used
Key data: 400 mm
good working condiiton,
max. wheel diameter: 3000 mmgear width: 500 mmmax. module: 25 / 40 spindle turning speed range: 250 U/minfeed speeds: max. 4000 mm/minfaceplate diameter: 2000 mmtable bore diameter: 700 mmtable turning speeds: 51 U/minpower capacity - milling spindle: 53 kWdrive motor for milling spindle: - kWaxial adjustment: 1200 mmmilling head swivable ca.: +/- 45 °control: Siemens 840D total power requirement: - kWweight of the machine ca.: 55 t- CNC Control Siemens 840D- Internal Hob Head IFK- External Hob HeadThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Gear hobbing machine TOS OF-71 with change gears
max. wheel diameter: 1250 mmgear width: 600 mmmax. module: 16 min. module: 2 tooth width: 490 mmZahnschrägungswinkel max.: 45 °shifting: 200 mmmax. number of teeth: 12 diameter of hob: 240 mmcutter length max.: 280 mmtable diameter: 1020 mmmilling spindle speeds (infinitely variable): 28 - 200 U/minpower capacity: 25 kWweight of the machine ca.: 16,2 tdimensions of the machine ca.: 4,5 x 4,6 x 2,7 mequipped with:- universal hob head- change gearsmachine has been partly overhauled (electrical and machnical) and is now with programmable, digital InfeedThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Machine : Gear Hob 1 set of gear hobs 20 pcs. Angle of engagement 20 degrees Module : Set all sizes M 1 2x M 3 M 1.25 M 3.25 M 1.5 2 x M 3.5 M 1.75 M 3.75 M 2 M 4 M 2.25 M 4.5 M 2.5 M 5 M 2.75 M 5.5 M 6 Gear hobs : M 1 , 20 degrees , φ 70x50, 80% M 1.5 20 degrees, φ 54x56, 90%, M 2 20 degrees, φ 72x72 90% M 2.5 20 degrees, φ 60x65, 80% M 4 20 degrees, φ 90x78, 80% M 2.5 20 degrees φ 78x190, 30% M 1.6 30 degrees, φ 85x130, 90% M 1.5875, 30, φ 82x120, 90% Other tools : See photo
max. wheel diameter: 2500 mmgear width: 750 mmmax. module: 18 / 22 min. module: table diameter: 1800 mmmin. number of teeth: 12 table hole: 300 mmhob turning speeds: 20 - 100 U/mintable load: 10 tmilling cutter dia. x width: 250 x 340 mmshifting: 150 mmfeeds - tangential: 0,25 - 3 mm/minfeeds - radial: 0,07 - 1,5 mm/minfeeds - longitudinal: 0,55 - 3,5 mm/minmilling feeds: 13,4 - 80 (Einzelteilen) mm/mintotal power requirement: ca. 30 kWweight of the machine ca.: 28 t- change gears, arbors, toolings, clamping plots- universal hob head- swiveling outer steady - single indexing deviceparty overhauled in 2023The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Key data: 800 mm, 16
good working condition
max. wheel diameter: 600 mmgear width: 0 mmmax. module: 16 (25) min. module: 1 center distance betw. workpiece-tool min/max.: 40 - 590 mmdiameter of hob: 290 mmcutter length max.: 470 mmtangential adjustment: 450 mmmilling head -swivable +/-: 45 °milling head speed: 15 - 380 U/mintable rotation speed: 50 U/minmilling spindle drive: 37 kWtable diameter: mmtable load: 3750 kgfeeds: 2000 mm/minControl: Siemens 840D total power requirement: 115 kVAweight of the machine ca.: 31 tdimensions of the machine ca.: m- 6-axis CNC control Siemens Sinumerik 840 D- complete covering- counter stay- Coolant Unit- Chip ConveyorThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
CHURCHILL PH3615 gear hobbing machine Max workpiece diameter 914 mm Max diametral/ pitch- 8 Module, 3 D.P. Horizontal centre distance:-63,5- 559 mm Max horizontal travel 469 mm Height hob centre to worktable: 127- 508 mm Max travel of vertical feed 381 mm Max height worktable to tailstock centre768 mm Table diameter 762 mm Table hole (diameter x depth) 89 x 381 mm Hob dia x length 178 x 203 mm Max travel of hob slide 127 mm Diameter of hob arbor 32 mm Hob spindle speeds, infinitely variable 50 – 200 rpm Vertical feeds 0.38 – 5 mm Main drive motor 10 HP Floor area 3960 x 2130 x 2300 mm Weight 11,500 kg Extended set of change gears Complete documentation Operational variable speed drives for main motor and feed drives
max. wheel diameter: 250 mmgear width: 242 mmmax. module: 4 min. module: 0,5 table diameter: 250 mmtable bore diameter: 68 mmmilling cutter dia. x width: 130 x 130 mmspindle stroke - max.: 110 mmmin. number of teeth: 6 center distance betw. workpiece-tool min/max.: 10 - 210 mmmilling spindle speeds (infinitely variable): 80 - 500 U/minfeeds axial: 0,32 - 4 mm/WUradial feed: 0,05 - 1,6 mm/WUfeeds - tangential: 0,16 - 2 mm/WUControl: LAUER PCS table diameter: 250 mmtable hole: 62 mmmilling cutter dia. x width: 130 x 130 mmtotal power requirement: 16 kVaweight of the machine ca.: 3,6 tdimensions of the machine ca.: 2,8 x 2,4 x 1,9 mMachine ideal for electrical retrofittingEquipped with:- LAUER PCS NC control- Siemens Simatic S5 PLC- Loading device/magazine for workpiece size max. 140 mm Ø- Shifting- 2-cut cycleThe data for this ad was created with ModulMWS - the software solution of LogoTe ...
MODUL ZFWZ 1250x14I gear hober (can do 1580 mm) Max. Diameter: 1250 mm Cutting width: 600 mm Module 2-16 Maximum size of the hob: 240 x 280 mm Table diameter: 1020 mm Speeds: 28 – 200 rpm Axial feed rates: 0.28 – 8 mm/min Radial feed rates: 0.1 – 2 mm/min Tangential feeds: 0.16 – 4 mm/min Stand tilt – left/right: +/- 45 Main motor power: 5 / 19.5 kW Power of the rapids motor: 12,5 kW Max. diameter of the part without tailstock: 1,250 mm Max. diameter of the part with tailstock: 800 mm Weight of the machine : 16 t Machine dimensions approx. 4.5 x 2.1 x h 3.3 m EQUIPMENT: Extended driven shaft for gear cutting up to Ø 1580 mm Capability to work with hob cutters Ø 235 mm and length 380 mm. Inverter control of the main electric motor. Expanded set of change gears
max. wheel diameter: 5500 mmgear width: 1500 mmmax. module: 32 faceplate diameter: 3740 mmswing diameter: 6200 mmturning height: 1200 mmcontrol: FANUC 31i MODEL B : 1250 mmcross rail - adjustment: 3000 mmturning speeds: 3-15 U/minspindle turning speed - stepless: 15 - 1500 U/minworkpiece weight: 39,4 tmax. dia. of teeth cutting: 5500 mmtooth width: 550 mmmodule: 32 cutter speeds: 10 -150 U/minmilling cutter dia. x width: 450 x 110 mmmilling head axial adjustable: 2060 mmtotal power requirement: - kWweight of the machine ca.: - tdimensions of the machine ca.: - mComplex TurnMill & Gear Cutting Machine- CNC control FANUC 31i B- Turning and Milling Function- ATC- Angular Milling Head- Gear Hobbing (internal and external)- Chip ConveyorThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Gear hobbing machine STANKO 5K32 with accessories.
max. wheel diameter: 400 mmgear width: 275 mmgear width: 275 mmmax. module: 6 weight of the machine ca.: 5,5 tshifting: 100 mmdist. cutter spindle - workpiece spindle: 40/265 mmhob turning speeds: 50-400 U/minThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Gear hobbing machine LIEBHERR ET 1200
max. wheel diameter: 180 mmtable diameter: 145 mmmax. module: 3-5 mmgear width: 250 mmtable turning speeds: 800 U/minmilling head vertical adjustable: 400 mmMilling axis swiveling range: + / - 45 °max. milling cutter diameter: 90 mmhob turning speeds: 0 - 6000 U/mincutter length max.: 211 mmcontrol: Siemens 840 Dtotal power requirement: 23 kWweight of the machine ca.: ca. 10 tdimensions of the machine ca.: 4,5 x 3,5 x 2,7 mMachine in top condition, equipped with loading unit, many accessories.This machine is equipped with manual deburring function with a cutting wheel, no chamfering.The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
max. wheel diameter: 400 mmgear width: 275 mmmax. module: 6 Overall size: 300x330x245 cmweight of the machine ca.: 5,5 tdist. cutter spindle - workpiece spindle: 40/265 mmhob turning speeds: 50-400 U/minSpecification:Max wheel diameter: 400 mmMin module: 1Max module: 6 Table diameter: 370 mm Max wheel diameter: -With counterstay: 340 mm -Without counterstay: 400 mmMax axial offset: 275 mmMax tangential adjustment: 100 mmTooth helical angle: 45 degreesMax cutter diameter: 145 mmMax hobbing length: 170 mmHob turning speeds capacity: 63-180 U/minFeeds infinitely variable axial: 0,2-10 mm/UFeeds infinitely variable tangential: 0,1-5 mm/URadial for spur gears: 0,1-4 mm/URadial for worm gears: 0,025-1 mm/URapid traverse axial: 500 mm/minRapid traverse tangential: 250 mm/minRadial for spur gears: 400 mm/URadial for worm gears: 100 mm/UMotor power: 7.4 kWThe data for this ad was created with Mod ...
max. wheel diameter: 150 mmgear width: mmmax. module: 4 min. module: control: Sinumerik 840 D table diameter: 140 mmmaximum axial offset: 200 mmmilling tool taper: ISO 40 diameter of hob: max. 130 mmcutter length max.: 220 mmmilling spindle speeds (infinitely variable): 300 - 1200 U/minshifting: max. 170 mmmilling head -swivable +/-: 45 °feed speeds: 1 - 1500 mm/minrapid travel speed: 3000 m/minworkpiece magazin: Stückmax. workpiece diameter: im Magazin: 150 mmtotal power requirement: 50 kWweight of the machine ca.: 8,5 tdimensions of the machine ca.: 4,7 x 3,6 x 2,6 mCondition: ready for operation: Video(s) available on our website.: Electric 400 Volt: Used gear hobbing machine, Pfauter, completely overhauled in 2023 by the specialist company SerWeMa.There is another identical machine available, but the spindle needs to be overhauled. If you are interested, you can inquire about ...
max. wheel diameter: 630 mmgear width: 375 mmmax. module: 10 clamping table: 550 mmtable hole: 125 mmmilling spindle speeds infinitely variable: 62 - 390 U/mintaper: MORSE 5 axial-feeds: 0,40 - 6,80 mm/Uradial feeds: 0,10 - 1,76 mm/Udist. cutter spindle - workpiece spindle: 50 - 425 mmno. of teeth: min. 8 milling cutter dia. x width: 192 / 215 mmshifting: 200 mmmain drive motor: 7,5 kWtotal power requirement: 21 kVaweight of the machine ca.: 8,2 tMain features:-Universal hob head with tangential movement-Automatic shifting-Automatic dwell attachment-Hydraulic clamping in table-Pressure reduce valve for outer steady-Magnetic swarf conveyorAccessory:1 set of tools for operating and maintenance1 set differential gears, module 1,751 set indexing change gears module 2,51 change gear cabinetThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Gear hobbing machine vertical Pfauter P251 With accessories
MODUL ZFWZ 630 Gear hobbing machine Wheel diameter 630-710 mm Gear width 400 mm Module 1-10 Max. axial feeding travel 400 mm Max. tangential feeding travel (hob shift) 200 mm Max. helix angle 45 degrees Min. number of teeth hobbed 10 Min. number of teeth hobbed with indexing drive 5 Max. hob diameter 200 mm Max. hob length 250 mm Diameter of working table 580 mm Hole in working table 100-250 mm Depth of hole in working table 45-300 mm Distance center of hob to working table surface 175-575 mm Driving taper for hob arbor (step taper) 50 mm Hob speeds of universal hobbing head steeped 50-400 rpm Milling spindle speeds (infinitely variable) 40-400 rpm Power capacity 29 kW Machine dimensions 3380x2715x2250 mm Machine weight: 9200 kg
MODUL ZFWZ 3150/3 Gear hobbing machine max. wheel dia. 3150 mm min. wheel dia. 500 mm max. wheel diameter with outboard-support 1600 mm max. module 30 mm gear width 1000 mm max. helical angle 45 deg tangential adjustment 500 mm cutter length max. 440 mm diameter of cutter (hob) 350 mm table diameter 2400 mm table bore diameter 500 mm depth of hole 1100 m table load max. 30 t Accessories Dimnsions 6700x5400x4800 mm Weight 65000 kg
Gear hobbing machine PFAUTER 1200mm, modul 12, with change gears
Key data: 1600 mm, 460 mm, 16
TABLE DIAM 1350
Key data: 460 mm, 10
BEVEL GEAR SPIRAL GENERATOR
MAX DIAMETER 640 MAX MODUL 8 TABLE DIAMEER 550
KOEPFER 151 Gear Hobbing Machine - Horizontal Available 2 machines. Semi-automatic machine Max. gear dia 150 mm Module 2 Max Profile depth / Plunge cut depth 7 mm Max hobbing length 135 mm Max length of workpiece, approx. 280 mm Hob slide swivable 250 degrees Hob size dia x length 65 x 60 mm Hob shifting, manually max. 40 mm Hob Spindle speeds 140 – 1120 rpm Workspindle bore 24 mm Bore of collet chuck, max. 3 – 24 mm Feed range, axial/plunge cut 0.06 – 2 mm/rev No. of teeth, min./max. 6 - 200 Spindle Drive/Total electrical load, approx. 2,2 / 4 kW Weight, approx. 1,400 kg Very good condition
Gear hobbing machine STAEHELY mod. SH25US + n. 2 Basket sanders D 1700 and D 1400
Gear hobbing machine 53A50H, STANKO, with change gears
[ 5000 characters max., no information about the advertiser ] Brand:MODUL Model:ZFWZ 2000/3 Type:Gear Hobbers Year:1981 Location:Czech Republic Specification: Max diameter of gear without tailstock 2100 mm Max diameter of gear with tailstock 1450 mm Max face of gear 1060mm Max module with hobbing head 22 Max/ Min center distance 1240/150 mm Min number of teeth 10 Max pressure angel 45 deg Table dia / number of slots 1800 mm/12 Bore in table / length 600/800 mm Max dia of hob / length 300/330 mm Max weight of workpiece 15000 kg Accessories: Standard milling head Tailstock (no clamping) Set of gear supports (shoes) Set of arbors Set of change gears
