subcategories
(3rd category level)
Manufacturer:
(Category: 112)
ratio of transmission: 10:1 min. number of teeth: 3 max. number of teeth: 200 range of tooth size: 20 mmtooth width max.: 58 mmdiameter of tools min: 69,85 mmdiameter of tools max.: 230 mmx-axis: 325 mmy-axis: 350 mmz-axis: 470 mmwork piece table - Ø: 212,71 mmb-axis: + 90,1 / - 1 °Control: SIN 840 D SIEMENStotal power requirement: 75 kWweight of the machine ca.: 10.000 Kgdimensions of the machine ca.: 6,10 x 4,40 x 3,30 mWAGURIwith EWAB load cell built in 2012(Linear loader)no coolant filter system available The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Complete production line for bevel gears, consisting of 6 bevel gear milling machines Klingelnberg BF 201 including orders for contract work for sale Technical data Diameter: 240 mm Module: 10 mm Tooth width: 60 mm Dimensions: 2.3 x 2 x 1.7 m Machine weight: approx. 6,700 kg Information and data are non-binding, subject to prior sale Special features: Complete production line consisting of 6 machines with the following accessories: - Bevel gear machine - 1x interchangeable gear set - 1x test block - Mounts (proportionate) - Knife set (proportionate) - Documentation (1xOriginal / data set) Furthermore, contract gear orders could follow, catalogue goods and special bevel gear sets according to customer specifications, complete volume approx. 8,000 components / year. Asking price of the seller 18.000.- VB / per machine
Key data: 540
The Klingelnberg GKP 90 bevel gear testing machine was designed as a universal machine and is used by manufacturers of gears and transmission technologies, for the process of noise and contact pattern tests on bevel gears and hypoid gears. Technical data Diameter: 540 (400) mm Hypoid: ±50 mm mm Pinion spindle Dm: 90 mm mm Dimensions: 1,800 x 1,800 x 1,600 m Machine weight: approx. 2,800 kg Information and data are non-binding, subject to prior sale Special features: The machine is intended for noise and contact pattern tests on bevel and hypoid gears of all gears. By simulating operating conditions, applying different speeds and changing the load states for drive and outlet, the optimal installation distance for standstill can be determined. Digital actual value display for 2 axes Stepless speed adjustment via frequency converter Electrically fused and acceptabl ...
Key data: 450
The Klingelnberg PEK 300 H bevel gear testing machine is designed for universal single-flank rolling testing of bevel gears and crown gears. Here, gears can be measured and graphically evaluated by means of single-flank rolling testing. These test methods are particularly suitable for determining defects in the gear geometry such as concentricity and axial running properties, rolling deviations or pitch errors. Here, a practical installation situation of a gear outside the gearbox is simulated under real load conditions and then evaluated. Deviations in the gear geometry, machining errors due to defective tools and damage to the gears can thus be detected and eliminated even before assembly. The following parameters can be measured here: » Single-flank deviations Fi', fi', fl', fk' » Crossing, Runout Roundness (Option) » Carrying diagram with digital camera » ...
max. wheel diameter: 180 mmgear width: ca. 220 mmmax. module: 3 / 5 mmControl: Siemens 840D sl max. radial velocity: 5000 mm/minmax. workpiece diameter: 180 mmtable rotation speed: 800 U/mintable diameter: 145 mmaxial travel: 250 mm mmback rest:: axial travel: 300 mmclamping force max.: 13 kNmilling head:: swivelable +/-: 45 °drive capacity: 23 kWturning speeds: 6000 U/mindiameter of tools max.: 90 mmtool clamping length max.: 211 mmmodule hobbing max.: 3 module profile milling max.: 5 tangential speed max.: 7500 mm/minweight of the machine ca.: 9,5 tdimensions of the machine ca.: 4,5 x 3,5 x 2,7 mEquipment / Accessories:- The machine is equipped for dry milling.- workpiece magazine- parallel gripper: - workpiece weight form-fit max. 15 kg - workpiece length max. 400 mmThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
hobbing length: 1750 mmmilling width: 260 mmmax. module: 10 mmtable size incl. water gutter: 460 x 2100 mmtable clamping surface:: 250 x 1850 mmcutter width - max.: 100 mmfeed of the milling slide, stepless: 0 - 500 mm/min.rapid traverse feeds: 3000 mm/minmilling head -swivable +/-: 30 °Rotation speed range of milling head, in 9 steps: 29 - 178 rpmMilling head swivable 2 sides helical gearcutting: 30 °total power requirement: kWweight of the machine ca.: 4 tdimensions of the machine ca.: 4 x 1,85 x 1,85 mEquipment/accessories- 7 vices- change wheels - Clamping devices- DocumentationThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
The machine is in good technical condition, testing is possible by prior arrangement.
The machine is in good technical condition, testing is possible by prior arrangement.
The machine is in good technical condition, testing is possible by prior arrangement.
The machine is in good technical condition, testing is possible by prior arrangement.
max. wheel diameter: mmgear width: mmmax. module: 0min. module: 0total power requirement: kWweight of the machine ca.: trequired space: mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
max. wheel diameter: mmgear width: mmmax. module: 0min. module: 0total power requirement: kWweight of the machine ca.: trequired space: mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
max. wheel diameter: mmgear width: mmmax. module: 0min. module: 0total power requirement: kWweight of the machine ca.: trequired space: mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
max. wheel diameter: 3000 mmgear width: 500 mmmax. module: 25 / 40 spindle turning speed range: 250 U/minfeed speeds: max. 4000 mm/minfaceplate diameter: 2000 mmtable bore diameter: 700 mmtable turning speeds: 51 U/minpower capacity - milling spindle: 53 kWdrive motor for milling spindle: - kWaxial adjustment: 1200 mmmilling head swivable ca.: +/- 45 °control: Siemens 840D total power requirement: - kWweight of the machine ca.: 55 t- CNC Control Siemens 840D- Internal Hob Head IFK- External Hob HeadThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
max. wheel diameter: 1250 mmgear width: 600 mmmax. module: 16 min. module: 2 tooth width: 490 mmZahnschrägungswinkel max.: 45 °shifting: 200 mmmax. number of teeth: 12 diameter of hob: 240 mmcutter length max.: 280 mmtable diameter: 1020 mmmilling spindle speeds (infinitely variable): 28 - 200 U/minpower capacity: 25 kWweight of the machine ca.: 16,2 tdimensions of the machine ca.: 4,5 x 4,6 x 2,7 mequipped with:- universal hob head- change gearsmachine has been partly overhauled (electrical and machnical) and is now with programmable, digital InfeedThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
max. wheel diameter: 2500 mmgear width: 750 mmmax. module: 18 / 22 min. module: table diameter: 1800 mmmin. number of teeth: 12 table hole: 300 mmhob turning speeds: 20 - 100 U/mintable load: 10 tmilling cutter dia. x width: 250 x 340 mmshifting: 150 mmfeeds - tangential: 0,25 - 3 mm/minfeeds - radial: 0,07 - 1,5 mm/minfeeds - longitudinal: 0,55 - 3,5 mm/minmilling feeds: 13,4 - 80 (Einzelteilen) mm/mintotal power requirement: ca. 30 kWweight of the machine ca.: 28 t- change gears, arbors, toolings, clamping plots- universal hob head- swiveling outer steady - single indexing deviceparty overhauled in 2023The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Machine : Gear Hob 1 set of gear hobs 20 pcs. Angle of engagement 20 degrees Module : Set all sizes M 1 2x M 3 M 1.25 M 3.25 M 1.5 2 x M 3.5 M 1.75 M 3.75 M 2 M 4 M 2.25 M 4.5 M 2.5 M 5 M 2.75 M 5.5 M 6 Gear hobs : M 1 , 20 degrees , φ 70x50, 80% M 1.5 20 degrees, φ 54x56, 90%, M 2 20 degrees, φ 72x72 90% M 2.5 20 degrees, φ 60x65, 80% M 4 20 degrees, φ 90x78, 80% M 2.5 20 degrees φ 78x190, 30% M 1.6 30 degrees, φ 85x130, 90% M 1.5875, 30, φ 82x120, 90% Other tools : See photo
: workpiece length - max.: mmmax. module: 0total power requirement: kWweight of the machine ca.: trequired space: mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
max. wheel diameter: 400 mmgear width: 250 mmmax. module: 8 min. module: 0,2 dist. between centers: 640 mmspindle turning speed range: 4010 U/minnumber of teeth: 5 - 999 max.helical angle: +/- 45 °root circle diameter: 10 mmslide stroke: Z-Achse 300 mmworkpiece weight: 300 kgclamping length max.: 700 mmclamping length min.: 60 mmpressure angle: 14 - 30 °Control: Siemens 840D spindle motor: 10 kWtotal power requirement: - kWweight of the machine ca.: 16 tdimensions of the machine ca.: 3,3 x 2,7 x 2,5 mGear grinding machine designed for small and large series productionwith:- Siemens Sinumerik 840 D CNC control- Tailstock- Balancing device- Oil mist extraction- Complete cladding- Double Spindle Dresser- Hoffmann filter system, type HSF 150The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
max. wheel diameter: mmgear width: mmmax. module: 3 min. module: internal dia. - max.: mminternal dia. - min.: mm: CNC workpiece length - max.: 130 mmcontrol: Siemens 840 D total power requirement: 20 kWweight of the machine ca.: 8 tdimensions of the machine ca.: 3 x 3 x 3 mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
max. wheel diameter: 300 mmmax. module: 8 min. module: 0,7 Control: SINUMERIK 840 D min/max. pitch cone angle: - 90 / + 90 °workpiece spindle - bore: 127 mmgrinding wheel diameter: 50 - 230 mmspindle speeds (infinitely variable): 7.500 U/minwork piece spindle speed: 700 U/mintotal power requirement: 146 kWweight of the machine ca.: 21 tdimensions of the machine ca.: 9,5 x 3,6 x 3,1 mMeasuring probefor tooth gap(integrated on the grinding head)External grinding spindle cooling systemELBARON oil mist extraction (integrated in the machine)Hoffmann coolant filter systemWas used for the serial production of spiral-toothed ring gearsNo clamping devicesNo grinding wheels / grinding wheel flangesNo dressing wheelsThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
ratio of transmission: 10:1 min. number of teeth: 3 max. number of teeth: 200 range of tooth size: 20 mmtooth width max.: 58 mmspindle speeds (infinitely variable): 6000 U/minwork piece spindle speed: 1200 U/mindiameter of tools max.: 230 mmdiameter of tools min: 69,85 mmx-axis: 325 mmy-axis: 350 mmz-axis: 470 mmb-axis: + 90,1 / - 1 °work piece table - Ø: 212,71 mmControl: SIN 840 D SIEMENStotal power requirement: 75 kWweight of the machine ca.: 10.000 Kgdimensions of the machine ca.: 6,10 x 4,40 x 3,30 mInternal probe Renishaw LP2 (axis X2,Y2)Hoffmann coolant filter system HSF 100SE/K (built in 2008)Tank capacity 2500LVT oil mist filter systemThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
max. wheel diameter: 1400 mmgear width: 400 mmmax. module: 25 min. module: 1 total power requirement: - kWweight of the machine ca.: 7,0 tdimensions of the machine ca.: 3,0 x 1,2 x 3,2 mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
max. wheel diameter: 1000 mmgear width: 180 mmmax. module: 7 min. module: 0,5 min. ram stroke: 16 mmmax. ram stroke: 180 mmtable hole: 160 mmtotal power requirement: 4 kWweight of the machine ca.: 5,2 tdimensions of the machine ca.: - mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
max. wheel diameter: 2500 mmgear width: 980 mmmax. module: 34 min. module: 2 grinding stroke stepless adjustable: 1000 mmroot circle dia. min.: 180 mmnumber of teeth: frei wählbar max.helical angle: 0 - 35 °grinding slide stroke: 20 / 200 U/mmgrinding wheel peripheral speeds:: 35 / 45 m/sgrinding wheel diameter: 340 / 435 mmgrinding motor: 22 kWpressure angle: 12,5 - 30 °table diameter: 1300 mmtable load capacity: 10000 kptable bore diameter: 300 mmdepth of hole: 300 mmroll feed: 0 - 1000 m/mintable diameter: 1300 mmworkpiece weight: 10000 kgclamping length: 2760 mmclamping height: 420 - 590 mmtable bore diameter: 280 mmdepth of hole: 300 mmControl: BWO H+K CNC 785 total power requirement: 79 kVAweight of the machine ca.: 40 tdimensions of the machine ca.: 7,3 x 7,9 x 4,5 m- 10 axis CNC control BWO H+K CNC 785 (2nd Generation from 2009)- integrated measurement system on the machine ...
max. dia. of teeth cutting: 2000 mmworkpiece dia.: 2700 mmmax. module: 22 mmRing thickness for internal gearing max.: 500 Control: Siemens 840D table diameter: 1500 mmtable hole: 500 mmTable rpm: 3,5 1/mintable load: 200 kNStroke length: 30-330 mmno. of strokes doubel-strokes per min.: 10 - 200 1/min.axis distance: 70 ... 1220 mmmax. radial velocity: 3000 mm/minweight of the machine ca.: 38000 kgEquipment/ accessories:- Intermediate plate between head and column: Center distance modified min. 0 mm max. 1500mm- column increased for axial stroke 1200 mm max. - Shaping head drive power 30 kW- spindle diameter 160mm- max. tool diameter 300mm- max. cutter wheel speed 10 1/min- Cutting speed 5 ... 45m/min- max. lateral offset 50mm- coolant device coolant tank capacity 2500 l- documentationThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
max. wheel diameter: 400 mmgear width: mmmax. module: Control: total power requirement: kWweight of the machine ca.: 4 tdimensions of the machine ca.: mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
