manufacture used for sale

Air forging hammer Stanko MB 4134 Year of manufacture: 1988 Nominal weight of falling parts, kg: 250 Energy of impact, Kj: 5,6 The greatest number of impacts in a minute: 150 Ram axis-to-frame distance, mm: 420 Working zone daylight, mm: 450 Die impression size, mm: 510 x 80 Main electric motor power kW: 22 Weight of a hammer with an anvil-block, kg: 7850 Price 6500 EUR

– after technical inspection – year of manufacture 2017 – ATEX marking TECHNICAL PARAMETERS: fan power 15 kW flow rate 8000 m3/h compression 4603 Pa vibrating system for self-cleaning filter bags 2 x 0.12 kW Connection diameter 300 mm dimensions (length / width / height) 490 / 125 / 360 cm SET OF PIPES INCLUDED: – 6 pieces diameter 300 mm length 1250 mm – 2 pieces knee 90° – pipe set with tee diameter 250 mm, length 1400 mm – tee 300 mm by 2 x 250 mm – knee 45° – knee 15°

Used whey centrifugation and pasteurization line. Line composition: Hermetic self-cleaning centrifuge, type REDA RE150T, capacity 15,000 l/h; Pasteurization module, type Alfa Laval, year of manufacture 1998. Centrifuge serviced, last service on February 16, 2022 with operating hours counter 12907.

Technical data packing press / can press / metal sheet press: Manufacturer unoTech GmbH Type UPAXX 70 Year of manufacture 2019 Operating hours approx. 3,000 hours Pressing force 700 kN at 315 bar Filling opening chute 420 x 1,250 mm (d x w) Channel cross-section (package dimension) 350 x 500 mm (h x w), length depending on material Drive power 30 kW Connected load 40 kW Power consumption, total 70 A Throughput capacity for empty beverage cans with: one pressing stroke approx. 1.7 t/hour two pressing strokes approx. 2.5 t/hour Achieved compaction approx. 1200 kg/m³ Hydraulic oil tank capacity 850 l Press dimensions built up 8,000 x 1,600 x 2,500 mm (l x w x h) Transport weight press approx. 9.5 t Accessories: Oil cooler 1.5 kW, oil tank heater 1.5 kW, press box made of wear-resistant steel S355 Material properties: According to the manufacturer, this machine is suitable for pressing tin  ...

HOLTEC HFT 21 packet cutting drip saw automatic feed – year of manufacture 1986 – German production – electric roller feed Technical parameters: - engine power 11 kW - guide length 1700 mm - package width 1300 mm - package height 1300 mm - cutting length max 4500 mm - roll width 1300 mm - spacing between rolls 900 mm - roll diameter 160 mm - height of rollers from the base 730 mm - total length 9400 mm Transport dimensions 650 x 200 x 256 cm weight 2000 kg

Machine Details Stock-No. 1105-03789 Type of machine Machining Center - Vertical Make CINCINNATI Type sabre 1250 Year of manufacture 1995 Type of control CNC Storage location HAGUENAU Country of origin UK Delivery time immediatly Freight basis FOT Technical details X-Travel 1270 mm Y-Travel 762 mm Z-Travel 820 mm spindle 11 kW spindle turning speed range 60-8,000 rpm toolpiece magazine: chain magazine 21 pieces tool taper DIN 69871 ISO 40 table-size 1,370 x 760 mm control fanuc om total power requirement 30 kVA weight of the machine approx. 9 t Additional information FANUC OM Technical details and information subject to amendments and errors.

Cooling capacity: 84 kW (12/7 — 35°C) Heating capacity: 100 kW (40/45 — 7°C) Year of manufacture: 2013 Options: Heat pump Heat exchanger: Plate Hydraulic module: pump, differential relay Refrigerant circuit: 1 pcs. Compressors: 2 pcs. Copeland(scroll) Type of refrigerant: R410A Number of fans: 2 pcs. Weight: 970 kg. Dimensions: 3.25 x 1.10 x 1.80 m. Working hours: 6060/2217 h. Condition: good Product quantity: 1 pcs.

Cooling capacity: 412 kW(12/7 — 35°C) Year of manufacture: 2009 Options: with economizer Heat exchanger: Plate Refrigerant circuit: 1 pc. Compressors: 2 pcs. Hitachi (screw) Number of fans: 12 pcs. Type of refrigerant: R407C Dimensions: 5.37 x 1.90 x 2.42 m. Weight: 3550 kg. Condition: Very good Product quantity: 1 pc.

Vacuum well point dewatering filters, In 50mm and 60mm div length sizes., , = More information =, , Year of construction: 2022, , = More information =, , Year of manufacture: 2021, Colour: Yellow, Technical condition: very good, Visual appearance: very good, Damages: none, , = Dealer information =, , Aroused your interest? . The sales team will be happy to answer any questions you may have. CALL or EMAIL us, we are here for you! We would like to be your supplier ! Also for spare parts, pipes, hoses , coupling systems and fittings. A physical visit to our location is very well possible! Make your visit known in advance to avoid disappointment. Visit : from Monday to Friday from 08.00 to 17.00 on Saturdays or in the evenings by appointment.; Accessories: NL: Direct inzetbaar, NIEUW en ONGEBRUIKT!, op voorraad!, PUMPED UP AND READY TO FLOW!, , EN: Can be used immediately, in stock!, NEW and ...

Machine Details Stock-No. 1105-037894 Type of machine milling machining centers - vertical Make HURON Type CX 10 Year of manufacture 2001 Type of control CNC Storage location FRANCE Country of origin france Delivery time immediately Freight basis EX WORK Technical details X-Travel 1050 mm Y-Travel 510 mm Z-Travel 510 mm total power requirement 9 kW Additional information CNC HEIDENHAIN TNC 426 CHIP CONVOYEUR VERY NICE MACHINE 8000 RPM 20 TOOLS MAGASIN ISO 40

Mobile pump set built on an open skid. The pump is powered by a reliable hand-started Hatz 1D81Z diesel engine., Max yield : 51 m3/h, Max head : 30 MWK, , If you are interested in this pump, please do not hesitate to contact us., We have 4 pcs. in stock., , Throughput capacity: 51 m3/h, Motor brand: Hatz, Max. head: 30 MWK, Max dirt passag: 3400 rpm, Weight: 200 kg, , = More information =, , Year of manufacture: 2010, Applicable material: Water, Empty weight: 200 kg, Connector size: 3 Bauer, Cargo space capacity: 850 l, Quick coupler system: Yes, Technical condition: very good, Visual appearance: very good, Damages: none, , = Dealer information =, , Aroused your interest? . The sales team will be happy to answer any questions you may have. CALL or EMAIL us, we are here for you! We would like to be your supplier ! Also for spare parts, pipes, hoses , coupling systems and fittings. A physi ...

VTT Pipe racks ideal for storing all types of pipes and tubes., The frame is fully galvanized., If you have any question dont hesitate to ask them., , = More information =, , Year of manufacture: 2021, Colour: Grey, Technical condition: very good, Visual appearance: very good, Damages: none, , = Dealer information =, , Aroused your interest? . The sales team will be happy to answer any questions you may have. CALL or EMAIL us, we are here for you! We would like to be your supplier ! Also for spare parts, pipes, hoses , coupling systems and fittings. A physical visit to our location is very well possible! Make your visit known in advance to avoid disappointment. Visit : from Monday to Friday from 08.00 to 17.00 on Saturdays or in the evenings by appointment.

Year of manufacture: 2022, Connector size: 4 Cardan, Technical condition: very good, Visual appearance: very good, Damages: none, , = Dealer information =, , Aroused your interest? . The sales team will be happy to answer any questions you may have. CALL or EMAIL us, we are here for you! We would like to be your supplier ! Also for spare parts, pipes, hoses , coupling systems and fittings. A physical visit to our location is very well possible! Make your visit known in advance to avoid disappointment. Visit : from Monday to Friday from 08.00 to 17.00 on Saturdays or in the evenings by appointment.

Cooling capacity: 200 kW (12/7 — 35°C) Year of manufacture: 2011 Refrigerant circuit: 2 pcs. Number of fans: 4 pcs. Type of refrigerant: R410A Compressors: 3 pcs. Danfoss (scroll) Heat exchanger: Plate Dimensions: 2.40 x 2.25 x 2.30 м. Weight: 1547 кг. Working hours: 1050/5140/3690 h. Condition: Excellent, new condenser

Hot-dip galvanized stacking frame for the installation of a water pump or aggregate., , If you are interested, please do not hesitate to contact us for a quote., , = More information =, , Year of manufacture: 2018, Applicable material: Water, Empty weight: 75 kg, Technical condition: good, Visual appearance: good, Damages: none, Please contact John van Tongeren (+31620537017) for more information, , = Dealer information =, , Aroused your interest? . The sales team will be happy to answer any questions you may have. CALL or EMAIL us, we are here for you! We would like to be your supplier ! Also for spare parts, pipes, hoses , coupling systems and fittings. A physical visit to our location is very well possible! Make your visit known in advance to avoid disappointment. Visit : from Monday to Friday from 08.00 to 17.00 on Saturdays or in the evenings by appointment.; Accessories: NL: Direct ...

turning speed range: 3000 U/min tool adaptor: ISO 40 / 50 drive motor: 11 kW distance spindle - column: 316 mm Tool bore: DIN 69871 Technical specifications • Bodies arranged at 45° with respect to each other. • Maximum transmissible torque from 550 Nm to 3.180 Nm. • Maximum speed from 1.800 rpm to 3.000 rpm. • Automatic clamping of the tool, driven by a hydro-mechanical system. • Standard tool taper DIN-2080 / 69871 and pull stud DIN-69872 (possibility to manufacture for other types). • Spindles and gears are made of case-hardened and tempered chrome-nickel. • High-precision angular contact ball bearings. Optionally • Cooling of bearings of the spindle, maximum speed up to 4.000 rpm (only for VAR-3 and VAR-5 head models). • External tool cooling. • Internal tool cooling, type AD, with rotary joint. • Air jet for cleaning the tool tapper. The data for  ...

Cooling capacity: 140 kW (12/7 — 35°C) Year of manufacture: 2012 Refrigerant circuit: 2 pcs. Number of fans: 2 pcs. Type of refrigerant: R410A Compressors: 2 pcs. Bitzer (scroll) Heat exchanger: Plate Dimensions: 2.72 x 1.40 x 2.42 m. Weight: 1260 kg. Working hours: 17996/12549 h. Condition: Good

Cooling capacity: 37 kW (12/7 — 35°C) Year of manufacture: 2014 Refrigerant circuit: 2 pcs. Compressors: 2 pcs. Danfoss (scroll) Type of refrigerant: R-407C Heat exchanger: Plate Number of fans: 2 pcs. Hydraulic module: water pump, buffer tank, expansion vessel Dimensions: 2.20 х 1.05 х 1.73 m. Weight: 740 kg. Working hours: 7750/1760 h. Condition: Good

machine measurements: -- mm machine weight: 1.500 kg power capacity: 30 kW Condition: used, Specification: shredder/Shredding plant with two shredders type: WLK 6 S / 30 V-rotor Weima low and slow speed rotor, and second shredder make: AMIS complete plant ready for operation, incl. hopper with lid and platform. Special accessories: - automatic star-delta start-up - gear motor with transport screw - lid with limit switch - quick-change sieve - Hopper can be lifted manually - Equipment for underfloor installation consisting of hopper elevation, guard rail, external emergency stop WLK version with sound insulation, sound-insulated lid and front door Technical data: - Hopper volume: 0.9 m³ - Operating voltage: 3x 400 V - Motor power main drive: 30 kW, 1,500 rpm - Motor power hydraulics: 1.5 / 2.0 kW, 1,500/3,000 rpm - Weight approx.: 1,500 kg ...

Cooling capacity: 194 kW (35°C evap. 7°C) Year of manufacture: 2005 Type of refrigerant: R407С Refrigerant circuit: 2 pcs. Compressors: 4 pcs. Danfoss (scroll) Version: Low Noise Number of fans: 3 pcs. Weight: 1474 kg. Condition: Excellent

Key data: 150

two-component machine year of manufacture 1995, closing force 150 T, control MC 3, plasticizing unit 1 - screw diameter 40mm, molded weight 183g, plasticizing unit 2-screw diameter 30mm, molding weight 85g

Key data: 120

Extruder 1 spindle for manufacture of pellets. 120 mm Ø, 35 L/D, brand name: FBM ( Falzoni), type: ETF 120 V 380/5L, year: 1988. Engine: 200 KW. Degasifier and filter changer. Head cut under water, year: 2006, brand: PRT and force-feeding silo.

Key data: 1000 , 610 , 610

Machine Details Stock-No. 1105-03805 Type of machine Machining Center - Vertical Make BRIDGEPORT Type HR 1000 Year of manufacture 2011 Type of control CNC Storage location HAGUENAU FRANCE Country of origin Taiwan Delivery time immediately Freight basis ex stock HAGUENAU FRANCE Technical details X-Travel 1000 mm Y-Travel 610 mm Z-Travel 610 mm control CNC FANUC OIMC Table surface area 1150 x 540 mm Rapid traverse 30/30/30 m/min turning speed range 12000 rpm power capacity - milling spindle 13 kW No. of tools in the magazine 30 pieces tool taper BT 40 Additional information CNC FANUC OIMC - Synchronised tappin - boxway system 3 axis - RS-232 interface mm)

BBA ( Cornell )5RB-F16 NEW and UNUSED driven by a DEUTZ BF4M2012C(2007) with 5700 workinghours, Machine is fully serviced and checked by manufacturer.( BBA), Electrical part is completely renewed, Pump is new and unused, Is offered with 8 DN200 suction hose with strainer., Motor is built in a soundproof housing., Vacuum pump is a BBA MP50, , Machine is ready for immediate use and in stock!, , Throughput capacity: 600 m3/h, Max dirt passage: 35 mm, Motor brand: DEUTZ BF4M2012C, Max. head: 110 MWK, Max dirt passag: 2300 rpm, , = More information =, , Year of manufacture: 2022, Applicable material: Water, Empty weight: 4.750 kg, Connector size: 8 inch, Technical condition: very good, Visual appearance: very good, Damages: none, Please contact Gert-Jan Kruitbosch (+31648061001, sales@vantongerentrading.nl) or John van Tongeren (+31620537017) for more information, , = Dealer information =, ,  ...

FUJI KING DEBARKERS CAPACITY 200t/h ( one double section 60 t/h) USED EQUIPMENT, DISASSEMBLED, WASHED, LOADED ON TRUCKS AND CONSOLIDATED IN CONTAINER. MODEL KD6/50DT (EACH DEBARKER) YEAR OF MANUFACTURE 1995 TECHNICAL SPECIFICATIONS OF EACH EQUIPMENT: • TWO (2) DOUBLE ROTOR SECTIONS EACH. • SECTION LENGTH OF 7.65 mt (25') • TOTAL LENGTH OF 15.3 mt (50´) • WIDTH OF THE INTERIOR COMPARTMENT OF PIECES OF 2.4 mt. • MAIN ROTORS DIAMETER 0.9 mt. (36”) x LENGTH 7 m (23’) • POWER SYSTEM: 2 ENGINES 575 V 60 Hz 100 HP CONNECTED TO THE REDUCER MOTOR AND DRIVING THROUGH CHAIN. • VARIABLE SPEED FROM 16 TO 50 RPM. • DISCHARGE DRIVEN BY VERTICAL CHAIN AND MOTOR 575 V 60Hz 3HP • NET WEIGHT: 42 TONS PER SECTION - 2 SECTIONS 84 tons TOTAL. EACH KIT DOES INCLUDES: ❖ WAIST BARK BELT CONVEYOR ❖ FEED ROLLERS ❖ SUBSTRUCTURE FOR SUPPORTING FOUNDATIONS, CONSI ...

• Size of the vacuum plate = 90 x 134cm • Useful printing size= 70 x 100cm ( according manufactures instruction book ) • Outside frame size max: 94.5 x 145cm • The frame which are coming with the machine / aluminum frames, useful printing size= 84 x 132cm • In the attachment the complete instruction book from La Meccanica We can offer you following machine (Subject to being unsold ) Terms of delivery/payment: payable before/ by order . All information and offers are subject to our general terms & conditions If there are further questions, don't hesitate to contact us. Screen printing machine PANT 70-100 manufacture LA Meccanica Italy year 03/2006 S/N 114 Printing size max: 70 x 100cm Vacuum Plane: Anodized Aluminum with a squeegee guide bar for the printing color counter weight to hold the frame with the screen easily 380V/50T, 0.37kW vacuum motor  ...

Four-sided planer WEINIG PROFIMAT 22N. No 4 –DTR – German production – year of manufacture 1988 – adjustable heads TECHNICAL PARAMETERS: planing width 220 mm planing height 120 mm spindle diameter 40 mm 1) bottom head 5.5 kW 2) head of the law 3) left head 7.5 kW 4) top head 7.5 kW feed engine 2.2 kW feed speed 6 – 20 m/min four steel top pulling rollers one upper rubber pulling roller one pulling roller in the countertop feed on cardan shafts electric height adjustment pre-table top length 1975 mm central lubrication pneumatic clamps dimensions of the machine (length / width / height) 350 / 200 / 170 cm weight ~ 1800 kg

Key data: 300 mm, 500 mm, 4000 1/min

Machine Details Stock-No. 1105-04001 Type of machine CNC Lathe - Inclined Bed Type Make HARDINGE Type CONQUEST T 51 Year of manufacture 1997 Type of control CNC Storage location HAGUENAU FRANCE Country of origin UK Delivery time Immediatly Freight basis ex warehouse, loaded Technical details turning diameter 300 mm turning length 500 mm control fanuc 18 T max. swing diameter 400 mm spindle head A 2-5 Bar Material Dia. 51 mm turning speed range 4000 rpm spindle drive 11/15 kW Torque 168 Nm Tool Diameter 32 mm Rapid traverse 30 m/min total power requirement 15 kW weight of the machine approx. 3.2 t dimensions of the machine approx. 2.0 x 1.7 x 1.8 m Accessories cooling attachment Additional information FANUC 18T CONTROL 3 JAWE CHUCK + taistock CHIP CONVOYER

2 x 2.8MW 50Hz 133Hrs DO NIIGATA 12V26HX Power Plant We are offering a nice and urgent sale of 2 sets of NIIGATA 12V26HX generating set with very short 133 running hours because they had been used as emergency backup ones. Both engine and generator had been kept very clean and in excellent condition. The scope of supply includes 2 diesel generating sets, 2 control units, 1 duplication oil supply unit, 1 air compressor, 2 heat exchangers and all the items were dismantled, packaged and have been stored at warehouse in Japan and are ready for buyer’s immediate inspection and delivery. Main Specifications Maker NIIGATA Model 12V26HX Quantity 2 sets Year of Manufacture 2003 Output 2,800kWe Speed 1000rpm Bore 260mm Fuel Oil Diesel Oil Running Hours only 133 hours (used only emergency backup )

REF-2495 FAM FLEXIFAM SLICER-DICER The FAM Flexifam is a cutting machine suitable for cutting into slices, strips and dices. Mainly made of stainless steel with the exception of some pieces of the drive. The chassis, the lamination of the plaques, the feed hopper and the outfeed hopper are completed with glass microspheres. The three-dimensional cutting operation ensures the perfect uniformity of the product. Brand: FAM Model: Flexifam Machine no.: 6700/2007 Year of manufacture: 2007 Three-phase. 400 V. 50 Hz. 20 A 5.5 kW/7.48 HP Throughput: 2,000 kg/h Dimensions: width 1,747 mm; length 1,066 mm; height 1,555 mm Weight: 550 kg Complete with one cutting head: 3 mm dices or 8 mm dices (choose one)

drive motor: 7,4 kW tool adaptor: ISO 40 turning speed range: 1800 U/min Torque: 400 Nm Technical specifications Bodies arranged at 45° with respect to each other. Maximum transmissible torque from 550 Nm to 3.180 Nm. Maximum speed from 1.800 rpm to 3.000 rpm. Automatic clamping of the tool, driven by a hydro-mechanical system. Standard tool taper DIN-2080 / 69871 and pull stud DIN-69872 (possibility to manufacture for other types). Spindles and gears are made of case-hardened and tempered chrome-nickel. High-precision angular contact ball bearings. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Type: APE 250. Band saw blade pneumatic strip shears. Strip width up to: 250 [mm]. For straight rectangular and burr-free cutting off the bandsaw blades. Pneumatically operated for double cutting (two shear knives). Year of manufacture: 2016. On stock more Ideal BAS flash butt welding machines and automatic punching presses Bruderer, Mabu, Schaal, Bihler and more.

BBA MP 50 Vacuum pump this MP series pump with air treatment capacities of 50 m3/h. He is, designed with a clear focus on reliability, efficiency and durability., Pump specifications:, Type.MP50 Diaphragm pump, max. air capacity.100 m3, /h (59 CFM), max. vacuum..8.5 m (29 inHg), Diaphragm/valves...Rubber, , Throughput capacity: 100 m3/h, , = More information =, , Year of manufacture: 2023, Applicable material: Water, Cargo space capacity: 1.667 l, Technical condition: very good, Visual appearance: very good, Damages: none, , = Dealer information =, , Aroused your interest? . The sales team will be happy to answer any questions you may have. CALL or EMAIL us, we are here for you! We would like to be your supplier ! Also for spare parts, pipes, hoses , coupling systems and fittings. A physical visit to our location is very well possible! Make your visit known in advance to avoid disappoint ...

Baler Austropresses, type APK E55-1400, year of manufacture 2016, with free-baling device Manufacturer: Austropressen Type: APK E-55-1400 Year of construction: 2016 Propulsion: 2 x 22 KW Press force: 55 t Filling opening: 1400 x 1020 mm (LxW) Binding: 5-fold, automatic Throughput at 35 kg/cbm: 7.5 t/h 60 kg/cbm: 13.2 t/h Bale weight: 450- 550 kg Bale dimensions: 1100 x 750 x max. 1600 mm Machine dimensions: 8850 x 2700 x 3400 mm (LxWxH) Machine weight: approx. 14,100 kg Drive 2x22kW for maximum energy efficiency. With low material loading, the machine works with only 22kW drive. Only when the filling quantity is increased is the full drive activated in order to achieve the required throughput capacity. Materials: paper, cardboard, foil, plastic, PET bottles, fibers, etc. Please note: All technical data refer to the manufacturer's specifications. We assume no li ...

UK Power Generators Ltd is selling the Caterpillar G3516B with 1.1 MW and 2004 is the year of manufactured. This is a containerized package, with the following specification details: Machine Model G3516B Year of Manufacture 2004 Power Output 1100 kw Fuel Gas Condition Used RPM 1500 RPM Frequency 50 Hz Voltage 400 V Location United Kingdom Containerized Complete Containerized Package If you are looking for a great reliable source of energy to enhance your business, production and lighting people homes with affordability. Choose us, for your energy needs to be sorted. The container has very high specs, and the transformer is included in the containerized package. The transformer is Step up 400-11000 V. Contact us with your company details and further information at: Infoukpowergeneratorsltd

Year of manufacture/SO/GO: -/-/2024 Description: Machine in good technical condition, after agreement possibility of testing.Lathe after complete overhaul.

Key data: 530 mm, 500 mm, 4000 1/min

Machine Details Stock-No. 1105-04005 Type of machine CNC Lathe Make COLCHESTER Type TORNADO 300 Year of manufacture 1995 Type of control CNC Storage location HAGUENAU FRANCE Country of origin Great Britain Delivery time immediately Freight basis EX WORK Price Technical details turning diameter 530 mm turning length 500 mm control FANUC OT total power requirement 22 kW weight of the machine approx. 3.3 t Additional information GOOD MACHINE CNC CONTROL FANUC OT Cuck Taikstock VDI 40 Turret 12 P Chip Convoyer echnical information Swing over bed 530 mm Swing over cross-slide 330 mm Distance centre tot centre 500 mm Max longitudinal travel Z-axis 20 m/min Max cross travel X-axis 10 m/min Spindle cone A2-8 Dia of spindle bore 90.5 mm Power on the spindle 22 kW Number of speeds 4000 rpm Command Fanuc Total power needed 53 kVa Length 3500 mm Wid ...

Technical data paper shredder: Manufacturer Bollegraaf Type HBS 110 - 1500 Year of manufacture 1994 Drive power 110 kW Throughput approx. 25 t/hour Dimensions of feed hopper 1,970 x 2,000 mm Dimensions of built-up machine 3,160 x 4,400 x 3,980 mm (L x W x H) Weight approx. 11.5 t Special features: The drive unit is equipped with a hydraulic fluid coupling that minimises current peaks during start-up and operation. The rotor is mounted on oversized roller bearings and equipped with replaceable hammers that are extremely wear-resistant. Range of applications: The shredder was used to shred paper, cardboard, newspapers, magazines, books, etc. in order to achieve optimum compaction and dimensional stability of the bales in the downstream baling press. Condition of the shredder: The shredder is in good working condition and will be dismantled at the end of April. Scope of delivery: Shredder ...

Thermo Scientific Apex 500 metal detector (450x260mm)-Ref.8746 Width: 850 mm Height: 1400 mm Length: 2260 mm Brand: Thermo Scientific Model: Apex 500 Manufacture year: 2018 The Thermo Scientific Apex 500 metal detector offers unprecedented sensitivity allowing you to comply with your legal obligations and protect your brand. It features an innovative touch screen that streamlines installation and optimizes configuration with minimal training, thus reducing downtime in production. Clearance dimensions - Width: 450 mm - Height: 260 mm Conveyor width: 400 mm

Technical data of the bale opener line: Manufacturer Cross Wrap Oy Ltd, Siilinjärvi, Finland Type BO 4000 Year of manufacture 2015 Quantity of opened bales 674 pieces Operating time only 3 days, exclusively by running in the entire line during new installation Opening time approx. 45 seconds per bale Bale dimensions (W x H x L) 1100 x 1100 x 1400 - 1900 mm Max. Bale weight 2,000 kg Conveying height of the system 1,400 mm Max. Conveying width of the system 1,200 mm Material to be opened RDF/MSW Availability of the line 98% Noise level of the bale opener line 85 dB(A) Total connected load 37 kW Rated current 125 A Operating display SIEMENS SIMATIC HMI Touch Control SIEMENS S7 ET200S Installation dimensions 8,463 x 2,890 x 3,960 mm (l x w x h) Scope of delivery: Feed conveyor 3,500 x 1,200 x 1,400 mm Feed conveyor to opener 1,500 x 1,200 x 1,400 mm Bale opener (gripper with knife) Special  ...

Technical data bale opener and dewiring line with weighing system Bale feeding belt, pos. 1: Belt length 11,000 mm Width between side parts 1,460 mm Belt width 1,200 mm Max. Load 7,000 kg Conveying speed 0.2 m/second Drive power 3 kW Pitch of idlers 250 mm Side wall height in feed area 70 mm Side wall height impact wall 1,000 mm Feed height 1,800 mm Industrial weighing system for the bale feeding belt (additional equipment): Weighing terminal type IT1 Ethernet 8 pieces of calibratable load cells with wishbones and a nominal load of 2,200 kg/each Preload of the system 5,000 kg Feed belt to bale opener and dewirer, pos. 2: Belt length 9,500 mm Width between side parts 1,460 mm Belt width 1,200 mm Max. Load 6,000 kg Conveying speed 0.25 m/second Drive power 9 kW Pitch of idlers 250 mm Side wall height 800 mm Pitch 13 Bale opener and dewiring station, pos. 3: Type B/E 3213 Year of manufactur ...

Machine Details Stock-No. 1105-03826 Type of machine CNC Lathe Make HARDINGE Type CONQUEST 42 Year of manufacture 1992 Type of control CNC Storage location FRANCE Country of origin USA Delivery time by arrangement from location Freight basis from location, uninsured Price Technical details turning diameter 264 turning length 353 mm control FANUC 18 TB turning diameter over slide 284 mm turning speeds 500 rpm Rapid traverse 20 m/min power capacity 15 kW Number of tools 12 pcs. Tail Stock Progr. Barrel Additional information GOOD MACHINE FANUC CONTROL 3 AXIS MMACHINE WITH LIVE TOOLS TAILSTOCK

Machine Details Stock-No. 1105-03827 Type of machine Machining Center - Vertical Make CINCINNATI Type ARROW 750 Year of manufacture 1997 Type of control CNC Storage location HAGUENAU FRANCE Country of origin Great Britain Delivery time immediately Freight basis EX WORKS Technical details X-Travel 762 mm Y-Travel 380 mm Z-Travel 510 mm Table-size 865 x 510 mm spindle taper ISO 40 spindle turning speed range 60 - 8000 rpm Rapid traverse 24 m/min spindle drive motor 9 kW Tool Change Unit 21 fold CNC-control HEIDENHAIN TNC 426 voltage 380 V table load 750 kg Throat 550 mm coolant yes total power requirement 30 kVA weight of the machine approx. 4.3 t Additional information - control: HEIDENHAIN TNC 426 - Coolant Equipment - machine lamp Lot Off Tools

Model: KFL Cooling capacity: 10-57 kW Year of manufacture: 2019 Tube volume: 13-75 dm³ Number of fans: 1-4 pcs. Distance between lamellas: 6-11 mm Coolling capacity: 13 520 m³/h Product quantity: 34 pcs. Condition: Excellent — KCGL504 (5 pcs.) 30 kw (-8°C) — KCEH454 (3 pcs.) 26 kw (Freon R404A) (-10°C) — KDGH503 (5 pcs.) 57 kW (5°C) — KCGH452 (3 pcs.) 26 kW (20°C) (5°C) — KDGL451 (10 pcs.) 10 kW (5°C) — KCGL632 (2 pcs.) 31 kW (-8°C)

faceplate diameter: 3200 mm swing diameter: 3500 mm turning height: 2200 mm range L-W-H: 7730 x 6240 x 6700 mm control: Typ 840 D sl voltage: 3 x 400 V frequency: 50 Hz turning speeds: 0,8 - 40 U/min max. turning diameter: 3500 mm total power requirement: 51 kW weight of the machine ca.: 86 t Technical specifications Machine type: CNC vertical lathe Manufacturer: Rafamet Year of manufacture: 1973 conventional General overhaul with control retrofit 2010 Control upgrade 2016 Control: Siemens 840 D Sl Condition: very good faceplate Turning diameter of the faceplate 3,200 mm Number of rotation stages of the face plate 3 (infinitely variable) Speed ranges of the faceplate 0.8 - 40 rpm Level I 0.8 – 3 rpm Level II 0.8 - 11 rpm Level III 0.8 – 40 rpm processing of workpieces Max. turning diameter 3,500 mm Max. turning height of the workpieces above the faceplate 2,200 mm vertical supports S ...

approx. 82 pieces of corlettes in 3 sizes plus upholstered trolley - used - : Prices (net) per piece ex location: Type 1 (1,30m): 89.- € Type 2 (2,40m): 139.- € Type 3 (3m): 139.- € Type 4 – Upholstered trolley: 39.- € We reserve the right to a minimum purchase quantity, primarily complete sale of the individual sizes! Manufacturer: Cordes Type: unknown Year of manufacture: unknown Foldable Not stackable Type: 1 – 1.30m Width: 1.30m Depth: 1.15m Height: 1.60m Quantity: 32 pieces Type 2 – 2.40m Width: 1.30m Depth: 1.15m Height: 1.60m Quantity: 40 pieces Type 3 – 3m Width: 3m Depth: 1.15m Quantity: 10 pieces Type 4 - Upholstered trolley Length: 2.35m The first folding level is on 33 cm with a width of 60 cm and the second level is on 133cm with a support surface of 40 cm. Quantity: 18 pieces Available: now Condition: good  ...

UK Power Generators Ltd, have pleasure to present gas unit by Caterpillar G3516A for sale. Attached are the pictures for the genset, containerised package Machine Model Caterpillar G3516A Year of Manufacture 2000 Rated Output Power 1030 kw Fuel Gas Condition Used Speed 1500 RPM Frequency 50Hz Voltage 400 volts Location United Kingdom The containerised package is a complete plug and play unit. All life maintained by manufacturer approved service provider and available on request. Fully major overhauled been completed just now. Great For site visit, pricing and booking information, feel free to contact us at: Infoukpowergeneratorsltd ~ UK Power Generators Ltd

Used roll packer Manufacturer: Bergmann Type: RP 7801-69 Year of manufacture: unknown specifications: Weight: 3,100 kg Power: 5.5 kW, 12.5 A Pmax.: 220 bar Noise level: 69 dB(A) The hydraulic motor has recently been renewed. Technical description: The rolling roller for compaction of waste and garbage is an invention from BERGMANN. For 30 years, this technology has been in continuous use worldwide – at recycling centres, in wholesale markets, industrial plants and elsewhere. Clean, highly efficient and extremely low-maintenance! The principle is simple: a heavy-duty compaction roller with hydraulic self-propulsion is guided over an articulated mast in the container and captures, tears and compacts the Einfüllgut.Im dialogue with its customers, BERGMANN has repeatedly expanded its machine family of roll packers: from roll packers, which have its fixed  ...

Machine Details Stock-No. 1105-03834 Type of machine Cold Circular Saw Make MEP Type TIGER 350 Year of manufacture 1996 Type of control conventional Storage location HAGUENAU Country of origin Germany Delivery time immediately Freight base free truck Technical details saw blade diameter 350 mm Cutting diameter 250 mm stroke 170 mm Capacity 90 degrees: flat 235 X 70 mm capacity 45 degrees: flat 85 X 70 mm Cutting Speed 26/ 52 m/min total power requirement 3 kW weight of the machine approx. 700 KG Additional information VERY NICE

Industrial robot Yaskawa GP 25 Year of manufacture: 2019 Number of axes 6 Loading capacity 12 kg Max. Working range 2,010 mm Repeat accuracy 0.03 mm Weight 260 kg Power supply 2 kVA S-axis 210 °/s L-axis 210 °/s U-axis 220 °/s R-axis 435 °/s B-axis 435 °/s T-axis 700 °/s Mounting options ceiling, wall, floor Very good condition!