meat vacuum mixer used for sale

Throughput depending on material type, speed, and cutting set Capacity: up to 2.500 kg/h Main motor power: 10 KW / 15 KW Power supply: 380 V, 50 Hz Dimensions of the machine in cm: Width: 110 Lenght: 90 Height: 125 Delivery time: 5 working days after advanced payment

RÜHLE FROZEN BLOCK CUTTER, TYPE GFR 450 Technical description: Guillotine for cutting frozen meat and other types of frozen blocks such as frozen fish blocks, frozen blocks of vegetables and fruits to minus 20 degrees Celsius. The Ruhle guillotine achieves a capacity of up to 3000 kg/h and has also been adapted for inclusion in the technological line. The device has been equipped with 4 vertical cutting knives, which allows fine shredded cut block. A separate container for felling and very accurate feeding of the trolley to the finished product minimizes the loss of raw material. Maximum cut dimensions of the block: 450×250 (mm)

Thompson Meat Machinery mobile mixer/grinder, type: 4000, serial number: 4000.M1.2.02, 415 V, 50 Hz, 29.2/26.5 A, 15 kW, plate diameter: ø 152 mm, total dimensions: 1350 mm x 900 mm x 1500 mm. Without plates and knives.

Excluding table

Rewebo RF 100-B butcher's shop meat grinder Voltage: 380 volts Power: 3.0 kW Protection class IP 54 Dimensions: 60x110cm H112cm You can find more articles in our shop! International shipping costs on request!

Tilting

Large capacity mixer. Its condition is of occasion equipment completely revised and reconstructed, in its entirety (re-release) guaranteed. the mixer, mixer, vacuum massager of the Spanish manufacturer Sia, model AM-352-A. Characteristics: they consist of a cylindrical container and hemispherical bottom, inside which and in the middle of an intense vacuum, some blades rotate (in both directions, at will or automatic), which produce a double movement of the paste, in crossing and alternative overlap, which allows kneading, mixing and massaging all kinds of pastes, without pressure, without friction, Bruising or harmful heating, in addition to distributing perfectly and in a minimum of time, all the components of the mixture. These qualities stand out above all the kneaders-mixers-massagers on the market. On the other hand, and as a consequence of the depression created and the extracti ...

Height 1950 Width 1300 mm Length 3000 mm Voltage Electrical: 400V 50Hz 3N Installed Power 45 kw Main material Stainlees Steel Throat Diameter 180 mm Feeding System Hooper Throat Material Stainless Steel

Mixing Grinder 130 mm hole plate diameter Throughput depending on material type, speed and cutting set Capacity: up to 3.000 kg/h Main motor power: 8.5 KW Power supply: 380 V, 50 Hz Dimensions of the machine in cm: Width: 80 Length: 130 Height: 130 Hopper capacity approx 300 liters (mixing capacity depending of meat up to 200 kg) Worm, worm housing and closing are completely stainless Delivery time: 10 working days after advanced payment

Mixing Grinder 114 mm hole plate diameter Throughput depending on material type, speed, and cutting set Capacity: up to 2.500 kg/h Main motor power: 5 KW Power supply: 380 V, 50 Hz Dimensions of the machine in cm: Width: 80 Length: 130 Height: 145 Hopper capacity approx 150 liters (mixing capacity depending on meat up to 100 kg) Worm, worm housing, and closing are completely stainless Delivery time: after the advanced payment machine is ready for delivery

Meat grinder with mixer Manufacturer: Sind Model: S32A Dimensions: 800x700x1200 mm Electrical power: 3kW + 1.1kW Capacity: 800 - 1.000kg/h

The Velati F4 continuous meat cutter, made entirely from stainless steel, has been designed to transform a block of meat into meat pieces, using a blade system specially devised to avoid damaging or crushing the meat. A combined blade structure, consisting of an oscillating guillotine blade and circular saw blades, allows the meat to be processed at various temperatures and cuts both the lean and fat meat. The machine can produce up to 8-10 tons per hour. Velati meat cutter is driven by a conveyor, whose speed can be adjusted via a variator, allowing both the hourly production rate and the thickness of the cut pieces to be controlled. Velati meat cutter is equipped with inverter which regulate the feed belts. The F4 models is equipped with touch-screen control and PLC which can configure and store the different work programmes. The machine is also fitted with a safety system that is cont ...

Producer: INJECT STAR Type: FPW 17 Internal dimensions: Length 1620 x width 560 x height 1480 mm External dimensions: Lenght 1000 x width 500 x height 1050 mm 1 piece - not complet. Used pneumatic meat press for meat and bacon INJECT-STAR type FPW 17 with the possibility of the time setting and the automatic program - Air consumption approx. 7 bar Ask for an offer iNTER-WiBA Sp.J. ul. Krakowska 263 PL 43-305 Bielsko-Biala USt-IdNr.: PL547-17-47-669 tel. 0048/33 812 58 60 fax. 0048/33 812 58 36

Automatic slicer Bizerba A 404, with base frame. The machine is immediately available and can be tested in Koblenz, Germany.

Automatic slicer Bizerba A 404 with base frame. The machine is immediately available and can be tested in Koblenz, Germany.

Producer: Servotech 250 mm Description: Servotech (Brand new) -Throat diameter 250 mm -Output 5000 - 10000 kg/h -One speed motor -Full power 37 kw -External dimensions: 2070 mm x 1070 mm x 1685 mm -Hopper capacity aprox 300 l -Total wiegth 1500 kg -Machine is fully made of stinless steel -Mixing /grinding temperature to -15°C -Two sets of knives; one for frozen, and one for fresh meat.

Laska angle grinder WW 130, 130 mm, 1-speed grinder, frozen meat version, all stainless steel, ergonomic control, saftey cover for cutting set hinged and electrically interlocked, saftey grid for hopper. The machine is immediately available and can be tested in Koblenz, Germany.

Maja dereading machine The ESM 3550 is the ideal solution for the manual derinding of round meat pieces. With the version ESM 3550 / 1 ham and shoulder can be defatted in the same operation: The additional installation (without tools) of the twin blade-holder allows separation of skin from fat and fat from meat - easy processing and increased yield!

Wolfking Belham Multi needle injector Model:B1-15S Serial:8207-01303 120 needles, walking bed product advancement,

Seydelmann automatic grinder AE 130, 130 mm hole plate diameter, almost completely made of solid stainless steel, 2-speed working worm, 2-speed feeding worm of stainless steel, conical and extra wide, rectangular to the working worm, approx. 14/18 kW, feeding motor approx. 1,8 kW, separately switchable, hopper capacity approx. 130 litres, with interlocked safety grid, worm, worm housing and closing nut completely stainless. The machine will be available soon and can be tested like in Koblenz, Germany.

Seydelmann ME 130, mixing grinder, hole plate diameter 130mm, Unger cutting system, working worm 2 speeds, 1 mixing speed, safety grid. You are very welcome to test the machine in our facility in Koblenz, Germany.

Seydelmann AD 114 automatic grinder, 114 mm, almost completely made of solid stainless steel, two speeds on working worm, two speeds on feeding worm, safety grid. The machine is immediately available and you are very welcome to test the machine in Koblenz, Germany.

Seydelmann AU 200-B angle grinder, 200 mm hole plate diameter, almost completely made of solid stainless steel, with loading device. You are very welcome to test the machine in Koblenz, Germany.

Magurit frozen meat cutter

K+G Wetter D 114 Typ 409 mixer automatic grinder, 114 mm hole plate diameter, almost completely made of solid stainless steel, mixing unit with mixing-worm and paddle-mixing-shaftmain switch and electric control integrated in machine housing. YOu are very welcome to test the machine in Koblenz, Germany.

MADO MEW 620 Automatic Grinder, performance 1400kg/h, bowl capacity 35kg, stainless steel construction, Unger Cutting System reduces handling and minimizes heat rise. You are very welcome to inspect and test the machine in our facility in Koblenz, Germany.

A meat grinder Düker REX AWN-130 L

Magurit Fromat 042 eco, frozen meat cutter with manual lift, cutting dimensions up to 480mm x 250mm x 750mm, processing temperature -25°C. You are very welcome to test the machine in our facility in Koblenz, Germany.

Hydraulic stainless steel freezer block cutter (guillotine) with loading for meat/fish/vegetables/cheese. NEW MACHINE IMMEDIATELY AVAILABLE FROM STOCK 2 pieces cutting knife 5 pieces cross cutting knife Cutting room: 460 x 220 x 750 mm Cutting temperature: up to -25° C Cutting capacity: up to 1,600 kg/h Push button control Hydraulic loading Machine dimensions: Width: 90 cm Length: 220 cm Height: 185 cm Weight: 550 kg Connection: 5.0 kW Voltage: 400 V, 50 Hz CE mark: yes

K+G Wetter D 114 Typ 409 mixer automatic grinder, 114 mm hole plate diameter, almost completely made of solid stainless steel, mixing unit with mixing-worm and paddle-mixing-shaftmain switch and electric control integrated in machine housing, performance max. approx. 2,400 kg/h, hopper capacity approx. 110 liters, electrically interlocked safety grid for hopper. You are very welcome to inspect and test the machine in our facility in Koblenz, Germany.

Laska W 130-1 automatic grinder, 130 mm, hopper capacity 42 Liters, control via push buttons. You are very welcome to test the machine in our facility in Koblenz, Germany.

Meat processing equipment from a modern German butcher's shop for sale. The equipment consists of: • Seydelmann AD 114 automatic grinder • Kilia Meister Plus 50, 50 liters bowl cutter with variable knife speed • Vemag Robby Typ 136 vacuum filling machine with casing holding device • Poly Clip SCD 7095 clipping machine • Stiller can seaming machine DV 10 PS • Maja SA 85 S ice generator • Vakona ESK 125 Tumbler • Stein smoke house • scales, slicers, moulds, stainless steel tables If desired we can arrange worldwide delivery and send our German master butcher to instruct your staff on-site.

Model: M130 The machine is massive, made entirely of stainless steel. Equipped with a protective cover on the neck and on the receiving hopper. The neck is massive, cast with spiral grooves. The tool set of the machine consists of a large working auger, a massive nut, knives with a cast plate Robot C4 - 2 pcs., kidneys - 2 pcs., grids of sizes: 3,4,5,5,7-8, 10 and 13 mm. , distance sleeve - 2 pcs., Mercedes - fixing sleeve The machine is extremely reliable. The electrical components and bearings used in the machine are of leading global brands. Powerful motor – 8 kW, built into the machine. There is an additional lever for automatic extraction and easy disassembly of the tools. Technical data: - neck diameter: 130 mm. – capacity of the receiving hopper 65 l. – 2 auger speeds – 5 cutting tools The machine is patented and has a CE ...

Can make meatballs and burgers up to 130mm in diameter. and height up to 30 mm; – The height can be adjusted; – Equipped with a speed controller; – Limit switch for more tape security; – Motor: 0.3 kW – Single-phase motor – Hopper capacity 24 l. Standard shapes: Round burgers with diameter: 22 mm. 32 mm. 40 mm. 65 mm. 100 mm. 115 mm. 130 mm. Round meatballs with diameter: 22 mm. 32 mm. 40 mm. 65 mm. Depending on the chosen thickness, a different weight of the final product can be achieved with one mold. Accessories: As standard, the machine comes with one mold. As an option, you can also order: Round burgers with a diameter of: 22 mm. 32 mm. 40 mm. 65 mm. 100 mm. 115 mm. 130 mm. Round meatballs with diameter: 22 mm. 32 mm. 40 mm. 65 mm.

K+G Wetter AW 114 Typ 271 automatic grinder, main switch and control integrated in the machine housing, surface - hopper - worm housing - worm all stainless steel, push button control, saftey grid electrically interlocked, ejection for worm and cutting set, hole plate diameter 114 mm You are very welcome to test the machine in our facility in Koblenz, Germany.

Magurit Unicut 555 frozen meat cutter / dicer, with lift, cutting dimensions up to 480 mm x 250 mm x 650 mm, processing temperature -25°C, knife head with 18 knives You are very welcome to test the machine in our facility in Koblenz, Germany.

Kilia grinder and paddle mixer Leopard G-160 / 500 ltrs., combination consisting of 500 liters paddle mixer and 160 mm grinder, with loading device. You are very welcome to test the machine in our facility in Koblenz, Germany.

Seydelmann frozen meat grinder GW 300, all stainless steel, for frozen block up to -25 degrees, measurements max. 900/500/150 mm, hopper capacity approx. 450 liters. You are very welcome to test the machine in our facility in Koblenz, Germany.

K+G Wetter Mixer-Angle-Grinder E 130 mm type 279 with loading device, capacity of hopper (with hopper attachment) 245 l. You are very welcome to test the machine in our facility in Koblenz, Germany.

Magurit Fromat 042 frozen meat cutter with lift, cuttung dimensions up to 480 mm x 250 mm x 750 mm, cutting temperatur up to -25°C, capacity up to 1,500 kg/h, 4 kW You are very welcome to test the machine in our facility in Koblenz, Germany.

Baader 601 Bone separator Condition: Good, working Baader 601 separates raw meat material from waste components - cartilages, veins, skin and bones. A flexible squeezing belt transports a product to a rotating perforated drum. There the raw material is go through a brief pressing operation. The hard particles such as bone and skin stay outside, soft parts are pushed inside the drum through the holes. Such model of separator differs by improved construction of loading and reliability. It is able to process coarse raw material such as shoulder bones. Capacity: up to 700 kg per hour Drum: 1, 3, 8 mm Electricity: 400 V - 3 - 50 Hz, 14 A Power consumption: 4 kW Dimensions (LxWxH): 1800 x 1080 x 1170 mm

Automaton mixer grinder KOLBE MW52 – 120 Specifications: Type: MW52 – 120 400 volts / 50 Hz / 15.2 + 2.8 A / 7.5 + 1.1 kW Year of construction 2019 Perforated discs diameter 130 mm Cutting system: Enterprise E 52 Hopper capacity: 120 L Conveying capacity: approx. 2000 Kg/h with mixing device Total dimensions: W/H/D 92.3 x 135 x 135 cm Weight: 560 kg Equipment: One speed for working screw and mixer Stand, funnel, wolf housing, screw and mixing blades made of stainless steel Locking nut stainless Combi hook wrench Housing spout protective cover Push button switch Connection cable with CEE phase plug Machine mobile with 2 swivel castors and 2 fixed castors Original price meat grinder in this version: approx. EUR 30.000,- Function checked, condition & accessories see original pictures.

Automaton mixer grinder KOLBE MW52 – 120 Specifications: Type: MW52 – 120 400 volts / 50 Hz / 15.2 + 2.8 A / 7.5 + 1.1 kW Year of construction 2018 Perforated discs diameter 130 mm Cutting system: Enterprise E 52 Hopper capacity: 120 L Conveying capacity: approx. 2000 Kg/h with mixing device Total dimensions: W/H/D 92.3 x 135 x 135 cm Weight: 560 kg Equipment: One speed for working screw and mixer Stand, funnel, wolf housing, screw and mixing blades made of stainless steel Locking nut stainless Combi hook wrench Housing spout protective cover Push button switch Connection cable with CEE phase plug Machine mobile with 2 swivel castors and 2 fixed castors Original price meat grinder in this version: approx. EUR 30.000,- Function checked, condition & accessories see original pictures.

K+G Wetter Electric-Grinder D 114mm with sorting device, year 2007, with unger cutting system. You are very welcome to inspect the machine at our facility in Koblenz, Germany.

Düker Rex mixer-automatic grinder D 114 mm, type AW 114. You are very welcome to test the machine in 56070 Koblenz, Germany.

Alexanderwerk grinder D 114 mm, stainless steel. You are very welcome to inspect the machine at our facility in Koblenz, Germany.

+ G weather mixing angle Wolf G 160 mm type 449 with loading, mixing unit with mixing screw and paddle mixing shaft, hopper capacity (the Ausf. Funnel attachment) 245 litres. Gladly we invite you, to visit the machine with us in 56070 Koblenz.

Magurit Fromat 042 profi frozen meat cutter with lift, cuttung dimensions up to 480mm x 250mm x 750mm, cutting temperatur up to -25°C, capacity up to 1,500 kg/h, 4kW. You are very welcome to inspect the machine in our facility in Koblenz, Germany.