134,294 used machines on RESALE, but how to find them? Machine Search
REITZ RW40300400 agitator for tank containers 4.0 KW / 300 rpm and inclined blade stirrer Worm gear motor IE3: Three-phase motor Moll 3 x 230/400 Volt, 4.0kW, IP55, n1 = 1440 rpm, n2 = 300 rpm, worm gear, i = 1:5, plug-in shaft as output shaft D = 28 mm. 5 m cable and motor protection plug. Shaft: Precision stainless steel shaft D30, length 2000 mm, diameter 30 mm, Material: stainless steel. With 2 x 1000 mm pitch and additional rigid coupling. Coupling: 2 pieces rigid coupling, 1x 28/30, 1x 30/30 mm, material stainless steel Agitator: 2 pieces of double-bladed oblique blade stirrers, diameter 400 mm, material stainless steel 1.4571, welded version. Truss: With 1 piece mounting frame approx. 400 mm x 2600 mm Each longitudinal strut 2600 mm consists of 2 mounting rails 41 x 82 mm profile. With diagonal struts and angles for fixation on tank frames. Frequenc ...
Stock #U2450-1 Used foaming mixer by Kinematica AG (CH) type MEGATRON FM 19-120/2 LR-P. Machine has working output in range from 40-200 l/h, depending on product. Maximal viscosity of product up to 10000 mPas. Foaming head is equipped with heating/cooling jacket and can work at pressure up to 23 bar and temperature up to 90C. Rotor works with adjustable rotation - in range from 375 up to 750 rpm. Main drive power consumption - 11 kW. Contact parts with product designed in stainless steel AISI 316L. Mixer is equipped with integrated lobe pump by Tri-Clover/Tri-Clamp, driven by el. motor with power 0.75 kW. Working pressure up to 23 bar. Maximal rotation of lobes - up to 370 rpm. Gase feeding system - dosing air/N2 - at pressure up to 25 bar, temperature up 20C, flow range - 0.5 to 15 ln/min. Machine is mounted on mobile stainless steel frame with local control panel. Last time used in fo ...
Stock# U2453 Used stainless steel contact parts ribbon mixer by Yanagiya (JP). Mixing chamber has internal dimensions: L 598 mm x W 500 mm x D 550 mm. Total volume of mixing chamber 145 l. Working volume approx 100 l. Side walls have welded atmospheric stainless steel jacket, which has bottom discharge outlet with valve. Mixer has mixing shaft with bolted stainless steel ribbon, belt driven by el motor 1.5 kW, 1420 rpm, 380 V, 50 Hz. Discharge of chamber by tilt, via manually operated wheel. Mixer is mounted on mobile carbon steel base and is equipped with local control panel. Shipping dimensions: L 145 cm x W 95 cm x H 160 cm x weight about 800 kg.
Grieser VPL 3,0 L laboratory vacuum planetary mixer suitable for mixing powdery solids, liquids and pastes as well as for the incorporation of fillers, jacketed for heating/cooling, total volume mixing container 3.0 liters, useful volume mixing container 0.3 to 2.1 liters, operating pressure mixing container -1/+1.3 bar, operating pressure jacket max. 3 bar, flow temperature 100ºC, mixing container can be raised and lowered, speed mixing tool 18-393 RPM, speed planet/scrapper 13-176 RPM, material of product contacting parts 1.4404, material dynamic seals PTFE, material static seals EPDM/Silikon, electrics 400V AC/50Hz, total power 3 kW, Siemens SIMATIC S7-1500, machine weight (without container) approx. 300 kg, includes Single Temperiertechnik type CH-6-6-W heating/cooling system (temperature of the circulating medium (water) 0-90ºC, max. operating pressure 17 bar, test pressure 21 bar ...
Machine Type: Core Sand Mixer Manufacturer: Baumberg Type: AMF60 Year of Make: 2010 Condition: used / in working order Offer will only be sent if a complete imprint is provided Price 1.750 Euro incl. 19% VAT Fixed Price Location Warstein , Germany Reference M-BAU-0425 DESCRIPTION We offer you a used core sand mixer from the manufacturer Baumberg. Weight 480kg Flow rate 1.44 m3/h Timer would have to be renewed. But it also works that way. Available now. Our offer is aimed at tradespeople who are registered within the meaning of the Trade Regulation Act according to §14 GewO. The offer is subject to change, subject to prior sale. Please provide your full contact details to receive a quote with our terms and conditions of payment. Errors in the descriptions and offers are reserved!
55,000 litre milk tank/ agitator tank made of V2A Cat No.: 25-0151EUBA Condition: Used Volume 55000 L Material V2A (AISI 304) 1.4301 Overall height 8400 mm Cylinder height 6000 mm Diameter 3400 mm Number of feet 3 Surface marbled on the outside Surface inside 2B=IIIC ground Agitator Erwin Stelzer Warburg Agitator Technology Topsoil: Clapper bottom Level measurement with sleeve 3/4" Side stick agitator mixer with 2 propeller stages Dome with manhole Ø DN 300 Tank cylinder: Manhole Subsoil: Clapper bottom Sensor for level measurement 3 half-shell feet with base plate Fixed Technical data stick mixer: Manufacturer: Erwin Stelzer Warburg Rührwerktechnik Engine type: DRK 7.127 6.0 kW 8.0 hp 390/660 volts 18.2/10.5 Amp. 0.68cosφ 450 r.p.m. 50 Per. Operating Mode: S1 Agitator shaft: 6,870 Propeller: 2 x 500
Year of manufacture 2019, top condition, only approx. 300 hours Machine housing: solid stainless 2 rotation directions Emptying by hydraulic tilting of the mixing trough Membrane keyboard with plain text display in German Automatic mixing time preselection Control cabinet built-in, main switch Microprocessor Control (PLC) Mixing speed speed: infinitely variable Mixing tank: 500 litres Motor power 7.5 KW / voltage 400V / 50Hz Incl. MA 20 automatic mixing: for up to 20 programs (forward/backward/pause/total time and mixing speed speed) Incl. Z-mixing arms instead of paddle shafts Incl. protective grille: welded construction made of stainless steel, hydraulically operated Incl. 2 operating instructions with machine With mast feeding system BA24 Hydr., stainless, for standard wagons
The vessel is purposed for the mixing of liquids, it is cylindrical shape with dish type top and bottom. All product contact parts are manufactured from stainless steel AISI 316L or AISI 316Ti. Internal surfaces have finish of 320 grit, polished, with Ra = 0,4 µm, welds are ground down smooth and buffed. External surfaces have finish of 120 grit, Ra = 1,6 µm, welds are ground down. The vessel is fitted with 3pcs stainless steel legs made from AISI 304 . Comes equipped with top mounted motor and three-bladed propeller agitator for even mix and for keeping products homogenous - agitator propeller mixing element type with shaft and drive. Mixer is in overall excellent condition – little use, serviced and well looked after. Technical characteristics: · Net capacity: 1000 litre · Total volume: 1200 litre · Working volume: 1000 litre · Working tempe ...
Originates from a European pharmaceutical leader in contract development and manufacturing (CDMO). Includes: 304 s/s platforms and stairs The MGW-1 used process mixer is designed for preparing alcohol, alcohol-based or water-based solutions, storing them, and maintaining the temperature of the medium at the level necessary for further processing. Working Description: Milfor is currently a part of Schwarte Processing – a brand of the HF FoodTech Group Web: abc.schwarte-processing.com The device is made to ATEX standard and can operate zone classified as explosion-hazard zone standard Z1 and Z2. The mixer is designed as a vertical cylindrical tank with a working capacity of 1000L and an internal diameter of 1100mm, ellipsoidal bottom. The tank is a welded, double-shell structure made of 316L stainless steel (components in co ...
Homogenizing Mixer CML125 Key data: • SYMEX CML125 • Working volume: 125 • Armature agitator with scrapers and breakers 19 ... 82 min-1 • Homogenizer with right/left run (homogenizing/pumping mode) 5 - 21 m/s • Circulating line • CIP • Lid Hydraulically liftable • Control via touch display • Heating, cooling, vacuum, ... • New seals • Pharmaceutical version, but can also be used in cosmetics Media supply: • Cooling water flow: approx. 1.5 m³/h at 3 bar • Cooling water for vacuum pump: approx. 0.3m³/h at min. 2 bar • Compressed air: approx. 2000 L/min at 8 bar • Electricity: 3x400V at 50Hz; 45.0 kVA / 45.0kW • Steam: 6-8 bar, 45kG/h The machine is factory overhauled and can be visited. We supervise your "Turn Key" project, including assembly at your premises and commissioning.
Used paddle mixer made by Steiner, model: MB 2000 with heating jacket. Usable capacity 2000 L. The Steiner MB 2000 with a usable capacity of 2000 litres is a professional device that can be useful for various applications in the food, chemical, cosmetic and pharmaceutical industries. It is equipped with a weighing system, a heating jacket and a paddle mixer with built-in Teflon scrapers, which enable accurate collection of the product from the bottom of the tank and prevent burning. The device can be helpful in a wide range of production processes, such as mixing, heating, defrosting or melting ingredients. By using cold water in the jacket instead of hot water or steam, it can also be used to cool products. Both the tank and the shaft with agitators are made of 304 acid-resistant steel. Teflon scrapers at the ends of the very sturdy agitators effectively collect the product f ...
Homogenizing Mixer CML50 Key data: • SYMEX CML50 • Working volume: 50 • Anchor agitator with scrapers and breaker 13 ... 111 min-1 • Homogenizer Co Twister • • Pump - Rotor Speed: 300.. 9360 min-1 • • Shear - Rotor Speed: - 9360 .. 9360 min-1 • Circulating line • CIP • Lid Hydraulically liftable • Control via touch display • Heating, cooling, vacuum, ... • New seals • Pharmaceutical version, but can also be used in cosmetics Media supply: • Cooling water flow: approx. 1 m³/h at 3 bar • Cooling water for vacuum pump: approx. 0.2m³/h at min. 2 bar • Compressed air: approx. 1000 L/min at 8 bar • Electricity: 3x400V at 50Hz; 45.0 kVA / 45.0kW • Steam: 6-8 bar, 45kG/h The machine is factory overhauled and can be visited. We supervise your "Turn Key" project, including assembly at your premises and commissioning.
SYMEX P 1000 Agitator Tank Technical data: • Max. filling volume: 1000 l usable volume • Min. filling volume: approx. 250 l (minimum usable volume) • Product: pharmaceutical liquids, aqueous solutions • Operating voltage: 400 V, 50 Hz, PEN • Agitator: 4 kW • Permissible operating overpressure interior: -1 ... +1 bar, • Permissible operating temperature indoors: 95 °C Agitator system • Design: slow-running armature agitator (simplified comb bucket agitator without scraper system) with one (1) • • piece of current breaker; • Possibility to permanently dismantle the agitator and the current jammer when it is not needed. • Stirring tool: armature stirrer, central installation in the container lid • Drive: Bevel gear • Drive power: approx. 4 kW • Speed: approx. 5 ... 20 min-1; Adjustable via frequency converter Current breakers • One (1) ...
FrymaKoruma (ProXES) Type DinexH 200 vacuum high shear emulsifier for the production of high-quality emulsions, suspensions, creams and lotions, total volume 200 litres, usable volume 160 litres, minimum volume 15 litres, usable operating pressure product chamber -1.0/0.0 bar, usable operating pressure double jacket -1.0/+6.0 bar, scraper agitator (single-arm, counter-rotating scraper agitator, direction reversal for cleaning, flow breaker with perforated mixing blade mounted in the lid, PTFE scraper plate, agitator drive 1.5 kW, agitator speed fixed), high-performance homogeniser (rotor/stator system, tool size 160 mm, power 22 kW), main vessel lid (domed design, camera installed on the lid, 1 DN 125 sight glass incl. wiper and light, 1 DN 32 vent valve incl. electro-pneumatic valve, 1 pressure transducer, lid closure by means of segment clamp screws), container lid can be lifted, tilte ...
Double Z Kneader / Sigma Kneader / Shovel Kneader / Trough Kneader Linden Suitable for highly viscous, tough, plastic or sticky materials such as adhesives, sealants or pastes. Thanks to their two interlocking Z-shaped kneading arms, they can process substances that are hardly homogenizable with normal mixers. - Make HermannLinden, built in 1965 - Machine type K II 60, factory no. 605 - Refurbished in 2025, electrical equipment completely new - Frequency-controlled electric motor 4.0 KW - Frequency converter Optidrive E3 IP66 Outdoor with main switch, potentiometer and reversal of the direction of rotation - Control box with main switch, emergency stop and undervoltage tripping - Speed from approx. 15 to 60 rpm. - Belt drive - 2 Z-waves - All parts in contact with the product in copper and stainless steel - Single-walled copper container approx. 600 x 600 x 450 mm = appr ...
Used spiral mixer DIOSNA, type: SP 160 D - In repainted the bakery State - 2 time watches - new dust cover - Bowl for 160 kg dough or flour-100 kg - spiral stainless - stainless steel boiler - - 2 speeds - 1 reverse - emergency off switch of the mixer is in good condition and is ready for use immediately. Inspection and testing according to arrangement.
Spiral mixer for 50 kg dough or other masses, ERKA, type: SR 35 -In good condition- - Reinforced spiral arm - 2 Time clocks - 2 speeds - Emergency stop - Stainless steel dust cover - Kneader runs with AUTOMATIC and also in manual mode - Boiler and spiral made of stainless steel and in very good condition (no signs of use) - New, long connection cable attached - Electronics in very good condition, everything has been checked Kettle: for 30 kg flour or 50 kg dough El. Connection: 50 Hz, 380 V, 3.0 kW, 6.9 A Engine speeds: 710 and 1,425 rpm. The machine is in very good condition and is ready for immediate use. Visits and test runs are possible.
Gross volume: 300 ltr. Net volume: 220 ltr. 1 x Head Material: mild steel.
Tonelli 600 stainless bowls stainless bowls for Tonelli 600 model mixer … 28 in stock
Volume: 5 ltr. Material: Stainless steel Drive: 2.7 KW Weight: 200 kg
Collomix Rota 30 Paint Mixer The Collomix Rota 30 is a powerful biaxial mixer that has been specially designed for the fast and efficient mixing of paints, varnishes and plasters in closed containers. It is characterized by a biaxial mixing process in which the vessel rotates simultaneously around two axes, which enables mixing times of less than 90 seconds even for heavy materials. Features and ergonomics Automatic clamping: The mixing vessel is automatically fixed and centered after insertion. Safety equipment: Integrated safety door lock and an emergency stop button; the door only opens after the mixing unit has stopped. Handling: Equipped with extendable castors and height-adjustable machine feet for easy positioning. Durability: An integrated "Splash Guard" mechanism protects the drive elements from contamination caused by leaking paint. Areas of application The de ...
Mixer for gentle mixing of temperature-sensitive masses with resins, waxes, etc., incl. control cabinet and AZO weighing scale (1,500 l., on 3 measuring cans), without mixing container. Product-contacted parts made of stainless steel.
Fluid mixer for tempered mixing with double sheath, 350 l. content (usable volume: 100 l. - 280 l.), outlet sideways, pressure-resistant up to 10 bar, product-contacted parts made of V2A 1.4541; without tools.
Homogenizing Mixer Manufacturer: Becomix Type RW 15 CD Mixing tanks for liquids Stainless steel construction, cool/heatable, pressure and vacuum resistant 24 liters total capacity 15 liters working volume bottom-mounted homogenizing head, top-mounted armature stirrer with scrapers with integrated control unit Tank design: Capacity 24 litres product space/core space PS: -1/2.0 bar product space/core space DS: 134 °C Product space/core space Capacity 1.7 litres Coat space/lid compartment PS: 4.0 bar jacket chamber/lid chamber TS: 152 °C Jacket space/lid chamber Operating data according to acceptance PB: -1/2.0 bar product space/core space PB: 3.0 bar jacket chamber/lid chamber
Type Grinders / Mincers Height 1580 Width 980 mm Length 1100 mm Voltage Electrical: 400V 50Hz 3N Installed Power 4 kw Main material Stainlees Steel Time of realisation 2-3 weeks Throat Diameter mm Grinder Type Feeding System Hooper
Homogenizing Mixer Manufacturer: Becomix Type RW 15 CD Mixing tanks for liquids Stainless steel construction, cool/heatable, pressure and vacuum resistant 24 liters total capacity 15 liters working volume bottom-mounted homogenizing head, top-mounted armature stirrer with scrapers with integrated control unit Tank design: Capacity 24 litres product space/core space PS: -1/2.0 bar product space/core space DS: 134 °C Product space/core space Capacity 1.7 litres Coat space/lid compartment PS: 4.0 bar jacket chamber/lid chamber TS: 152 °C Jacket space/lid chamber Operating data according to acceptance PB: -1/2.0 bar product space/core space PB: 3.0 bar jacket chamber/lid chamber
For sale is an EKATO UNIMIX LM5 laboratory mixer, built in 2001 The plant is functional and can be visited and tested on site by appointment. All the main functions are present, including stirring, homogenizing, vacuum operation, and heating and cooling. The vacuum pump is included in the scope of delivery. Condition: The machine is in used, working condition. Cooling is provided by city water. There is a slight leak in the cooling water circuit with low drip loss. According to the current state of knowledge, the function of the system will not be impaired by this. An on-site inspection and functional test is expressly desired. Documentation: Operating instructions available Circuit diagrams available Device folder available Sale exclusively to tradespeople. Subject to prior sale. Sale under application of margin taxation in accordance with sec. 25a of the German VAT ...
Planetary mixer with infused tool, 2 mixing stars, 4 mixing buckets and scraper / emptying bucket. Maximum filling per batch: 2,250 l. / 3,600 kg, solid concrete output per batch: 1,500 l., workable grain size: 0 - 65 mm, with double-sided swivel valve outlet (hydraulicact). Incl. main drive motor 75 kW and many spare parts.
Homogenizing Mixer Manufacturer: Becomix Type RW 30 CD Used Becomix process tank model RW30CD made of stainless steel. Approximate working volume 2-25 liters (depending on product). The unit features a clamped, domed lid and a tapered welded bottom. The interior is designed for a maximum allowable operating overpressure of 2 bar (29 psi) at 133°C (273°F) and a maximum allowable external pressure of 1 bar vacuum (15 psi FV) at 5/133°C (41/273°F). The metal's minimum design temperature is 5°C (41°F) at 2 bar (29 psi). The outer stainless steel jacket is designed for a maximum operating pressure of 4 bar (58 psi) at 5°C (41°F) to 152°C (306°F). The unit is equipped with a top-mounted mixer with electric drive/gearbox and a floor-side homogenizer with electric drive. Mounted in a wheeled stainless steel frame. Room I Room II max./min. pressure PS 1/-1 4 max./min. temperat ...
Homogenizing Mixer Manufacturer: Becomix Type RW 30 CD Used Becomix process tank model RW30CD made of stainless steel. Approximate working volume 2-25 liters (depending on product). The unit features a clamped, domed lid and a tapered welded bottom. The interior is designed for a maximum allowable operating overpressure of 2 bar (29 psi) at 133°C (273°F) and a maximum allowable external pressure of 1 bar vacuum (15 psi FV) at 5/133°C (41/273°F). The metal's minimum design temperature is 5°C (41°F) at 2 bar (29 psi). The outer stainless steel jacket is designed for a maximum operating pressure of 4 bar (58 psi) at 5°C (41°F) to 152°C (306°F). The unit is equipped with a top-mounted mixer with electric drive/gearbox and a floor-side homogenizer with electric drive. Mounted in a wheeled stainless steel frame. Room I Room II max./min. pressure PS 1/-1 4 max./min. temperat ...
Qty 1 x Guix 75 internal mixer, Chamber volume 75L, Tangential rotors, Hydraulic drop door with linear actuator and latch, Motorised lubrication and process oil system, With 250kw A.C. 1470rpm, 400V motor and controls. Rotor speed approx 60rpm. All mounted on a heavy duty steel base. Complete and in very good condition.
NEW! 400 L capacity all stainless steel with stirring system conical bottom with centrifugal pump with water meter power : 1,5 kW dimensions (l x w x h) : 1.200 x 700 x 1.500 mm
Type: UC 80 for Max: 80kg flour for maximum: 120kg dough
Rex Grinder + Mixer is a professional meat grinding and mixing machine designed for use in the meat and food processing industry. It combines grinding and mixing functions in a single unit, providing efficient preparation of various meat products for further processing. The hopper, worm housing, worm, and main machine structure are manufactured from stainless steel, ensuring excellent hygiene, durability, and easy maintenance. The main switch and control system are integrated into the machine housing for safe and convenient operation. The machine is equipped with an electrically interlocked safety guard and a quick-release system for the worm and cutting set, allowing easy cleaning and servicing. The cutting plate diameter of 114 mm ensures efficient processing performance for demanding production environments. Technical Specifications Manufacturer: Düker Rex Machine Type: Grinder ...
260-Liters Mixing Machine – MM Service The machine is manufactured entirely from high-grade stainless steel and is designed for quiet, reliable operation. The spiral mixing auger has a proven track record for mixing minced meat, with more than 250 companies successfully using our mixing machines. The mixing system is engineered to provide homogeneous and precise blending of minced meat with seasonings for the production of minced meat products such as kebapche, meatballs, burgers, as well as for mixing ingredients for salads and other food products. The unloading process is fast and convenient, while the machine's design allows for quick and easy cleaning. Only components from leading international manufacturers are used in the production of the machine. The integrated geared motor is imported from Germany and represents the highest quality class. For operator safe ...
Vibrator, Mixer, Ball Mill, RETSCH MM 301 Features of the Retsch MM301 shredder: Reproducible dry grinding Loss-free wet grinding thanks to screw-tight grinding pots Cryogenic grinding with minimal liquid nitrogen consumption Fast and efficient spraying and homogenization Memory keys for three parameter combinations High sample throughput due to short grinding times and two grinding stations Drive: single-phase AC motor Rated power: approx. 184 VA Weight: 20 kg Sample volume: max. 2 x 20 ml Working principle: percussion effect Max. Feed particle size: 8 mm Workplace emission level: 76 dB(A) Sound power level: 89 dB(A) Thinness: < 5 μm (depending on material) Dimensions: 300 x 470 x 410 mm Delivered without grinding bowls and without balls Some traces of rust Year of Manufacture: 2004
An industrial Risco double-shaft paddle mixer from a poultry farm is available. Mixing shafts: 2, nominal bowl capacity: 1300l, max. batch capacity: approx. 1300kg, drive power: 15kW, homogeneity: almost 100%, machine dimensions X/Y/Z: approx. 2600mm/1300mm/1500mm, weight: approx. 1550kg. Including a lifting and tipping device. Documentation available. An on-site inspection is possible.
A Rühle vacuum cooling mixer for the food industry is available. Container volume: 400l, max. filling capacity: 300l, mixing arm speed: 25rpm, lifting aid load capacity: 400kg. Machine dimensions X/Y/Z: approx. 1900mm/2150mm/1650mm, weight: approx. 1500kg. Including an integrated feed and lifting system. Documentation available. An on-site inspection is possible.
maximum number of results exceeded
please refine your search
