subcategories
(3rd category level)
Manufacturer:
(Category: 703)
DEMONSTRATOR Meat grinder Perfect for grinding meat, fish, vegetables and other products. Capacity about 150kg/h. This meat and vegetable grinder is made entirely of stainless steel. Due to the off-centre position of the feed neck, this grinder has excellent pull-in capacity, even of goods that have already been processed. The grinder housing can be completely removed from the engine by means of a quick-bolting system with embossed cables, and the stainless steel screw is guided in a special plastic bearing. The branded gear gear motor built into the high-base unit guarantees high performance even during continuous operation. The machine is equipped with 1 forward gear and impulse stage for reverse running. Smooth inner surfaces in the grinder housing noticeably reduce the frictional resistance for the meat, characteristic of which is the low meat residue in the cutting set. The m ...
Electric heating: 28 kW Adjustable air circulation Pneumatically controlled fresh air, exhaust air, and smoke damper Cleaning: foam cleaning Smoke feeding: on customer request Smoking material: wood chips Without the after-burning system Installation dimensions of the machine in cm: Width: 150 Lenght: 145 Height: 275 Trolley dimensions in cm: 100 x 100 x 200
The Ilpra FS 5000 is equipped with twin stages of all stations, the filling heads are built to fill various products ie. Yoghurt, Cream, Sauces, Milk, Fruit pieces of 1 cm, Custard, Etc. The easy maintenance makes these machines highly recommended in production floors keeping productivity at a steady pace. Ilpra cup fillers are mainly driven by a main motor and signals for the air cylinders to take action on each station. The filling volumes depend on the clients needs, therefor these have a standard filling volume of 50-500 ml per cup, we can enlarge the filling volume by increasing the diameter of the filling cylinder on request., Cup Diameter: 95 mm Outside diameter , Filling Range: 50-500 grams , Capacity: 4800 cups/Hour , Stations: Cup Dispenser -> Filling -> Aluminium Lid Applicator -> Sealing -> Date Stamping -> Out-feed Conveyor , Guarding: Fully Enclosed Cabin , Control Panle: S ...
Type: PowerGrind280 Serial number: 5000067561 Year of construction: 2010 Hole plate diameter: 280 mm Capacity: 5.5 - 8.5 t/h frozen blocks Hopper: 600 litres Power: 3 x 400V, 50Hz, 160kW Dimensions: 3250 x 1650 x 2450 mm Weight: 5000 kg Including trolley for removing breaking worm and trolley for screw, plates and knives
Type: 604-518 Serial number: 120002743-10 Year of construction: 2018 Drum: 1.3 mm Compressed air: 6 Bar, 50 l/min Power: 3 x 415V, 50Hz, 8.5kW Dimensions: 1500 x 1700 x 2400 mm Weight: 1460 kg Working hours: 1465 hours With hopper and tamping device
Type: OptiFlour 600 II Serial number: 2215 Year of construction: 2013 Belt width: 600 mm Power: 3 x 400V, 50Hz, 5.3kW Dimensions: 2750 x 1650 x 2300 mm Weight: 1025 kg GEA OptiAir cyclone Type: OPA Serial number: 515 Year of constuction: 2011 Power: 3 x 400V, 50Hz, 4kW Dimensions: 1350 x 950 x 1800 mm Weight: 450 kg
Type: A510 Serial number: 10597961 Year of construction: 2009 Belt width: 300 mm Speed: max 250 slices/min Slice thickness: 0.5 - 30 mm Infeed length: max 600 mm Product diameter: max 210 x 180 mm Stacking height: max 60 mm Blade diameter: 420 mm Power: 3 x 400V, 50Hz, 2.3kW DImensions: 2350 x 800 x 1850 mm Weight: 420 kg
Extended twisting gear for Vemag filling machine Robby or DP, to put a metal detector in between, older model, functional, smooth-running
Extended twisting gear for Vemag filling machine Robby or DP, to put a metal detector in between, functional, smooth-running, very good used condition.
Slicer line with insert Suitable for slicing cooked ham in bread loaf and tunnel large form as well as 105 cal. Boiled sausage Knife: Multivac/VC, reserve, sickle, 23°/5°, z-toothed Line consisting of: - Slicer, manufacturer VC999, type SL600 Scale, 4-lane walk-through checkweigher with 4-lane rocker, manufacturer VC999, type CW404 scale, 4-lane walk-through checkweigher with 4-lane rocker Automatic inserter, 4-lane, for film widths from 420 - 620 mm, manufacturer VC999, type SB620 Description: SLICER SL600 Automatic central loading: - Ergonomic working heights allow easy manual product loading and line connection - 800 - 1000 mm loading height Servo anqetriebene production guide above and below: - Servo-driven product guide belts at the top and bottom ensure precise, even, pressure-free and gentle feeding of the products during cutting - Servo dri ...
Handtmann VF 50 incl. turning device and complete accessories
Clipping machine Manufacturer: Technopack Easy and fast closure of artificial casings and natural casings in the caliber range from 25 to 75 mm. The loops can be attached automatically or manually. Dimensions: 1800x1300x700 mm Weight: 130 kg Operating pressure: 4-6 bar in function as back from customer
The hydraulic automatic tilting kettle with a capacity of 600 liters is designed for professional use in the food processing industry. The hydraulic tilting system ensures easy and safe emptying of the contents. The double jacket with thermal oil provides even heat distribution and precise temperature control, making it suitable for cooking, mixing, and thermal processing of soups, sauces, jams, creams, and ready meals. Manufactured from high-quality stainless steel, it ensures durability, hygiene, and long service life. Technical specifications: Hydraulic automatic tilting kettle Manufacturer: Sind With cover Double jacket- thermal oil Volume: 600 liters Power: 30.7kW Made out of stainless steel Machine dimensions in cm: Length: 205 Width: 158 Height: 123
The Schröder N55 Injector is an industrial multineedle injector designed for professional food processing operations. Equipped with 55 needles and a conveyer belt system, it ensures even injection of brine, marinades or other liquids into meat products. Its stainless steel construction provides durability and hygiene, while pressure and speed controls allow precise process adjustment. Suitable for medium to large production environments requiring high throughput and consistent results. Technical specifications: Manufacturer: Schröder With transport belt Stainless steel construction 55 needles Approximate dimensions in cm: Length: 240 Width: 110 Height: 150 Control: pressure regulation and speed control Application: meat processing, injection of brine/saline into muscle products
Slicer Sharpen V330, Stainless steel housing, with new rubber feet, Connection 400 V, dimensions LxWxH approx. 60x62x45cm, weight approx. 53kg, good used condition, fully functional
Slicer Bizerba VSI 330 F, Fully automatic machine on mobile base, built in 2019, Connection 230 V, dimensions LxWxH approx. 110x80x150cm, weight approx. 173kg, very good used condition, fully functional
We sell here a vacuum tumbler with cooling from the manufacturer Günther, type GPA 200K in a good used and functional condition. The machine was built in 2004, runs on 400 volts, 1.5 kW, completely stainless steel, rollable, container tiltable, volume 200 liters, capacity 140 kg, programmable control, workshop tested, immediately ready for use, dimensions W/D/H 175/82/160 cm, others on request.
Butter-Homogenizer / Microfix, fationalizes the processing and packaging of cold store butter by reducing the time of defreezing (butter having a temperature of ±4 °C can be homogenized by the Microfix, homogenizing butter having lower temperatures depends on the consistency of the butter). Automatic adaption of the Microfix to the output of the combined packaging machine by means of a feeler switch is possible (not on the machine at this moment). Improving the quality of the butter by ensuring finest water dispersion resulting in an increased shelf life of the homogenized and packed butter. Likewise, the spreadability of the butter is improved. Reducing the loss of water during the packaging operation. The Microfix is adapted to the actual quality of butter by means of a variable feed worm drive, rotors having different numbers of knives (this machine is equiped with a stainless steel ...
A cooled table-top meat grinder Mado is available. Cutting set diameter: 82mm, Cutting set version: 3-piece Unger system, Motor power: 1.45kW, Motor speed: 2700rpm, Auger speed: approx. 210rpm, Throughput capacity: approx. 400kg/h, Tray volume: 6l, Machine dimensions X/Y/Z: approx. 550mm/550mm/500mm, Weight: approx. 90kg. An on-site inspection is possible.
Offered is an abdominal opener for poultry processing. Manufacturer: LINCO Food Systems (formerly Lindholst & Co A/S, now BAADER) / Tielemann Food Equipment BV, type 12 CW / 8 inch. Compatible bird sizes (live weight): standard broilers: 1.5-2.5kg, large broilers: 2.5-4.0kg, laying hens: 1.0-4.5kg, throughput: 6300 birds per hour (BPH), noise emission: below 80dB(A) at the workplace, machine dimensions (W/D/SM): 1380mm/1350mm/776mm, machine weight: approx. 550kg. Suitable for integration into industrial poultry slaughter and evisceration lines. Inspection possible by arrangement.
Injector Günther PI 17, brine injector with 17 needles, new hoses and clamps, new pressure gauge, Connection 400V, dimensions LxWxH approx. 140x56x180cm, weight approx. 263kg, Year of manufacture 2002, good used condition, fully functional
Maurer FKS 2000 Apollo boiling kettle, electrically heated in a glycerine bath, 200 liter capacity, external MC control and control box, with boiler float, core temperature sensor, replacement cover gasket, Connection 400V, 16.9kW, boiler inner dimensions LxWxD approx. 91x53x45cm, Total dimensions LxWxH approx. 140x84x102cm, weight approx. 390kg, Built in 1999, but hardly used, top condition, almost as new, checked by the bricklayer.
Cutter Seydelmann K60U, 60-litre bowl, Machine completely in stainless steel, 2 speeds, mixing passes, with 6mm cutter head, spare knife, cutter head wrench, Connection 400V, 22kW, dimensions LxWxH approx. 125x100x128cm, weight approx. 790kg, good used condition, fully functional
Filling machine Frey Heinrich 20, Piston filler with a capacity of 20 litres, machine mounted on a mobile base, Connection 400V, dimensions LxWxH approx. 60x55x120cm, very good used condition, fully functional
Cutter Capacity: 25 liters Voltage: 380V / 50Hz / 3 phase Power: 1.5kW Speed: 1000-2000 rotating/min Dimensions: 85x67x70cm Packing size: 93x78x71cm With a temperature probe and the net
The pictured cutter is sold by MADO of the type Garant MSK760 H II with a volume of 35 litres. The cutter is made entirely of stainless steel, it has a 6 mm cutter head with an additional spare blade set and comes with an operating manual. The cutter has the following technical data: Bowl volume: 35 litres Number of knives: 6 Speed: 1750-3500 rpm Bowl speed: 12/24 rpm Knife shaft power: 9/11kW Voltage: 400V Fuse: 32A (slow-blow) Dimensions: 1240x890x1130H (1240x1260x1740H with lid open) Footprint: 1040x550mm Weight: 430kg Keys for the cutter head and documentation are part of the machine The machine runs neatly and smoothly, video of the test run available Only the noise protection cover has a crack, but this was professionally glued by the previous owner.
Electric heating: 28 kW Adjustable air circulation Pneumatically controlled fresh air, exhaust air, and smoke damper Cleaning: foam cleaning Smoke feeding: on customer request Smoking material: wood chips Without the after-burning system Installation dimensions of the machine in cm: Width: 155 Lenght: 150 Height: 275 Trolley dimensions in cm: 90 x 100 x 200
MADO MEW621 Ultra Automatic Mixer Grinder used Mixing tool and feed screws can be dismantled in seconds without tools B98 Unger Cutting Kit + Spare Blades and Various Discs mobile on wheels, two of them braked Safety shut-off on the lid, button for return Only the toggle of the main switch is missing, which does not harm the function Machine has an absolutely smooth and smooth run, video of the test run available
Laska Mixer ME 250 meat mixer, known for its exceptional durability, reliability and high efficiency in demanding production environments. This model has a 250 liter bowl and a maximum mixing capacity of up to approximately 200 kg, making it an ideal choice for professional use. It is made of heavy industrial stainless steel, which ensures a long service life and easy maintenance. With installed motor power from 5.5 kW to 8.5 kW, the Laska ME 250 guarantees homogeneous mixing of various meat mixtures while preserving the structure and integrity of the product particles. Choose a reliable partner for efficient production!
