manufacture used for sale

Vecoplan VTH/55/15/2 edging chipper – German production – autoreverse – for the production of technological chips – year of manufacture 1995 TECHNICAL PARAMETERS: inlet width 550 mm inlet height 130 mm two knives engine power 55 kW conveyor belt length 4300 mm sieve 50 x 50 mm toothed upper pulling shaft toothed lower pulling shaft rotor width 560 mm rotor diameter 560 mm hydraulic lifting of the feed shaft transport dimensions (length / width / height) 550 / 230 / 120 cm weight ~ 3000 kg

Machine Details Stock-No. 1105-03837 Type of machine Machining Center - Vertical Make WILLEMIN MACODEL Type 408 S Year of manufacture 2000 Type of control CNC Storage location HAGUENAU FRANCE Country of origin SUISSE Delivery time immediately Freight basis ex Site Technical details x-travel 250 mm Y-Travel 200 mm Z-Travel 300 mm control FANUC 16 I MB A-Axis -30° - +100° C-Axis 360° table load 200 kg Rapid traverse 20000 m/min turning speeds 35 - 30,000 rpm tool taper HSK E40 power capacity - milling spindle 15/10 kW Tool piece magazine with 92pos. tool diameter 80 mm Tool-Dia with Free Toolbox 95 mm tool length 200 mm tool weight 8 kg Tool Changing Time 3.6 sec total power requirement 35 kW weight of the machine approx. 2.5 t dimensions of the machine approx. 2.0 x 2.1 x 2.65 m Accessories Chip conveyor Coolant system electr. Hand Wheel Coolant ...

The four-axis horizontal machining center is designed for milling, boring, hole drilling and threading in the manufacture of complex parts from various metals and alloys in batch production. The machine is equipped with an automatic tool changer with a magazine for 62 positions, an automatic pallet changer Partially disassembled.

Year of Manufacture/SO/GO: -/-/1981 The machine is in good technical condition. Max. circulating diameter: 630mm Distance between spikes: 3000mm Accessories: chuck and bezel By prior arrangement, the possibility of a tour in progress.

The machine is in good technical condition. Circulating diameter above the bed: 550mm Distance between points: 3000mm Accessories: chucks, lunettes Weight: 3220kg Possibility of inspection in operation by prior arrangement. Year of manufacture/SO/GO: 1979/-/1993

The machine is in good technical condition. Circulating diameter above the bed: 630mm Distance between points: 4000mm Accessories: chucks, lunettes weight: 3,500 kg Upon prior arrangement, the possibility of inspection while in operation. Year of manufacture/SO/GO: 1979/-/1993

Table dimensions X 2000mm Y 1000mm Z 1000mm, Heidenhain 426 control system, machining head type K (smooth machining in five axes), year of manufacture 1998. The machine is in operation and can be tested.

- Churn Lutetia T1 for meat -Vacuum - Year of manufacture: 2011 - Meat + brine capacity: 400 kg - Overall dimensions (L x W x H): 2150 x 1230 x 1730 mm. - Weight: 800 kg - Volume: 950 liters - Diameter: 972 mm - Frequency: 50 Hz. - Power: 3.1 kW.

Probatone 5kg in very condition for sale! Year of manufacture is 2017 Only 1000 hours roasted! (evolutive, loaded at 3.5kg per batch) Premix gas burner that can work with all gas types 3 phases supply BT & ET temperature logging on Artisan or Cropster Including cyclone Type "The roasters agency" in the search bar to see other listings

Here we offer a well-maintained injection moulding machine. Manufacturer / Type:BOY Type: XS (100-14) Serial No.:will be communicated in case of interest Year of manufacture:2015 Operating hours:25.000 h Version:Procan Alpha 2 / S1 Clamping unit Clamping force:100kN tie bar distance:160 x 110mm (2 tie bars) Mould installation height min.:100mm Platen distance max:250mm Ejector stroke:50mm Injection unit: Injection unit:cylinder ø14mm Shot weight max.:6,1 g/PS Injection flow:22g/sec Spec. injection pressure:2298 bar Sprue extractor integrated Dimensions & weights: Weight with control cabinet: 485 kg. Length: 1480mm Width (machine only):520mm Height min - max:1380 - 1690mm Oil capacity:28 L The visible mini-laminar flow unit and the stainless steel area cover belong to the machine Other possibly visible peripheral devices do not belong to t ...

Max. speed range: 5000 rpm, bar capacity: 65 mm, max. turning diameter: 200 mm, max. turning length: 400 mm. Number of spindles: 2, tool changer: 2x 14, Siemens control. Including outfeed conveyor, KNOLL 400S-1 chip conveyor (year of manufacture: 2016), switch cabinet with cooling unit, CO2 extinguishing system and INDEX bar loader. General overhaul in 2016.

With milling disks, tools and accessories, without documentation, on-site inspection is possible, year of manufacture unknown.

There are 2 notching machines available. Rotox SAF 165, year of manufacture: 2007, saw blade diameter: 250mm, speed: 2800rpm, pressure: 6-7bar, weight: 273kg. Hanning BVH8K2, speed: 2700rpm.

A complete pallet strapping and wrapping line is available, with centering, inspection, strapping, wrapper, buffer stations, control and several roller conveyors, without accessories, length: approx. 24m, has been overhauled several times, the individual components are of different years of manufacture, an on-site inspection is possible.

There are 17 identical air cleaners available, filter stages: 2, filter method: storage filter, filter area: 20m², filter type: filter cartridge, filtration efficiency: 99.99 %, filter class: HEPA filter H14, air flow rate: 300-1500 m³/h, motor power 0.75kW, length: 836mm, width: 793mm, height: 1660mm, weight: 148kg, year of manufacture: 3x 2021, 14x 2022.

Various hydraulic aggregates are available as a package. Year of manufacture and technical data unknown. The blue RexRoth is available 4x. The machines are only sold as a package deal. Individual machines cannot be sold separately.

Schaal SEP 40 Automatic Punching Press. Year of manufacture: 1993. Completely revised in 2023 with new Siemens PLC control. Nominal capacity: 400 [kN] (40 [t]). Min./Max. number of strokes: 100 – 500. Ram adjustment: 70 [mm]. Variable stroke: 8 – 70 [mm]. Ram surface area: 340 – 300 [mm]. Stroke range: 8, 10, 15, 20, 25, 31, 36, 41, 46, 50, 54, 58, 61, 64, 66, 68, 69, 70 [mm]. Table dimensions: 550 x 580 [mm]. Fitted with gripper feeding device SZV 2. Width of strip: 8 - 120 [mm]. Feed length: 2 – 80 [mm]. Feeding thickness: 0.1 – 2 [mm]. Feeding: 180 [°]. Feed accuracy: ±0.01 [mm]. Drive power: 7,5 [kW]. Dimensions (H x W x L): 2300 x 1600 x 1400 [mm]. Weight: 3800 [kg]. Including operating instructions in German and English and schematics included. Also on stock high speed presses: Mabu, Schaal, Bihler and other Bruderer models. Also Ideal BAS welders

We offer, as it is where it is Fruit juice concentrate plant Was running with Juices from Apple, sour Cherry Manufacturer: M&L design is done by ex Gea Wiegand Engineers and was sold through Bucher Still installed, ready to work, in maintained condition Year of manufacture: 1999 Type: Falling film Number of evaporation effects: 4 Water evaporation to/h: 12,7 Inclusive aroma column Combi evaporator, with 120°C pasteurizer Prior sales reserved

We offer, in its current state, from the location Fruit juice concentrate plant Was operated for juices from apple, sour cherry Manufacturer: M&L Construction was realized by ex Gea Wiegand Engineers and sold by Bucher Still installed, ready for operation, in well-maintained, maintained condition Year of Manufacture: 1999 Type: Falling Film Evaporator Number of levels: 4 Water evaporation per hour: 12.7 Including aroma column Combi evaporator, with 120°C pasteurizer Subject to prior sale

We offer, as it is where it is Fruit juice concentrate plant Was running with Juices from Apple, sour Cherry Manufacturer: Unipektin Still installed, ready to work, in maintained condition Year of manufacture: 1990 Type: Falling film Number of evaporation effects --> 5 Water Waterevaporation --> 9 to/h Inclusive aroma column Pre-evaporator Prior sales reserved

We offer, in its current state, from the location Fruit juice concentrate plant Was operated for juices from apple, sour cherry Manufacturer: Unipektin Still installed, ready for operation, in well-maintained, maintained condition Year of Manufacture: 1990 Type: Falling Film Evaporator Number of levels: 5 Water evaporation per hour: 9 Including aroma column With pre-evaporator Subject to prior sale

Power: 152 kW (12/7 — 35°C) Year of manufacture: 2004 Type of refrigerant: R407C Refrigerant circuit: 2 pcs. Heat exchanger: Plate Compressors: 2 pcs. TRANE (scroll) Number of fans: 6 pcs. Dimensions: 3.40+0.20 x 2.33 x 2.25 m. Weight: 1778 kg. Working hours: 353/352/617/617 h. Condition: excellent Product quantity: 1 pc.

Impulse SIP 150-6 dirty water pump. This Impulse dirty water pump is equipped with a reliable Hatz 2M41 diesel engine with an electric start/stop system., Built in a super sound attenuated housing. The pump is equipped with an analogue control unit., This analog control unit is solid built and fully integrated into the pump set., , max. yield : 388 m3/h, max. head : 32 MWK, max. Dirt passage : 90 mm, , Throughput capacity: 388 m3/h, Max dirt passage: 90 mm, Motor brand: Hatz, Max. head: 32 MWK, Max dirt passag: 1800 rpm, Weight: 1555 kg, , = More information =, , Year of manufacture: 2016, Applicable material: Water, Empty weight: 1.700 kg, Cargo space capacity: 6.470 l, Quick coupler system: Yes, Technical condition: very good, Visual appearance: very good, Damages: none, , = Dealer information =, , Aroused your interest? . The sales team will be happy to answer any questions you may ha ...

- Year of manufacture 1985 - manufacturer Bielloni Castello Italy - Screw diameter: 50 mm - L/D ratio: 22 - Rotation speed: 20-100 r/min - Planetary gear (silent) - number of heating zones on the cylinder: 3 including two cooled - cylinder cooling: fan cooling, - water backfill cooling - Main motor power: 49.9 kW, DC - Temperature controllers: K 49 Italian production - regulation "fuzzy control" - Extruder length 2300 mm - Extrusion axis height 500mm - Capacity: 40 - 50 kg/h - Ability to measure mass pressure

- year of manufacture 1985 - manufacturer Bielloni Castello Italy - Screw diameter: 60 mm - L/D ratio: 24 - Rotation speed: 20-100 r/min - Planetary gear (silent) - number of heating zones on the cylinder: 3 including two cooled - cylinder cooling: fan cooling, - water backfill cooling - Main motor power: 49.9 kW, DC - Temperature controllers: K 49 Italian production - regulation "fuzzy control" - Extruder length 2400 mm - Extrusion axis height 500mm - Productivity:60- 90 kg/h - Ability to measure mass pressure

Single screw extruder, Troester year of manufacture 1992 Auger type: 38CrMoA1A, nitrided Cylinder: 38CrMoAlA, nitrided, air-cooled cylinder; Motor power: 55kW A.C. engine – no speed control Engine speed: 1480rpm Screw Diameter:90mm; L/D=38 Degassing system: vacuum pump : 3kw Double degassing Heating zones: ceramic heaters, air-cooled Cylinder cooling - air Output: up to 180 kg/h Net price; 8 500 Eur – cracked reducer body – to be repaired – poor condition of the plasticizing system Net price; 11 900 Eur – repaired reducer body – started

CNC Machining Center for turning and milling NILES SIMMONS Type of machine N 50 MC x 6000 Year of manufacture 2009. Never used. Control system Siemens Sinumerik 840 D Workpiece spindle: B20 Spindle bore diameter: 225 mm Spindle diameter in front bearing: 360 mm Swing over cross slide: 1250 mm Cutting diameter over bed: 1300 mm Working height: 1700 mm Turning length 6000 mm Spindle drive 78 / 87 kW

Machine Details Stock-No. 1105-03848 Type of machine Machining Center - Vertical Make DMG DECKEL MAHO GILDEMEISTER Type DMU50 evolution Year of manufacture 2000 Type of control CNC Storage location from location Country of origin Germany Delivery time by arrangement Freight basis from location, free loaded Price Technical details X-Travel 500 mm Y-Travel 380 mm Z-Travel 380 mm turning speeds 20 - 18 000 rpm spindle taper ISO SK 40 DIN 69871 control Heidenhain MILL PLUS rapid travel x/y/z 30 000 mm/min surface area 500 x 380 mm number of T-slots 7 pieces tool length from spindle nose 280 mm weight of the machine approx. 6 t total power requirement 36 kVA Additional information 3 axis B-axis, C-axis control Heidenhain MILL PLUS magazine places: 32, space requirements with swarf conveyor: about L:3,0:W:2,53xH:3,15m Machine still is placed at the customer  ...

Machine Details Stock-No. 1105-03850 Type of machine Machining Center - Vertical Make FEELER Type FV 1500 Year of manufacture 2000 Type of control CNC Storage location FRANCE Country of origin taiwan Delivery time immediately Freight basis EX WORK Price Technical details X-Travel 1500 mm Y-Travel 750 mm Z-Travel 750 mm tool taper BT 50 spindle drive 15 kW spindle turning speed range 6000 rpm tool change unit 32-speed BT 50 tool changing time 4 sec table-size 1700 x 750 mm table load capacity - central/maximum 1500 kp Rapid Travel X/Y/Z 24 m/min Feeds X/Y/Z -STEPLESS 20000 mm/min total power requirement 40 kVA Weight of the machine approx. 11 t Additional information CNC control HEIDENHAIN TNC 426 A.T.C. for 30 tools BT 50 COOLING TROUGHT THE SPINDLE 20 BARS TABLE 1700 X 750 15 KW 6000 RPM

Machine Details Stock-No. 1105-03755 Type of machine CNC Lathe - Inclined Bed Type Make BIGLIA Type B 501 MB Year of manufacture 2002 Type of control CNC Storage location HAGUENAU FRANCE Country of origin ITALY Delivery time by arrangement Freight basis At Place of the machine Price Technical details turning diameter 500 mm turning length 500 mm control FANUC 18 IT Spindle Bore: 60 mm turning speed range - spindle 5000 rpm Feed Range - Turret / Stepless 1 - 12000 mm/min Rapid Traverse 20 / 12 m/min tool taper direct recording total power requirement 20 kW Weight of the machine approx. 5 t dimensions of the machine approx. 4900x1800x1800 mm Additional information CNC FANUC 18 IT 3AXIS MACHINE

Manufacturer | Manufacturer: Stanko Type | Type: 16k20 Stock Number | Stock Number: 0980 Year of construction | Year of manufacture: 1978 Turning length | Turning length: 1000 mm Swing diameter over bed | Swing diameter over bed: 440 mm Spindelbohrung Spindle bore: 50 mm RPM | turning speed: 12.5 - 1600 rpm Tension | Voltage: 380 V Engine power | Drive power: 10 kW Dimensions (LxWxH) | Dimensions (LxWxH): 2800 x 1200 x 1800 mm Weight Machine | Weight of machine: 2,5 t

Stock # U825V Second hand line by TANG OG WEISS AS (DK) for packaging liquids into plastic bottles. Volume range from 50 ml to 750 ml. Working output of line: - for bottles volume 750 ml - up to 600 pcs/h - for bottles volume in range from 200 up to 400 ml - in range from 800 - 900 pcs/h, - for smaller volume bottles it is possible to assume a capacity in the range of 1000 to 1200 pcs/h. The line consists of: - Container of bottles produced by PACKFEEDER S.L. (Spain) model MN 100-4, - Filling-closing unit manufactured by TANG OG WEISS AS (DK) model TWKS. It includes filling module by TANG OG WEISS AS model TWRF, with two filling nozzles, stainless steel buffer tank with total volume 15 l, rotary table, caps feeder, arm for capping/cap tapping and plate conveyor, - Stainless steel lobe pump manufactured by SSP PUMPS (England) model L2-0017, for feeding the product to ...

Condition: fully functional, with signs of wear Ideal for fast material transport Expertly dismantled and packed Year of manufacture: unknown Condition: Used Model/Type: Strap Manufacturer: unknown total length: approx. 730 mm Total width incl. motor: approx. 760 mm Total width without motor: approx. 730 mm Belt width: approx. 600 mm Strap Type: Smooth Colour: Grey/ Blue Material: Stainless steel/ Aluminum Frame height: approx. 100 mm Drive type: Motor Includes SEW motor Thanks to the excellent workmanship of the belt conveyor, your material glides smoothly to its destination, even under high loads. Tailor-made solutions for your intralogistics. For roller conveyors, belt conveyors, inclined conveyors or telescopes for loading and unloading your goods, we are your competent partner! We would be happy to provide you with an individual offer or advise you on co ...

Brand Allibert Year of manufacture: Used Dimensions LxWxH (mm) Outside: 400 x 300 x 350 (320) / Inside: 350 x 250 x 310 Weight (Kg) ca 1,70 each Number of pieces in stock 1232 Made in Belgium Comments PP PVC box incl. covers ( small amount little damages)

FORMING MACHINE, FORMAX TYPE: PFM-19 Technical description: Serial number: 416 Power supply: 380 V, 3 Ph, 50 Hz, 27.6 kVA, 42 A Conveyor width: 550 mm Format diameter: (3x) 120 mm Dimensions: 3000 x 1000 x 2700 mm The Fl9s hydraulic injection forming system offers extremely accurate weight control and the ability to manufacture a wide range of products at different temperatures. It achieves high performance and forms products with a natural texture and excellent appearance.

Stock Number: 3780 CNC LATHE Manufacturer: EMCO, Type: HYPERTURN 665 MC PLUS Machine NO.: R7AQ2301, Year of manufacture: 2002 Specifications: Max. swing diameter 430 mm dia. Max. rotary. About Bed 600 mm Dia. Turning length 744 mm Distance between spindle lugs 975 mm Main engine power 21/29 kw Main spindle speed range 0-5000 rpm Bore through drawing tube 65 mm dia. C axis - main spindle movement 0.001 degree Y axis 100 +/- 50 mm B Axis Movement Stepless 45 Degree Tool turret 1 with 12 VDI 30 stations Powered stations turret 1 12 pc. - 4000 rpm Y+B pieces. Engine power driven tools 6.7 Kw Tool turret 2 with 12 pc. VDI 30 stations Counter spindle C axis - counter pindel movement 0.001 degree Counter spindle speeds 0-5000 Pr/min Motor power counter spindle 17/22 Kw Control Siemens 840 D Fabr. Power on 10650 hours Controlled in 8 axis - x1-x2-z1 ...

Type: LBS043 / 80 / 1.5 Coil joining machine. Arc welding machine. Pneumatic clamping. Siemens HMI touch screen control. Year of manufacture: 2015. Coil/strip width up to 80 [mm]. Used machine in working condition. Strip length: 15 – 80 [mm]. Strip width: 0.5 – 1.5 [mm]. Cvolfxlg Power: 400 [V] / 50 [Hz]. Equpied with pneumatic shears APE080 and smoothing device with roller. Cutting length: 80 [mm]. Including operating instructions in German, schematics and packing. Delivery from stock. On stock more used machines made by Ideal, Bruderer, Schaal, Mabu, Bihler...

Machine Details Stock-No. 1105-03852 Type of machine milling machining centers - vertical Make DAH LIH SONGS Type LIEDER MCV 2600 Year of manufacture 2015 Type of control CNC Storage location FRANCE Country of origin taiwan Delivery time immediately Freight basis free loaded on truck, ex works Price Technical details X-Travel 2600 mm Y-Travel 870 mm Z-Travel 760 mm table surface area 2800 x 970 mm control HEIDENHAIN TNC 530 spindle turning speed range 12000 rpm spindle drive 15 kW tool adaptor BT 40 Internal Coolant System Feed 20 bar Feed 10 m/min Rapid Traverse 20/20/30 m/min total power requirement 25 kW Additional information used vertical machinig centre witH dual arm toolchanger BT 40 HEIDENHAIN TNC 530 - Dual toolchanger - synchronised tapping - internal coolant with filter - Spindle Oil Cooling 32 TOOLS MAGASIN COOLING TROUGHT THE SPINDLE 20 BAR ...

Stock Number: 3786 PROCESSING Manufacturer: YCM, Type: FV56A Machine NO.: 401397, Year of manufacture: 2004 Specifications: Gr. table load 300 kg Longitudinal movement (X) 560 mm Transverse movement (Y) 410 mm Vertical movement (Z) 450 mm Gr. distance spindle/table 444 mm Spindle speeds 0-8000 rpm Tool changer 20 places Control Fanuc MXP 100I Fabr. Controlled in axes 3 Operating hours spindle 4042 hours Accessories: Pallet changer 2 - 560 x 420 mm Cooling by spindle Operating instructions Length: 2500 mm, Height: 2450 mm, Width: 1965 mm, Weight: 3000 kg

Machine Details Stock-No. 1105-03853 Type of machine CNC Lathe Make MORI SEIKI Type NLX 2500/700 Year of manufacture 2016 Type of control CNC Storage location HAGUENAU Country of origin Japan Delivery time to be agreed Freight basis ex site Price Technical details turning diameter 356 mm turning length 705 mm control MORI SLIM LIN X-AXIS 260 mm Z-AXIS 795 mm power capacity - main spindle 18,5/15 kW Speed Mainspindle 3300 min/-1 Spindle Bore 91 mm spindle nose JIS A2-8 chuck Kitagawa B-212A8 mm max. chuck pressure 3.1 MPa number of toolpositions 12 pos. Shank diameter 50 mm Shank height for square tool 25 mm Turret change time 0.25 sec. tailstock 734 mm slide. of quill 80 mm rapid power traverse in X-and Z direction 30 m/min rapid travel tail stock 7 m/min total power requirement 27,6 kW Weight of the machine approx. 5.8 t dimensions of the machine app ...

WEINIG four-sided planing machine, PM 17, 5 spindles Machine No. 1329-2356 Year of manufacture: 1982 Working width 170 mm Planning height 120 mm 5 spindles: max. tool length 180 mm, 130 mm Feed table length 2000 mm with planing heads 6 spindles arrangement: 1. Bottom 4 kW 2. Right 3 kW 3. left 5.5 kW 4. Top 5.5kW 5. Bottom 4kW / universal Spindle diameter approx. 35 mm Feed speed 6.5 - 49 m/min. manual lubricant pump Incl. 5 tools for all heads Dimension 4500 mm x 1300 mm x H 1500 mm Weight approx. 3800 kg Technical data subject to correction

Machine Details Stock-No. 1105-03856 Type of machine CNC Lathe Make COLCHESTER Type TORNADO T 6M Year of manufacture 2006 Type of control CNC Storage location HAGUENAU FRANCE Country of origin Great Britain Delivery time immediately Freight basis EX WORK Technical details turning diameter 440 mm turning length 450 mm control FANUC 21 ITB total power requirement 15 kW Weight of the machine approx. 4 t Additional information NICE COLCHESTER T 6M FROM 2006 FANUC 21 ITB CUCK TAILSTOCK SWARF CONVEYOR VDI 30 TURRET 12 P LIVE TOOLS BARFEEDER MBF 1000 INCLUD

Machine Details Stock-No. 1105-03857 Type of machine Machining Center - Vertical Make QUASER Type MK 60 II Year of manufacture 1998 Type of control CNC Storage location HAGUENAU FRANCE Country of origin taiwan Delivery time immediately Freight basis EX WORK Technical details X-Travel 1020 mm Y-Travel 610 mm Z-Travel 560 mm tool taper BT 40 spindle drive 25 kW spindle turning speed range 60 - 10000 rpm tool change unit 24-speed BT 40 tool changing time 4 sec table-size 1200 x 635 mm table load capacity - central/maximum 500 kp Rapid Travel X/Y/Z 30 m/min Feeds X/Y/Z -STEPLESS 20000 mm/min total power requirement 40 kVA Additional information CNC control HEIDENHEIN TNC 426 complete covering, A.T.C. for 24 tools BT 40 TABLE 1200 X 635 25 KW 10000 RPM CHIP CONVOYER

Stock Number: 3788 CNC LATHE manufacturer: OKUMA , Type: LVT 400 M - Vertical Machine NO.: 134682, Year of manufacture: 2007 Specifications: Max. swing diameter 480 mm dia. Turning length 300 mm Main engine power 22/15 kw Main spindle speed range 35-3300 rpm C axis - main spindle movement 0.001 degree Tool turret with 12 stations Powered stations turret 1 12 pieces. Driven werkzeuumdr. 30-3000 rpm Control OSP Fabr. Controlled in 3 axes Operating hours spindle 14910 hours Accessories: Load and Unload device Hydr. Chuck Main Spindle OSP P-200 3D-M Kit mm dia Tool setter Chip conveying. Cooling water system. Length: 3500 mm, Height: 2680 mm, Width: 2800 mm, Weight: 9,100 kg

Machine Details Stock-No. 1105-03860 Type of machine CNC Lathe Make MORI SEIKI Type SL 150 Year of manufacture 1996 Type of control CNC Storage location Warehouse Country of origin Japan Delivery time immediately Freight basis ex Warehouse, free on truck Price Technical details turning diameter 420 mm centre distance 580 mm Turning length max. 500 mm Travel X / Y 230 / 520 mm spindle turning speed range 50 - 5000 rpm spindle nose JIS A2-5 bar diameter round max 42 mm spindle bearing diameter 90 mm tool turret - number of stations 12 (12) Tool Taper 20 x 20 tailstock adjustment 515 mm tailstock quill diameter 85 mm tailstock quill taper MT 4 tailstock travel 120 mm Rapid Travel - Longitudinal/Face 24 / 18 m/min Coolant Tank 160 L connected load 21 kVA Weight of the machine approx. 4.1 t dimensions of the machine approx. 7.5 x 2.5 x 1.8 m Additional infor ...

Make : TREPKO Model : 222 KPS Year Of Manufacture : 2004 Machine Dimensions : 1,35 x 1,55x 3,32 metres with conveyor 3,2 meters Product : Butter / Margarine/soft products Cup Dimensions : 115 mm x 75mm Volume : Min 180ml | Max : 500ml Cleaning : CIP Hours : 688,45 Plastic Cup With Aluminium Lid and Cover Cap Condition : Good

Machine Details Stock-No. 1105-03862 Type of machine Machining Center - Universal Make DECKEL Type DMU 60 T Year of manufacture 1998 Type of control CNC Storage location HAGUENAU Country of origin Germany Delivery time CALL ME Freight basis EX WORK Price Technical details X-Travel 630 mm Y-Travel 560 mm Z-Travel 560 mm control TNC 426 HEIDENHAIN turning speeds 12000 1/min tool adaptor SK 40 tool change unit 25 Pos. table: 1000 x 610 mm Universal Head Manual Rapid Traverse 30 m/min Additional information ead manually swivellable, TNC 426 12000 RPM SK 40 El. handwheel, Mode 4, table touch probe, 25 POSITONS TOLLS MAGASIN

Machine Details Stock-No. 1105-03863 Type of machine Lathe - cycle-controlled Make CAZENEUVE Type MAXICA HC 725 Year of manufacture 1998 Type of control CNC Storage location HAGUENAU FRANCE Country of origin France Delivery time immediately Freight basis EX WORK Technical details turning diameter 725 mm turning length 4000 mm control SOMAB PL + S5 + -SOMAB turning dia. Over Face-Slide 670 mm turning diameter over cross slideways 390 mm main drive motor 16 kW spindle turning speed range 2500 rpm Spindle Passage 82 mm Chucking diameter 315 mm taper in tailstock MT 5 total power requirement 30 kW Weight of the machine approx. 5 t Additional information Machine in WORKING CONDITION with NUM-SOMAB PL+S cycle control with MULTIFIX rapif tool holder size WITH STEADY

Machine Details Stock-No. 1105-03864 Type of machine Bed Type Milling Machine - Universal Make HURON Type SXB 723 Year of manufacture 1984/2019 Type of control CNC Storage location HAGUENAU FRANCE Country of origin France Delivery time immediately Freight basis ex works, loaded on truck Price Technical details X-Travel 2450 mm Y-Travel 730 mm Z-Travel 1000 mm table-size 2400 x 750 mm spindle taper ISO 50 control HEIDENHAIN TNC 530 total power requirement 35 kW Weight of the machine approx. 16 t dimensions of the machine approx. 4 X 3 X 3.2 m Additional information UNDER POWER IN WORK GOOD CONDITION retrofiting in 2019 with Heidenhain TNXC 530 End New Geometry

Guillotine shears LOTZE type HSS 20 / 7 Masch. No. Year of manufacture 1953 Cutting length 2050 mm Cutting thickness 7 mm ; used