Inv. Num. : 8331 Type: SKR 1200-NC Producer: REFORM Created: 1995 Parameters: Control system: Siemens SINUMERIK Max. workpiece diameter: 1200 mm Maximum length of the workpiece: 1000 mm Max. workpiece weight: 300 kg Max. speed: 1000 1/min Length: 2500 mm Width: 1500 mm Height: 1800 mm Weight: 4000 kg
Inv. Num. : 8195 Type: AR35 Type 11 Producer: Reform Created: 1998 Parameters: Control system: Sinumeric 805 Magnet: 3500 x 700 mm Machine height: 3000 mm Machine length: 8800 mm Machine width: 2250 mm Machine weight: 28000 kg
Inv. Num. : 7466 Type: AR61 Producer: Reform Created: 1988 Parameters: Control system: Simatic Table length: 2500 mm Table width: 600 mm Machine height: 2400 mm Machine length: 11000 mm Machine width: 3200 mm Machine weight: 22000 kg 2021: Conversion of the control system to Simatic and overhaul of the Z-axis
Knife sharpening machine clamping length 820mm V 380 kW 0.75
Machine number: 3728-87 Grinding length 2000 mm (Roll grinding machine)
bore capacity in steel (diameter): 50 mm throat: 300 mm bore stroke: 250 mm spindle diameter: 60 mm spindle taper: MK 5 spindle turning speed range: 18 - 1400 U/min no. of turning speeds: 12 Stufen feeds: 0,1 - 1,6 mm/U number of feeds: 9 Stufen table surface area: 500 x 500 mm spindle drive: 4 kW total power requirement: 4,2 kW weight of the machine ca.: 1,5 t dimensions of the machine ca.: 1,2 x 0,8 x 2,55 m Bench drill with - Forward/reverse rotation - Thread cutting - Coolant - Emergency stop The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
A knife surface grinding machine Reform without coolant, separation and filtration system is available. Grinding length: 1300mm, magnetic table dimensions X/Y/Z: 1350mm/150mm/1300mm, grinding spindle power: 5.5kW, table swivel: +/-90°, machine dimensions X/Y/Z: approx. 3000mm/1000mm/1500mm, weight: approx. 1500kg. Documentation available. An on-site inspection is possible.
Drilling capacity steel/cast iron: 50mm/60mm, spindle axis-column distance min./max.: 350mm/1600mm, spindle end-working surface distance: 350mm-1250mm, horizontal traverse: 1250mm, column arm vertical travel: 580mm, column diameter: 350mm, arm swivel: 360°, speed: 2000rpm, spindle travel: 315mm, torque: 392Nm, feed force: 15.6kN, machine dimensions X/Y/Z: approx. 2500mm/1250mm/3250mm, weight: approx. 3500kg. The coolant pump, the seal retainer and the measuring system are defective. Documentation available. An inspection on site is possible.
A Reform CNC rotary table surface grinding machine is available. Segment head: 560mm, segment dimensions X/Y/Z: 94mm/38mm/180mm, number of segments: 10, segment head speed: 720rpm, rapid traverse: 2m/min. Rotary table diameter: 900mm, rotary table speed: 40rpm, new segment working height: 400mm, control: Siemens 805, operating hours: 55800h. Documentation available. On-site inspection is possible.
thread dia.: 20 - 80 mm grinding length: 3500 mm thread pitch: . mm threading lenght min./max.: 50/3500 mm centre height: 400 mm workpiece length - max.: 4000 mm control: Siemens 840-Dsl feed speed u-axis: 0 - 2500 mm/min feed speed w-axis: 0 - 2500 mm/min feed speed b-axis: 100 1/min total power requirement: 45 kW weight of the machine ca.: 24 t dimensions of the machine ca.: 10,7 x 4,6 x 2,9 m Thread Grinding Machine / Profile Grinding Machine, suitable for: - the thread grinding of single and multi-start ball screws with gothic profiles and special profiles - Ø 20 to 80 mm with a grinding wheel Ø of 350 to 500 mm - length between the centers up to max. 4000 mm Equipment / Accessories: - grinding spindle: - capacity 14 kW - with a grinding wheel diameter range of 350-500 mm, cutting speeds between 20 and 75 m/s can be set. - grinding wheels: - diameter new 500 mm - diameter ...
grinding length: 5200 mm grinding width: 1300 mm workpiece height: 320 mm Control: Siemens 840 D main drive: 306 kW total power requirement: 380 kW weight of the machine ca.: t dimensions of the machine ca.: 11,21 x 3,2 x 3,85 m CNC production surface grinding machine with segment head Grinding length 5200 mm Grinding width 1300 mm Workpiece height 320 mm Control Siemens 840 D Passage width 1300 mm Grinding height 320 mm Grinding motor 306 kW Grinding motor speeds up to 320 rpm Grinding motor feed, infinitely variable 0.5-35 m/min Grinding motor infeed in steps of 0.002-1 mm Grinding motor infeed continuously stepless upto 5 mm/min Space requirement approx. 11.21 x 3.2 x 3.85 m Including accessories. - Coolant system - Magnetic clamping device - Switch cabinet - Oil mist extraction - Documentation Dimensions (length x width x height): Bed: 11200 x 2400 x 1600 mm, weight 28000 kg Grindin ...
grinding length: 4200 mm grinding width: 1300 mm workpiece height: 550 mm Control: SIEMENS 840 D magnetic clamping plate: 4200 x 1300 mm segment head diameter: 1400 mm grinding motor turning speeds up to: 320 U/min. grinding motor: 306 kW weight of the machine ca.: 50,0 t dimensions of the machine ca.: m Segment dimensions: 120/106 x 41 x 250 mm Number of segments: 1 set = 26 pieces Grinding motor feed: 0.5 - 35 m/min, infinitely variable Grinding motor feed: - in steps: 0.002 - 1 mm continuous: up to 5 mm/min. infinitely variable Equipment: CNC-control SIEMENS Sinumerik 840 D Automatic hydr. swivelling of the grinding motor from hollow to cross grinding NC-controlled adjustment of the Marposs measuring head by means of precision support. - new grinding dimensions can be entered into the control, whereby the the grinding head automatically adjusts to the corresponding height. Dresser ...
grinding length: 6100 mm grinding width: 350 mm workpiece height: 300 mm Control: total power requirement: 75/92,5 kW weight of the machine ca.: 20 t dimensions of the machine ca.: 12.500 x 1.800 x 2.600 m Brand Reform Machine no 2050-SL377 Type AR 61 Type 8/CNC CNC Brand Siemens CNC Type Sinumerik 805 Year of make 1997 Machine weight 20.000 kg Horizontal Grinding length 6.100 mm grinding width 350 mm Grinding height 300 mm Engine power 75 / 92.5 Kw Automatic depth feed Grinding stone diameter 600 mm ø Magnetic plate size 5x 1.200 x 350 mm Cooler with magnetic filter Machine size (lxwxh) 12.500 x 1.800 x 2.600 mm 5x Magnetic plate, adjustable in degrees. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
bore capacity in steel (diameter): 50 mm throat: 365 mm bore stroke: 230 mm spindle diameter: 60 mm spindle taper: MK 4 spindle turning speed range: 54 - 1032 U/min no. of turning speeds: 9 Stufen feeds: mm/U table surface area: 620 x 520 mm total power requirement: 3,5 kW weight of the machine ca.: 0,9 t dimensions of the machine ca.: 1,2 x 0,8 x 2,45 m Pillar drill with - Left/right rotation - Machine light - Coolant - Emergency stop device The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
grinding length: 4200 mm grinding width: 1300 mm workpiece height: 550 mm Control: Siemens 840D passage width: 1300 mm electro-magnetic table: 4200 x 1300 mm grinding height: 550 mm grinding motor: 306 kW grinding motor turning speeds up to: 370 U/min grinding motor feed, infinitely variable: 0,5-35 m/min coolant flow rate: 2000 l/min weight of the machine ca.: 50 t dimensions of the machine ca.: 11,21 x 5,25 x 3,85 m Equipment / Accessories: - segment head - diameter 1400 mm - for segment dimensions 120/106 x 41 x 250 mm - number of segments: 1 set = 26 pieces - grinding motor adjustment - in steps: 0,002 - 1 mm - continuous: up to 5 mm/min stepless The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
