Manufacturer:
(Category: 302)
new and origin packed set of screw and barrel for Reifenhauser extruder, model RT5801-1-150-30, screw diameter 150 mm - 30 l/d
Used Troester rubber extruder type GSV 60/k-12-18 D with feed roll can be modified/overhauled according to customer\s specification, with or without vacuum, year of construction: 1991 machine was in operation until end of 2010. including feed roll, new drive with flat-gear motor screw speed: maximum 62 rpm motor power: 22 kW PLC control and TCU can be renewed, if requested.
Used rubber extruder make Troester, type GSV 60/k-12-18D-m.S., Execution as desired, with or without vacuum Built in 1991, machine was in operation until the beginning of 2010 Feed roller Kpl. new drive with flat gear motor Screw speed max. 62 rpm. Engine power 22 kW Control with PLC and temperature control new on request Extruder similar to attached photos.
used
Ermafa twin screw extruder B 2.95-35 D 1992/1995 -Extruration plant for recycling -with hot-tee, Filter -Drying centrifuge, -Degassing plant, -storage silo, -discharge silo, -Chain elevator. -900-1000 kg/h PP
Amut Type EA 160 Monoscrew Extruder Complete extrusion line for recycling. 2002 New screw and motor. with hot separator, centrifuge, filter, degassing system 900-1000 kg/h PP 800-900 kg/h PE Poverty Recycling Extruder PP=900-1000kg,built 1997, 900-1000 kg/
Amut Type EA 160 Monoscrew Extruder Complete extrusion line for recycling. 2002 New screw and motor. with hot separator, centrifuge, filter, degassing system 900-1000 kg/h PP 800-900 kg/h PE Poverty Recycling Extruder PP=900-1000kg,built 1997, 900-1000 kg/
Amut Type EA 160 Monoscrew Extruder Complete extrusion line for recycling. 2002 New screw and motor. with hot separator, centrifuge, filter, degassing system 900-1000 kg/h PP 800-900 kg/h PE Poverty Recycling Extruder PP=900-1000kg,built 1997, 900-1000 kg/
Amut Type EA 160 Monoscrew Extruder Complete extrusion line for recycling. 2002 New screw and motor. with hot separator, centrifuge, filter, degassing system 900-1000 kg/h PP 800-900 kg/h PE Poverty Recycling Extruder PP=900-1000kg,built 1997, 900-1000 kg/
Amut Type EA 160 Monoscrew Extruder Complete extrusion line for recycling. 2002 New screw and motor. with hot separator, centrifuge, filter, degassing system 900-1000 kg/h PP 800-900 kg/h PE Poverty Recycling Extruder PP=900-1000kg,built 1997, 900-1000 kg/
Plastics Recycling Extruder PP=900-1000kg Complete Line
Reifenhäuser screw with 120 mm diameter, 30 L/D for extruder model RT and / or RH 1651-1-120-30
small die-head with 60, 80 or 100 mm die-insert, with cooling ring
Reifenhäuser Schnecke D = 120 mm - 30 l/d, used for extruder type RH or RT 1651-1-120-30 also available: Set 120 mm - 25 L/D consisting of cylinder and new screw available for Reifenhäuser Extruder Model RT/RH 1651-1-120-25
New extractor frame 900 mm on steel construction. 2 winding capoles are used underneath for edge-straight Winding positioned. The winding capoles are fitted with new pneumatic Expansion winding shafts for 76 mm bobbins. with electric drives
screw for PE and PP much more screws (some are new) available
Extruder 70 mm - 24 L/D with pipe head up to 63 mm, calibration tank 6000 mm Caterpillar extractor, saw
We can offer Krauss maffei extruder,moder ZE90A, manufactured in 2013, main motor power 884kw, large output, installed and used, auxiliary equipments available, serious buyer contact us.
We can offer Krauss maffei extruder,moder ZE90A, manufactured in 2013, main motor power 884kw, large output, installed and used, auxiliary equipments available, serious buyer contact us.
Key data: 58 mm
We can offer a Toshiba extruder. 58/40, year 2010, stopped, working condition.
Key data: 72 mm
We can offer a W&P extruder. 75/36, year 2004, stopped, working condition.
We have some Coperion CTE75, CTE65,CTE50 extrusion compounding lines,serious buyers contact us.
Key data: 150 mm
Berstorff Strainer Extrusion Line Consisting of: Extruder Supplier Berstorff Type GE 150KSx16D Year of construction 2007 Pins: 12 Pins per level: 8 Condition: good Weight approx. 10000 kg Screen change: hydraulic, bladder accumulator 20lt / 300Bar D = 200mm Gear pump Supplier: Maag Pump Systems Type: extrex® 110-5 RV Volume 716 cm³ / rev Year of construction 2013 Condition: good Heaters Supplier: Regloplas Type P140 Year of construction various Number 5 pcs. Cooling bath Cooling medium Water above, 2 rows below with 4 fans each Year of construction 2006 Condition: good Dimensions 9m Weight approx. 500 kg Especially 8 fans Installation tape Year of construction 2006 Condition: good Weight about 300 kg
We can offer you a complete line of Breathable menbrance extrusion line,manufactured by Colines,Italy in 2009,the line has just installed and adjusted,never used for production,like new line.the products-- breathable menbrance is for making diaper and hygienic materials.the net web width is 2850 mm,2 extruders,a 90 mm and a 150 mm,,serious buyer contact us,please Please visit manufacturer's website: .colines.it to learn more about this line.
We can offer 2 twin screw extrusion compoundibg lines,manufactured in 2015 diameter 75mm, L/d 40. water circle pellitzer.drive motor power 160kw.short time working, very good condition.Serious buyers contact us. We have many brands and models machines, tell me what you need seriously!
Barwell MR400 Top Load Ram Extruder
Collin 3 zone Extruder 150degC max temperature with transformer
1 x Buss PR200? Ko-Kneader, supplied fully refurbished by Buss in 1995, G130 gearbox, 11 L/D ratio, with 340kW dc motor and controls. Including oil heater and TCU 2t/hr output. Spare screw and barrel segments.
used
Iddon Cold Feed Extruder. 2.5" screw dia. 10/1 LD Ratio. Motor Size 20.4/5.5 HP
pmh gmbh
