Manufacturer:
(Category: 301)
Key data: 220 kN, 27 g/PS, 22 mm
Newly refurbished, we have this BOY 22D. The machine is a compact 22 tonne clamp machine with a very easy to use controller with the Dipronic system. These machines have stood the test of time and remain very popular as they are simple to use, cheap to repair and reliable. Fitted with a 22mm diameter screw, which gives a max shot weight PS (g) of 27. Refurbished machines from STV Machinery undergo a comprehensive test procedure during which every function of the machine is tested and if necessary repaired. A production run of at least 5000 fault free cycles prior to sign off ensures trouble free operation once delivered. Machines are ultra clean and cosmetically as good as we can get them. We guarantee our refurbs are delivered fault free and leak free.
used
Key data: 220 kN, 32 g/PS, 24 mm
Just arrived and now awaiting refurbishment by the team is this Boy 22M-HV machine. The injection unit can be mounted vertically or horizontally, allowing for split line or traditional moulding respectively. Fitted with a 24mm diameter screw. Manufactured in 2006 and has less than 28,000 hours. These small machines are quite rare on the used market, they are very versatile from a very small footprint. The rest of the machine is standard as per a typical BOY 22M, you can find the specification data via the clickable link above. Fitted with the Procan MD version of the user friendly and well supported Procan control system. Any machines awaiting refurbishment with us can be reserved with a 10% deposit and we then prioritise the refurbishment and aim to have the machine available for inspection within 8 weeks from order. Refurbished machines undergo a comprehensive test procedure ...
B&A REF: 9108 TON: 430 SCREW DIAMETER: 80MM SHOT WEIGHT: 1645 STROKE VOLUME: 1810CM3 INJECTION PRESSURE: 1615AR PLATEN SIZES: 1060 X 1135MM DBTB: 680 X 760MM MIN MOULD HEIGHT: 250MM MAX MOULD HEIGHT: 800MM MOULD OPENING STROKE: 730MM MAX DAYLIGHT: 1530MM EJECTOR STROKE: 250MM CONTROLS: COLUMBIA CORE PULLING: 3 AIR VALVES: 4 MOTOR: 45 HEATING CAPACITY: 34KW ROBOT INTERFACE: EUROMAP 67 SCREW DRIVE: HYDRAULIC
Clamping force: 400kN, heating output: 5.5kW, connected load: 20.5kW, weight: 4.7t, operational hours counter: 18,287h, an inspection is possible.
Key data: 2000 kN, 240 g/PS, 45 mm
Arburg 520 C - Allrounder 2000-675 -Injection molding machine - Control: Selogica - Handlebar spacing: 520 x 520 mm - Handlebar extension: 100 mm - Tool installation height: 350 mm - Opening travel: 650 mm - Centering: 125 mm - Core pull: 2 - Screw diameter: 45 mm - Shot weight - HP : 240g - Clamping force: 2000 KN - Operating hours pump: 61908 - Automatic operating hours: 55566 - Working position: Standard
used
Key data: 2200 kN, 510 g/PS, 55 mm
Injection moulding machines ENGEL Victory 1050-220 TECH Stock No.: 503559 Manufacturer: ENGEL Type: Victory 1050-220 TECH Control: CC100 Year of Make: 2006 Hours: 62149 h Technical data closing page Clamping force: 2200 kN Plate size h x v: 860 x 830 mm Min. installation height: 300 mm Plate spacing max.: 1045 mm Opening travel: 755 mm Ejector stroke: 180 mm Ejector force: 80 kN Centering of movable plate D: 160 mm Centering fixed plate D: 160 mm Technical Data Spray Side Screw diameter: 55 mm Displacement: 510 cc Spray pressure: 1615 bar Screw length: 20 l/d Screw stroke: 200 mm Screw speed: 230 min Plasticizing current: 55 g/s PS Outdoor injection flow: 255 g/s hp Number of heating zones: 5 Nozzle travel: 350 mm Dimensions & Weight Machine dimensions LxWxH: 6.8m x 1.8m x 2.4m Total Weight: 12900KG Equipment Screen text German Machine includin ...
Key data: 1200 kN, 35 mm
Injection moulding machine ENGEL Victory 330-120 Tech Stock No.: 503558 Manufacturer: ENGEL Type: Victory 330-120 Tech Control: CC100 Year of Make: 2007 Operating hours: 68000 h Technical data closing page Clamping force: 1200 kN Panel size h x v: 740 x 470 mm Min. installation height: 300 mm Plate spacing max.: 800 mm Opening travel: 500 mm Ejector stroke: 130 mm Ejector force: 40 kN Centering of movable plate D: 125 mm Centering of fixed plate D: 125 mm Tool weight: 825 kg Technical Data Spray Side Screw diameter: 35 mm Displacement: 154 cc Spray pressure: 1600 bar Screw length: 20 l/d Screw stroke: 160 mm Screw speed: 400 min Outdoor injection flow: 151 g/s hp Number of heating zones: 4 Nozzle travel: 250 mm Dimensions & Weight Machine dimensions LxWxH: 5.1m x 1.5m x 2.1m Total Weight: 7300KG Equipment Screen text German Levelling elements ...
Key data: 800 kN, 30 mm
Injection moulding machine ENGEL Victory 200-80 Tech Stock No.: 503561 Manufacturer: ENGEL Type: VICTORY 200-80 Tech Control: CC 100 Year of Make: 2005 Hours: 76679 h Technical data closing page Clamping force: 800 kN Panel size h x v: 670 x 420 mm Min. installation height: 250 mm Plate spacing max.: 700 mm Opening travel: 450 mm Ejector stroke: 100 mm Ejector force: 40 kN Centering of movable plate D: 125 mm Centering of fixed plate D: 125 mm Tool weight: 675 kg Technical Data Spray Side Screw diameter: 30 mm Displacement: 99 cc Spray pressure: 1450 bar Screw length: 20 l/d Screw stroke: 140 mm Plasticizing current: 17 g/s PS Injection flow to the outside: 150 g/s hp Number of heating zones: 4 Nozzle travel: 200 mm Dimensions & Weight Machine dimensions LxWxH: 4.05m x 1.93m x 2.1m Total Weight: 5200KG Equipment Screen text German Levelling eleme ...
Key data: 280 kN, 30 mm
Injection moulding machine ENGEL Victory 200-28 Tech Stock No.: 503562 Manufacturer: ENGEL Type: Victory 200-28 Tech Hours: 31150 Control: CC200 Year of Make: 2011 Technical data closing page Clamping force: 280 kN Panel size h x v: 500 x 450 mm Min. installation height: 150 mm Plate spacing max.: 550 mm Opening travel: 400 mm Ejector stroke: 100 mm Ejector force: 40 kN Centering of movable plate D: 125 mm Centering of fixed plate D: 125 mm Tool weight: 450 kg Technical Data Spray Side Screw diameter: 30 mm Displacement: 135 cc Spray pressure: 1065 bar Screw length: 17 l/d Screw stroke: 140 mm Screw speed: 480 min Injection flow to the outside: 78 g/s hp Number of heating zones: 4 Nozzle travel: 230 mm Dimensions & Weight Machine dimensions LxWxH: 3.2m x 1.35m x 1.85m Total Weight: 2900KG Equipment Screen text German Levelling elements Technic ...
Sell some machines from our warehouse
Key data: 3000 kN, 2746 g/PS, 120 mm
GL300 PET P100/110 E120 in production running 72cav molds exworks south america 2002 auxiliaries Pet resin dryer Piovan DS528 Throughput 650 kg/h silo capacity 5Ton radial vacuum pump mold dehumidifier Plastics Systems DSH2400 conveying system TEC - 24X2X10.5
Key data: 3000 kN, 3268 g/PS, 120 mm
GL300 PET P100/120 E120 in production running 72cav molds exworks south america 1998 auxiliaries Pet resin dryer Plastic Systems DR218HT Throughput 550 kg/h silo capacity 4Ton radial vacuum pump mold dehumidifier Plastics Systems DSH2400 conveying system Plastic Systems Plastic Systems P+D8:J55SNC 9
Key data: 3000 kN, 3268 g/PS, 100 mm
GL300 PET P100/120 E100 in production running 72cav molds exworks south america 1997 auxiliaries Pet resin dryer Moretto DP311 model DP 311HT-CC'S Throughput 550 kg/h silo capacity 3.5Ton radial vacuum pump mold dehumidifier Plastics Systems DSH2400 conveying system Plastic Systems NSC-NP
Key data: 5000 kN, 3845 g/PS, 120 mm
Husky SX500 running 96 cavities molds not in production since Feb 2024 120mm screw 3845cm3 shotweight manufactured June 1995 between bars 920x920mm
Key data: 3000 kN, 3268 g/PS, 100 mm
LX300 PET P100/120 E100 in production 48 cavities year 1996 exworks south america Auxiliaries included Plastic Systems resin dryer model DR224HT Throughput 800 kg/h Silo capacity 7 ton Radial vacuum pump Mold dehumidifier Piovan model RPA 2400 Conveying system TEC 24X2X10.4
Clamping force: 900 tScrew diameter: 90 mmShot weight: 1576 gDistance between tie bars V: 1000 mmDistance between tie bars H: 1180 mmShot volume: 1732 cm3Type: HorizontalDrive: Hydraulic
Model: EL-EXIS S 100/420-310 DEMAG ERGOTECH- EL-EXIS E 1000/420-310 (130)Year of production: 2005Controll: NC4 TECHNICAL DATAScrew Dia [mm]: 35Shot Weight [g]: 150Injection Pressure [bar]: 1865Clamping Force [kN]: 1000Tie Bar Distance [mm]: 420 x 420Platen Size [mm]: 600 x 600Mould Height min. [mm]: 200Machine tested
clamping force: 800 kNinjection volume: 160,8 cm³screw diameter: 40 mmplaten size: 600 x 632 mmCondition: used,Specification: Horizontal injection molding machine,injection unit:- Injection volume: 160,8 cm³- Screw diameter: 40 mm- Injection pressure max.: 1,690 barClamping unit:- Platen size: 600 x 632 mm- Platen distance: 410 mm- Opening stroke max.: 350 mm- Mold height min.: 200 mm- Mold height max.: 500 mm- Closing: Fully electric- Operating hours approx.: 82,400 h- Transport weight approx.: 7,800 kgA total of 10 injection molding machines of similar size are available,built between 1997 and 2008 are available.This is one of these machines, from the same supplier.The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Key data: 800 kN, 45 mm
KRAUSS MAFFEI KM 80-750 CX Stock No.: 503569 Manufacturer: KRAUSS MAFFEI Type: KM 80-750 CX Control: MC6 Year of Make: 2012 Operating hours: 34000 h Technical data closing page Clamping force: 800 kN Wooden dimensions h x v: 420 x 420 mm Panel size h x v: 670 x 670 mm Min. installation height: 250 mm Max. installation height: 500 mm Plate spacing max.: 750 mm Opening travel: 500 mm Ejector stroke: 150 mm Ejector force: 23 kN Centering of movable plate D: 125 mm Centering of fixed plate D: 125 mm Tool weight: 1000 kg Technical Data Spray Side Screw diameter: 45 mm Displacement: 318 cc Spray pressure: 2336 bar Screw length: 22 l/d Screw speed: 355 min Outdoor injection flow: 143 g/s PS Number of heating zones: 5 Dimensions & Weight Machine dimensions LxWxH: 4.5m x 1.5m x 2m Total Weight: 3900KG Equipment Screen text German Core pull hydraulic 1x M ...
Engel ES200/45VTHL-PRO-ELAST (2002)Clamping force: 45 tType: VerticalDrive: Hydraulic
Manufacturer: Arburg Type: 320 S 500 - 150 Year of production: 2000 Controls: Selogica Closure Type: Hydraulic Clamping force: 500 kN Bar spacing: 320 mm x 320 mm Plate Size: 498mm x 498mm Tool height: min 225 mm Opening Distance: 350mm Maximum distance between plates: 575 mm Screw: 35mm Stroke volume: 106 ccm / 89 gram PS Injection pressure: 1610 bar General Motor: 15kw Heating: 4.8 kW Dimensions: 3.7 m x 1.2 m x 1.8 m weight: 2250 kg On-screen text: German Additional equipment: Core String: x1 Euromap
Key data: 1300 mm, 117 , 35
Producent: Arburg Typ: 470 S 1300 - 350 Rok produkcji: 1999 Sterowanie: Selogica Typ zamknięcia: Hydrauliczny Siła zamykania: 1300 kN Rozstaw prętów: 470 mm x 470 mm Rozmiar płyty: 650 mm x 650 mm Wysokość narzędzia: min 275 mm Odległość otwarcia: 575 mm Maksymalna odległość między płytami: 850 mm Śruba: 35 mm Objętość skoku: 139 ccm / 117 gram PS Ciśnienie wtrysku: 2500 bar Ogólne Silnik: 22 kW Ogrzewanie: 8,8 kW Wymiary: 4,5 m x 1,6 m x 2 waga: 5100 kg Tekst na ekranie: niemiecki Dodatkowe wyposażenie/wyposażenie Rdzeń ciągnący: x1 Euromap Gorące strefy
Key data: 50 , 1 , 14
Manufacturer: Battenfeld Type: Microsystem 50 Year of production: 2000 Control: Unilog B4 Closure Type: Knee Closing force: 50 kN Maximum mold dimensions: 196 mm x 156 mm Plate Size: 196mm x 364mm Tool height: min 100 Opening Distance: 200mm Maximum distance between plates: 300 mm Screw: 14mm Stroke Volume: 1.1 ccm / 1 gram PS Injection pressure: 2500 bar General Total power: 2 kW Dimensions: 1.9 m x 0.8 m x 2.4 m weight: 1100 kg On-screen text: German Accessories: • Rotary table, • Robot integrated with the machine, • Fully electric injection molding machine, • Quality monitoring module, • Cleanroom module, • In-mold pressure control • Quiet operation of the machine • Additional 14 mm auger
Arburg 320C 500-100 (2008)Clamping force: 50 tScrew diameter: 25 mmOpening stroke 350 mmMould height : 200 mmDistance between tie bars V: 320 mmDistance between tie bars H: 320 mmMould clamping platens: 446x446Injection pressure : 2240Injection flow : 124 cm3Ejector stroke : 125 mmEjector force: 30 kNNet weight : 2080 kgType: HorizontalDrive: HydraulicSelogicaCF card readermachine testedEnglish languageType: HorizontalDrive: HydraulicMachine hours: 53000
Key data: 700 kN, 132 g/PS, 35 mm
Injection moulding machine Arburg 370S-700-290 Item number: 232 Availability: In stock Year of Make: 2008 Brand: Arburg Specifications Injection weight: 132 g Clamping force: 700 kN Screw diameter: 35 mm Spray pressure: 2000 bar Tiebar spacing: 370x370 mm Clamping plate size: 510x510 mm Tool installation height min.: 200 mm Plate spacing max: 600 mm Control: Selogica Language: German Power: 23.9 kW Hours: 67848 h Weight: 3300 kg Dimensions: 3.8x1.5 m Funnel: No Euromap: Yes Air Valve: Yes
Clamping force: 60 tScrew diameter: 30 mmShot weight: 96 gDistance between tie bars V: 520 mmDistance between tie bars H: 520 mmShot volume: 106 cm31 x core pullerType: HorizontalDrive: Hydraulic
Inv. Num. : 8161 Type: RSO 32 Producer: Reinhardt Created: 2008 Parameters: The machine is in good condition.
used
(1) Gas (2) Fuel (3) Electric: 0 Temperature maximum: 0 C°Capacity (kg): 0 kg Technical dataWorking space:Width: 600 mmHeight: 650 mmdepth: 800 mmExternal dimensions:Length: 1200 mmWidth: 900 mmHeight: 2000 mm
Key data: 2500 kN, 510 g/PS, 55 mm
Injection moulding machine Arburg 630S-2500-1300 (231) Item number: 231 Availability: In stock Year of Make: 2007 Brand: Arburg Specifications Injection weight: 510 g Clamping force: 2,500 kN Screw diameter: 55 mm Spray pressure: 2380 bar Tiebar spacing: 630x630 mm Clamping plate size: 900x900 mm Tool installation height min.: 400 mm Plate spacing max: 1000-1300 mm Control: Selogica Language: German Power: 68 kW Operating hours: 74,294 h Weight: 13500 kg Funnel: No Core Pull: Yes Euromap: Yes Air Valve: Yes
STVmachinery
