127,338 used machines on RESALE, but how to find them? Machine Search
1. VFK CARTRIDGE FILTERED POWDER COATING BOOTH (1-SIDED) Cartridge type powder coating booths are cost-effective solutions for companies that generally use single color powder coating or do not change the paint color much. WORKING PRINCIPLE The extraction fan is located at the top of the booth, at the end of the system. The pressurized air flow created by the fan carries the powder coating particles towards the filters and collects them on the outer surface of the filters. Powder coating filters are cartridge type and are cleaned during operation by a pull-reverse filter cleaning system. The pull-reverse system consists of pulse valves and a compressed air tank, controlled automatically or operated using manual buttons on the control panel. POWDER RECYCLING As a result of the filter cleaning system, powder coating particles fall down and are manually collected in a bucket at the bot ...
Key data: 630 mm
Manual Tin Shears / Guillotine Shears with Table - Heavy-duty design - Adjustable front stop 360 mm - with table and runway Specification - Max. cutting length: 630 mm - Table dimensions WxD: 630 x 540 mm - Front stop: 360 mm - Dimensions WxHxD: approx. 1000 x 1200 x 2000 mm - Weight: approx. 300 kg
Weight: 0.1 tons Power: 0.6 Kw Waterpressure: 3 Bar Length mm: 1600 Width mm: 900 Height mm: 1300 Working height: 90 cm Transport size L x W x H: 2,5 x 1,36 x 1,3 Min.-max glass size: 1,20 x 55 cm Number of spindles: 1 Condition machine : Good Control type: Manual Electric. Connection: 16A 400V Documentation: No Instructions: No Electric diagram: No Parts list: N/a Available software: N/a Photos/film available: Photos and video available
- Condition: Presentation Machine - Usable volume: 80 L
Manual Roll Stacker and Turner for Tetra Pak Packaging Material Rolls Practical manual handling device designed for safe stacking and turning of Tetra Pak packaging material rolls in production and warehouse environments. This unit is brand new and unused, making it an excellent solution for efficient roll handling in carton packaging facilities. General Information - Machine Type: Manual Roll Stacker and Turner - Application: Handling of Tetra Pak packaging material rolls - Year of Manufacture: 2023 - Condition: New and unused - Working Hours: 0 hours Technical Specifications - Maximum Pick-Up Weight: 400 kg Key Advantages - Designed specifically for Tetra Pak packaging material rolls - Enables safe lifting, stacking, and turning operations - Manual operation for flexible use in production or storage areas - Brand new unit with 0 working hours - Suitable for packa ...
6 + 6 meter rollenbanen voorzien van handmatige achteraanslag en digitale uitlezing Rollenbanen zijn in hoogte verstelbaar. maximale breedte 500 mm inclusief verbindingsstukken om de rollenbanen aan uw machine te kunnen bevestigen
We offer this used Weber Ultrasonics Saphir Digital Manual Station Ultrasonic Welding Machine, built in 2023. About 92500 units were produced with this machine. Sonotrode TR35Ti Frequency: 35kHz Power: 1000W 230V AC Displacement measuring system: 26.88 mm Minimum force: 34 N Maximum force: 500 N Low Level: 0 N Low Offset: 0 N If you have any questions or need more information, please feel free to send us a message or give us a call.
The weber ultrasonic saphir digital station is used for ultrasonic welding. The system is sold with a machine table and workpiece holder as shown in the pictures. Frequency 35kHz, Power 1000W, 230V AC (Schuko plug), Sonotrode TR35Ti, Min force 30N, Max force 380N The touch panel has a small defect, but the use is not affected.
Key data: 10 t
Various spare parts for eccentric press - brands SMERAL and VSS KOSICE
Manufacturer: Eurotherm Year of Manufacture: 2019 Type of Machine : Manual Wash Booth with Automatic Spray Ring Condition: Good, regularly maintained (once per year) Cabin Dimensions - Internal Width: 4,000 mm - Internal Length: 7,000 mm - Internal Height: 3,500 mm - External Width: 4,100 mm - External Depth: 7,100 mm - External Height: 4,100 mm (double base tray) Construction - Cabin Type: Closed - Exhaust Air: Extraction at end of cabin - Panel Thickness: 50 mm with polyurethane insulation - Inner Walls: Stainless steel AISI 304 (V2A) - Outer Walls: Galvanized sheet metal, painted - Steel Profiles: Blue RAL 5002 - Access Door: 1 door, manual 4-leaf type, 4,000 x 3,500 mm, Blue RAL 5002 Exhaust and Ventilation - Air Flow Rate: 10,000 m3/h - Fan Motor Output: 1.5 kW - Droplet Separator: Yes - Chimney: Included, height 6.5 m - Lighting: 8 LED fixtures Automatic Spray Ring - Max ...
Manual Sandblasting Cabinet Manual sandblasting cabinets are economical and versatile booths that can be used with various abrasives. The booths feature doors that open from both sides for ergonomic use. The sandblasting booths are made of sheet metal, and both the inside of the booth and the inside of the door are coated with wear-resistant rubber. The doors are equipped with special gasket reinforcement for complete sealing. The front of the booth features two hand application holes. These holes house long-lasting, replaceable gloves and a wide-angle viewing window with glass. An optional portable stand and a rotary turntable are available on the side of the booth. The compressed air circuit includes various components, from an oil and water filter to a pressure gauge regulator and a foot-operated, lockable pedal valve. A long-lasting boron carbide sandblasting nozzle is al ...
200 lt manual blasting machine set Whole set contents to be delivered below: • 200 lt automatic sandblasting pot • 20 mt blasting hose • 40 mt pneumatic hose • 20 mt oxygen hose • Sandblasting mask • Full body leather overalls • Automatic valve • SGV valve • Air stand • Blasting nozzle • Adapter • Coupling • Blasting claw couplings
Manual Sandblasting Cabinet Manual sandblasting cabinets are economical and versatile booths that can be used with various abrasives. The booths feature doors that open from both sides for ergonomic use. The sandblasting booths are made of sheet metal, and both the inside of the booth and the inside of the door are coated with wear-resistant rubber. The doors are equipped with special gasket reinforcement for complete sealing. The front of the booth features two hand application holes. These holes house long-lasting, replaceable gloves and a wide-angle viewing window with glass. An optional portable stand and a rotary turntable are available on the side of the booth. The compressed air circuit includes various components, from an oil and water filter to a pressure gauge regulator and a foot-operated, lockable pedal valve. A long-lasting boron carbide sandblasting nozzle is al ...
Manufacturer: SCM Model: Minimax E10 Year of Manufacture: 2019 Type of Machine: Manual ABS Edge-Banding Machine for Curved Surfaces Version: CE Technical Data: - Thickness of pre-cut strip edging: 0.4–3 mm - Edging thickness with guillotine (edge height 80 mm): 0.4–1.5 mm - Edging thickness with guillotine (edge height 50 mm): 0.4–2.5 mm - Edging thickness with guillotine (edge height 45 mm): 0.4–3 mm - Edge height: 10–84 mm - Panel thickness: 8–80 mm - Minimum panel width: 50 mm - Minimum applicable edging length: 210 mm - Minimum internal radius with 0.4 mm edging, concave surface: 25 mm - Minimum internal radius with 0.4 mm edging, convex surface: 5 mm - Feed speeds: 4 / 8 m/min - Working temperature: 140–220 degrees C - Installed power: 3.5 kW / 380 V / 50 Hz - Machine body dimensions: 1,000 x 740 x 1,100 mm (height) - Roll-holder plate diameter: 520 mm - Compress ...
Power supply: 240V; Power consumption: 0.33 kWh; Sturdy metal construction; Silicone seal for tight closure; Temperature control; Replaceable attachments Auction-ID: A7-48577-100
Manual Edger Esterer EWD DKV with task table good condition ! Immediately available !; Well
Hand spindle press to push pins in printed circuit boards 2 presses on a plate, with a dial indicator.
Manual transmission, throttle grip, throttle lever, drive lever, control lever, direction lever for outboard motors, outboard motor, outboard engine, boat engine -Hand shift: Throttle grip, unfortunately without type designation -Dimensions: 650/180/190 mm -Weight: 1.4 kg
Measuring machine, manual Erichsen cupping testing machine, cupping testing machine, sheet metal testing machine -Manufacturer: Klingenthal -Type: 05 -Sheet metal testing machine: Erichsen cupping, up to 2.0 mm -Accessories: see photos -Dimensions: 460/360/H335 mm -Weight: 20.5 kg
Manual hand table for printing on paper, cardboard, film, PVC, acrylic etc. Up to 10 cm in thickness With counterweight Printing table: External dimensions: L 2395 mm x W 1675 mm x H 800 mm plate: 1250 mm x 1740 mm 100 x 100 cm weight: 150 kg min screen: 50 x 50 mm maximum printing frame: 1100 x 1500 mm
Spoon width 1100 x 550mm 2 x 150 mm wide Auction-ID: A1-47350-265
Equipped with: manual turning, pre-shearing, three-point attachment Auction-ID: A1-47380-136
Mounted on a mobile table, without accessories Auction-ID: A7-48794-172
Technical data Manufacturer: Otto Schröder Stroke: 160mm hand adjustable Distance between the stand: 800mm Pass: 250mm Support table: 800mm, with 4 grooves subcircle of 400mm groove dimension 25x75mm Bore: table center of 70mm Table height: 835mm Dimensions: LxWxH 110x900x2200mm
pressure: manuell t distance between columns: 50 mm dayligth: 50 mm total power requirement: kW weight of the machine ca.: 0,01 t dimensions of the machine ca.: 0,3 x 0,3 x 0,3 m • 4 units available, • bore at bottom, Ø 10 mm, • thread in spindle M 6, The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Lever hoist, ratchet hoist KAISER +KRAFT Type: 1117 Load capacity: 3000 kg Chain length: 1500 mm used, tested ! Dimensions: 800 x 250 x 230 mm
Well-maintained SEAT Ibiza 1.0 TSI from 2016 with traceable maintenance history. The vehicle starts, drives and is in an age-appropriate, well-maintained condition. German vehicle documents as well as several service and TÜV documents are available. Brand: SEAT Model: Ibiza (6J) Registration date: 05.09.2016 Mileage: 154,203 km Engine: 1.0 TSI petrol Power: 66 kW (90 hp) Displacement: 999 cm³ Transmission: Manual Emission standard: Euro 6 Color: Gray Drive: Front-wheel drive 5 doors Documents & Maintenance German Registration Certificate Part I available German Registration Certificate Part II available Several service and maintenance records available TÜV/HU reports available Regular maintenance documented Oil change documented Condition Vehicle starts and drives Signs of wear and te ...
Hand screw press, used Balancier, used Typ/ type: PSHZ 25/I Presskraft / rated pressure: 25 t Hub/ stroke: 250 mm Tischgrösse/ table size: 400x 500 mm Ram: 200 x 500 mm Tischöffnung / hole in table: 140 mm Weight/ weight: 0,9t
Lever hoist, ratchet hoist PAGUS load capacity: 6300 kg stroke: 3000 mm with roller chain used, tested ! weight: 59 kg Dimensions: 1000 x 800 x 230 mm
Includes 2 empty drums and manual lubrication pump Auction-ID: A1-46485-83
Hand Control Valve, Hand Control Valve WMW St H2 ND: 1.0 MPa NW: 6 mm used ! Dimensions: 140 x 110 x 130 mm
Heavy-duty hand chain hoist KITO CB150 - 15t (15,000 kg) Manufacturer: Kito. Made in Japan. Lifting height: 3.50 m Load: 15,000 kg Load chain diameter: 9.0 x 27.0 mm Weight: 155 kg The device has a current inspection sticker from Kito Europe (valid until 12/2024), which proves that it is in perfect technical condition. The load chain (9.0x27mm) and hooks are optically in top condition, no visible deformation or corrosion. The nameplate is perfectly legible (serial number available). A physical test book is not included in the scope of delivery, but can be easily recreated due to the database. Areas of application & details: Kito CB150, hand chain hoist 15t, pulley 15 tons, heavy duty hoist, Kito M3B, chain hoist used, workshop crane hoist, industrial chain hoist, load lifter 15000kg, Kito Europe, hoist test UVV, chain hoist 3.5m stroke, heavy duty crane accessories, constru ...
Basket size LxWxH:550 x 300 x 350 mm No. of washing chambers:1 No. Of tanks for washing:1 Temperature for washing water:60 °C Ultrasonic cleaning unit with high alloybasket - Ultrasonic frequency 28 kHz - automatic breakdown for heating and ultrasonic for low level water
Basket size LxWxH:900 x 1.500 x 500 mm Max. basket weight:- kg No. of washing chambers:1 filling amount:min. 270, max. 400 l Machine weight:2.000 kg dimensions of machine:2.650 x 1.945 x 1.870 mm
pressure: 5 t distance between columns: 300 mm dayligth: ? mm weight of the machine ca.: - t dimensions of the machine ca.: - m Handspindelpresse 5 to Workspace: Tischfläche 280 x 260 Control: ca. 180 mm Hub The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
SPECIFICATIONS: Machinable width: max. 300 mm Wheelbase: 32 mm Installed power: 1.2 HP Voltage: 380 V
manueller Deckenherstellung - manual Casemaker Schmedt PräDeck Year 05-1986 - Serial-Nr. 246 Online-Video-Inspection by Skype-Video We would be very pleased with your visit - more machines on Stock Available Immediately - Can be inspect On Stock Emskirchen / Nürnberg - Can be test
SPECIFICATIONS: Machinable width: max. 300 mm Wheelbase: 32 mm Installed power: 1.2 HP Voltage: 380 V
Manueller Handstapler / Manual Hand Stacker Carl Stahl FL 600 Baujahr / Year 2000 - Serial-No. 13557 Tragkraft / Capacity max. 600 kg Eigengewicht / own weight 210kg Hubhöhe / Lift high max. 1600mm Gabel Länge / forks length 1.150 mm Lastschwerpunkt / Load Center 600 mm Online-Video-Inspection by Skype-Video We would be very pleased with your visit - more machines on Stock Available Immediately - Can be inspect On Stock Emskirchen / Nürnberg - Can be test
Manual control valve, manual control valve WMW StH-2 ( STH2, StH 2 ) ND: 1.0 MPa ( 10 bar ) NW: 6 mm with accessories New, with documents ! Dimensions ( Valve ) 135 x 120 x 105 mm Dimensions ( Package ): 150 x 120 x 110 mm
Manuals for Heidelberg Quickmaster 46- one and two color: Spare part book -multilingual and instruction manual in German. In very nice condition, no pages missing. Can ship worldwide.
pressure: 28 t distance between columns: 510 mm dayligth: 380 mm stroke: 260 mm weight of the machine ca.: ca. 750 kg The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
maximum number of results exceeded
please refine your search
210 € 
