milling machine used for sale

Double end profiler, edge processing machine, scoring motor, chipper motor, spindle motor, milling motor -Power: 1 kW 17030 rpm at 300 Hz -Voltage: 165 volts -Acquisition shaft: Ø 20 mm -Tool: mm -Dimensions: 280/60/H110 mm -Weight: 4.3 kg

Counter holder, counter bearing, bearing block, pillow block, bearing for milling machine -Swallowtail: each 150 by 181 mm 48 mm high -Drawing with the photos -Dimensions: 390/115/H310 mm -Weight: 34 kg

Counter holder, counter bearing, bearing block, pillow block, bearing for milling machine -Dovetail: 125 by 160 mm 25 mm high -Drawing with the photos -Dimensions: 300/110/H205 mm -Weight: 14 kg

Double end profiler, edge processing machine, scoring motor, chipper motor, spindle motor, milling motor -Power: 0.4 kW 11300 rpm at 200 Hz -Voltage: 133 volts -Acquisition shaft: Ø 20 mm -Tool: mm -Dimensions: 250/80/H170 mm -Weight: 4.7 kg

Double end profiler, edge processing machine, scoring motor, chipper motor, spindle motor, milling motor -Power: 0.15 kW 11160 rpm at 200 Hz -Voltage: 133 volts -Take shaft: Ø 15 mm -Tool: mm -Dimensions: 190/70/H85 mm -Weight: 1.8 kg

Double-end tenoner, edge processing machine, scoring motor, chipper motor, spindle motor, milling motor -Power: 0.4 kW at 11300 rpm at 200 Hz -Voltage: 133 volts -Receiving shaft: Ø 20 mm -Tool: mm -Dimensions: 250/60/H130 mm -Weight: 3.8 kg

Double end profiler, edge processing machine, scoring motor, chipper motor, spindle motor, milling motor -1x motor: 1.05 kW 18000 rpm at 300 Hz -Voltage: 165 volts -Take shaft: Ø 16 mm -Tool: Ø 70 x 25 mm -Dimensions: 285/60/H140 mm -Weight: 3.6 kg

Year of construction 2001 Siemens 810D Operating hours 1988 Travel distances 350 x 240 x 340 Spindle speed 20 - 6300 Drive power 6.3/10 KW Total connection power 15 kW Tool holder SK40 Accessories: el. Handwheel Spühlpistole Universal swivel rotary table 400 x 280 mm, Rotation range 360 °, swivel range +105/-15 ° with electronic angle display Coolant device

DECKEL FP4 NC Fraesmaschine Dialog 4 Dialog 4 control, working range 560 x 500 x 450 mm, pinole stroke 80 mm, 18 spindle speeds 31.5 -6300 min, folding head, tool holder SK 40, feed speed 1-4000 mm/min, rapid traw 6000 mm/min, table load 800 kg, weight 2070 kg, total connection value 16 kVA.

Notching milling machine -automatic hydropneumatic milling feed -Maximum cutter diameter: 250 mm

Milling machine, universal milling machine, tool milling machine, two-spindle milling machine, milling machine -Milling machine: Two-spindle milling machine for small parts -Dimensions: see photos -Drive: 0.37 kW each -Coolant device -Dimensions: 1000/850/H1360 mm -Weight: 352 kg

Counter holder, counter bearing, bearing block, pillow block bearing, bearing for milling machine -Abutment: for milling machines -Dovetail: 220 to 165 mm -Bore: Ø 85 mm -Dimensions: tech. Drawing with the photos -Dimensions: 400/145/H290 mm -Weight: 13.5 kg

Double-end tenoner, edge processing machine, scoring motor, cutting motor, electric motor, spindle motor, milling motor -Manufacturer: Haffner, milling motor type M 30 -Power: 300 W 17000 rpm -Voltage: 200 V 300 Hz -Dimensions: 240/70/90 mm -Weight: 2.5 kg

Machine Details Warehouse number 1105-03525 Machine type tool milling machine - Universal SIA brand Type 470 Year of construction 2001 Control type CNC Control ANILAM 53000MK Storage location FRANCE Country of origin italy Delivery time immediately Freight base from location Technical details x-travel 750 mm y-travel 450 mm z-travel 500 mm Control ANILAM 53000MK Speed range - spindle 4500 rpm Drive power - Milling spindle 7.5 kW Feed - Fine adjustment 5 ~ 1000 mm/min Rapid traverse X-axis 15 m/min Rapid traverse Z-axis 15 m/min Rapid traverse Y-axis 20 m/min Total power requirement 20 kW Machine weight approx. 3 t Space requirement approx. 3.2 x 2.1 x 2.5 m Accessories Coolant device Information Tool milling machine - Universal WITH ANILAM 5300 MK CNC WITH NEIHGBARER HEAD TABLE 1050 X 500 MM

clamping table, clamping angle, T-slot table, rotary table, milling machine table -Clamping table: Milling machine table swiveling -Axles: adjustable with hand crank, see photos -Dimensions total: 530/350/H450 mm -Weight: 56 kg

Counterholder, counter bearing, bearing block, pillow block, bearing for milling machine -Counter bearing: for milling machine -Bore: Ø 32 mm -Guide carriage: 90 mm movable -Dimensions: 400/235/H200 mm -Weight: 33 kg

Counterholder, counter bearing, bearing block, pillow block, bearing for milling machine -Counter bearing: for milling machine -Bore: Ø 30 mm / height 64 mm -Dovetail: 174 to 145 mm 22 mm high -Dimensions: see technical drawing in the photos -Dimensions: 235/67/H115 mm -Weight: 4.7 kg

Counterholder, counter bearing, bearing block, pillow block, bearing for milling machine -Counter bearing: for milling machine -Bore: Ø 48 mm / Height 70 mm -Dovetail: 90 to 74 mm 15 mm high -Dimensions: see technical drawing in the photos -Dimensions: 133/60/H135 mm -Weight: 4.2 kg

spindle moulder, spindle moulder -Manufacturer: Metabo, swivel table milling machine type Tf 1690 D with support table -Drive: 2.0 kW -Milling spindle: Ø 30 mm -Speeds: 3,000 / 6,250 / 9,000 rpm -Cutter: Ø max. 200 mm -Table length: 3600 x 500 mm -Dimensions: 3600/910/H1610 mm -Total weight: 170 kg

spindle moulder, spindle moulder, wood milling machine -Manufacturer: Martin, table milling machine type T 21 with table extension -Milling spindle: Ø 30 mm -Speeds: 3,000/4,500/6,000/9,000 rpm -Dimensions total: 1620/1060/H1120 mm -Total weight: 698 kg

aschinella details Warehouse number 1105-03375 Machine type Milling machine - Universal CmE brand Type FC 1100 Year of construction 1991 Control type NC Storage location FRANCE Country of origin spain Delivery time immediately Freight base from stock Technical details x-travel 1100 mm y-travel 700 mm z-travel 500 mm Receiving cone of the main spindle 40 SK Motor power 10.6 kW Table clamping surface 1400 x 450 mm Speed 40 - 1800 rpm Dimensions L-W-H 2.4 x 2.15 x 2.1 mm Machine weight approx., 3800 kg Information Equipment: - Heidenhain - Control model TNC 124 - Universal milling head "Huron" design - 2 counter holders for horizontal milling - autom. Tool clamping - Lighting - Central lubrication

Counterholder, counter bearing, bearing block, pillow block, bearing for milling machine -Counter bearing: for milling machine -Dovetail: 190 to 165 mm -Bore: Ø 56 mm -Number: 2x counter bearings available -Price: per piece -Dimensions: 265/77/H122 mm -Weight: 6.1 kg/piece

Counterholder, counter bearing, bearing block, pillow block, bearing for milling machine -Counter bearing: for milling machine -Bore: Ø 48 mm / height 150 mm -Dovetail: 140 to 115 mm 22 mm high -Dimensions: see technical drawing in the photos -Dimensions: 215/80/H210 mm -Weight: 6.8 kg

Counterholder, counter bearing, bearing block, pillow block, bearing for milling machine -Counter bearing: for milling machine -Bore: Ø 40 mm / height 108 mm -Dovetail: 79 to 59 mm 15 mm high -Dimensions: see technical drawing in the photos -Dimensions: 140/73/H155 mm -Weight: 3.6 kg

I sell a combined pin cutting machine with drill head BALESTRINI I2F 1 swivel table with pneumatic material pressure. Automatic cutting saw from below. Milling head for pin or finger joint production. Drill head for dubel drilling production 3 spindle. Feed automatically. End sensors positioning. Available the same.

TECHNICAL DATA SHEET CNC – Gantry gantry milling machine TRIMILL brand Type VF3016 Year of construction 2017 Control HEIDENHAIN iTNC530 HSCI Travel X-axis (longitudinal): 3,000 mm Y-axis (transverse): 1,600 mm Z-axis (vertical): 1,200 mm B-axis (swivel axis milling head) +/- 100 ° C-axis (rotation axis milling head) +/- 240 ° Structure / Axis concept AC servomotors with digital control for all axes Gantry drive of the X-axis Rack and pinion drive in the X-axis, backlash-free due to electrically prestressed, water-cooled motors 2 ball screws each in the Y and Z axes Guides of all linear axes are designed as prestressed roller guides Hydro-pneumatic weight compensation of the Z-axis via 2 cylinders Stationary frame components made of mineral casting, movable main components made of grey or nodular cast iron Double beams in load- and thermosymmetric d ...

Water slot milling machine, water slot milling machine -Three-spindle -electropneumatic circuit -pneumatic workpiece clamping -Fine adjustment via spindles and handwheels

Universal milling machine Lagun from a training workshop in top condition! Head universally rotate, swivel and tilt. Type: FTV2 YOC 2006 Tool holder SK40 Drilling pinole Coolant device Travel X-axis x00 mm Travel Y-axis x60 mm Travel Z-axis x40 mm Milling head type Vertical milling head Speed range 40 - 2000 mm/rev Table clamping surface approx. x00 x x00 mm T-slot size xx mm Feed X-axis xxx mm Feed Y-axis xxx mm Feed Z-axis xxx mm Weight approx. 1,850 kg Further data on request, rest according to photos Special price

Double-end tenoner, edge processing machine, scoring motor, cutting motor, electric motor, spindle motor, milling motor -Motor: 1.5 kW 2840 rpm at 50 Hz -Shaft mounting: Ø 15 mm -Weight: 12 kg

Radius/flush milling machine, edge milling machine, edge router, shaped parts milling machine For simultaneous upper and lower radius/flush milling of protruding edge materials on straight edges as well as curved workpieces with inside and outside radii. -Built-in milling cutters: 30° -Dimensions: 1000/600/H1450 mm -Weight: 60 kg

Double-end tenoner, edge processing machine, flush trim router bit, edge router bit, spindle motor, milling motor -2x motor: 0.4 kW 20 shaft 11300 rpm at 200 Hz -Motor: mounted on guides -Motors: swiveling -Cutter: with indexable inserts -3x consoles: each with 2 motors Price: per piece -Weight: 60 kg/piece

Double-end tenoner, edge processing machine, scoring motor, chipper motor, milling motor, spindle motor -Power: 0.4 kW at 12000 rpm at 200 Hz -Power: 0.60 kW at 16500 rpm at 300 Hz -with indexable insert milling cutter -Number: 3x motors available Price: per piece -Weight: 6 kg/piece

Double-end tenoner, edge processing machine, scoring motor, chipper motor, spindle motor, milling motor -1x motor: 1.5 kW 2740 rpm at 50 Hz -Shaft mounting: Ø 20 mm/M16 mm -Motor: mounted on guides -Travel distance: 160 mm -Weight: 30 kg

Double end tenoner, edge processing machine, scoring motor, chipper motor, electric motor, spindle motor, milling motor -Motor: 4.4 kW 2890 rpm at 50 Hz -Motor: 6.6 kW 5890 rpm at 100 Hz -Shaft mount: Ø 35 mm -Dimensions: 550/180/H200 mm -Weight: 40 kg

Double end tenoner, edge processing machine, scoring motor, chipper motor, electric motor -Motor: 3 kW 2860 rpm at 50 Hz -Motor: 4.4 kW 5800 rpm at 100 Hz -Shaft mount: Ø 40 mm -Shaft length: 150 mm -Dimensions: 600/240/H150mm -Weight: 40kg

Double-end tenoner, edge processing machine, scoring motor, cutting motor, electric motor, spindle motor, milling motor -1x motor: 0.3 kW 12000 rpm at 200 Hz -Indexable insert milling cutter -Motor: mounted on guides -Number: 3x motors available Price: per piece -Weight: 5 kg/piece

Double-end tenoner, edge processing machine, scoring motor, cutting motor, electric motor, spindle motor, milling motor -Motor: 2.2 kW 2820 rpm at 50 Hz -Motor: 4.2 kW 5810 rpm at 100 Hz -Shaft mounting: Ø 30 mm -Overall dimensions: 340/130/H220 mm -Weight: 18 kg

Double-end tenoner, edge processing machine, scoring motor, cutting motor, electric motor, spindle motor, milling motor -Motor: 4 kW 8760 rpm at 300 Hz -Shaft mounting: Ø 30mm -Dimensions: 390/160/H180 mm -Weight: 25 kg

Double-end tenoner, edge processing machine, scoring motor, cutting motor, electric motor, spindle motor, milling motor -Motor: 3 kW 2880 rpm at 50 Hz -Motor: 4.4 kW 5820 rpm at 100 Hz -Shaft mounting: Ø 35 mm -Weight: 30 kg

Double-end tenoner, edge processing machine, scoring motor, cutting motor, electric motor, spindle motor, milling motor -Motor: 2.2 kW 2820 rpm at 50 Hz -Motor: 4.2 kW 5810 rpm at 100 Hz -Shaft mounting: Ø 30 mm -Dimensions: 340/130/H220 mm -Weight: 20 kg

Double-end tenoner, edge processing machine, scoring motor, cutting motor, electric motor, spindle motor, milling motor -Power: 1.5 kW at 18000 rpm at 300 Hz -Shaft mounting: Ø 20 mm -Number: 1x motor available -Weight: 10 kg

Double-end tenoner, edge processing machine, scoring motor, chipper motor, spindle motor, milling motor, electric motor -Power: 1.5 kW 12000 rpm at 200 Hz -Holding shaft: Ø 16 mm -Dimensions: 380/75/H160 mm -Weight: 8kg

Double-end tenoner, edge processing machine, scoring motor, cutting motor, electric motor, spindle motor, milling motor -1x motor: 0.3 kW 18000 rpm at 300 Hz -Hole: Ø 20 mm -Number: 2x motors available -Price: per piece -Weight: 3 kg/piece

Double-end tenoner, edge processing machine, scoring motor, cutting motor, electric motor, spindle motor, milling motor -1x motor: 0.3 kW 17300 rpm at 300 Hz -Indexable insert milling cutter -Hole diameter: 20 mm with keyway -Number: 3x motors available -Price: per piece -Weight: 4 kg/piece

Double-end tenoner, edge processing machine, scoring motor, cutting motor, electric motor, spindle motor, milling motor -Motor: 0.3 kW 12000 rpm at 200 Hz -Hole: Ø 20 mm -Number: 3x motors available -Price: per piece -Weight: 3 kg

Double-end tenoner, edge processing machine, scoring motor, cutting motor, electric motor, spindle motor, milling motor -1x motor: 0.7 kW 11400 rpm at 200 Hz -Voltage: 220 V -Hole: Ø 20 mm -Weight: 5 kg

Double-end tenoner, edge processing machine, scoring motor, cutting motor, electric motor, spindle motor, milling motor -1x motor: 0.3 kW 18000 rpm at 300 Hz -Voltage: 165 V -Hole diameter: 16 mm -Number: 12 motors available Price: per piece -Weight: 3 kg/piece

Double-end tenoner, edge processing machine, scoring motor, cutting motor, electric motor, spindle motor, milling motor -Motor: 0.40 kW 12000 rpm at 200 Hz -Motor: 0.55 kW 18000 rpm at 300 Hz -Receptacle: Collet -Weight: 4 kg

Double-end tenoner, edge processing machine, scoring motor, cutting motor, electric motor, spindle motor, milling motor -1x motor: 0.3 kW 17300 rpm at 300 Hz -Voltage: 165 V -Hole diameter: 20 mm -Weight: 4 kg

Double-end tenoner, edge processing machine, scoring motor, cutting motor, electric motor, spindle motor, milling motor -1x motor: 0.3 kW 18000 rpm at 300 Hz -Voltage: 200 V -Hole diameter: 16 mm -Weight: 5 kg