4007 offers

maximum number of results exceeded > 1000
please refine your search

Category: 102: lathes
New in: 2000
Price: 29.000 €
Location: Land-fr FR 67500 HAGUENAU, 20 RUE AMPERE
Seller: SOCIETE FIMOTEC

Machine type CNC turning and milling center brand MAZAK INTEGREX type 100 Y built in 2000 control type CNC storage location France country of origin Japan delivery immediately cargo base free loading truck technical details Turning diameter 550 mm turning length 900 mm control 640 MT Pro speed angetr. Tools of 35 - 5000 U/min/rpm additional information INTEGREX 100 y -Outils Changeur 40 -Centre Arrosage broche 15 bars - lamp 4 couleurs C of check sur broche axe principal -Broche 10000 trs/min (KM 63) - Recuperateur de pièces

Category: 103: milling machines
New in: 2005
Price: request quote
Location: Land-CH Switzerland, 9527 Niederhelfenschwil
Seller: ProdEq Trading GmbH

max workpiece diameter: mm threading length: mm max module: --------------------------------------------------: WORKING RANGE - GEARINGS: - workpiece diameter max.: 30 mm - worpiece length max.: 180 mm - gear module max.: 1.5 mm MILLING SPINDLE / HEAD: - spindle revolutions (max): 3420 /min AXIS DRIVES: - rapid traverse: 6000 mm/min ELECTRICAL SPECIFICATIONS: - mains voltage: 400 V - mains frequency: 50 Hz DIMENSIONS / WEIGHTS: - space requirements -left/right-: 3000 mm - total height: 1900 mm - total weight approx.: 3200 kg

Category: 102: lathes
New in: 2000
Price: 34.000 €
Location: Land-fr FR 67500 HAGUENAU, 20 RUE AMPERE
Seller: SOCIETE FIMOTEC

Type of machine CNC turning and milling center brand MAZAK type INTEGREX 400 Y year 2000 control type conventional storage France country of origin Japan delivery December 2011 cargo base factory, site technical details Control Mazatrol fusion 640MT turning diameter 610 mm turning diameter over slide 390 mm turning length 1137 mm tools Magazine: 40 Rod diameter of around 72 mm main spindle speeds: 35-3000 main spindle drive power 30 KW main spindle maximum torque 400 nm Main spindle nose A2 - 8 "main spindle bore 81 mm C - axis 0-360 / 0.001 ° spindle indexing 5 ° driven tools power 15 KW powered tools torque 1500 nm driven tools speed 1/min. 15-5000 Travel (X, Y, Z) 580, +/-11 ...

Category: 103: milling machines
New in: 2002
Price: request quote
Location: ab Werksstandort,unter Strom
Seller: Kemmerich Werkzeugmaschinen GmbH

x-travel: 6500 mm y-travel: 1600 mm z-travel: 1200 mm table speed - backwards: 0 m/min spindle taper ISO: 50 turning speeds: 4000 U/min Feed: 5000 mm/min Rapid movement: 15000 mm/min control: Siemens Sinumerik 840 D Tool changer: 100 Cooling through the spindle: 20 bar coolant: table surface area: 8000 x 1100 mm spindle motor: 28 kW total power requirement: - kW weight of the machine ca.: - t dimensions of the machine ca.: m equipped with: - CNC control Siemens 840 D - Orthogonal milling head DAndrea type H 41 - 100-fold tool changer (ISO 50) - Handwheel - IKZ with paper tape filter - NC turning clamp with through hole - Four-jaw chuck - Hydraulic tailstock - 2 self-centering steady rests  ...

Category: 103: milling machines
New in: used
Price: request quote
Location: Land-in IN 40070 New Mumbai, W-381, MIDC Rabale, TTC Industrial Area W-381, MIDC Rabale, TTC Industrial Area
Seller: Syndicate Machines Pvt. Ltd.

Oerlikon Machine Name Vertical Milling Machine Manufacturer Oerlikon Model NO.5 Location MUMBAI Year Of Manufacturing NA Technical Specification Table Size 2000mm X 500mm Travel Size: X = 1500MM Y = 500MM Z = 500MM

Category: 102: lathes
New in: 2008
Price: request quote
Location: Land-de Germany, 40233 Düsseldorf
Seller: Knops Werkzeugmaschinen

faceplate diameter: 6000 mm swing diameter: 7000 mm turning height: 3500 mm Control: Siemens 840 D cross rail adjustment - vertical: 2000 mm crossrail -rapid travel: 2000 mm/min ram head - vertical travel: 2000 mm ram stroke speed: 0,1 - 16000 mm/min ram head dimension: 420 x 340 mm workpiece weight: 120 t faceplate turning speed range -stepless-: 0 - 40 U/min tool taper: ISO 50 milling spindle turning speed range:: 5 - 3150 U/min transmission ratio: 2 milling spindle drive: 52 kW max. torque on the spindle: 2400 Nm main drive: 214 kW total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: 11,2 x 6,7 x 18,5 m CNC-control Siemens Sinumerik 840 D Boring- and m ...

Category: 103: milling machines
New in: used
Price: request quote
Location: Land-in IN 40070 New Mumbai, W-381, MIDC Rabale, TTC Industrial Area W-381, MIDC Rabale, TTC Industrial Area
Seller: Syndicate Machines Pvt. Ltd.

ZAYER Machine Name : Universal Milling Machine Manufacturer : ZAYER Model : 2000 BF Location : Transit Year Of Manufacturing : NA Technical Specification: Table Size : 3500x2400x2800 MM Travel Size X : 2000 MM Y : 1000 MM Z : 1000 MM

Category: 103: milling machines
New in: used
Price: request quote
Location: Ahaus
Seller: A+B Werkzeug Maschinen Handels GmbH

x-travel: 400 mm y-travel: 200 mm z-travel: 400 mm tool adaptor: 40 SK turning speeds: 40 - 2000 U/min table surface area: 700 x 300 mm total power requirement: 2,5 kW weight of the machine ca.: 1,4 t

Category: 103: milling machines
New in: used
Price: request quote
Location: Land-in IN 40070 New Mumbai, W-381, MIDC Rabale, TTC Industrial Area W-381, MIDC Rabale, TTC Industrial Area
Seller: Syndicate Machines Pvt. Ltd.

Roku Roku Machine Name : Universal Milling Machine Manufacturer : Roku Roku Model : No.3 Location : Mumbai Year Of Manufacturing : NA Technical Specification: Table Size : 1700 X 500mm Travel Size X : 1300mm Y : 700mm Z : 500mm

Category: 102: lathes
New in: 2006
Price: request quote
Location: Standort
Seller: Aleman Machines e.K.

turning diameter: 600 mm turning length: 510 mm control: Fanuc total power requirement: 58 Kva. weight of the machine ca.: 4,9 t dimensions of the machine ca.: 2.060x3.185x1775 mm

Category: 103: milling machines
New in: used
Price: request quote
Location: Land-in IN 40070 New Mumbai, W-381, MIDC Rabale, TTC Industrial Area W-381, MIDC Rabale, TTC Industrial Area
Seller: Syndicate Machines Pvt. Ltd.

Huron Machine Name : Universal Milling Machine Manufacturer : Huron Model : 2.no Milling Location : Mumbai Year Of Manufacturing : NA Technical Specification: Table Size : 1600 X 430mm Travel Size X : 1400mm Y : 700mm Z : 500mm

Category: 103: milling machines
New in: 1993
Price: used machinery auction RESALE 5.500 €
Location: Land-li LI Liechtenstein, 9493 Mauren
Seller: Surplex GmbH

Weight approx.: 20000 kg Dimensions (l x w x h) approx.: 9000 x 5000 x 5000 mm Description: table dimensions 3000 x 800 mm, number of T-slots 5, max. table load 5000 kg, travel X-axis 3000 mm, Y-axis 900 mm, Z-axis 1000 mm, feeds stepless 1 - 5000 mm/min., milling head is adjustable in 2,5°, max. feed force in all three axes 25000 N, tool changer with 24 tool places, footprint of the machine 36 m², spindle cone holder ISO 50, swivelling around the sliding axis automatic indexing in 144 positions of 2.5° (-180 to +180°), distance spindle nose from table from table 130 to 1030 mm, spindle speed stepless 11 to 2500 rpm, 22 kW (main motor), max. torque at the spindle 1200 Nm, spindle diamete ...

Category: 103: milling machines
New in: used
Price: request quote
Location: Land-in IN 40070 New Mumbai, W-381, MIDC Rabale, TTC Industrial Area W-381, MIDC Rabale, TTC Industrial Area
Seller: Syndicate Machines Pvt. Ltd.

Hermle Machine Name : Universal Milling Machine Manufacturer : Hermle Model : UWF-801 Location : Mumbai Year Of Manufacturing : NA Technical Specification: Table Size 800 X 395mm Travel Size X axis 510mm Y axis 450mm Z axis 410mm Spindle taper ISO 40 Max. spindle speed: 2800 rpm

Category: 205: boring mills, machining centers
New in: 2001
Price: used machinery auction RESALE 4.500 €
Location: Land-de DE Germany, 91217 Hersbruck
Seller: Surplex GmbH

Weight approx.: 11000 kg control: PC83 Dimensions (l x w x h) approx.: 20000 x 2500 x 2700 mm c-axis: ja / yes software: WoodWOP working length x-axis: max. 5800 mm working width y-axis: max. 1480 mm main spindle: 12 kW tool changer: 12-fach / 12-fold vacuum pump: 100 cbm/h drilling head vertical x-axis: 6 piece drilling head vertical y-axis: 7 piece drilling head horizontal x-axis: 2 piece drilling head horizontal y-axis: 2 piece edge gluing unit: ja / yes travelling way Z-axis: 535 mm path-feed rate max. X-axis: 80 m/min path-feed rate max. Y-axis: 80 m/min path-feed rate max. Z-axis: 30 m/min Description: Well maintained and best equipped HOMAG Optimat BAZ 32/50/G CNC Machining Centre wit ...

Category: 103: milling machines
New in: used
Price: request quote
Location: Land-in IN 40070 New Mumbai, W-381, MIDC Rabale, TTC Industrial Area W-381, MIDC Rabale, TTC Industrial Area
Seller: Syndicate Machines Pvt. Ltd.

Alcera Machine Name : Universal Milling Machine Manufacturer : Alcera Model : 7S Location : Mumbai Year Of Manufacturing : NA Technical Specification: Table Size 1200 x 270 mm X travel 800 mm Y Travel 500 mm Z Travel 300 mm

Category: 101: boring mills and machining centers
New in: used
Price: 2.950 €
Location: Land-de DE 26215 Wiefelstede, Germany
Seller: Theodor Eberlei GmbH & Co.KG

Category: 202: milling machines
New in: 2002
Price: request quote
Location: Land-de DE Nordrhein-Westfalen
Seller: S-MA GmbH

Biscuit joiner (Hoffmann SCHWALBE) SMA-REF-6371 Category: Other Manufacturer: Hoffmann Type: PP2-FR Year of construction: 2002 Spindle: 2 x 3 milling spindles 2 x 2 drilling units Speed: 33,000 rpm Workspace: Clearance height: 100 mm Milling depth: 100 mm Special features: f. wing / frame m. 3 swallows - and 2 Duebelverbind. per corner simultaneous machining of both frame corners Engines 4 x 1,000 watts and 2 x 1,100 Watts Condition: ready for use as good as new under current Location: North Rhine-Westphalia Availability: immediately

Category: 209: other wood working machines
New in: 1994
Price: request quote
Location: Land-de DE 26215 Wiefelstede, Germany
Seller: Theodor Eberlei GmbH & Co.KG

Window processing line, CNC window production line, window angle system -Double end tenoner, make Gubisch, type DST H -BJ. 1994, Ser. 7593 -2x 2 tool towers a 5 heads -built tools from Leitz -Wellenaufnahme Ø 50 -max tool Ø 350 mm -max tool height 650 mm -4x milling motors 11 kW 2800 rpm -Control, Fabr. Gubisch -Roller conveyor, L / W 4,000 x 200 mm -Milling machine, make Gubisch, type FN2000 -BJ. 1994, Ser. 7490 -4 milling shafts -4x milling motors 9.2 kW 2800 rpm -Tools from Leitz -Wellen recording ca Ø 40 -max tool Ø 230 mm -max tool height 350 mm -m. Feed roller conveyor, L / B 4,500 x 150 mm -Roller conveyor, L / W 4,000 x 200 mm -Tool cabinet -Schalt- / fuse box

Category: 308: other machines for plastic
New in: used
Price: request quote
Location: Land-de DE Bayern
Seller: S-MA GmbH

compl. Line for plastic FensterSMA-REF-6396Kategorie: plastic window construction complete ProduktionslinienHersteller: UrbanBaujahr: 2001Leistung: up to 30 Windows per 8 h Schichtmit 3 MannMaschinen: 1) double miter saw Haffner DGS 187 K (1995) 2) cold saws TRS 275 K () 2001) 3) water slot milling WS 95 K (2001) 4) copy milling cutter m Olivenbohreinheit ((2001)5) single head welding machine AKS 1105 (2001) 6) two head welding machine AKS 5305/2 FF (2001) 7) plastering machine urban SV 480 (1995) 8) snap cutter Graule AKF 6/250 (2001) 9) suction (2001) 10 ) Glass Strip saw (2001) 11) screw feeder (2001) 12) storage rack for profiles (2001) 13) profile car PWL 100 (2001) 14) reel stand (2001 ...

Category: 103: milling machines
New in: used
Price: request quote
Location: Land-de DE D - Nordrhein-Westfalen
Seller: Peter Jüttermann Werkzeugmaschinen

dolly support for milling machine Ernault-Somua Z1C, used

Category: 202: milling machines
New in: 2010
Price: request quote
Location: Land-de DE Nußstraße 20 (Schreinerhalle) 81929 München
Seller: Bezirk Oberbayern

â?¢ Machine must be themselves, or by specialist company mined and transported â?¢ Are opportunities to check on site itself â?¢ Disconnect the electrical connections in consultation with the BBW â?¢ Machine is used but in very good condition and fully functional â?¢ Cleaner are partly in good condition to the extent the milled â?¢ machine is as it is, no warranty or repair â?¢ Before making a bid the machine can be seen in consultation â?¢ May be only after full payment of the purchase price reduction and removal â?¢ Machine can be picked up only after the move into the new building. (P ...

Category: 203: planing machines
New in: 2014
Price: 45.000 EU€
Location: Land-pl PL
Seller: Kennedy Machines

Category: 205: boring mills, machining centers
New in: 2013
Price: request quote
Location: Land-at AT Österreich
Seller: S-MA GmbH

compact CNC machining center (3,000 x 920 mm) SMA-REF-6395 Category: machining centers Manufacturer: Fields Type: Format 4 C-Express 920 Construction year: 2013 Work area: X: 270-3,000 mm Y: 150-920 mm Z: 10-50 mm Equipment: 8 vert. Drilling spindles 4 horiz. Spindle in X 2 horiz. Spindles in Y Milling spindle (3.3 kW) Nutsaege Condition: ready to use under current Location: Austria Availability: immediately Terms of delivery: From site Terms of payment: 100% prior to removal/loading

Category: 101: boring mills and machining centers
New in: 2005
Price: request quote
Location: Kunde
Seller: Klaus Rosenboom GmbH

x-travel: 800 mm y-travel: 800 mm z-travel: 800 mm Control: Heidenhain Mill Plus IT table surface area: Ø 900 x 700 mm milling-head swivable +/-: +30/-120 ° tool adaptor: HSK 63 turning speeds: 18.000 U/min power capacity - milling spindle: 35 kW : 40 St. table load: 1,4 t Dimensions (HxWxD): 5,0 x 4,25 x 3,1 m total power requirement: 70 kva weight of the machine ca.: 9,0 t 5- axis universal machining centre with swiveling head and round table - round table Ø 900 x 700 mm - swiveling head (full axis) - 3D- probe Heidenhain TS 641 - Blum laser tool setter - chip conveyor - internal coolant with filter - air blast trought spindle - mode 4 (manual working with open door) - ext .elec. hand  ...

Category: 101: boring mills and machining centers
New in: 2000
Price: request quote
Location: Land-de DE Nordrhein-Westfalen
Seller: S-MA GmbH

CNC bed type milling machine (x 1,800 mm) SMA-REF-6391 Category: milling machines Manufacturer: CME Type: FS-2 Year of construction: 2000 Control: HEIDENHAIN TNC 426 Spindle: 22 kW ISO 50 maximum 4,000 U/Min. Workspace: X 1800 mm Y: 1.000 mm Z: 1000 mm Table: 2,100 x 850 mm Condition: ready to use under current Location: North Rhine-Westphalia Special features: 20 x tool changer Chip conveyor Availability: immediately Terms of delivery: From site plus extraction/loading Terms of payment: 100% prior to removal/loading

Category: 101: boring mills and machining centers
New in: 2001
Price: request quote
Location: Kunde
Seller: Klaus Rosenboom GmbH

x-travel: 1250 mm y-travel: 880 mm z-travel: 800 mm Control: Heidenhain Mill Plus IT table surface area: 1500 x 1050 mm tool adaptor: Sk 40 turning speeds: 18.000 U/min power capacity - milling spindle: kW : 30 St. table load: 2,5 t Dimensions (HxWxD): 7,0 x 3,0 x 3,0 m total power requirement: 70 kva weight of the machine ca.: 12,5 t -CNC -machining centre with ATC - HEIDENHAIN Mill Plus IT - internal coolant - 600 l coolant tank - chip conveyor - ext. hand wheel - manual head - tool measuring Heidenhain TT 130 - air blast trought spindle - mode 4 (manual working with open door) - ext .elec. hand wheel

Category: 103: milling machines
New in: used
Price: 58.950 €
Location: Land-de DE 03051 Cottbus, Eigenheimweg 6
Seller: M. Hille Import & Export technischer Anlagen

Fully equipped 5-axis CNC bar machining centre ELUMATEC SBZ 150 / 9.00 m in fully working, good condition (without defects) -Aluminium machining: drilling, milling, thread cutting, sawing and notching - machining in steel: drilling, milling, thread cutting - electronic 5-axes industrial PC control with 6-page editing (including from below with angle head)- automatic tool changer for 8 standard and 3 special tools - with cutting saw for aluminum - automatic tensioner - movement with automatic correction - 12 collet chucks -2-circle clamping system -automatic length measurement on the profile bar -Network connection -Office software with dongle "drilling system" -Chip tray  ...

Category: 103: milling machines
New in: 1962
Price: request quote
Location: Nürnberg
Seller: Johann Kleinlein Werkzeugmaschinen GmbH & Co.KG

x-travel: 300 mm y-travel: 150 mm z-travel: 300 mm table surface area: 600 x 210 mm table tiltable and swivelling +/-: 40 Grad milling head -swivable +/-: 40 ° tool taper: MK4 turning speed range: 60 - 1900 U/min feeds - longitudinal: 0- 475 mm/min electrics - voltage/frequency: 380/50 V/Hz total power requirement: 1,90 kW weight of the machine ca.: 0,70 t machine comes with tiltable table Device for horizontal milling (no arbor), several MK4 Toolholders, vice.

Category: 202: milling machines
New in: used
Price: 3.900 €
Location: Land-de DE 97941 Tauberbischofsheim, Ernst-Bauer-Str. 3+5
Seller: OCHMANN Holzbearbeitungsmaschinen

Pneumatic dovetail cutter / Nutfräsmaschine Hoffmann type PU 2 VH, milling group for a keyway per working cycle vertically or horizontally, foot switch, engine: 1.7 kW, year 2004, passage height: 250 mm, depth vertical / horizontal: 180 mm / 250 mm, incl. roller conveyor.

Category: 210: window production machines
New in: used
Price: request quote
Location: Oberkochen
Seller: Gebr. Engelfried oHG

Number of milling spindles: 1 St. fence: ja ja /nein workpiece: ja Crosscutting milling machine STEGHERR, type KSF-mini Special milling machine for the efficient production of crossbar joints. The cross-grain milling machine KSF-mini is the product of great experience of the company STEGHERR in the construction of this special milling machine for cross-rung joints. With the KSF-mini all can be found in practice Cross joint connections be produced quickly and accurately. Also already profiled sprouts can be on the KSF-mini edit. The precise milling is achieved because the Workpiece in a clamping is handled on three sides. The tool drive takes place via two three-phase motors, the tension of  ...

Category: 103: milling machines
New in: 2001
Price: request quote
Location: Land-de DE
Seller: Innovac GmbH

X-travel: 1080mm, y-travel: 710mm, z-travel: 710mm, rotational speed: 12,000/min, max. spindle power: 15kW, tool cone: SK 40, number of tool slots: 32, controls: GILDEMEISTER TNC 430, operational/ spindle hours: ca. 35,000/ 10,000h, length: 3500mm, width: 2500mm, height: 2650mm, weight: 9.5t, without coolant system, y-axis track needs overhauling.

Category: 210: window production machines
New in: used
Price: 14.000 €
Location: ab Standort
Seller: Gebr. Engelfried oHG

Tenoning spindle: 1 St. Number of milling agregates: 4 St. Spindle diameter: 60/50 mm Control: ja Machine is still in use Window system Gubisch EST-H 2000 Ablängsäge ---------------- Engine 3 KW Speed: 3,000 rpm Saw blade diameter: 400 mm Flange diameter: 80 mm Adjustment: horizontal: manual after mechanical display Adjustment range: 0 - 120 mm length stop ---------------------- Length 3,250 mm, by hand slot spindle ------------------- Engine 9.2 KW Spindle speed: 4,500 rpm Spindle diameter: 50 mm Spindle length: 300 mm Spindle stroke vertical: 3 x 100 mm for IV 68 - IV 92 Tool diameter: max. 400 / min 240 mm Adjustment: horizontal u. vertically in the U-hub Adjustment range: vertical 2 ...

Category: 202: milling machines
New in: 2008
Price: request quote
Location: Land-it IT 0 Cantu (Como) , Via Susa 7
Seller: VERGA ERCOLE di Roberto Verga & C. S.A.S

SPINDLE MOULDER GRIGGIO line AZZURRA mod. T 90 secondhand working table size mm.480 x 1000 Spindle moulder at 4 speeds rpm1400 3500 6000 8000 motor power KW 3 ( HP4) year of production 2008 CE

Category: 103: milling machines
New in: used
Price: used machinery auction RESALE 350 €
Location: Land-de DE Germany, 97947 Zimmern
Seller: Surplex GmbH

Weight approx.: 700 kg Dimensions (l x w x h) approx.: 1300 x 1000 x 1700 mm Description: Transmissions 1:1 - 1:100

Category: 202: milling machines
New in: 2006
Price: request quote
Location: Land-it IT 35040 Roveredo di Guà (VR), Via Maceratoi, 8
Seller: Artuso Trading & Tech s.r.l.

5-AXES CNC WORKING CENTER - CMS AVANT 1B/560-PX5 year of manufacturing 2006 CE standard No. 5 axes controlled axes strokes: X=5600mm Y=2350mm Z=720mm B=+/-120° C=+/-270° working area 5220x1520 mm PX5 5-axes unit - HSK63f collect - power 12 kw (16,3 hp) - liquid cooled - max rotation 24000 rpm - pneumatic brakes on B and C axes No. 3 tool changer disks on Y carriage with No. 16 positions each (No. 48 total positions) vertical and horizontal drilling unit with 7+2+2 pences working table with No. 8 Schmalz clamps/cups support - No. 8+2 frontal/lateral reference stops - No. 8 bars for pieces lifting motorized belt for chips extraction No. 12 suction cups 145x35x150h mm - No. 12 suct ...

Category: 103: milling machines
New in: 2001
Price: used machinery auction RESALE 8.000 €
Location: Land-ch CH Switzerland, 9016 St. Gallen
Seller: Surplex GmbH

Weight approx.: 2500 kg Dimensions (l x w x h) approx.: 2500 x 2200 x 2000 mm Description: KUNZMANN WF 4/3 Haidenhein Milling Machine Travel X = 400 mm, Y = 320 mm, Z = 400 mm, distance spindle head to table edge max. 160 mm, distance spindle centre to table edge max. 320 mm, Max. travel spindle length Workpiece weight 250 kg, clamping surface 650 x 350 mm, number of grooves 5 without machine vice

Category: 101: boring mills and machining centers
New in: used
Price: request quote
Location: Land-in IN 40070 New Mumbai, W-381, MIDC Rabale, TTC Industrial Area W-381, MIDC Rabale, TTC Industrial Area
Seller: Syndicate Machines Pvt. Ltd.

TOS Machine Name Horizontal Boring Machine Manufacturer TOS Model H 100A Location Transit Year Of Manufacturing NA Technical Specification SPINDLE DIAMETER: 100mm SPINDLE TAPER : ISO 45 SPINDLE TRAVEL : 900mm SPINDLE SPEED : 1120 RPM TABLE SIZE : 1250mm X 1250mm MAX TABLE CAPACITY : 6,600LB X Travel, Cross : 1250mm Y Travel, Vertical : 1200mm Z Travel, Longitudinal : 1800mm

Category: 103: milling machines
New in: 1991
Price: used machinery auction RESALE 2.200 €
Location: Land-de DE Germany, 47495 Rheinberg
Seller: Surplex GmbH

Weight approx.: 3300 kg Dimensions (l x w x h) approx.: 5000 x 5000 x 2300 mm Description: KLOPP-KORRADI UW 3 CNC-Universal milling machine - machine no.: 54101 - control system: SIEMENS SINUMERIK 820 M technical data: - spindle-speed 20-4000 UpM - feed x,y,z -axis 1-2000 mm/min, 4.Achse 1-2000 °/min - fast gear x,y,z -Achse 7000 mm/min, 4.Achse 1-2000 °/min electrical data: - connected load: 15 kW - operating hours approx.: 120 - with documentation [see PDF file] - attention: backup battery is empty, parameter data are missing

Category: 202: milling machines
New in: 1997
Price: request quote
Location: Land-pl PL 66415 KÅ‚odawa , Gorzowska 8
Seller: PPHU Lignum Przemysław Kretowicz

Spindle moulder with swinging spindle GOMAD DFDK - 5 Manufacturer GOMAD Model / machine type DFDK - 5 Year of production 1997 Category of machines. Spindle moulder with tilting spindle Location Gorzów Wlkp. Conditions of delivery own collection Cost of delivery Customer cover Start type to be agreed Description Comments The milling body houses two spindles in its interior. The spindles made of alloy steel are mounted in bearings in a special version enabling operation at high speeds. Each spindle is mounted in a cylindrical housing, which, together with the motor, is moved vertically. A cast-iron table with two rotating discs is attached to the upper part of the bod ...

Category: 103: milling machines
New in: used
Price: used machinery auction RESALE 1.300 €
Location: Land-de DE Germany, 97947 Zimmern
Seller: Surplex GmbH

Weight approx.: 1500 kg Dimensions (l x w x h) approx.: 1000 x 1500 x 2000 mm Description: Incl. machine vice and more attachments (rotary disk, etc.)

Category: 103: milling machines
New in: 1992
Price: request quote
Location: Land-de DE
Seller: Czech Industrie Service

Travel in x 850 mm Travel in y: 330 mm Travel in z 440 mm Table size: 1240 x 335 mm Tool holder: SK 40 Speed range: 56-2800 RPM Total power: 4 KW / 400 V Machine weight: 2000 kg Equipment / Accessories: 3 axis digital display with screen adjustable hand control panel Horizontal milling equipment 1 lg. Milling 5 tool holder SK 40 Coolant system pivotable milling head with drilling tailstock Documentation All technical data are created according to our best knowledge and existing documents; Expressly reserved by mistake. Anyone can test the machine before making a purchase in our factory under power.

Category: 202: milling machines
New in: 1985
Price: request quote
Location: Land-be BE
Seller: Vebim

Notching machine for doors, windows and furniture doors Machine has got 3 milling tools driven by 1 motor of 3 HP (3000 rpm) Max. timber section: 45 x 45 mm Max. length between 2 notches: 600 mm Automatic cycle, timber is transported by a carriage with stroke of 600 mm Motor hydr: 1 HP

Category: 103: milling machines
New in: used
Price: request quote
Location: Land-de DE 85659 Forstern, Gewerbering 9
Seller: R.S.E cnc Maschinenservice

Cover FP2, compl. disassembled and overhauled, condition like new paint new, mechanics kplt. tested and reconditioned, table planed, stripper, can bellows new (Y), Chuck SK40 S20, glass scale surcharge still installs, free loaded from site Sale only to professionals

Category: 209: other wood working machines
New in: 2003
Price: request quote
Location: Land-be BE
Seller: Vebim

automatic window production line consisting of the following elements: - Infeed table - CNC controlled milling machine BIMA 810F with tool changer 100 positions - transfer transport - Two profiling machines - Outfeed transport workpiece dimensions (single processing) workpiece length: 300mm min, max 5500 mm workpiece thickness: min 51 mm, max 220 mm workpiece width: min 37 mm, max 140 mm workpiece dimensions: (paired processing) workpiece length: 300mm min, max 5500 mm workpiece thickness: min 2 x 51 mm, max 2 x 110 mm workpiece width: min 37 mm, max 140 mm capacity: 400 to 600 pcs / shift depending on the size and complexity full description on request

Category: 204: grinding machines
New in: 1997
Price: 14.900 €
Location: Land-de DE 40764 Langenfeld
Seller: Tischlerei Bracht GbR

Profile milling and profile grinding machine Brandt - Arminius, specifically for stair construction Thank you, that you are interested in our offers. If you have specific questions, please use the telephone, personal interview questions can clarify faster than by mail. A video of the current machine can be sent on request. Ideal machine for stair builders and solid wood processor 5 units: 1 edge grinding unit with 120 mm band, pneumatic belt tension and electro-pneumatic controlled sanding shoe 2 milling units 1, 5kW to RADIUS milling, swiveling 2 units of profile grinding with belt and electro-pneumatic controlled sanding shoe Secure workpiece clamping chain plates and upper ...

Category: 209: other wood working machines
New in: 2006
Price: request quote
Location: Land-be BE
Seller: Vebim

Single sided edge bander with hot melt, fixed side at the right, pre-milling unit Edge thickness: 0,4 to 3 mm Workpiece thickness: max 50 mm Min workpiece length 150 mm Feedspeed 22 m/min Workpiece transport by chain, top pressures with rubber rollers Sound enclosure over all trimming motors Equipment: Pre-milling with 2 shapers, motors 1,5kW Glue pot for both EVA and PUR glue Pressure zone with segmented pressure shoe End trims K3, motors 0,2kW, 0° and 3° tilting Rough trimming, motors 0,7kW Top/bottom radius trimming, tilting, automatic positioning, motors 0,3kW Postform trimming unit AKF, 2-axis cnc controlled, motors 0,35kW Radius scraping unit ZK Glue scrapers ZK-F Buffing unit (Retur ...

Category: 103: milling machines
New in: 2004
Price: request quote
Location: Land-it IT 23801 Calolziocorte, via serta 23
Seller: Industrialbay

mod. E130 CNC YASNAC QUICK 50 MT AXIS TRAVEL X400 Y300 Z300 TOOL CHANGING POSITIONS 12 LIGHT CHUCK PALLET'S DA 150-450 WATER THROUGH THE CHUCK 2 PALLET'S 400x300 CHUCK 10000 ATTACK BT30 YEAR OF CONSTRUCTION 2004

Category: 209: other wood working machines
New in: 2006
Price: request quote
Location: Land-be BE
Seller: Vebim

Machine for cutting, milling, drilling and dowelling frames or rails, straight or mitre, with or without counter profiles in small batch size or one-off production Workpiece length 160 - 2350 mm. Workpiece width: - 20 - 140 mm for 2 workpieces per field - 20 - 100 mm for 2 workpieces per field at 45 ° - 20 - 300 mm for 1 workpiece per field Workpiece thickness 10 - 30 mm. Angle adjustable between 45 ° and 90 ° Tables can be tilted 25 ° PC controlled on 3 axes Drilling and inserting on point-to-point basis Equipment: Sawing station: saw blade 350 x 30 mm, motor 2.2 kW, 2800 R / min Drilling station: drill bit diameter 10 mm, motor 2 kW Milling station: diameter tool 100 - 200 mm, spindle  ...

Category: 102: lathes
New in: 1999
Price: request quote
Location: Land-de DE
Seller: RG-Tools GmbH

CNC multi-axis turning - milling center with Portal machine's group: CNC turning and milling center Manufacturer: OKUMA Type: LT 25 M 2pcs 300 year of build: 1999 Control: OSP 7000 L with IGF one touch Power-on hours: 80239 h Cutting time: 16516 h Country of origin: Japan Delivery time: Please enquire Cargo base: EXW Technical data Rotary diameter: 300 mm Turning length: 300 mm Control: OSP 7000 L with IGF one touch Distance between centers: 1524 mm Swing over bed: 500 mm Main spindle: Speed range - main spindle: 30-3800 U / min Drive power - main spindle: 22 kW Spindle bore: 65 mm part hollow voltage C-axis: 0.001 ° Counter spindle: RPM - spindle: 30-3.000 U/ ...

Category: 209: other wood working machines
New in: 2013
Price: request quote
Location: Land-be BE
Seller: Vebim

Edges up to 3 mm from coil, 6 mm strips Workpiece width min: When Workpiece thickness 12-22mm 70 mm When Workpiece thickness23-40 mm, 120 mm When Workpiece thicknesse 41-60mm 150 mm in relation to workpiece length Feed speed 11 m/min Equipment: Pre-Milling 2 X 2,2 KW Pre-heating of panel edge Glue aggregate A6 Coil edge magazine Pressure zone, central positioning End trims, chamfer 15°/straight, 2 X 0,18 KW, 12.000 rpm, electro-pneumatic setting central control Top & Bottom trimmng, 2 X 0,27 KW, automatic adjustment when switching from straight to angle Corner rounding unit 1 X 0,35 KW, 12000 rpm, max. 3 mm edge thickness, workpiece thisckness: max. 40 mm, feedspeed 11 m/min., min workpiece ...

You didn't find your wanted machine? send wanted inquiry to all dealers (no registration necessary)