used Gear Hobbing Machines for sale

max. wheel diameter: 1600 mmgear width: 700 mmmax. module: 25 min. module: 2 x-axis: 875 mmz-axis: 1000 mmcontrol: Siemens 840 Cweight: 38 tmilling arbors: HSK-B160 table load: 15 to tarbor support: 900 verfahrbartotal power requirement: 100 kWweight of the machine ca.: 27 tdimensions of the machine ca.: 7,9 x 7,4 x 4,0 mSonderfräskopf M2- Max Fräserdurchmesser 350 mm- Max Fräserlänge 375 mm- Max Fräserverschiebung 300 mmThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Key data: 3000 mm, 32

1 CNC Gear Milling Machine Make: Gleason-Pfauter Model No.: P2001/3000 Year of manufacture: 1980 / Retrovit 2000 Largest milling diameter: 3000 mm Largest module: 32 Face plate diameter: 1920 mm Power main drive: 30 kw. max. workpiece weight: 25 tons. Equipment / Accessories: CNC control made by Siemens Internal gear milling head Setting Stick - Counter Holder Workpiece fixtures Interchangeable wheels various milling cutters various cutter mounts Conveyor

workpiece dia.: 80 mmmodule: 2,5 mmfixture slide travel: 220 mmControl: Siemens - Sinumerik 840 D max. milling cutter diameter: 100 mmcutter length max.: 160 mmturning speed range: 200 - 5.000 U/mintable turning speeds: 3.000 U/minGear Hobbing Machine - Horizontal | GLEASON-PFAUTER - P60equipped with magnetic chip conveyor for dry and/or wet machining.Furnishing:- attached exhaust system for dry processing: Ringler,- Noise insulation for dry milling machine- coolant device,The machine is in very good condition.For additional equipment information please referto the original order confirmation which is includedin the offer of this machine.- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -#Tags: P 60 | P-60 | Gleason Pfauter P60The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

workpiece dia.: 80 mmmodule: 2,5 mmfixture slide travel: 220 mmControl: Siemens - Sinumerik 840 D max. milling cutter diameter: 100 mmcutter length max.: 160 mmturning speed range: 200 - 5.000 U/mintable turning speeds: 3.000 U/minGear Hobbing Machine - Horizontal | GLEASON-PFAUTER - P60equipped with magnetic chip conveyor for dry and/or wet machining.Furnishing:- attached exhaust system for dry processing: Ringler,- Noise insulation for dry milling machine- with platform,- subindulgence,- subsequent loading and unloading handling: Epson - LS6-602S (built 2018),- sorting unit,- Calibration unit: Stotz, control: Siemens - HMI,- Work cell: Eagle AMZ, with workpiece tray,- position check,- exit conveyor belt,- Control cabinet, with cooling unit: Rittal- coolant device,- Automation unit: AMZ,The machine is in very good condition.For additional equipment information please referto the origin ...

workpiece dia.: 100 mmmodule: 3.0 mmfixture slide travel: 400 mmControl: Siemens - Sinumerik 840 D max. milling cutter diameter: 80 mmcutter length max.: 180 mmturning speed range: 50 - 12.000 U/mintable turning speeds: 3.000 U/minGear Hobbing Machine - Horizontal | GLEASON-PFAUTER - P90equipped with magnetic chip conveyor for dry and/or wet machining.Furnishing:- attached extraction system: Ringler,- with platform,- subindulgence,- subsequent loading and unloading handling: Epson - LS6-602S (built 2018),- sorting unit,- Calibration unit: Stotz, control: Siemens - HMI,- Work cell: Eagle - AMZ, with workpiece tray,- position check,- exit conveyor belt,- Control cabinet, with cooling unit: Rittal- Workspace,- tailstock,- measuring device,- refrigeration system,- Industrial robots: Epson,- goods carrier,- conveyor belts,- control panel,The machine is in very good condition.For additional e ...

MAX DIAMETER 640 MAX MODUL 8 TABLE DIAMEER 550

Gear hobber sharpener Kapp AS 305 B

GEAR HOBBING MACHINE MAKE: KARATS MODEL: GH-20H YEAR: 1984 Specification : Table dia. : 2000mm (Bore dia.: 300mm) Max. dia. : 3000/4300mm (HOB/SINGLE) Max.Module: M30/35 (HOB/SINGLE) Max.dia of hob: 380mm Max.Length of hob: 510mm Machine size: 7000 x 4100 x 4300 (L x W x H) Weight: Approx 45Ton

Circulation cutter from Klingelberg

KOEPFER 151 Gear Hobbing Machine - Horizontal Available 2 machines. Semi-automatic machine Max. gear dia 150 mm Module 2 Max Profile depth / Plunge cut depth 7 mm Max hobbing length 135 mm Max length of workpiece, approx. 280 mm Hob slide swivable 250 degrees Hob size dia x length 65 x 60 mm Hob shifting, manually max. 40 mm Hob Spindle speeds 140 – 1120 rpm Workspindle bore 24 mm Bore of collet chuck, max. 3 – 24 mm Feed range, axial/plunge cut 0.06 – 2 mm/rev No. of teeth, min./max. 6 - 200 Spindle Drive/Total electrical load, approx. 2,2 / 4 kW Weight, approx. 1,400 kg Very good condition

KOEPFER 153 Gear Hobbing machine Cutting diameter with loader 80 mm Cutting diameter without loader 142 mm Max. module 2 Cutting length 150 mm Workpiece length 300 mm Workpiece length with loader 220 mm Miller dimensions 70 x 71 mm Miller rotation speed 280 -2240 rpm Head inclination +/- 35° Dimensions : 1690 x 1410 x 1640 mm Weight 3t

For sale is the following machine: Second-hand machine Type Koepfer 173 SPS Built in 1989, completely revised in 2022 The machine is equipped with Klöckner Moeller PLC control. Machine color is green, RAL6011. Speed adjustment of the cutter is carried out with inverter and speed indicator. The number of teeth of the workpiece and differential is adjusted by means of interchangeable wheels. The machine is equipped with a shift milling head with automatic shifting. 2. Technical data max. module 2.5 max. workpiece diameter, manual loading 156 mm max. workpiece diameter, automatic loading 100 mm max. toothing length 150 mm max. workpiece length, for manual loading 360 mm max. workpiece length, for automatic loading 260 mm max. cutter diameter 63 mm max. cutter length 70 mm max. cutter displacement (shifting) 70 mm Partial gearbox 4:45 Cutter speed max. 1,100 -1 ...

CNC hobbing machine Manufacturer Koepfer EMAG Type K160 Year of construction 2018 diameter 100mm Longer1000mm 8 axis control Machine is in top condition

max. work piece diameter, mm 2000 max.work piece length, mm 500 table diameter, mm 1800 max. work piece weight, kg 10000 module 20 max. diameter of installed worm mills, mm 300 max. length of installed worm mills, mm 500 main motor power, kW 14 machine weight, kg app. 32000

Diameter capacity: 2000 mm; Maximum module: 20 mm; Max. work piece weight, kg 10000 Width of the gear: 560 mm; Spindle speed range, rpm 8...125 Main motor power: 15 kW Dimensions: mm 6910x2990x3460 Weight: 31 800 kg

Komsomolec 5K328A Gear hobbing machine Max. work piece diameter 1250 mm Max. work piece diameter with support 850 mm Table diameter 1000 mm Module 12 Max. table load 2000 kg Min. number of processed teeth 20 Max. length of processed teeth mm: - straight 560 - 30 degrees angle 400 Main drive power 10 kW Machine dimensions 3560x1790x2590 mm Machine weight 14000 kg

Hobbing machine Manufacturer Liebherr Type L400 diameter 400mm module 8 Machine is in a used good condition Incl. documentation and interchangeable wheels

max. wheel diameter: 3000 mmgear width: 500 mmmax. module: 25 / 40 spindle turning speed range: 250 U/minfeed speeds: max. 4000 mm/minfaceplate diameter: 2000 mmtable bore diameter: 700 mmtable turning speeds: 51 U/minpower capacity - milling spindle: 53 kWdrive motor for milling spindle: - kWaxial adjustment: 1200 mmmilling head swivable ca.: +/- 45 °control: Siemens 840D total power requirement: - kWweight of the machine ca.: 55 tdimensions of the machine ca.: - m- CNC Control Siemens 840D- Internal Hob Head IFK- External Hob HeadThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

CNC GEAR HOBBING MACHINE LIEBHERR LC 3000 FN Year: 2010 Control : SIMENS 840D Table diameter: 2600mm Max. workpiece diameter: 3000mm Table hole: 700mm Max. table speed: 5 RPM Center distance with external cutter head: 210…2100mm Center distance with internal cutter head: 0…1800mm Workpiece load: 300kN Max. axial travel: 1200mm Cutter head swiveling angle: +/-45 degrees Original table size is 2000mm, but the factory made a new sub table and put it on top of the original table and used it. Including external milling head, chip conveyor. All manual books available. Low working hours. Excellent working condition.

max. wheel diameter: 250 mmmin. number of teeth: 6 max. module: 6 max. workpiece diameter: 255 mmspindle turning speed range: 6-600 U/minControl: Siemens milling head -swivable +/-: 45 °milling spindle motor: 9,8 kWtable diameter: 250 mmtotal power requirement: kWweight of the machine ca.: 6,7 tdimensions of the machine ca.: mgear width: mmThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Module 6.00 mm Cylindrical / profile grinding module 14.00 / 8.00 mm Workpiece diameter 380 mm Axial travel 1,000 / 600 mm Shift travel 320 mm Hob speed 12,000 min-1 Tool diameter 170 / 320 mm Tool length 230 mm

Key data: 255 mm, 6

Have to hand over a CNC hobbing machine Liebherr LS 255. Year of manufacture 1991 Control Siemens

max. wheel diameter: 300 mmgear width: 250 mmmax. module: 5 max. workpiece diameter: 290 mmtip circle diameter: 130 mmcutter length max.: 220 mmtaper: Steilkegel ISO 40 milling arbors: D= 22,27,32,40 slide travel X-axis: 185 mmslide travel Z-axis: 200 mmslide travel Z-axis: 400 mmcontrol: SINUMERIK 840C deburring device: 1 feed speeds: X= 1-10000 mm/minfeed speeds: Z= 1-5000 mm/minspindle turning speed - stepless: Werkzeug 125-1250 U/minclamping table diameter: 300 mmtable turning speeds: 2 - 110 U/mintotal power requirement: 48 kVAweight of the machine ca.: 9,5 tdimensions of the machine ca.: 6,00 x 2,9 x 3,55 mParticularly suitable for straight and inclined cylinder wheels- Motorized milling head- CNC control Siemens 840Capprox. 87000h operating hoursThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

max. wheel diameter: 400 mmgear width: 290 mmmax. module: 6 min. module: 0,5 weight: 4,6 tvoltage: 220/380 Vfrequency: 50 Hzdimensions: 3010 x 1800 x 2200 mmtotal power requirement: 17 kWWorking area:1. largest module to be milled 6 mm2. straight toothing a) Largest workpiece Ø 400 mm b) Largest length of toothing 290 mm3. smallest number of teeth to be milled for 1-speed sub-gear 6 with 2-speed gearbox 3Dimensions:1. Ø of the workpiece table 400 mm2. Ø of the table dimensions 80 mm3. diameter of the workpiece mandrel 36 mm4. largest clampable milling cutter: Ø diameter 160 mm Length 160 mm5. diameter of the milling cutter arbour 32, 406. centre distance between milling cutter and workpiece a) Largest distance 300 mm b) Smallest distance 30 mm7. drive cone for milling arbors MK 48. maximum milling cutter displacement: a) Tangential milling 120 mm b) Shifti ...

max. wheel diameter: 400 mmgear width: 290 mmmax. module: 6 min. module: 0,5 weight: 4,6 ttotal power requirement: 17 kWWorking area:1. largest module to be milled 6 mm2. straight toothing a) Largest workpiece Ø 400 mm b) Largest length of toothing 290 mm3. smallest number of teeth to be milled for 1-speed sub-gear 6 with 2-speed gearbox 3Dimensions:1. Ø of the workpiece table 400 mm2. Ø of the table dimensions 80 mm3. diameter of the workpiece mandrel 36 mm4. largest clampable milling cutter: Ø diameter 160 mm Length 160 mm5. diameter of the milling cutter arbour 32, 406. centre distance between milling cutter and workpiece a) Largest distance 300 mm b) Smallest distance 30 mm7. drive cone for milling arbors MK 48. maximum milling cutter displacement: a) Tangential milling 120 mm b) Shifting 100 mmThe data for this ad was created with ModulMWS - the software solu ...

max. wheel diameter: 400 mmgear width: 290 mmmax. module: 6 min. module: 0,5 weight: 4,6 tvoltage: 220/380 Vfrequency: 50 Hzdimensions: 3010 x 1800 x 2200 mmtotal power requirement: 17 kWWorking area:1. largest module to be milled 6 mm2. straight toothing a) Largest workpiece Ø 400 mm b) Largest length of toothing 290 mm3. smallest number of teeth to be milled for 1-speed sub-gear 6 with 2-speed gearbox 3Dimensions:1. Ø of the workpiece table 400 mm2. Ø of the table dimensions 80 mm3. diameter of the workpiece mandrel 36 mm4. largest clampable milling cutter: Ø diameter 160 mm Length 160 mm5. diameter of the milling cutter arbour 32, 406. centre distance between milling cutter and workpiece a) Largest distance 300 mm b) Smallest distance 30 mm7. drive cone for milling arbors MK 48. maximum milling cutter displacement: a) Tangential milling 120 mm b) Shifti ...

max. wheel diameter: 630 mmgear width: 375 mmmax. module: 10 clamping table: 550 mmtable hole: 125 mmmilling spindle speeds infinitely variable: 62 - 390 U/mintaper: MORSE 5 axial-feeds: 0,40 - 6,80 mm/Uradial feeds: 0,10 - 1,76 mm/Udist. cutter spindle - workpiece spindle: 50 - 425 mmno. of teeth: min. 8 milling cutter dia. x width: 192 / 215 mmshifting: 200 mmmain drive motor: 7,5 kWtotal power requirement: 21 kVaweight of the machine ca.: 8,2 tMain features:-Universal hob head with tangential movement-Automatic shifting-Automatic dwell attachment-Hydraulic clamping in table-Pressure reduce valve for outer steady-Magnetic swarf conveyorAccessory:1 set of tools for operating and maintenance1 set differential gears, module 1,751 set indexing change gears module 2,51 change gear cabinetThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

MAX DIAM 320 , MAX MODUL 8

Gear hobbing machine STAEHELY mod. SH25US + n. 2 Basket sanders D 1700 and D 1400

Gear hobbing machine 53A50H, STANKO, with change gears

Gear hobbing machine STANKO 5B312 with change gears.

Max wheel diameter 800 mm  Module + 10 Max. spindle speed 310 rpm Max. gear width 350 mm  Motor power 7.5 kw Dimensions 2550 mm × 1510 mm × 2000 mm Weight 7,2 ton.

Max work-piece diameter: 1250 mm Max work-piece diameter: -With support: 850 mm -Without support: 1350 mm Max module: 12 Table diameter: 935 mm Max work-piece of producing: 2000 kg Milling length with vertical plunge cutting: 560 mm Min number of teeth machined: 20 Distance between Cutter axis and: -Arbor: 115-820 mm -Table: 230-880 mm Main motor power: 10 kW Overall dimensions: 3560x1790x2590 mm Machine weight: 14000 kg

Gear hobbing machine OFE 22, with accessories

Key data: 460 mm, 10

BEVEL GEAR SPIRAL GENERATOR

Hobbing machine Manufacturer WMW Type ZFWZ 1250 x 14 diameter 1250mm module 14 Machine is in a used good condition. Ink. Documentation and interchangeable wheels

Gear Hobber WMW MODUL ZFWZ 1500 x 15

max diam 340 , max modul 8

Code 151301 DESCRIPTION Gear Hobber Ø 250 x modul 6 Make Modul Model ZFWZ 250/3 Serial number 112 625 Year ± 1983 Ma. Workpiece diameter 250 mm Max. modul 6 Max. axialmovement 275 mm Max. tangential movement 100 mm Max. gearangle setting 45 degrees Max. diam. millingcutter 145 mm Max. millingcutter length 170 mm Diameter clampingtable 275 mm Diameter tablcenter positioning 200 mm Distance millingcutter to clampingsurface min/max. 195 – 470 mm Distance middle millingcutter to center table 20 – 230 mm Millingspeeds in steples in 2 Ranges 20 – 200 rpm 125 – 400 rpm Feeds axial 0.2 – 100 mm/wheel/rounds radial 0.025 – 4 mm/wheel/rounds tangential 0.1 – 5 mm/wheel/rounds Power main motor 7.5 kW – 380 Volts Power connection 22 kVA Accessories Chipconveyor All spee ...

Key data: 250 , 400 , 10

The machine needs to install the new electric system Specification: Work table diameter 580 mm Gear diameter 630- 710 mm Gear width 400 mm Module range 1-10 Max. axial feed travel 400 mm Max. tangential feed travel 200 mm Max. helix angle 45 degrees Min. number of teeth hobbed 10 Min. number of teeth hobbed (indexing drive) 5 Max. hob diameter 200 mm Max. hob length 250 mm Diameter of hole in table 100-250 mm Depth of hole in table 45-300 mm Distance center of hob to table 175-575 mm Distance center of hob to center of table 50-505 mm Driving taper for hob arbor (step taper) 50 mm Hob speeds of universal hobbing head steeped 50-400 rpm Milling spindle speeds 40-400 rpm Axial feeds 0,2-10 mm/rev Tangential feeds 0,1-5 mm/rev Radial feeds 0,1-1 mm/rev Main motor capacity 29 kW Direct current 10 kW Machine dimensions 3380x2715x2250 mm Machine weight 9200 kg

[ 5000 characters max., no information about the advertiser ] Brand:MODUL Model:ZFWZ 2000/3 Type:Gear Hobbers Year:1981 Location:Czech Republic Specification: Max diameter of gear without tailstock 2100 mm Max diameter of gear with tailstock 1450 mm Max face of gear 1060mm Max module with hobbing head 22 Max/ Min center distance 1240/150 mm Min number of teeth 10 Max pressure angel 45 deg Table dia / number of slots 1800 mm/12 Bore in table / length 600/800 mm Max dia of hob / length 300/330 mm Max weight of workpiece 15000 kg Accessories: Standard milling head Tailstock (no clamping) Set of gear supports (shoes) Set of arbors Set of change gears