used Hydraulic Presses for sale

: neu : ca. 4 Monate ab Auftragse : Italien : 160000 €: 3152 €: 300 to: 500 mm: 4.000 x 2.550 mm: 700 mm: 20 mm/s: 2 mm/s: 3550 mm: 4000 mm: 2600 mm: 15000 kg: horizontal verschiebbar : 2550 mm: 1.900 mm: 2.900 mmHORIZONTAL MOVABLE CYLINDER1.900 MMHYDRAULICALY MOVABLE STAND 2.900 MMcontrol by levers as well as control paneltable with integrated cylinder to lift the workpieceaccording to CE regulations user manual in GERMAN and ENGLISH(sample photo)The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: neu : ca. 4 Monate ab Auftragse : Italien : 190000 €: 3743 €: 300 to: 500 mm: 5.000 x 3.050 mm: 700 mm: 20 mm/s: 2 mm/s: 4000 mm: 5000 mm: 2600 mm: 18000 kg: horizontal verschiebbar : 3050 mm: 2.200 mm: 3.600 mmHORIZONTAL MOVABLE CYLINDER 2.200 MMHYDRAULICALY MOVABLE STAND 3.600 MMcontrol by levers as well as control paneltable with integrated cylinder to lift the workpieceaccording to CE regulations user manual in GERMAN and ENGLISH(sample photo)The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: neu : ca. 4 Monate ab Auftragse : Italien : 218000 €: 400 to: 500 mm: 4.000 x 2.550 mm: 700 mm: 20 mm/s: 2 mm/s: 4000 mm: 4000 mm: 2600 mm: 20500 kg: horizontal verschiebbar : 2550 mm: 1.800 mm: 2.900 mmHORIZONTAL MOVABLE CYLINDER 1.800 MMHYDRAULICALY MOVABLE STAND 2.900 MMcontrol by levers as well as control paneltable with integrated cylinder to lift the workpieceaccording to CE regulations user manual in GERMAN and ENGLISH(sample photo)The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: neu : ca. 4 Monate ab Auftragse : Italien : 258000 €: 400 to: 500 mm: 5.000 x 3.050 mm: 700 mm: 20 mm/s: 2 mm/s: 4500 mm: 5000 mm: 2600 mm: 24000 kg: horizontal verschiebbar : 3050 mm: 2.200 mm: 3.600 mmHorizontal verschiebbarer Zylinder2.200 mmHydraulisch beweglicher Ständer: 3.600 mmBedienung über Handhebel sowie BedienpanelTisch mit integriertem Zylinder zum anheben des WerkstücksAusrüstung gemäß CE Vorschriften Betriebsanleitung in DEUTSCH und ENGLISCH(Symbolfoto)The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: neu : ca. 6-8 Wochen ab Auftrag : Italien : 500 to: 500 mm: 5.000 x 2.550 mm: 700 mm: 18 mm/s: 3 mm/s: 5000 mm: 5000 mm: 3000 mm: 32000 kg: horizontal verschiebbar : 2550 mm: 1.700 mm: 3.600 mmHORIZONTAL MOVABLE CYLINDER 1.700 MMHYDRAULICALY MOVABLE STAND 3.600 MMcontrol by levers as well as control paneltable with integrated cylinder to lift the workpieceaccording to CE regulations user manual in GERMAN and ENGLISH(sample photo)The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: neu : ca. 6-8 Wochen ab Auftrag : Italien : 600 to: 500 mm: 6.000 x 2.550 mm: 700 mm: 18 mm/s: 3 mm/s: 5000 mm: 6000 mm: 3000 mm: 43000 kg: horizontal verschiebbar : 2550 mm: 2200 mm: 4600 mmHORIZONTAL MOVABLE CYLINDER 2.200 MMHYDRAULICALY MOVABLE STAND 4.600 MMcontrol by levers as well as control paneltable with integrated cylinder to lift the workpieceaccording to CE regulations user manual in GERMAN and ENGLISH(sample photo)The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

pressure: 250 tdistance between columns: 0 mmstroke: 0 mmtotal power requirement: 0 kWweight of the machine ca.: 0 tdimensions of the machine ca.: 0 mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

SMG DS 315-1500/1300 CNC hydraulic press was manufactured in 1984 in Germany. The machine, consisting of two interconnected stations, is used for pressing metal workpieces in manual, semi-automatic and automatic mode with a pressing force of up to 315 tonnes. All the machine’s machining parameters are set using a CNC control with a full-colour, touchscreen display. The press is equipped with a hydraulic and pneumatic sheet metal feeder, servo drives for feed rollers to set a very precise stroke of up to 0.1 mm, safety cages and workpiece feed and drop control sensors. The SMG 315 T machine underwent a complete overhaul in 2007, during which components such as pumps and safety installations were replaced. Technical data of the SMG DS 315-1500/1300 press - maximum press force: 315 t - working table dimensions (L x W): 1500 x 1300 mm - upper machine point (from the table): 750 mm ...

Cold stamping press Stanko P 0443 Capacity, tons: 2000 Nominal liquid pressure, kg/cm²: 320 Table size, mm: 1000 x 1000 Table stroke, mm: 500 Table speed, mm/s: 0,14 Rapid table speed, mm/s: 3,1 Distance between columns, mm: 1090 Shut height, mm: 800 Hydraulic drive motor, kW: 5,5 Voltage, V: 380 Frequency, Hz: 50 Press dimensions, mm: 2575 x 1500 x 3285 Press weight, kg: 27000 Price 21500 EUR

Brand NN Model: hydr hose press 8 - 63mm Year of construction: 2022, Unused Dimensions LxWxH (mm) 850 x 600 x 1320 Number of stucco in stock multiple Made in China Ø Diameter (mm) 8 to 63 Comments. Crimp from 8 to 63mm 2. Maximum opening: 120mm 3. Operating mode: manual transmission, automatic pedal 4. Largest Press Force: 600 tons 5. Oil Pump Pressure: 31.5 Mpa. 6. Electric Motor Power: 3 kw 7. Standard Voltage: 380v 8. 11 sets (8, 15, 19, 23, 26, 31, 36, 41, 47, 55, 63) 9. Weight: 300kg 10. Dimensions LxWxH: 680mm X 750mm X 1000mm 11. Press precision: 0.01mm 12.Tank: 60L 13. Oil pressure: 5ml/wheel 14. Noise: 65dB Conditions of sale As / is, no guarantee from seller

Description: Worktop dimensions: approx. 660 x 400 mm (bottom) Upper worktop (passage): approx. 370 x 400 mm With SICK safety deviceApprox. Onsite Dimension. (l x w x h): 1,200 x 1,100 x 2,100 mm, weight approx.: 1,500 kg

Hydraulic press

-Dimensions: 1100 x 1300 x 2150 mm -Table size: 540 x 380 mm -Stroke: 130 mm -Voltage: 380 V -Electrical power: 7.5 kW

Description: Electric connection: 380V/50Hz Pressing force approx.: 63tMax. pressing force: 63 to, Approx. Onsite Dimension. (l x w x h): 2,100 x 1,100 x 2,200 mm, weight approx.: 2,000 kg

Hydraulic press PYE 100S1.

Hydraulic press PYE 160SS

Description: Table surface area approx.: 2000x600 mm Approx. Onsite Dimension. (l x w x h): 2,200 x 1,000 x 1,500 mm, weight approx.: 3,500 kg, table surface area l x w : 2000x600 mm

Fully European, professional workshop electric press with a pressure of 100t. Made of the highest quality steel, it ensures maximum precision of work during manual or automatic operation. The press has two speeds of operation - the piston at idle (without load) descends very quickly to the workpiece - while when a load is detected, the pump automatically switches to the working mode - slower and precise. Equipped with an adjustable work table and an electric pump. Precision is ensured by a robust hydraulic system and perfectly balanced, robust components. Viber-System workshop electric presses are a must-have in every professional workshop that appreciates precise and fast work. Model Specification WP100HPRK: Model: WP100HPRK Press force: 100 tons Max. pressure 320 bar Piston stroke: 400mm Oil tank capacity: 27l No-load speed (idle): 16mm/sec Piston return speed: ...

PRESS DESIGN  drive system: hydraulic   frame design: C-frame, single sided   table cushion: yes PRESS FORCES  total force (nominal): 160 toPRESS TABLE  table surface (left-right): 1250 mm  table surface (front-back): 600 mm  thickness of bolster plate: 100 mmSLIDE  table surface (left-right): 750 mm  table surface (front-back): 450 mm  stroke: 500 mmSLIDE (HYDR. PRESS)  approximation velocity max.: 200 mm/s  return velocity max.: 250 mm/sTOOL ASSEMBLY DIMENSIONS  distance table - slide max.: 800 mm  throat (C-frame): 360 mmELECTRICAL SPECIFICATIONS  total power consumption: 20.5 kW  mains voltage: 380 V  mains frequency: 50 HzDIMENSIONS / WEIGHTS  space requirements -left/right-: 1250 mm  space requi ...