fin machines used for sale

2-station machine, Preform silo, - guide and - set-up. For an extra price: compressor + moulds. Power up to 2900 bottles/hour

TECHNICAL SPECIFICATIONS Manufacturer: August Müller Rottweil (AMR) Description: Finger roller grate Type: Stationary Type: 11-F2-5/15 Year of Make: 2019 Slope: 11° Power: 3 x 22 kW / 400V Number of rotary shafts: 15 pieces Max. feed capacity: 150 - 250 t/h Max. drop height on the finger roller grate: 2000 mm Max. size of the feed material: 0 - 120 mm Sieving: 0 - 25 mm Weight: 16,000 kg Max. external dimensions (L/W/H): 5800mm x 2950mm x 2550mm SPECIFIC COMMENT - Plant has only been in operation for about 3 years - Processing of heavily contaminated screening waste - Spinning, equalization and cleaning of the feed material - Dismantling and loading included in the offer

PET stretch blower, incl. Preform silo, conveyor, sorter and feed, up to 6000 bottles/hour, 6 stations, 0.2 - 3.0 litre, technically / optically good condition. Available at an additional cost: compressor system, mould cooler and moulds.

Blow volume 0.2 - 10.0 ltr. Capacity: up to 1200 bottles/hour NEW MACHINE, 1-station machine, incl. preform bunker and feeder. Gergen Supplement: Compressor, refrigeration unit and moulds

ALPHA Q 351 PROGRESS PULS MM WLG FD • Year 2016 • Inverter welding machine, DC, pulse, water-cooled • Multiprocess: MIG/MAG, TIG lift arc, MMA, air arc gouging • Water-cooled MIG/MAG inverter welding machine, pulse, with separate wire feeder Excellent Multimatrix welding characteristics • Equipped with Synergic characteristics for EWM coldArc, EWM coldArc puls, EWM pipeSolution, EWM forceArc, EWM forceArc puls, EWM rootArc, EWM rootArc puls and superPuls • Adjustable start and end-crater functions • Program operation with 16 programs per JOB • Equipped with Synergic characteristics for GMAW welding of steel/CrNi/aluminium • Infinitely adjustable arc dynamics (choke effect) • Large power reserves thanks to high duty cycle with all components heating up less as a result, guaranteeing a longer service life for machines when in use •  ...

PET stretching / blowing machine, up to 3000 bottles / hour, incl. preform bunkers, conveyors and feeders. Available for an additional charge: moulds for 0.3-2 l., compressor and cooling unit

PET plug-in / blow era 10 blowing stations, capacity: approx. 8,000 - up to 10,000 bottles / hrs. Volume: 0.2 - 3.0 litre, incl. preform silo and steep conveyor and feeder.

Pos. 9749.13 - 1 MAYER type Relanit 3.2 II, gauge 28, diameter 30, jersey open knit, 2640 needles, 96 feeders, lycra, 3+1 tracks Pos. 9750.11 - 1 MAYER type Relanit 4, gauge 28, diameter 30, jersey tubular knit, 2640 needles, 96 feeders, 3+1 tracks Pos. 9751.18 - 1 MAYER type Relanit 4, gauge 24 installed and spare cylinder gauge 28, diameter 30, jersey tubular knit, 2268 needles, 96 feeders, 3+1 tracks Pos. 9752.1 - 1 MAYER type MV4 II, gauge 20 installed and spare cylinders gauge 24 and 28, diameter 30, jersey tubular knit, 1872 needles, 96 feeders, 4 tracks Pos. 9753.8 - 1 MAYER type FLF, gauge 14, diameter 30, rib tubular knit, 2 x 1320 needles, 44 feeders, lycra, 1/1 tracks Pos. 9754.5 - 1 MAYER type MLBF, gauge 22, diameter 30, plush tubular knit, 2068 needles, 96 feeders, 4 tracks Pos. 9755.17 - 1 SANTONI type Zenit SV, gauge 28, diameter 34, jersey open knit, 29 ...

DATASHEET – RAMO TN20 CNC LATHE Manufacturer: RAMO Industrie SA Model: TN20 Numerical control: NUM 1060 (Telemechanical) Type: Inclined Bench CNC Lathe Condition: Good general condition, visible machine under power ⚙️ TECHNICAL SPECIFICATIONS Power supply: 3 × 400 V – 50 Hz Current rating: 63 A Control voltage: 110 V ~ Signaling voltage: 110 V ~ Lighting voltage: 220 V ~ Clutch voltage: 24 V = MECHANICAL CAPACITIES (TN20 standard) Turning diameter above the bed: 420 mm Turning diameter above carriage: 250 mm Length between toes: 500 mm Z-axis travel: 500 mm X-axis travel: 200 mm Spindle passage: Ø 40 mm Spindle speed: 30 to 4000 rpm Spindle Cone: Camlock D1-4 Spindle motor power: 7.5 kW Fast feeds: 10 m/min (X and Z axis) Tool Turret: 8 automatic positions DIMENSIONS AND WEIGHT Dimensions (W × D × H): app ...

- The largest diameter of the workpiece, mm 90 - The maximum diameter of the planted flange, mm 120 - Rated force of the landing slide, kN 6300 - The force perceived by the clamping slide with closed dies, kN 6300 - stroke of the landing slider, mm 350 - The stroke of the landing slide after closing the dies, mm 230 - The frequency of continuous idle slider per minute, not less than 42 - Power of the electric motor 45 - Dimensions, mm length 4835 width 3450 height 2880

Key data: 40 , 200 , 1340

The all-electric servo bending machine is one of the products with independent intellectual property rights developed by our company. Special high-load screw and guide rail structure, imported bearing installation, high load-bearing capacity, high positioning accuracy, long life, machine tool rigidity, precision retention, and reliability are close to perfection. By introducing advanced design concepts and scientific design methods, the shortcomings that traditional designs cannot avoid have been solved. This bending machine is fast and simple to program, can realize concurrent linkage of multiple axes, fast feed positioning, and significantly improves the efficiency, accuracy and consistency of bending, which is far superior to traditional hydraulic bending machines, and does not require the use of hydraulic oil, is environmentally friendly and pollution-free. Compared with traditional ...

10 blow-up stations , max. 12,000 - 14,000 bottles/hr, volume: 0.2 - 3.0 liters, preform silo, steep conveyor and feeder, equipped for PCO 1810 x 28mm. Available at an additional cost: compressor system, mould cooler, mould and air conveying system

Cooling capacity 60 kW, Number of compressors: 1, Refrigeration circuit: 1 Cold water flow: 20°C Cold water return: 15°C at air inlet 42°C, Total water circulation: 12.7 m3/h Tank volume: 330 liters

Key data: 420 mm, 650 mm

Machine Type: CNC Lathe Manufacturer: Okuma Type: LB400M-1SC Year of Make: 2000 Commissioning: 2001 Control: OSP-U100L Spindle hours: 14502 hrs Delivery time: in stock Machinery - Interior extraction from Hengst Filtration (built in 2023) - Touchsetter, tool measurement - C-axis (main spindle) - Tool breakage and wear monitoring - 3-jaw chuck, Kitagawa B210, Ø250 - Tailstock available - Coolant supply, also available through the tool - Dialogue programming IGF - Chip conveyor (scraper) Technical details - Max. turning length: 650 mm - Max. turning diameter: 420 mm - X-axis travel: 300 mm - Travel Z-axis: 675 mm - Travel C-axis: 360° - Chuck passage: 72 mm - Spindle passage: 95 mm - Clamping cylinder passage: 95 mm - Tool holder: VDI 40 - Tool stations: Stations 12 - Spindle speed: 2800 rpm - Main spindle power: 22/30 kW - M-spindle ...

Blow volume 0.2-2.0 ltr. PET stretch blower, 3 blow stations, capacity: up to approx. 3,600 bottles / h. Incl. preform bunker, lift and sorter, Available at extra cost: compressor, cooler and moulds

TECHNICAL DATA: Required space mm: 830 x 860 x H 1150 01 Vertical brush KW 0,37 Motion: right - left Weight Kg: 250

Key data: 370 mm, 600 mm

Machine Type: CNC Lathe Manufacturer: Okuma Type: LU300-2ST Year of Make: 2005 Control: OSP-E100L Delivery time: in stock Machinery  Parts conveyor belt and parts collection tray – workpiece chute with removal conveyor belt incl. electrical kit  2 disc turret with VDI40 (12 + 8 stations)  Power clamping cylinder for hollow chips – Hole in the drawbar 52mm  Extension Kit "D" – Kit one touch IGF-D  Open/close chuck while the spindle is running via M-Code  Reinforced coolant pump 8 bar  Coolant on A and B turrets can be switched via M function  Interface for connecting rod feed  Chip conveyor Technical details  Swing diameter over bed: 530mm  Swing diameter over slide: 380mm  Distance between the tips: 600mm  Max. turning diameter: 370mm  Max. turning length: 600mm  Travel X-axis: upper 260mm  ...

Modular built semi-automatic twist wrapping machine Product dimensions: Width: 50 - 730 mm Height: 20 - 520 mm Length: 750 mm to infinity Maximum diagonal: 730 mm Packing materials: PE stretch film, VCI stretch film PE film, crepe paper, etc. Width: up to 250 mm Core average: 76 mm Very good condition!

CATALOG NUMBER M0252 PRODUCT FEATURES The main features of the machine: - Single-head drilling machine for drilling in the range of 0 - 90 ° - Pivoting angle of the head adjusted pneumatically - Possibility to set lateral supports with an accuracy of 0.1 mm - Safety holders allow quick adjustment of panels without adjustment - Spindles adapted for quick couplers - Patented pneumatic clamps of the material - MDF work table - Quick and accurate adjustment - Precise drilling - Italian production Standard equipment of the machine: - 2 aluminum rulers with a length of 1.5 m (right and left) with four stopwatches - 5 quick connectors - Wooden box securing the machine in transport. ADVANTAGES - vertical / horizontal / angled drilling - multi-spindle - new machine - CE certificate - solid - professional TECHNICAL DATA - number of spindles 23 - dista ...

Siemens Vertix 3D built 2010, refurbished 2019 The offer includes the following components: 3D ceiling stand with integrated cassette holder for ENT recording Grid wall 3D hydraulic multixtable Polydoros LX 30/50 Generator with touchscreen control panel Dose area productmeasuring device Agfa CR 85X Memory Film Scanner Transportation €860.00 Installation €2500.00 Optional: Full body grid wall AGFA CR Easylift, new X-ray tube, C-bow Ziehm Vista 6 months warranty When ordering by 01.03.2020 10% discount

Key data: 340 mm, 1000 mm

Machine Type: CNC Lathe Manufacturer: Okuma Type: LU15-M Year of Make: 2000 Control: OSP-U100L Country of origin: Japan Delivery time: in stock Long turning length-1000 mm Towable Tailstock – Automatic G152 Partial hollow clamping device The lathe is in very good condition. The basic and additional equipment makes it possible to process long turning lengths of up to 1000 mm with this used machine. Effective productions continue to be achieved thanks to the towable tailstock – automatic, the tool breakage/wear control, the partial hollow clamping device, the K-pump and the dialogue programming (IGF). An optimal machine for economical and reliable production. The machine is user-friendly and can be integrated into production immediately. Machinery Spindle motor VAC built 22/15 kW Long turning length – 1000 mm towable tailstock – automatic G152 3-jaw chuck Forka ...

CNC CONTROL: MSD 501 II, FANUC FEATURES: DIAMETER ADMITTED ON THE BED, MM 680 MAXIMUM TURNING DIAMETER 440 MM N1 MAXIMUM TREATMENT DIAMETER N2 322 MM MAXIMUM TURNING LENGTH, MM 471 THE STANDARD MACHINING DIAMETER MM170 MAIN SPINDLE: STEP PANEL 45 MM COUNTER SPINDLE: HOLE PITCH LINE 43 MM TURRET 1: POSITION N12 ALL MOTORIZED TOWER 2: POSITION N12 ALL MOTORIZED

Technical data: Maximum parent roll width: 1420 mm Minimum parent roll width: 600 mm Maximum parent roll diameter: 1500 mm Maximum parent roll weight: 2500 kg Maximum unwinding tension (Ø1500 mm): 600 N Minimum unwinding tension (Ø1000 mm): 40 N Minimum standard slitting width: 100 mm Maximum rewinding width: 1400 mm Maximum rewinding diameter: 1050 mm Maximum rewinding weight: • Ø76 mm shaft: 600 kg • Ø152 mm shaft: 1000 kg Maximum rewinding tension: 600 N Maximum production speed: 600 m/min Power supply: 3 x 400V 50Hz Installed power: 30 kW Compressed air: 6 bar, dry Materials to be slit: • Paper-based / liner-based packaging laminates. • Board from 80 to 300 g/m². Unwind section: A separate between-centers unwinder, type T9, 1500 mm diameter, including: • Hydraulic cylinder control for lifting parent rolls from the floor. • Two motors driving th ...

KRONEN AS 4 APPLE PEELING, CORING AND CUTTING MACHINE Manufacturer: KRONEN Model: AS 4 Year: 2017 Serial no.: 175012 Multipurpose semiautomatic apple processing machine designed to peel, core and cut apples into segments and slices of different sizes (depending on the cutting accessories that are used). It is capable of processing up to 3 apples at the same time. Made of stainless steel Max. capacity: 600 apples/hour (approx. 90 kg/h) Apple size: Ø 55 - 85 mm Electrical data: 230 V/50 Hz/0.18 kW/1PH Overall dimensions (mm): 300 x 660 x 400 (WxLxH) Weight: 35 kg The following cutting accessories are included: - Ø 23 mm corer - Blades for cutting into 10 and 24 segments

Spiral kneader Boku SK 240 A Basic overhaul basic refurbished spiral kneader Boku type SP 240 A with digital Steuerung.Es are 2 boilers in stainless steel with trolley. The kneader is suitable for a maximum of 240 kg of dough or for a maximum of 150 kg of flour.The machine has 2 speeds (slow and fast) and 2 Mixing time zones. Optionally, you can get the machine with a tipper and up to 4 boilers. Type: SK 240 AS CS for maximum 240kg of dough or for max. 150 kg flour 2 automatic timers 2 courses slow and fast Stainless steel spiral with 2 stainless steel boilers optional lye with up to 4 boilers Machine is overhauled and repainted

Universal and variable X-ray system. Mobile C-bow with 80 kW power iruund compact design. Particularly suitable for vascular diagnosis and surgery, cardiology, neurology, orthopedics, etc. Very good image quality through CCD Camera, image postprocessing, DICOM etc.

Kemper Langwirker-I-L

Rego SM4 Stroke Machine Stirring Machine for 40 Liters For sale is a Rego SM4 stirring and stirring machine, a robust and powerful device for bakers. The machine is ideal for whipping and stirring various creams and light doughs. Rego SM4 Stroke and Stirring Machine - Manufacturer: Rego Herlitzius - Model: SM4 - for mixing, kneading, beating and stirring a wide variety of masses (e.g. doughs, creams, shames, etc.) - for a maximum of 40 litres - Speed adjustable - 2 working functions, stirring or beating - Boiler lighting - With EMERGENCY stop button - incl. 2 whisks + 1 kettle Technical data and dimensions: - Connection 400V, 16A plug - Power: 1.6 kW - Dimensions: 720 x 680 x 1710 mm, WxDxH - Weight approx. 285 kg The machine can be visited and tested by appointment. More information and pictures as well as delivery on request.

NEGRI BOSSI - SACMI 1300 Ton HIGH TONNAGE 2014 Model BI-POWER VH1300 /12100 120mm Screw Calculated Injection Volume 7351 cm3 Shot Weight 6689 Grams Space between HxV Tie Bars 1400 x 1200 ASK FOR VIDEOS

Machine will be complete refurbished with new parts width: 1200 mm PLC: Siemens S5 Diameter: 2-10 mm Pull out unit: MVL5

Soehnle Professional 2790 Weighing Terminal Floor Scale 9013 The SOEHNLE 2790 display unit is very handy and also protected according to protection class IP65, which means that it can also be used in wet areas without any problems With only five buttons, the SOEHNLE 2790 digital display device is particularly easy to operate. The built-in functions are on/off, tare, clear tare, zero and print. In addition, the 2790 indicator also has a piece counting function. The SOEHNLE 2790 display unit can be operated not only with the 230 V power supply included in the scope of delivery, but also with batteries for up to 100 hours independently of the mains. The 20 mm high digital display is backlit when plugged in and is therefore particularly easy to read. In battery or battery operation, an automatic switch-off can also be set to protect the batteries and batteries. Soehnle ...

DIGI SM-5500B System Scale SM-5500B, the advanced PC-based system scale printer that provides you with multiple retail solutions. Increases operating revenue, improves operations with integrated queuing and collection system through various innovative features of the SM-5500B. Experience real retail solutions offered by DIGI's PC scales. • Linerless printing with integrated automatic cutting device • Watermark printing • Speed ID • InfoTag and electronic signage e.Label • Integrated queuing and collection system •Waste management • Interactive screen display Power source 230 V (50/60 Hz.) Operating Humidity 15% - 85% RH Non-condensing Operating temperature -10° C to +40° C Operator display 12.1" Customer Display 7"WVGA (800x480) Interface RS232C, Ethernet (standard) max. 15/30 kg, min. 100g, e = 5/10g, Dimensions (in mm) 385(W) x 507(D) x 148(H)  ...

Teigabwieger Trima TA dough divider -with disused belt -1 Piston engine -with Siemens Touchpanle control -Weight range of 250- 2800 grams -Power of 650- 1500 pieces / hour -Stainless steel hopper -can be used on wheels

Longitudinal Splicer Manufactured by KUPER Model: FL/I-1000 - FL/INNOVATION

Longitudinal Splicer Manufactured by FISHER+RÜCKLE

Slotting machine TOS HOV63

General Manufacturer: Stama Type: MT 733 two Year of Make: 2020 Control: Siemens Sinumerik 840D SL Travel: X 615 mm Y 290 mm Z 500 mm Rapid traverse: 65 m/min Feed: x 4,000 N / Y 4,000 N / Z 8,000 N Main spindle unit Speed: 12,500 rpm Tool holder: HSK-T63 Pull-in force: 18 kN Spindle bearing diameter: 80 mm Tool magazine Number of available magazine slots: 64 Tool diameter max. when fully equipped: 78 mm Tool diameter max. with free secondary positions: 140 mm Tool length: max. 300 mm Tool holder: HSK-A/T63 Tool weight: max. 10 kg Total chain load: max. 115 kg Rotary swivel unit Swivel angle: +30 to -180° Swivel axis repeatability: ±1" Swivel axis speed: max. 61 1/min Clamping torque tangential swivel axis: 3,000 Nm Clamping torque tangential counter bearing: 1,800 Nm Condition Condition: Used Functional: tested and fully functional

Manufacturer: Handtmann Type: 34-2 Turning gear HANDTMANN 34-2 for Handtmann VF 10 , 12, 16, 18 , 20 Request an offer iNTER-WiBA Sp.J. Ul. Krakowska 263 PL 43-305 Bielsko-Biala VAT ID: PL547-17-47-669 tel. 0048/33 812 58 60 Fax. 0048/33 812 58 36

GLUE APPLICATOR Manufactured by FISHER+RÜCKLE Model: Gluemate

Heid S-200 CNC Lathe Manufacturer: Heid Type: S 200 Machine Type: CNC Lathe Tailstock travel: 175 mm Tailstock quill holder: Morse cone: 4 MK Quill stroke: 140 mm Quill diameter: 95 mm Pressure capacity: 17 kN Connection 50 Hz 3x: 380 Volts Total power requirement: 65 kVA Spindle speeds: Infinitely variable from 0 rpm to: 4000 rpm Spindle bore: 77 mm Tool shank cross-section: 25x25 mm Turning diameter above the bed: 420 mm Turning diameter maximum: 250 mm Turret slide: Longitudinal travel (Z-axis): 1150 mm Flat travel (X-axis): 230 mm More items - new and used - can be found in our shop! International shipping costs on request!

Manufacturer: Handtmann Type: 35-1 Turning gear HANDTMANN 35-1 for Handtmann VF 10 , 12, 16, 18 , 20 Request an offer iNTER-WiBA Sp.J. Ul. Krakowska 263 PL 43-305 Bielsko-Biala VAT ID: PL547-17-47-669 tel. 0048/33 812 58 60 Fax. 0048/33 812 58 36

Gluing and Milling Line Manufactured by FISHER+RÜCKLE Model: EFA-28 Cross-feed Splicer Manufactured by FISHER+RÜCKLE Model: FL-728

Description Seiger lathe SLZ 800E x 4000 Details Machine no. 4443 Year of construction 2008 Siemens Cycle Control Spindle holder according to DIN 55027 size 11 Spindle bore Ø 130 mm Spindle diameter in the front bearing 170 mm Spindle taper 1:20 Drive power 20/28 kW Main spindle speed switching stage "I" 9-1,800 min-1 Main spindle speed switching stage "II" 9-400 min-1 Maximum torque: 3,200 Nm Center width 4,000 mm Circulation Ø above the bed 810 mm Circulation Ø above the face slide 540 mm Bed width 480 mm Machine dimensions 2,000+center width x 2,750 x 2,000 mm Permissible workpiece masses between points without setting stick 2,000 kg Permissible workpiece masses between points with a setting stick 2,200 kg Permissible workpiece masses between tips with two setting sticks 2,500 kg Permissible workpiece masses flying i ...

Description Heyligenstaedt Lathe NDb-630 Details Year of manufacture 1980 Tip height above bed 630 mm Turning length 3,000 mm Turning diameter over bed 1,240 mm Turning diameter over bed slide 960 mm Max. workpiece weight without support 10,000 kg Bed width over guideways 850 mm Number of guideways 2 Bed height 650 mm Slide path 3,000 mm Face plate diameter 1,100 mm Main spindle diameter in the front bearing 280 mm Max. torque at the face plate 25,000 Nm max. workpiece weight clamped on the fly at center of gravity distance 250 mm in front of face plate 4,000 kg Main spindle speed range 2.24 - 450 rpm. Number of main spindle speeds 4 mech. Levels Power main motor 50 kW Main motor speed 100-1,000-2,500 rpm. Number of supports: 1 Cutting force support 4,000 kg Guide length front bed track 1,300 mm Quill diameter 250 mm ...

Working Length: 3300 mm

Longitudinal Splicer Manufactured by Kuper Model: FL/Rapid

Working Length: 3100 or 4100

Intact Vacuum skin packer Model: RM571 Serial: 8215 Stainless vacuum skin packer, chamber dimensions 700mm x 500mm x 110mm, adjustable timer controls, various moulds, 3Ph

Ceever Spraymaster Turning Spray Washer The Spraymaster series of industrial washing systems are advanced solutions for spray cleaning of small and medium-sized components with a capacity of up to 4000 kg. Thanks to a rotary table that allows the parts to be evenly wetted with the spray jet, these systems ensure maximum effectiveness in surface treatment. Inside the treatment chamber, a channel system with strategically positioned nozzles allows for complete spray cleaning of all surfaces, optimizing chemical, mechanical and thermal processes in a single operation. Manufacturer: Ceever Type: Spray Master Turning Machine No. Z 429 Loading: 500 kg/batch Voltage: 380 volts Current consumption: 90 A Connected load: 62 kW More items - new and used - can be found in our shop! International shipping costs on request!

with vertical matrix connector Max. work-piece diameter: 140 mm Max. diameter of upset flange: 180 mm Nominal force of upset slide: 12500 kN Force on clamping slide with dies closed: 12500 kN Stroke of: -Upset slide: 460 mm -Upset slide after closing of dies: 310 mm Number of continuous slide strokes per minute: at least 32 Electric motor power: 75 kW Machine dimensions: -Length: 8035 mm -Width: 4800 mm -Height: 3575 mm Machine weight: 140 tons