We use cookies to optimize our website for you and to be able to continuously improve it. By continuing to browse the site you are agreeing to our use of cookies.
Disagree
121,997 used machines on RESALE, but how to find them? Machine Search
maximum number of results exceeded > 1000
please refine your search
new
angular steel - leg outwards: -- mm double T-iron on the x-axis: -- mm U-iron on the x-axis: -- mm : 50 mm : 150 mm throat: 120 mm total power requirement: 1,5 kW weight of the machine ca.: 0,36 t dimensions of the machine ca.: 1,1 x 0,8 x 1,4 m The PB 50-3 is a profile bending machine with manual adjustment of the top roller via a handwheel. The profile bending machine can be used in vertical and horizontal working position and are equipped with three driven rollers. The change between two or three driven rollers is done simply by the side handle of the machine. - Manual adjustment of the top roller with a handwheel - Vertical and horizontal work possibility - 3 driven rollers - Supplied with a standard roller set - Foot pedal The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
new
cutting diameter: 300 mm saw band length: 3320 mm table height: -- mm : 330 mm : 40 / 80 m/min : 3440 x 27 x 0,9 mm : 280 mm : 260 mm : 380 x 260 mm : li 260 mm : li 250 mm : li 300 x 200 mm : re 200 mm : re 180 mm : re 230 x 160 mm : 180 mm : 170 mm : 200 x 170 mm : 870 mm : 1,5/1,8 kW : 0,7 t total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m Control modes: -Manual mode -Semi-automatic-dynamic operation (the semi-automatic cut is started by manually approaching the saw bow from any position by actuating the hand switch) -Semi-automatic operation (start / stop position of the saw bow is programmed via the keyboard, vice closes / opens automatically, saw bow is automatically returned to the start of the cut) Features: -Stable, torsion-resistant and low-vibration saw frame made of cast steel - Carbide band guides for maximum cutting precision -Large ...
new
cutting diameter: 300 mm saw band length: 3650 mm cutting width: 330 mm capacity 90 degrees: round: 300 mm capacity 90 degrees: square: 260 mm capacity 90 degrees: flat: 330 x 260 mm capacity 45 degrees: round: L 260 mm capacity 45 degrees: square: L 250 mm capacity 90 degrees: flat: L 270 x 200 mm capacity 60 degrees: round: 180 mm capacity 60 degrees: square: 170 mm capacity 60 degrees: flat: 170 x 170 mm capacity 45 degrees: round: R 200 mm capacity 45 degrees: square: R 180 mm capacity 45 degrees: flat: R 200 x 160 mm saw band length: 3650 x 27 x 0,9 mm cutting speed: 40 / 80 m/min total power requirement: 1,5 / 1,8 kW weight of the machine ca.: 0,640 t dimensions of the machine ca.: 1,2 x 1,7 x 1,7 m Powerful miter band saw for cuts from 45 ° right to 60 ° Left CCS (CutControlSystem) for automatic cutting. (Stepless regulation of the Feed and shutdown at the end of the cut) New ve ...
new
cutting diameter: 180 mm saw band length: 2130 mm cutting width: 200 mm dimensions of saw-band: 2130 x 20 x 0,9 mm : 200 mm band speed: 40/80 m/min capacity 90 degrees: round: 180 mm capacity 90 degrees: square: 180 mm capacity 90 degrees: flat: 200 x 150 mm capacity 45 degrees: round: 115 mm capacity 45 degrees: flat: 125 x 110 mm capacity 45 degrees: square: 110 mm capacity 60 degrees: round: 70 mm capacity 60 degrees: flat: 70 x 70 mm capacity 60 degrees: square: 70 mm total power requirement: 0,7 / 0,81 kW weight of the machine ca.: 0,2 t dimensions of the machine ca.: 1,4 x 0,9 x 1,6 m Compact, powerful workshop miter band saw machine for cuts from 0 ° to 60 ° left Automatic cut (HB) and manual cut Description: -Manual cutting cycle and automatic cutting -AUTOMATIC CUT: (via selector switch) with stepless settings of the Lowering speed and adjustment of the cutting pressure via co ...
used
sheet width: 2000 mm plate thickness: 8,0 mm max. plate thickness: 8,0 mm anbiegen roll diam. toproll: 240 mm roll diam. bottom roll: 240 mm side roll diameter: 240 mm work height max.: ca. 1100 mm work speed: 6,5 m/min voltage: 400 V total power requirement: 11,0 kW weight: 4910 kg range L-W-H: 4000 x 1300 x 1600 mm Furnishing: - robust 3-roller bending machine with asymmetrical roller arrangement - free-moving operation - analogue position display for rollers (scale) - Fixed top roller - manual infeed of the bottom roller, using handwheels with scales - electrically adjustable side roller An inclined position is possible by pushing out a coupling Inclination for bending tapered tubes Adjustment takes place via a geared motor - driven upper and lower roller Side roller runs as a drag roller - original instruction manual + machine card The data for this ad was created with ModulMW ...
used
sheet width: 2000 mm plate thickness: 8,00 mm max. plate thickness: 8,00 mm anbiegen roll diam. toproll: 240 mm roll diam. bottom roll: 240 mm side roll diameter: 240 mm work height max.: ca. 1100 mm work speed: 6,5 m/min voltage: 400 V total power requirement: 11,0 kW weight: 4910 kg range L-W-H: 4000 x 1300 x 1600 mm Furnishing: - robust 3-roller bending machine with asymmetrical roller arrangement - free-moving operation - analogue position display for rollers (scale) - Fixed top roller - manual infeed of the bottom roller, using handwheels with scales - electrically adjustable side roller An inclined position is possible by pushing out a coupling Inclination for bending tapered tubes Adjustment takes place via a geared motor - driven upper and lower roller Side roller runs as a drag roller - original instruction manual + machine card The data for this ad was created with Modul ...
used
Labelling machine NEWTEC 4T 2S 2E + SL Year 2010 (never worked) Counterclockwise direction Speed: 2.500 bph N°2 adhesive station to apply front and back labels NEW N°1 cold glue station to apply L” seal Manual adjustment height heads Manual regulation glue Speed adjustment by inverter Clamps to iron L” seal N°1 glue pump Safety protections
used
sheet width: 1050 mm plate thickness: 3,0 mm ST cutting angle: 2,0 ° stroke max.: 38 p. Min. total power requirement: 5,5 kW weight of the machine ca.: 1690 kg. range L-W-H: 1800 x 1800 x 1250 mm from a maintenance workshop () Furnishing: - Motorized / electric guillotine shears - manual backgauge, adjustment by hand crank Travel range max. 700 mm with analogue position display (scale) manual adjustment from behind - rear protection - rear sheet metal slide - free-moving footswitch The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
new
: neu : ca. 4-6 Monate ab Auftrag : Türkei : 11900 € : 242.76 € : 3660x27x0,9 mm : 20-100 m/min : 320 mm : 300 mm : 320x300 mm : 640 mm : 0.12 kW : 0.37 kW : 2,2 kW : 1900 mm : 850 mm : 1300 mm : 770 kg Roller material feed with manual adjustable length stop with limit switch blade brush control panel height adjustment bar with limit switch hydromechanical blade tension inverter hydraulic vice coolant pump saw blade security switch 1,2 meter roller table users manual in GERMAN or ENGLISCH The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
used
Old Lodige KM 1200 D continuous mixer with ploughshares (year 1977) transformed into a mixer-dryer (year 2017) by the previous user. Modification made : New enclosure / mixing chamber in stainless steel 316. Change of motor transmission: belt -> geared motor Main material: 316 stainless steel Year: 2017 Type of drying: hot air blowing Without electrical cabinet With piping 1 - Ploughshare mixer 1200 L Motor manufacturer: SEW Power : 18,5 KW Material: 316 stainless steel + 2 manual butterfly valves + 2 manual Orbinox knife gate valves Porthole interior view Safety box suppression (brand : Vigilex) No manufacturers plate 2 - Fan n?1 Manufacturer: Kiekens Model: 8 KTEN 355 Year : 2017 Volume: 1204 m3 / H Power : 15 KW Temperature : 80?C Atex : yes Ex II 3D/G td nA 3 - Fan n?2 Manufacturer: Kiekens Model : 8 KTEN 28 ...
used
sheet width: 3020 mm plate thickness: 25,00 mm no. of strokes: 4 - 8 Hub/min back stop - adjustable: ca. 1250 mm work height max.: 1040 mm Control: SC 70 cutting angle: 0,5 - 3,0 ° down holder: 18 Stück engine output: 56,0 kW weight of the machine ca.: 38.000 kg range L-W-H: 4200 x 2600 x 2650 mm good condition - ready to use (!) New price ~ 155.000 euros Furnishing: - heavy hydraulic / link-guided guillotine shears - HACO DNC - control model SC 70 200 programs x 127 sets per program Material library max. 32 materials programmable positioning from the backgauge automatic electro-hydraulic cutting gap adjustment automatic electro-hydraulic cutting angle adjustment automatic retraction from the backgauge automatic and manual programming mode Pivoting control panel, front left - electrical cutting length limitation - front finger protection - Ball casters in the table - 1x extra ...
new
No hidden costs with us The advertisement concerns the basic version of the machine. You can get all prices and extras by contacting our technical and sales representatives. We always provide the final amount on quotes if the contract is signed within the valid period. We always quote the cost of shipping from our warehouse in Poland. Hydraulic press brake PBO-1660-CNC OT-41 Specifications - Nominal pressure: 600 kN - Max working length 1600 mm - Throat depth: 200 mm - Max stroke: 100 mm - Daylight: 270 mm - Distance between side frames: 1200 mm - Nominal motor power: 4.0 kW - Length: 2000 mm - Width: 1500 mm - Height: 2100 mm - Weight: 3000.0 kg Tools - Front supports: 2 pcs - Automatic backgauge distance regulation (X-axis): servo motor - Ram control (Y-axis): servo motor - Finger height adjustment (R axis): manual - Type of punch holder: AMADA quick-action ...
new
No hidden costs with us The advertisement concerns the basic version of the machine. You can get all prices and extras by contacting our technical and sales representatives. We always provide the final amount on quotes if the contract is signed within the valid period. We always quote the cost of shipping from our warehouse in Poland. Hydraulic press brake PBO-2580-CNC OT-41 Specifications - Nominal pressure: 800 kN - Max working length 2500 mm - Throat depth: 250 mm - Max stroke: 120 mm - Daylight: 320 mm - Distance between side frames: 1900 mm - Max backgauge distance: 600 mm - Nominal motor power: 5.5 kW - Weight: 4200.0 kg Tools - Front supports: 2 pcs - Automatic backgauge distance regulation (X-axis): servo motor - Ram control (Y-axis): servo motor - Finger height adjustment (R axis): manual - Type of punch holder: AMADA quick-action clamping Otinus CN ...
new
: neu : 2022 : 9631 : prompt, Zwischenverkauf v : Türkei : 5300 € : 109.18 € : 1 : 50 mm : 155 mm : 2 : 1.5 kW : 4,5 m/min : 60x10 mm / 500 mm, 40x10 : 100x15 mm / 450 mm, 60 x : 35x35 mm / 900 mm, 20x20 : Ø 35 mm / 600 mm, Ø 30 mm : Ø 70x2 mm / 1.000 mm, Ø 3 : 70x30x2 mm / 1.200 mm, 50 : 50x50x3 mm / 1.700 mm, 40 : 50x50x5 mm / 800 mm, 40x4 : 50x50x6 mm / 1.000 mm, 30 : 1050 mm : 750 mm : 1450 mm : 390 kg 2 mech. driven rolls strong cast steel construction shafts made of special steel,hardened and ground top roll manual adjustable hardened universal rolls lateral rolls adjustable in 1 axis horizontal and vertical operation double foot pedal forfor- and backward drive machine and equipment accordingto the CE regulations user manual in GERMAN and ENGLISH WE HAVE MORE THAN 210 REFERENCES! The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
new
No hidden costs with us The advertisement concerns the basic version of the machine. You can get all prices and extras by contacting our technical and sales representatives. We always provide the final amount on quotes if the contract is signed within the valid period. We always quote the cost of shipping from our warehouse in Poland. Hydraulic press brake PBO-3212-N Estun E21 Specifications - Nominal pressure: 1250 kN - Max working length 3200 mm - Throat depth: 320 mm - Max stroke: 120 mm - Daylight: 390 mm - Distance between side frames: 2700 mm - Max backgauge distance: 600 mm - Nominal motor power: 7.5 kW - Length: 3700 mm - Width: 1800 mm - Height: 2450 mm - Weight: 7000.0 kg Tools - Front supports: 2 pcs - Automatic backgauge distance regulation (X-axis): electric motor - Ram control (Y-axis): electric motor - Type of punch holder: AMADA quick-action c ...
used
Oscillating shears KÖLLSCHEN type BSK 2000/2 Fabr. No. 69 1307 Year of construction 1969 Cutting length 2000 mm Cutting thickness 2 mm Stand projection 90 mm Working height 920 mm Mains connection 380 Volt, 50 Hz Engine power 4 kW - Drive via gear motor with brake and crankshaft - Mechanical sheet metal hold-down - manual backgauge 500 mm - Stop adjustment via 2 handwheels, rear on the backgauge guide with dimension cala - front side stop left 720 mm- electric foot switch - manual central lubrication - control cabinet on the machine- machine stands on 4 pieces oscillating elements, approx. 100 mm height space requirement L x W x H 2800 x 1700 x 1450 mm weight 2300 kg good condition; used
used
: gebraucht : 2021 : 3965 : prompt, Zwischenverkauf v : Taiwan : 15600 € : 1 : 42 mm : MK 4 : 280 - 1.100 mm : 44 - 1.500 (12) U/min : Stahl: M 25, Guss: M 38 : 1880 mm : 870 mm : 2210 mm : 1800 kg : 470 - 1.270 mm : 0,05 - 0,15 (3) mm/min : 2.2 kW : 260 mm : 280 mm : 1.725 x 715 x 180 mm : 0,75 kW : 635 x 520 x 415 mm : 2530 mm DEMO MACHINE left/right rotation automatic feed drilling depth limit manual headstock adjustment with mechanical clamping electric height adjustment of extension arm and mechanical clamping mechanical clamping of swivel movement of extension arm central operation panel on the front side power load readout for drilling spindle hand wheel for spindle fine feed coolant equipment machine lamp box table machine and equipment according to the CE-regulations operating manual in GERMAN and ENGLISH The data for this ad was created with ModulMWS - the software solution ...
used
grinding diameter max.: 130 mm regulating wheel width: 250 mm max. width of grinding wheel: 250 mm Control: Siemens Sinumerik 3 total power requirement: 35 kW weight of the machine ca.: 6500 kg dimensions of the machine ca.: m max.workpiece length for plunge-cut grinding 250 mm max.workpiece length for throughfeed grinding 300 mm grinding wheel size: diam. x width 600 x 250 mm regulating wheel size: diam. x width 350 x 250 mm grinding speed 35 / 45 / 60 m/sec. regulating wheel speed stfl. 8- 100 rpm (360 rpm) control wheel slide swivels + 2 to - 7° grinding wheel drive 22 kW total drive 35 kW equipped with: - Standard version with double bearing mounted grinding spindle and control spindle. - SIEMENS CNC control type Sinumerik 3 for control of all feeds, speeds and dressing programs. For rapid traverse approach, roughing, finishing, fine finishing and spark out, all feed and time ...
new
: neu : ca. 10 Wochen ab Auftrags : Türkei : 12500 € : 255 € : 1050 mm : 5 mm : 130 mm : 3,5 m/min : 2.2 kW : 2200 mm : 750 mm : 1000 mm : 1200 kg 3 rolls asymmetric rolls - prebending 2 rolls driven by brakemotor manual Back Roll forward tiltable upper roll forward and reverse revs conical bending by tilt of backroll movable control panel users manual in ENGLISH or GERMAN OPTIONS: hardened Rolls€ 1.250,- Motorised Back Roll (Power Rear Roll)€ 1.200,- Digital Read-Out€ 1.200,- The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
new
: neu : ca. 10 Wochen ab Auftrags : Türkei : 13000 € : 265.2 € : 1270 mm : 4 mm : 120 mm : 3 m/min : 2.2 kW : 2470 mm : 750 mm : 1000 mm : 1110 kg 3 rolls asymmetric rolls - prebending 2 rolls driven by brakemotor manual Back Roll forward tiltable upper roll forward and reverse revs conical bending by tilt of backroll movable control panel users manual in ENGLISH or GERMAN OPTIONS: hardened Rolls€ 1.250,- Motorised Back Roll (Power Rear Roll)€ 1.200,- Digital Read-Out€ 1.200,- The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
new
: neu : ca. 10 Wochen ab Auftrags : Türkei : 11000 € : 190 € : 1050 mm : 4 mm : 110 mm : 2.2 kW : 1100 mm : 750 mm : 1000 mm : 990 kg 3 rolls asymmetric rolls - prebending 2 rolls driven by brakemotor manual Back Roll forward tiltable upper roll forward and reverse revs conical bending by tilt of backroll movable control panel users manual in ENGLISH or GERMAN OPTIONS: hardened Rolls€ 1.120,- Motorised Back Roll (Power Rear Roll)€ 1.200,- Digital Read-Out€ 1.200,- The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
new
: neu : ca. 10 Wochen ab Auftrags : Türkei : 15000 € : 306 € : 1550 mm : 4 mm : 140 mm : 3,5 m/min : 2.2 kW : 2700 mm : 750 mm : 1000 mm : 1420 kg 3 rolls asymmetric rolls - prebending 2 rolls driven by brakemotor manual Back Roll forward tiltable upper roll forward and reverse revs conical bending by tilt of backroll movable control panel users manual in ENGLISH or GERMAN OPTIONS: hardened Rolls€ 1.500,- Motorised Back Roll (Power Rear Roll)€ 1.200,- Digital Read-Out€ 1.200,- The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
new
: neu : ca. 12 Wochen ab Auftrags : Türkei : 45000 € : 909 € : 60 to : 2150 mm : X und Y Achse : 150 mm/s : 160 mm : 1100 mm : 320 mm : 390 mm : hydraulisch : 10 mm/s : 500 mm : 5.5 kW : 1700 mm : 1600 mm : 2230 mm : 5450 kg NC control for immersion depth (Y) and back gauge (X) synchronization control by means of a torsion shaft sheet support arms light barriers intermediate pieces for the upper tool clamping die seat and die die seat with 4 V openings split upper tool, slightly cranked, divided pedal user manual in GERMAN (sample photo) Laser Protection Device Fiessler € 6 500,00 Controlled R-axis € 2 800,00 Manual Crowning device € 2 800,00 Motorized Crowning device € 4 200,00 The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
new
: neu : ca. 10 Wochen ab Auftrags : Türkei : 14000 € : 285.6 € : 1270 mm : 5 mm : 140 mm : 3,5 m/min : 2.2 kW : 2470 mm : 750 mm : 1000 mm : 1350 kg 3 rolls asymmetric rolls - prebending 2 rolls driven by brakemotor manual Back Roll forward tiltable upper roll forward and reverse revs conical bending by tilt of backroll movable control panel users manual in ENGLISH or GERMAN OPTIONS: hardened Rolls€ 1.500,- Motorised Back Roll (Power Rear Roll)€ 1.200,- Digital Read-Out€ 1.200,- The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
new
No hidden costs with us The advertisement concerns the basic version of the machine. You can get all prices and extras by contacting our technical and sales representatives. We always provide the final amount on quotes if the contract is signed within the valid period. We always quote the cost of shipping from our warehouse in Poland. Hydraulic press brake PBO-2563-N Estun E21 Specifications - Max working thickness (S235): do 4.0 mm - Nominal pressure: 630 kN - Max working length 2500 mm - Throat depth: 250 mm - Max stroke: 120 mm - Daylight: 370 mm - Distance between side frames: 2000 mm - Max backgauge distance: 500 mm - Nominal motor power: 5.5 kW - Length: 2600 mm - Width: 1400 mm - Height: 2200 mm - Weight: 3700.0 kg Tools - Front supports: 2 pcs - Automatic backgauge distance regulation (X-axis): electric motor - Ram control (Y-axis): electric motor - ...
new
No hidden costs with us The advertisement concerns the basic version of the machine. You can get all prices and extras by contacting our technical and sales representatives. We always provide the final amount on quotes if the contract is signed within the valid period. We always quote the cost of shipping from our warehouse in Poland. Hydraulic press brake PBO-3225-N Estun E21 Specifications - Max working thickness (S235): do 10.0 mm - Nominal pressure: 2500 kN - Max working length 3200 mm - Throat depth: 400 mm - Max stroke: 250 mm - Daylight: 535 mm - Distance between side frames: 2500 mm - Max backgauge distance: 500 mm - Nominal motor power: 18.5 kW - Length: 3300 mm - Width: 1850 mm - Height: 2900 mm - Weight: 11700.0 kg Tools - Front supports: 2 pcs - Automatic backgauge distance regulation (X-axis): electric motor - Ram control (Y-axis): electric motor ...
new
No hidden costs with us The advertisement concerns the basic version of the machine. You can get all prices and extras by contacting our technical and sales representatives. We always provide the final amount on quotes if the contract is signed within the valid period. We always quote the cost of shipping from our warehouse in Poland. Hydraulic press brake PBO-3225-CNC OT-41 Specifications - Max working thickness (S235): up to 10.0 mm - Nominal pressure: 2500 kN - Max working length 3200 mm - Throat depth: 400 mm - Max stroke: 250 mm - Daylight: 535 mm - Distance between side frames: 2500 mm - Max backgauge distance: 500 mm - Nominal motor power: 18.5 kW - Length: 3300 mm - Width: 1850 mm - Height: 2900 mm - Weight: 11700.0 kg Tools - Front supports: 2 pcs - Automatic backgauge distance regulation (X-axis): servo motor - Ram control (Y-axis): servo motor - F ...
new
No hidden costs with us The advertisement concerns the basic version of the machine. You can get all prices and extras by contacting our technical and sales representatives. We always provide the final amount on quotes if the contract is signed within the valid period. We always quote the cost of shipping from our warehouse in Poland. Hydraulic press brake PBO-4016-CNC OT-41 Specifications - Max working thickness (S235): up to 8.0 mm - Nominal pressure: 1600 kN - Max working length 4000 mm - Throat depth: 320 mm - Max stroke: 180 mm - Daylight: 455 mm - Distance between side frames: 3200 mm - Max backgauge distance: 500 mm - Nominal motor power: 15.0 kW - Length: 4100 mm - Width: 1650 mm - Height: 2600 mm - Weight: 10000.0 kg Tools - Front supports: 2 pcs - Automatic backgauge distance regulation (X-axis): servo motor - Ram control (Y-axis): servo motor - Fi ...
new
No hidden costs with us The advertisement concerns the basic version of the machine. You can get all prices and extras by contacting our technical and sales representatives. We always provide the final amount on quotes if the contract is signed within the valid period. We always quote the cost of shipping from our warehouse in Poland. Hydraulic press brake PBO-3220-CNC Delem DA-58T Specifications - Max working thickness (S235): do 8.0 mm - Nominal pressure: 2000 kN - Max working length 3200 mm - Throat depth: 320 mm - Max stroke: 200 mm - Daylight: 480 mm - Distance between side frames: 2700 mm - Max backgauge distance: 500 mm - Nominal motor power: 15.0 kW - Length: 3300 mm - Width: 1800 mm - Height: 2700 mm - Weight: 10500.0 kg Tools - Front supports: 2 pcs - Automatic backgauge distance regulation (X-axis): servo motor - Ram control (Y-axis): servo motor ...
used
Standard configuration ? Stable machine frame as a welded, all-steel construction ? Ram (press beam), highly resistant to torsional forces ? Electrohydraulic downstroke drive via proportional valves ? Modern block hydraulics ? CNC backgauge with rack-and-pinion drive, for X and R axis, safe adjustment of stop fingers from the front ? Modufix upper tool clamping system, manual ? Lower tool holder for single-V dies, manual clamping, programmable shifting ? Control system: 2D/3D graphic control, Delem DA 69 with 12 color screen (LCD) ? Safety equipment Additional equipment Crowning options ? CNC crowning Backgauge system options ? 4-axis backgauge system ? 2 additional clip-on stop fingers Tool clamping and angle messuring system ? Upper tool claming, hydraulic ? Lower tool clamping, hydraulic ? ACB Preparation Material handling options ? 2 front support brackets
used
Ø grinding wheel dimensions (od x id x width): Ø 650 x Ø 304,8 x 500mm, Ø min / max to grinding: 3/200 mm, Regulating wheel width: 500 mm, Regulating wheel speed nº: Infinite, Min / max regulating wheel speed (r.p.m.): 10/255 r.p.m., Dressing (auto / manual): Longitudinal auto, manual penetration of both grinding wheels, Cnc axes nº: 1, Diamond dressing speed: 255 r.p.m., Regulating wheel dimensions (od x id x width): Ø 350 x Ø 203,2 x 500mm, Grinding wheel width: 500 mm, Maximum infeed grinding length: 500 mm, Motor power grinding wheelhead: 55 Kw, Power hydraulic motor: 3 Kw, Total power: 60 Kw, Voltage: 220 / 380V, Long: 2.300 mm, Width: 2.800 mm, Accessories included: Grinding wheel balancer, plongeé rule holders / Grinding wheel balancer, plongeé rule holders., High: 2.100 mm, Weight: 15.000 Kg
used
Hydrodinamic bushings in spindle work head Hydrodinamic bushings in spindle wheel head Max. Grinding diameter : 145 mm Center height : 75 mm Manual cross feed (plongee)travel : 76 mm Distance between centers : 05 mm Work head speeds : 75/110/150/220/275/375/550/750 rpm Wheel dimensions : φ300X25Xφ74 mm External wheel motor power : 3 CV Internal manual grinding device Internal spindle max. speed : 18.000 rpm Tailstock center : MT 3 Workhead center : MT 4 Decanting coolant device Machine floor space required :1.585X1.090X1.460 mm Machine net weight : 1.070 Kg New electrical cabinet External/internal wheel motor inverter
new
: neu : ca. 6 Monate ab Auftragse : Taiwan : 27100 € : 547.42 € : 50 mm : MK 5 : 360 - 1.250 mm : 44 - 1.206 (12) U/min : Stahl/Guß: M40/M50 : 2060 mm : 995 mm : 2240 mm : 2300 kg : 441 - 1.345 mm : 0,06 - 0,2 (3) mm/min : 3.7 kW : 300 mm : 270 mm : 1.785 x 785 x 190 mm : 0,75 kW : 635 x 520 x 420 mm : 2645 mm : 0,75 kW left/right rotation automatic feed drilling depth limit manual headstock adjustment with hydraulic clamping electric height adjustment of extension arm andhydraulic clamping hydraulicclamping of swivel movement of extension arm central operation panel on the front side power load readout for drilling spindle hand wheel for spindle fine feed coolant equipment machine lamp box table machine and equipment according to the CE-regulations operating manual in GERMAN and ENGLISH The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
new
: neu : ca. 6 Monate ab Auftragse : Taiwan : 48700 € : 983.74 € : 65 mm : MK 5 : 440 - 1.580 mm : 40 - 1.920 (12) U/min : Stahl/Guß: M50/M60 : 2850 mm : 1400 mm : 2940 mm : 4600 kg : 380 - 1.600 mm : 0,07 - 0,96 (6) mm/min : 5.5 kW : 432 mm : 370 mm : 2.480 x 1.050 x 210 mm : 1,5 kW : 700 x 500 x 400 mm : 3170 mm : 0,75 kW left/right rotation automatic feed drilling depth limit manual headstock adjustment with hydraulic clamping electric height adjustment of extension arm andhydraulic clamping hydraulicclamping of swivel movement of extension arm central operation panel on the front side power load readout for drilling spindle hand wheel for spindle fine feed coolant equipment machine lamp box table machine and equipment according to the CE-regulations operating manual in GERMAN and ENGLISH (sample photo) The data for this ad was created with ModulMWS - the software solution of Log ...
new
: neu : ca. 6 Monate ab Auftragse : Taiwan : 32200 € : 650.44 € : 50 mm : MK 5 : 350 - 1.600 mm : 56 - 1.450 (12) U/min : Stahl/Guß: M40/M50 : 2670 mm : 1120 mm : 2410 mm : 3300 kg : 465 - 1.420 mm : 0,06 - 0,2 (3) mm/min : 3.7 kW : 320 mm : 270 mm : 2.550 x 970 x 200 mm : 1,5 kW : 630 x 500 x 500 mm : 2760 mm : 0,75 kW left/right rotation automatic feed drilling depth limit manual headstock adjustment with hydraulic clamping electric height adjustment of extension arm andhydraulic clamping hydraulicclamping of swivel movement of extension arm central operation panel on the front side power load readout for drilling spindle hand wheel for spindle fine feed coolant equipment machine lamp box table machine and equipment according to the CE-regulations operating manual in GERMAN and ENGLISH The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
new
: neu : ca. 6 Monate ab Auftragse : Taiwan : 14600 € : 297.84 € : 32 mm : MK 4 : 220 - 950 mm : 73 - 1.247 (6) U/min : Stahl: M 25, Guss: M 32 : 1800 mm : 830 mm : 2190 mm : 1250 kg : 350 - 1.210 mm : 0,05 - 0,15 (3) mm/min : 1.5 kW : 210 mm : 220 mm : 1.260 x 640 x 160 mm : 0,75 kW : 600 x 445 x 380 mm : 2320 mm left/right rotation automatic feed drilling depth limit manual headstock adjustment with mechanical clamping electric height adjustment of extension arm and mechanical clamping mechanical clamping of swivel movement of extension arm central operation panel on the front side power load readout for drilling spindle hand wheel for spindle fine feed coolant equipment machine lamp box table machine and equipment according to the CE-regulations operating manual in GERMAN and ENGLISH The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
new
: neu : ca. 6 Monate ab Auftragse : Taiwan : 18300 € : 373.32 € : 42 mm : MK 4 : 280 - 1.100 mm : 44 - 1.500 (12) U/min : Stahl: M 25, Guss: M 38 : 1880 mm : 870 mm : 2210 mm : 1800 kg : 470 - 1.270 mm : 0,05 - 0,15 (3) mm/min : 2.2 kW : 260 mm : 280 mm : 1.725 x 715 x 180 mm : 635 x 520 x 415 mm : 2530 mm left/right rotation automatic feed drilling depth limit manual headstock adjustment with mechanical clamping electric height adjustment of extension arm and mechanical clamping mechanical clamping of swivel movement of extension arm central operation panel on the front side power load readout for drilling spindle hand wheel for spindle fine feed coolant equipment machine lamp box table machine and equipment according to the CE-regulations operating manual in GERMAN and ENGLISH The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
new
pressure: 135 t chamfer lenght: 3100 mm distance between columns: 2600 mm dayligth: 550 mm throat: 410 mm stroke: 275 mm working feed: 10,0 mm/sec return speed: 120,0 mm/sec work height max.: 900 mm quantity of oil: 200 l Control: DELEM DA 58 T total power requirement: 11 kW weight of the machine ca.: 8650 kg dimensions: 4250 x 2050 x 2800 mm -------------------------------------------------- --------- Press brake with special equipment increased installation height increased cylinder stroke as well as increased bending beam speeds -------------------------------------------------- --------- Furnishing: - DELEM CNC control model DA-66T graphic/touch screen 2D graphical programming 17 TFT color screen with high resolution Bending sequence calculation Product programming and real size display USB interface intuitive, graphical entry of profiles Automatic calculation of features: ...
new
: neu : ca. 12 - 14 Wochen ab Auf : Türkei : 97700 € : 1983.31 € : 130 to : 1000 mm : 640 mm : 210 mm : 5 - 110 mm : 60 1/min : 630x400 mm : 90 mm : 330 mm : 11 kW : 2200 mm : 1372 mm : 3000 mm : 8200 kg 8-fold ram guide front protection by light guard manual ram adjustment mech. overload safety device automatic lubrication user manual in GERMAN and ENGLISH according to CE rules The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
new
: neu : ca. 12 - 14 Wochen ab Auf : Türkei : 79600 € : 1615.88 € : 110 to : 900 mm : 540 mm : 180 mm : 14 - 114 mm : 60 1/min : 490x325 mm : 90 mm : 280 mm : 7,5 kW : 1870 mm : 1320 mm : 2800 mm : 5600 kg 8-fold ram guide front protection by light guard manual ram adjustment mech. overload safety device automatic lubrication user manual in GERMAN and ENGLISH according to CE rules The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
new
: neu : ca. 12 - 14 Wochen ab Auf : Türkei : 67700 € : 1374.31 € : 63 to : 750 mm : 500 mm : 170 mm : 4 - 102 mm : 54 1/min : 490x325 mm : 90 mm : 270 mm : 440 mm : 7,5 kW : 1800 mm : 1150 mm : 2750 mm : 4100 kg 8-fold ram guide front protection by light guard manual stroke adjustment ram adjustment witch ratchet drive over gear combined clutch brake unit with pneumatic control fix table single and continuous stroke foot pedal and 2 hand control mech. overload safety device automatic central lubrication user manual in GERMAN and ENGLISH according to CE rules The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
new
: neu : ca. 12 - 14 Wochen ab Auf : Türkei : 74200 € : 1506.26 € : 80 to : 900 mm : 540 mm : 180 mm : 4 - 102 mm : 54 1/min : 490x325 mm : 280 mm : 380 mm : 7,5 kW : 2010 mm : 1390 mm : 2750 mm : 5400 kg 8-fold ram guide front protection by light guard manual stroke adjustment ram adjustment witch ratchet drive over gear combined clutch brake unit with pneumatic control fix table single and continuous stroke foot pedal and 2 hand control mech. overload safety device automatic central lubrication user manual in GERMAN and ENGLISH according to CE rules The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
used
pressure: 105 t chamfer lenght: 3100 mm distance between columns: 2600 mm table width: 100 mm table height: 750 mm Control: DELEM DA 65 dayligth: 200 mm working feed: 0 - 10 mm/sec return speed: 0-100 mm/sec rapid traverse - up: max. 100 mm/sec voltage: 380 V / 50 Hz total power requirement: 11 kW weight of the machine ca.: 7,5 t dimensions of the machine ca.: 4 x 2,2 x 2,8 m Equipment: • manual back stop • upper and lower tools • 2 manual operation / foot switch The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
used
- Speed of 15 cm/s - 6 seconds from low to high chamber of the oven. - For double wide ovens. - Setter movement up and down: gear drive. - Setter movenment into hearth chamber and vice versa: manual. - Setter belt back and forth: manual.
new
sheet width: 1020 mm plate thickness: 2,5 mm daylight opening: 48 mm daylight opening: 150 mm ohne Segmente bending angle max.: 0 - 135 ° work height max.: 900 mm total power requirement: von Hand kW weight of the machine ca.: 340 kg dimensions of the machine ca.: 1,35 x 0,82 x 1,30 m Furnishing: - Swivel bending machines with segm. Upper, lower and bending beam - Universally usable bending machine for sheet metal works and repair shops - Robust construction in a modern design - Easy adjustment of the upper beam using a foot pedal - Hands are free for the workpiece - Manual bending machine for standard bending tasks - Segmented upper beam for a large number of bending possibilities - Optimum price-performance ratio - Quick and easy bending process using the bow handle - Non-slip rubber covering on the foot pedal for safe working - Easy adjustment of the lower beam to the respective shee ...
new
sheet width: 1270 mm plate thickness: 2,0 mm daylight opening: 48 mm daylight opening: 150 mm ohne Segmente bending angle max.: 0 - 135 ° work height max.: 900 mm total power requirement: von Hand kW weight of the machine ca.: 465 kg dimensions of the machine ca.: 1620 x 1070 x 1280 mm Furnishing: - Swivel bending machines with segm. Upper, lower and bending beam - Universally usable bending machine for sheet metal works and repair shops - Robust construction in a modern design - Easy adjustment of the upper beam using a foot pedal - Hands are free for the workpiece - Manual bending machine for standard bending tasks - Segmented upper beam for a large number of bending possibilities - Optimum price-performance ratio - Quick and easy bending process using the bow handle - Non-slip rubber covering on the foot pedal for safe working - Easy adjustment of the lower beam to the respective she ...
used
Vertical pot sanding machine DELTA LF 350 Grinding length approx. 350mm Grinding width approx. 155mm Grinding height approx. 300mm Spindle speed approx. 2800 rpm Drive power approx. 3Kw Grinding movement right / left - manual Z -Delivery Manual Accessories: Magnet Documentation Wet grinding device 2 x pot disc Puller Grinding wheel protection Fine adjustment Z-axis Dimensions: LxWxH approx. 1x0.8x1.8 meters Weight approx. 600Kg
used
VERTICAL - POT GRINDING MACHINE DELTA LF350 Cgvnbqkquz Control - Conventional Grinding length approx. 360mm Grinding width approx. 155mm Grinding height approx. 300mm Spindle speed approx. 2850 rpm Drive power approx. 3 KW Grinding Movement / Right - Left / Manual Z - Delivery - Manual Accessories: Magnet Wet grinding device Machine housing Documentation Puller Grinding wheel Fine adjustment Z - axis Dimensions: LxWxH approx. 1x1x1.8 meters Weight approx. 600Kg
used
Stefani edge sander 1 grinding unit Self-firing grinding unit Manual adjustment of the grinding unit Manual adjustment of the aggregate angle Grinding unit with oscillation 1.5kw main motor Feed speed adjustable
new
L-beam: 40 x 5 (d 500) mm I - beam section - flat steel: 80 x 15 (d 700) mm I-beam section - upend: 50 x 10 (d 800) mm round material: 30,0 (d 700) mm bar material dia. max.: 60 x 2 (d 1200) mm square material: 50 x 30 x 3 mm range L-W-H: 670 x 530 x 1350 mm weight: 185 kg total power requirement: 0,75 kW Furnishing: - Robust electro-motor ring/profile bending machine - Horizontal and vertical work possible Machine head foldable by 90° - 1x free moving footswitch - segmented standard rollers (divided) - 2x motor driven rollers - manual delivery of the top roller - analogue position display of the top rollers (scale) - manually adjustable lateral/straightening rollers - CE mark / declaration of conformity - User manual in German The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.