We use cookies to optimize our website for you and to be able to continuously improve it. By continuing to browse the site you are agreeing to our use of cookies.
Disagree
meta name="robots" content="all">
119,334 used machines on RESALE, but how to find them? Machine Search
maximum number of results exceeded > 1000
please refine your search
used
Pivatic perforating and bendingline Line is manufactured 1999 and it has worked very well for us 20 years. Line is bending line with perforation unit and single press unit 35 tn. In line is separate punching unit so you can perforate material and cut it to separate ballet. Also you can use separate press toll in line. This press unit we have not used, because we other presses. FORSTNER coil cradle Weingarten Decoiler Dimeco Coil feeding line decoiler - straightener feeder Automatic Flexible punching and rollforming line for C and sigma profiles with centralized adjustment”, from Dimeco (Spain), installed/commissioned in 2019 Dimeco Coil feeding line PIVATIC coil punching line FIMI Slit Coil Decoiler and reel winder tunçman Extrusion - Single screw extruder LEMO INTERMAT Thermoforming - Automatic Roll-Fed Machine Uhlmann Blister machine Accela-Cota 170 l Tablet c ...
used
Lippert Pre-feeding belt Post-feeding belt Conveyor belt GF 640-550-400 / 815-550-400 / 820-750-600 RA2050 Technical data: Conveyor length (NL): 640 mm or 815 mm with belt width 400 or 820 mm with belt width 600 frame width (NB): 550 mm / 750 mm Belt width (GuB): 400 mm / 600 mm overall height (BH): 105 mm support feet: optionally available Conveyor speed (v m/s): Speed will be adjusted to the main belt with gearing Drive: Overdrive with toothbelt Idler pulley (UR): Ø = 81 mm Drive pulley (AT): Ø = 81 mm Optionally available: Supports Side guides one and both sides Note that there must be a suitable gear on the output shaft for the overdrive. Therefore, you may need a different return roll. Please contact us in this regard. Broken belts are replaced before delivery Prices net plus VAT ex central warehouse Dr. Sonntag GmbH & Co KG, 97076 Würzburg, Germany Features: Construction year: ...
used
used
used
Geroldinger feeding station with electric heating and cell feeder.
used
Feed for round material, round material feeding system, round steel feeding system, motorized reel for round material for eccentric press, hydraulic press -Round material feeding system: round steel feeding system with console -Feed: Lenze 2.2 kW drive type MDXMA2M 090-31 -Belt tension: pneumatic -Material tension: hydraulic -Tension rollers: for Ø approx. 25 mm -Individual components: see photos -Hydraulic unit: can be included for an additional charge -Transport dimensions: 900/500/H780 mm -Weight: 332kg
used
Pivatic perforating and bendingline Line is manufactured 1999 and it has worked very well for us 20 years. Line is bending line with perforation unit and single press unit 35 tn. In line is separate punching unit so you can perforate material and cut it to separate ballet. Also you can use separate press toll in line. This press unit we have not used, because we other presses. FORSTNER coil cradle Weingarten Decoiler Dimeco Coil feeding line decoiler - straightener feeder Automatic Flexible punching and rollforming line for C and sigma profiles with centralized adjustment”, from Dimeco (Spain), installed/commissioned in 2019 Dimeco Coil feeding line PIVATIC coil punching line FIMI Slit Coil Decoiler and reel winder tunçman Extrusion - Single screw extruder LEMO INTERMAT Thermoforming - Automatic Roll-Fed Machine Uhlmann Blister machine Accela-Cota 170 l Tablet c ...
Feeding conveyor,stainless steel,for bottle packaging in bags,feeding conveyor W 1200 x L 2000 mm
used
Feeding table,with mechanical arm for feeding,L 1800 x W 900 x H 900 mm.
used
Feeding conveyor,stainless steel,for bottle packaging in bags,feeding conveyor W 1200 x L 2000 mm
used
Weber spiral conveyors as feeding technology for Weber screwdriving systems, suitable for any application in the field of feeding fasteners, etc. Offer refers to a spiral conveyor. Other spiral conveyors of the same design are available.
used
Rubber lined, ensulated vibrating chute with 2 outlets and 3 inlets (200 mm Ø each), with 2 imbalance drives (1,8 kW / 960 RPM each). Chute has been used for feeding material in two side by side standing Mogensen sizers.
used
+ ATTENTION - PRICE DROP! + Prices are rising, ours are falling! + Our prices are reduced by 50% now, + due to warehouse restructuring! + Also, consider taking a look at our other offers in stock. feeding device / work-piece-organizer Feldpausch OA 45-L manufacturer: Feldpausch type: OA 45-L manufacturer-series-nr.: 3/L year of construction: 1990 comm.-Nr.: 3990168/079 stock-nr.: 1445 + Regular Price: 2.950,- € > Reduced Price: 1.475,- € BN + All prices are shown without taxes (net price) Technical Data (According to manufacturer) filling weight: ca. 100 kg filling volume: ca. 25 dm³ pot outer diameter: ca. 600 mm pot inner diameter: ca. 440 mm drive power: 220 V / 50 Hz power consumption: 550 VA protection class: IP 54 empty weight: ca. 120 kg standing area: W 750 x D 650 x H 950 – 1.250 mm color: greywhite / red Features vibr ...
used
The Coiltech Decoiler Straightener Feeder System is a compact press feeding system. Belt width: 600mm, material thickness: up to 6.5mm, straightening rollers: 7x115mm, decoiler tonnage: 6000kg, diameter (inner), min-max: 470-520mm. Connected load: 7.5kW, with documentation.
used
Manufacturer: Holzher Vorschub 3 Rollen, Type: ET 117, Feeding by rollers: 3 Rollen, Technical data:: 0,75 , Speeds: 4, Deflection of the pendulum axes mm: ca.25 mm,
used
Manufacturer: Comatic, Bauyeshr : ca.1995, Feeding by belt: yes, Main engine kW: 1,5, Speeds: 4-8-12-24, Stand: yes, Year :ca.1995
used
Pamasol 33200 Pneumatic Feeder With 1-lane output to the conveyor belt Accumulation conveyors ensure an even supply of product to a processing machine. - Hinge chain 150 mm wide - 8-lane, with 1-lane output - Drive with infinitely variable geared motor - Without central belt drive - Suitable for continuous operation in hazardous areas - Electric drive unit - Feeding table suitable for Centomat Specifications Capacity: Up to 3000 cans per day The output depends on the size of the can, the filling volume, the type of valve and the number of workers Cans: Ø 100-200 mm x H 50-200 mm, aluminium, tinplate and glass Electrical connection: 3 x 400 V + N + PE, 50 Hz Dimensions: H x W x L 88 x 140 x 290 cm Original price 57.000 ,-€ More items - new and used - can be found in our shop! International shipping costs on request!
used
Reel, unwinder, motorized reel for sheet metal processing, motorized reel, unwinder, sheet metal unwinder, belt feed system, belt system for eccentric press, hydraulic press -Manufacturer: Cisam Impianti, belt feeding system FEEDER -Type: 1000/2B -Passage: 395 mm -Individual components: see photos -Dimensions: 1340/920/H1690 mm -Weight: 829kg
used
Hydraulic Wood Feeding Trolley
used
: : 4 Feeding speed: St./min. Shank diameter: mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
used
P187 - 3x used approx. 43 m³ / 43,000 litres polyester tank, GRP-tank, aboveground, vertically standing, flat floor, in good condition. technical details: capacity: approx. 43 m³ / 43,000 litres material: polyester tank / GRP tank manufacturer: Skoda dimensions: Ø approx. 3.00 m x height approx. 6.50 m Used tanks in good condition, by manufacturer Skoda. Upright standing storage tank with flat bottom, lid on the tank body, multiple connections, inlets and outlets. One tank is equipped with a propeller agitator on the side, functionality not yet tested by us. The container can be used as a storage tank for many different media such as water, liquid feed, fodder, whey, molasses, manure, seeping juice, rapeseed oil or as a rainwater collection tank etc. Price upon request. Transport can be arranged at low cost. It is not possible to update all our advertisem ...
used
consisting of: 2 x tilting station 1 x ventilator 2 x reservoir Piping
used
Aluminium riser conveyor belt with substructure Abm: approx. 2000 + 2000mm Discharge height: 1600mm ( example ) Height of the horizontal area 200mm ( example ) Conveyor belt green, 2-layer particularly transversely stable endless welded with step connection antistatic due to threads in the fabric of the running side Drive, motor control optional Stainless Steel Hopper - Material Feed
used
Feed screw stainless steel used Manufacturer: KOMEN & KUIN D.V. Diameter approx. 500 mm, Conveying length approx. Mm Stainless steel Drive 3 kW 380 / 420 V Total dimensions approx. 4 x 1.6 x 1.6 m. The screw was mounted on this screw blancher Changes and errors in the technical data and information excepted.
used
Demag feed station (EURO pallet dimensions) for placing pallets on the conveyor track ANR 725535 ASN 022 very good condition, year of construction 2000 Price per piece
used
Suitable for conveying bayonet rings, pneumatic supply: 6bar, with documentation.
used
Number of pallets: 15, max. sheet format: 3000x1500mm, length: 9830mm, height: 6155mm, weight: 12t.
used
- Output: up to max. 30to/h - Motor: 400V, 50Hz - Without electrical equipment Mass: - Length: approx. 2000mm + discharge screw - Width: approx. 1700mm - Height: approx. 1700mm
used
diameter range 25 mm wire feed 9,5 m/min max. coil weight 2000 kg
used
Feed technology, feed device, storage container with automatic feed -Automatic feeder with storage container -The device was built for the production of electric clamps -Dimensions: 1300/1400/H1200 mm -Weight: 260 kg
used
Folding former, folding machine, form folding machine, profiling machine, profiling system, slat production, blind production, roller insertion, reel, discharge reel, motor reel for sheet metal processing, motor reel, uncoiler, sheet metal unwinder, strip feed system, strip system for eccentric press, hydraulic press -Profiling system: roller insertion with cooling water/hot water device, made from slats/blinds production -Seal heads: maier type DX 215 L / DX 215 R -Rolls: Ø 120 x 220 mm -Drive: 1.1 kW -Individual components: see photos -Drive shaft: Ø 35mm -Dimension: 1120/405/1310 mm -Weight: 312kg
used
for cap type PCO 28-1881 with Siemens S7 PLC Capacity: approx. 40,000 caps/h with sorting unit with cap control incl. approx. 18 m feeder with 2 blowing stations
used
Technical data baler: Manufacturer according to type plate BRAMIDAN (original manufacturer Kampwert Umwelttechnik GmbH & Co. KG) Type HC 50 (formerly HPK 50 BK) Year of manufacture 2007 Operating hours 11,970 hours, as of March Pressing force 50 tonnes Specific pressing force 650 kN/m² Feed chute dimensions 1250 x 1050 mm (L x W) Filling volume 0.96 cm³ Theoretical cycle time 32 seconds Theoretical throughput capacity 108 m³/hour Bale dimensions 1100 x 700 mm (w x h) length variable Drive power 15 kW Power consumption, total in 50 A Tying 4-fold vertical, fully automatic Throughput rates with a bulk density of 30 kg/cbm approx. 3.1 t/hour Bulk weight of 60 kg/cbm approx. 4.5 tonnes/hour Bulk weight of 100 kg/cbm approx. 7.2 tonnes/hour Bale weights with a bale length of approx. 1.2 m up to 500 kg, depending on material Hydraulic oil tank capacity 400 litres PLC control Siemens S7-200 ...
used
Description: Lifting capacity 50 Kg Work capacity 15 Cycles/min Movement system suction cups Min. panel length 320 mm Max. panel length 3000 mm Min. panel width 250 mm Max. panel width 1000 mm Panel stack station no. stations 2 station loading Max. panel stack height 1600 mm Movement system with frame System suction cups with opening adjustment by NC Vacuum pump Approx. Onsite Dimension. (l x w x h): 1 x 1 x 1 mm, weight approx.: 1 kg
used
Description: Max. panel width 1300 mm Max. panel length 3500 mm Max. panel stack height from the ground 1600 mm Lifting capacity 70 Kg Work capacity 20 Cycles/min Movement system suction cups Approx. Onsite Dimension. (l x w x h): 1 x 1 x 1 mm, weight approx.: 1 kg
used
Capacity round maximum diameter: 0 mm Angle degrees maximum: 0 Feeding length automatic feeder: 0 mm Sawing speed 11 – 14 – 18 – 20 – 22 – 36 M/Min Length:2.200 mm Width:900 mm Height:1.400 mm Weight:1.200 kg
used
Pneumatic feeding (HSF) with moveable scale for Probatone 12 coffee roaster Compatible with Typ 2 and Typ 3 roasters manufactured by Probat with a batch capacity of 12kg Adaptation possible with Probatone 25 or any other roaster if you have an adjustment of the hopper cap made by a metallurgist The pipes are included even if not in the picture In the first picture, the hopper cap is on top of the bean loading hopper Manufactured in 2021, just tested and stored, the condition is like NEW The same system purchased new cost more than 16000€ Find our other announcements by clicking on the machine list in our dealer profile
used
We offer for sale a new hydraulic press (80t closing force). This press is used for extruding and dosing mixed mixtures. The operating time of this machine is a maximum of 20 months. Part of the equipment of this machine is a special stainless steel plate. The machine was used in the prototype process for the production of the BMC mixture.
used
The slot line comes from the Italian brand Reac. 1980 model It enables cuts of 4.00 mm thick and 1100 mm wide. maximum roll weight 10-12 tons.
used
General SKU220T190 LocationBarneveld MakeAZO TypeDA 360 No.1341030-02 Year of construction2017 Main Features MaterialStainless steel Motor0.75 KW Specified Features - Rotating sieve Rotating sievecheck Sieve sizesdia. 100x440 mm Screw sizes1100 mm Inlet300 mm Outlet150 mm With inspection hatchcheck MotorDosing screw: 0.75 kW 220-240/380-415 Volt: Rotor: 0.75 kW 3x400 Volt SpeedDosing screw: 169 rpm: Rotor: 1400 rpm Air purged glandscheck With sieve cagecheck Sieve perforation3x3 mm - 14x14 mm MaterialStainless steel Information Mounted on stainl. st. framecheck With switchcheck Weight500 kg CEcheck Floor space1,3x1,8 m Total height2,6 m Extra Specifications with Mettler Toledo Safeline metal detector with 7 different sieve cages :Rotating sievesAZOSieves > Rotating sievesBrand > AZO What you can expect from Foeth: -- Machine is in working condition -- At ...
used
KARATS DH-30 CNC Deep Hole Borer Manufactured year 2017 Main specification ● Height from Bed sliding to center of Chuck 2,900 mm ● Swing over bed 5,800 mm ● Drilling capacity 56~650 mm dia ● Distance between center 25,500 mm ● Max. working length 24,000 mm ● Max. workpiece load capacity (with 2 Steady rest ) 380 tons ● Max. workpiece clamping dia 3,400 mm Bed ● Total length of Bed 53,850 mm ● Width of Bed 2,500 mm ● Height of Bed 700 mm Headstock ● Spindle shaft dia 800 mm ● Spindle rotating speed 160 rpm ● Chuck size 2,500 mm ● The clamping dia on Chuck 600 ~1,600 mm ( Design 480~1,680 mm ) Boring head ( A-axis) ● The feed for working 14,000 mm ● Max. feeding 25,870 mm ● Min. distance from Chuck 21,300 mm ● Max.. distance from Chuck 47,170 mm ● Rapid feeding speed 4,000 mm/min ...
used
Key data: 500 mm, 160 mm
Optimisation cross-cut saw OptiCut S 90 Speed - Left-hand version Max. wood entrance length 7.2 m Wood dimensions to be processed Sawing unit for large wood cross-sections with saw blade diameter Ø 500 mm Saw blade made of tungsten carbide, Z=144, WZ 20° Saw Blade Drilling 30 mm Saw blade speed max. 3600 rpm. Input lengths min./max. Widths min./max. Thicknesses/thicknesses min./max. Nominal cross-sections (without board curvature) Min. 500 - 7200 mm 23 - 160 mm 12 - 100 mm 23 x 12 mm .max. 160 x 100 mm Package size at max.9 strips per package Packet Ratio Width and Length to Thickness 160x100 mm 2:1 Fixed length min. 60 mm Performance / Positioning Moving speed of the positioning slide infinitely variable max. approx. 240 m/min. Cutting time / cutting height Adjustable The practical daily output depends to a large extent on the production ...
used
Enoberg Bottle Filling Monoblock for still water This used Bottle Filling Monoblock model EVF 24 24 6 N S comes with an integrated rinsing filling and capping system and consists of A rotary rinser with 24 nozzles for the rinsing of bottles A rotary filler with 24 valves for the electronic volumetric filling A capper with 6 heads for the application of plastic screw caps or pressure caps Monoblock Bottling with a machine pitch of 150 72 mm Counterclockwise machine Neck Handling bottle conveying system Key features The Enoberg Filling Monoblock for still water distinguishes itself with its compact frame which considerably simplifies operations to manage clean and maintain the machine and ensures substantial savings on space Filling module equipped with electronic meters to ensure precision The working space of the machine is entirely made of stainless steel and glass ensuring a high stand ...
new
- Hobelbreite 50 - 400 mm - Hobelhöhe 10 - 300 mm - stufenloser Vorschub 5-25 m/min. - Spindel FI 50 mm - Drehzahl 6000 U/min - 6 Spindeln - untere Welle min. / max. Werkzeug FI 160 /180 mm - rechte Welle min. / max. Werkzeug FI 160 /230 mm - linke Welle min. / max. Werkzeug FI 160 /230 mm - obere Welle min. / max. Werkzeug FI 160 /230 mm - 2. obere Welle min. / max. Werkzeug FI 160 /230 mm - untere Welle min. / max. Werkzeug FI 160 /230 mm -max. Sägeblattdurchmesser 2. obere Welle 300 mm Motorleistung: 1. unten 15,0 kW 2. rechte 11,0 kW 3. linke 11,0 kW 4. oben 15,0 kW 5. oben 15,0 kW 6. unten 15,0 kW - Motor Vorschub 11,0 kW - Motor Höhenverstellung 1,5 kW - Gesamtanschluss 94,5 kW - Jointer obere Wellen und unter Welle - horizontale Wellen mit Gegenlager / Hydrospannung - obere Welle elektrisch verstellbar mit Vorschubsystem mit Digitaler Anzeige - linke Welle elektrisch verstellb ...
used
Cat.-Nr. 09-2900-2 in a very good condition for Ketchup, Mayonnaise, Dressing, Mustard In the industrial production of salad dressings, and mayonnaise, you will achieve optimum quality and maximum performance. The entire process plant is built compact and on a central base frame, and this allows easy transportation, quick installation and commissioning. Low Commissioning Cost Plant design ensures smooth production of your products The plant is quickly ready for operation Standardised Machines for best performance and value Our vacuum-process systems are designed to produce products such as Mayo, Ketchup, dressing, sauces, etc. The products can be produced in hot and cold method, also according to customer requirements. The product heating, and cooling is via a double jacket with insulation. The optional direct steam injection is used for rapid product heating, for ...
used
Cat.-Nr. 09-2900-1 in a very good condition for Ketchup, Mayonnaise, Dressing, Mustard In the industrial production of salad dressings, and mayonnaise, you will achieve optimum quality and maximum performance. The entire process plant is built compact and on a central base frame, and this allows easy transportation, quick installation and commissioning. Low Commissioning Cost Plant design ensures smooth production of your products The plant is quickly ready for operation Standardised Machines for best performance and value Our vacuum-process systems are designed to produce products such as Mayo, Ketchup, dressing, sauces, etc. The products can be produced in hot and cold method, also according to customer requirements. The product heating, and cooling is via a double jacket with insulation. The optional direct steam injection is used for rapid product heating, for ...
new
Filling and capping machine for filling liquids and pastes into stand-up pouches (doypacks) with spout. The rotary machine is especially used for filling all kinds of liquids such as water, juices, sauces such as soy sauce, salad dressings, tomato sauce or liquids with high viscosity such as barbecue sauces/BBQ sauces, honey, up to pasty products such as peanut butter, fruit jam, nut nougat cream etc. The filling and capping machine is equipped with six filling heads for liquid filling and with six heads each for positioning and capping the spout caps. The production process is fully automated from bag feeding, filling, cleaning the spouts, feeding the spout caps via lift and capping them, to the output of the final products. To ensure the exact filling volume, the liquid level is constantly monitored. PLC control, touch screen operating monitor (menu available in different languages e.g ...
used
Manufacturer: Mekanika, Type: Apstapler Rohholz, Control: Omron, Work piece width min-max mm: 40-1300, Min.-max. workpiece length in mm: 150-3000, Min.-max. workpiece height in mm: 10-60, Vacuum feeding: yes, Crosswise feeding: yes, Stacking pattern, single-row: mehrreihig, Number of stacks: 2 Stapleplätze, Cycles approx.: 5, Number of sucking lines: Unigripper, Removal of protective boards: no, Feeding speed continous adjustable: yes, Feeding by cross conveyor: yes, machine ready for demonstration: yes, FREE TEXT: Platzbedarf ca.10 m X 7 m/Auflegestationen 5000 mm und 7500 mm,
used
Manufacturer: Weinig, Type: H 17 AS, Year: 1986, Planing widht mm: 230, Number of spindles: 9, Tool exchange places: yes, Separate engine per spindle: yes, Feeding - kW: 11, Feeding speed min-max m/min: 60, Feeding speed continous adjustable: yes, Table length: ca. 4000 mm, 1.Bottom spindle kW: 4, 2nd spindle on right kW: 4, 3.Left spindle kW: 5,5, 4th spindle on right kW: 4, 5.Top spindle kW: 7,5, 6th spindle at bottom kW: 5,5, 8th spindle at bottom kW: 7, 8th spindle on left kW: 4, 10th universal on left kW: 5,5, FREE TEXT: Inverter for feeding., Year :1986