rapid traverse 1200 mm/min Working feed X/Y/Z manual 50-550 rpm Feed force in X/Y/Z manual 8 kN Clamping surface (rigid angle table) 600 x 200 mm Max. table load (rigid angle table) 50 kg Vertical milling head: Speed range 80-2200 rpm Power 1.4 kW Tool holder SK30 Dimensions: Length x width x height 1150 x 1410 x 1550 mm Weight approx. 500 kg
used
Digital display Heidenhain. Carriage travel range Sledge travel longitudinal (X) 450 mm Sledge travel transverse (Y) 300 mm Sledge travel vertical (Z) 350 mm Clamping surfaces 800 x 400 mm Tool holder SK 40 Quill stroke 100 mm Swivelling vertical milling head ± 90° Speed range 50-2500 rpm Dimensions: Length 1485 mm Width 1475 mm Height 1475 mm Weight approx. 1500 kg
used
X-axis: 775 mm Y-axis: 250 mm Z-axis: 425 mm Table dimensions: 1100 x 240 mm Spindle Holder: ISO40 Spindle speeds: 48 - 1500 rpm. Equipped with: - Feed on all axes -Vice -Cap - Milling tools - Useful storage - Horizontal spindle Motor power: 2.2 kW Country of origin: Spain Machine LxWxH: 1600 x 1300 x 1600 mm Machine weight: 1200 kg
used
Year of construction 2020 Control Heidenhain TNC 620 Speed [rpm] 4500 Travel X/Y/Z [mm] 420/350/400 General: Year of construction 2020 Control Heidenhain TNC 620 Travel X/Y/Z 420/350/400 mm Speed 4,500 rpm Spindle: Technology Gear Spindle Speed 4,500 rpm Power 7 kW Torque max. 340 Nm Tool holder SK 40 Head: Swivel range +/- 90° (manual) Quill 80 mm (manual) Tool clamp hydromechanical Horizontal Spindle Yes Angle table: Clamping surface 630 x 400 mm Table load max. 300 kg Equipment / Accessories: Displacement measuring systems directly in all axes Single-entry operation Electronic handwheel Coolant supply coolant pump
used
Technical data of the FPT Pragma M40 mobile column milling machine used: Longitudinal travel: 4000 mm Vertical travel: 1600 mm Transversal travel: 1200 mm Working feeds: 0-15000 mm/min Fast feed: 30000 mm/min Maximum thrust on axes (X,Y,Z): 2000 from N Spindle motor power (continuous service S1): 28 kW 38 hp Spindle motor power (intermittent service S6-60%): 35 kW 47,6 hp Constant torque spindle speed range: 0-312.5 g/min Spindle speed range at constant power. 312.5-5000 rpm Maximum spindle torque (continuous service S1): 856 Nm Maximum spindle torque (intermittent service S6-60%): 1070 Nm Supply voltage: 50Hz Current consumption: 119,2A Total installed power: 65 kW 88,4hp
used
- workpiece diameter d680 - max workpiece length 3400 mm - max working lengths 2600 mm - with discs (d1100 mm) - required electric capacity 60 kW/h - under power, in use
used
Universal milling machine Make GRUPP Type UF 2 Type LVQEYear of construction 1971Table size: 1000 x 275 mmTable longitudinal path X: 900 mmCross table Y: 220 mmTable vertical Z: 450 mmThe table can be tilted to either side: 45 °Spindle diameter: 70 mmSpindle mount: MK 412 spindle speeds: 45 - 2000 rpm.24 longitudinal and transverse u. Vert. Feed rates: 8 - 350 mm / minDrive power: 4 kWFeed motor: 1.3 / 1.6 kWtotal power consumption: 5.7 kWDimensions L x W x H approx: 2200 x 1600 x 1950 mmWeight approx: 1630 kgWith- Vertical milling head VKUP (universal swiveling)- Cooling deviceused, in good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools
used
Universal milling machine Speed 90 - 2000 rpm x 650 mm Y 300 mm Z 400 mm Feed rate in x electric Coolant pump Accessories Weight 1 ton
used
Description: Drilling and milling machine with Powerful 2-speed motor. Recording MC 3 - B16. Drill chuck 3 - 16 mm. Left/right switch. Spindle protection. Fine tuning. ejection wedge. Clamp the threaded rod for the tool Related tools. Drilling capacity in steel 32 mm Projection 200 mm Drilling stroke 70 mm Capacity of the end mill 16 mm Spindle mount MK3 Spindle speeds 50 - 3000 rpm Table adjustment transversely 220 mm Table adjustment lengthwise 425 mm Table clamping surface 700 x 210 mm Connection voltage Vmax. Distance between work table and spindle nose 470 mm Total power requirement 1.5 kW Machine weight approx. 230 kg Space requirement approx. 0.75 x 1.05 x 1.2 mApprox. Onsite Dimension. (l x w x h): 750 x 1,050 x 1,200 mm, weight approx.: 230 kg
used
Description: Drilling and milling machine with - Cross Support - Feed via hand crank - Chip protection - 16mm drill chuck - mechanical MK tool clamping Drilling capacity in steel (diameter) 16 mm Projection 180 mm Drilling stroke 85 mm Spindle mount MK 2 Spindle diameter 47 mm Spindle speeds 320 - 3300 rpm Table adjustment across 230 mm Table adjustment along 100 mm Table mounting surface 420 x 155 mm Connection voltage 230V Total power requirement 0.75 kWApprox. Onsite Dimension. (l x w x h): 900 x 600 x 300 mm, weight approx.: 80 kg
used
Vertical console milling machine make HECKERT type FSS 315 SMachine -No: 314212/2 Year 1992Table longitudinal path X-axis: 950 mmKonseol vertical path Y-axis: 450 mmTransverse Z-axis: 500 mmCross slide cross travel: 270 mmTable size W x L: 430 x 1600 mmNumber of clamping stages: 4Table load: 1000 kgSpindle mount: ISA 4018 speeds: 28 - 1400 rpm.18 feeds lengthwise: 16 - 800 mm / minxa0xa0xa0 vertical: 5 - 250 mm / minRapid traverse longitudinal and transverse: 3150 mm / minRapid traverse vertical: 1000 mm / minDrive power: 1.5 kWConnected load: 8.0 kWDimensions: 2800 x 2800 x 1995 mmWeight approx: 3000 kgWith- swivel spindle head- tableau control- Control cabinet SIEMENS- Central lubricationused, in good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be ple ...
used
Universal console milling machine make WMW HECKERT type FU 355 x 1250Masch. -No: 47512/1962 built in 1962Table mounting surface: 355 x 1250 mmTable can be swiveled 45 ° on both sidesTable can be swiveled: + - 45 °Table longitudinal path X: 1120 mmCross slide cross travel: 345 mmConsole vertical path: 400 mmTable load max .: 1500 kgSpeed range: 28 - 1400 rpm.Feed area longitudinal and transversal: 16 - 800 mm / minFeed range vertical: 5 - 250 mm / minRapid traverse longitudinal and transverse: 3150 mm / minRapid traverse vertical: 1000 mm / minTool holder: ISO 50Drive power: 14.5 kWWeight: 3850 kgExternal dimensions: 2400 x 2300 x 1800 mmused, in good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available ...
used
Description: serial number: 7786 travels: X-axis: 810 mm Y-axis: 280 mm Z-axis: 410 mm table dimensions: 1250 x 250 mm distance between spindle table surface: 40 - 450 mm Approx. Onsite Dimension. (l x w x h): 1,800 x 1,700 x 1,800 mm, weight approx.: 3,500 kg
used
Description: Control: Heidenhain TNC 124 Table: 800 x 400 mm Travel distances: X / Y / Z: 500 / 430 / 400 mm Quill stroke: 80 mm Spindle holder: SK 40 Spindle speeds: 71 - 3550 rpm Power requirement: 6 kw Approx. Onsite Dimension. (l x w x h): 1,800 x 1,800 x 1,900 mm, weight approx.: 2,000 kg
used
Universal milling machine Hermle UWF801 Year of construction ca 1990 Active Digital Display Heidenhain TNC114 Travel: X-travel: 500 mm Y-travel: 430 mm Z-travel: 400 mm Spindle holder ISO: SK40 Control: TNC 114 Spindle head swivels left and right: right/left = 90° ° Quill stroke vertical: 80 mm Speed range: 50 - 2500 / 18 rpm Feed rate: X/Y: 4 - 1600 mm/min Feed rate: Z: 4 - 1000 mm/min Rapid traverse: X/Y: 1.6 Rapid traverse Z: 1 m/min Spindle drive: 3 kW Weight approx.: 1500 kg Dimensions: LxWxH: 1.6 x 1.5 x 1.8 m Accessories/Equipment: - Angle table - Fixed table (table size: 800 x 395 mm) -Operating instructions - Machine feet - 4pcs tool holders - Chip drip tray - Hydraulic tool clamping - Coolant device - Machine light The machine has been technically tested and is fully functional Spindle concentricity 0.004mm Reversing ...
used
Table dimensions: 800 x 220 mm X-axis: 510 mm Y-axis: 450 mm Z-axis: 410 mm Spindle Adapter: ISO40 Speed range: 45 - 2000 rpm. 3-axis digital readout: Heidenhain Equipped with: - Spindle drill quill - Machine clamping - ISO recordings Country of origin: Germany Engine Power: Machine weight: 1400 kg Machine LxWxH: 230 x 230 x 170 cm
used
Machine type milling machine - universal brand HURON type MU 5 year 1975 control type conventional storage France country of origin France delivery immediately cargo base camp, free truck Technical details x way 1300 mm y path 700 mm z-way 550 mm table size 1500 x 460 mm spindle speeds 15-2500 RPM spindle retainer for SK 40 feed range x - direction 1,6-820 mm / min feed Empire z-direction 1,6-820 mm / min rapid traverse X + Z - axes 2.8 m/min rapid traverse y - direction of 2.8 m / m in power - spindle motor 10 kW total power 14 kW machine weight approx. 4.6 t additional information good condition with 3 axis of DIGITAL HEIDENHAIN SK 40 BUILT IN 1975
used
Description: Equipment: - Digital display - Horizontal spindle - Quill with hand feed - motor feed for X - Left/right running - Emergency stop switch - Drill head swiveling - Spindle protection - Machine light Drilling capacity in steel 25 mm Drilling stroke 150 mm Spindle mount ISO 40 Spindle speeds vertical 115 - 1750 mm Table adjustment transversely 600 mm Table adjustment lengthwise 350 mm Table adjustment vertical 350 mm Table clamping surface 800 x 240 mm Connection voltage 400 V Total power requirement 1.5 kW Machine weight approx. 0.7 t Space requirement approx. 1.6 x 1.4 x 2.1Approx. Onsite Dimension. (l x w x h): 1,600 x 1,400 x 2,100 mm, weight approx.: 700 kg
used
Sold without vice and accessories! Recording set, are not included in the price, but can be sold against bidding! The machines can be inspected by arrangement, be tried out and demonstrated! Shipping by Forwarding possible
used
Precision Deburring Faceting Milling Machine / Edge Milling Machine Specifications: Steel – stainless steel – aluminium – plastic – machining Deburring and faceting process is carried out with milling cutter Support angle - facet angle tiltable Facet angle adjustment 15 to 45 ° Facet width infinitely adjustable 0 to 7 mm Length of guide strip 500 mm Speed 2750 rpm Drive 400 V / 0.7 kW Space requirement approx. W 650 x D 600 x H 950 mm Weight approx. 30 kg
used
Condition depreciated, ready for use Horizontal manually swivelling spindle Travel X-axis :: 1,500 mm Y-axis travel : 500 mm Z-axis travel: 450 mm Digital Display :3 Axes Glass scales : 3 axes Tool holder: SK 50 Spindle speed: 28-1,400 rpm Input power: 9.2 kW Feed: infinitely variable Coolant basin and pump Tool holders Tools Weight approx.: 5.000kg Dimensions LxWxH approx.: 2,900 x 2400 x 2,400mm Space requirement LxW approx.: 4,400 x 2,400 mm
used
5 pcs. end mill MK , various , incl. SK50 mount For boring mill MK or milling machine SK50 , See also our post End Mills !
used
Description: KLOPP Milling MachineApprox. Onsite Dimension. (l x w x h): 1,200 x 1,800 x 1,500 mm, weight approx.: 1,100 kg
used
Universal tool milling machine make KNUTH type WF 5Machine -No: 108788 Year 1996Travel X: 400 mmTravel Y: 320 mmTravel distance Z: 440 mm18 spindle speeds: 63 - 3150 rpm.Spindle mount: ISA 40Projection: 165 - 485 mmTable size: 800 x 320 mmFeeds stepless: 10 - 1000 mm / min.Rapid traverse: 2000 mm / minDrive power: 3.0 kWDimensions approx: 1700 x 1660 x 1890 mmWith- 3-axis digital display- rigid angle table- Vice- many tool holdersused, in good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools
used
Description: Recording: ISO 40 Driving power: 4 KW Rotational speed: 30 - 1800 u/min X-axis: 600 mm Y-axis: 400 mm Z-axis: 450 mm feed rate: 6 - 270 mm/min Digital display Approx. Onsite Dimension. (l x w x h): 1,800 x 2,200 x 1,900 mm, weight approx.: 2,000 kg
used
X-axis: 500 mm Y-axis: 400 mm Z-axis: 400 mm Table dimensions: 700 x 425 mm Spindle Exception: SK 40 Spindle speeds: 1 - 4000 rpm. Spindle stroke: 60 mm Equipped with: - ISO tool holders - Coolant system -Operating instructions Country of origin: Germany Motor power: 5 kW Machine LxWxH: 200 x 200 x 200 cm Machine weight: 2000 kg
used
x-travel: / mmy-travel: / mmz-travel: ca. 500 mmtable-size: 1400 x 300 mmtool taper: SK40 turning speeds: 35 - 1800 U/minmilling head swivable ca.: 360 °total power requirement: 12 kWweight of the machine ca.: 2,8 tThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
used
Universal milling machine Lagun from a training workshop in top condition! Head universally rotate, swivel and tilt. Type: FTV2 YOC 2006 Tool holder SK40 Drilling pinole Coolant device Travel X-axis x00 mm Travel Y-axis x60 mm Travel Z-axis x40 mm Milling head type Vertical milling head Speed range 40 - 2000 mm/rev Table clamping surface approx. x00 x x00 mm T-slot size xx mm Feed X-axis xxx mm Feed Y-axis xxx mm Feed Z-axis xxx mm Weight approx. 1,850 kg Further data on request, rest according to photos Special price
used
Lagun FTV4-SP turret milling machine. Table: 1372x280mm. Longitudinal travel: 800mm. Cross travel: 345mm. Vertical travel: 400mm. Ram travel: 570mm. Variable speeds head. ISO40. Spindle travel: 127mm. Automatic tool holder. Slotting head. DRO Fagor for 3 axis. Weight: 1450Kgs.