ekstrüderler kullanılmış satılık

Inv. Num. : 7186 Type: NE 7 Producer: WEBER Created: 1997 Parameters: Weight: 3200 kg

Description: The forming machine is equipped with automatic sheet feeding unit. The sheet feeding unit also have a top preheater by the design of Illig. It is fully equipped with pneumatic cylinders and ceramic heating elements.Approx. Onsite Dimension. (l x w x h): 7,000 x 5,000 x 4,000 mm, weight approx.: 12,000 kg

Inv. Num. : 7235 Type: 6.5 Producer: Weber Generated: Parameters: Equipment: Calibration table ? Tow strap

Description: Manufactured: 2005 Serial number: 1226 Operating hours: 5.745.000 cycles Material: PS, PVC, PET, PP, EPS Stations: Forming, Cutting and Stacking Forming Area: 770 x 650 mm Maximum Film width: 820 mm Maximum forming depth: 120 mm Maximum dry cycle speed: 30 cycles/min Max.Closing Force of the Cutting Press: 60 ton Maximum Pressure: 6 bar Vacuum pump motor power: 2,2 kW Total heating power of the upper oven: 36 kW Total heating power of the lower oven: 33 kW Vacuum pump capacity: 100 m^3/h Dimensions (L x W x H): 10,0 x 2,4 x 2,7 m Total Weight: 8000 kg Approx. Onsite Dimension. (l x w x h): 12,000 x 2,000 x 2,600 mm, weight approx.: 8,000 kg

Inv. Num. : 7012 Type: DS 6.5 Producer: Weber Created: 1987 Parameters: Switch-on hours: 42,000 h Screw diameter: 65 mm Main motor power: 16 kW Profile width: 240 mm Output capacity: 100 kg/h Number of screws: 2 pieces Line Components: Extruder WEBER DS 6.5 - 17D Calibration table Uniplast UKT 3/3 Stacking table Uniplast UKR 600

cutting diameter: 280 mmcapacity 90 degrees: flat: 380 x 260 mmcapacity 90 degrees: square: 260 x 260 mmturning speed range:: 40 / 80 m/mindimensions of saw-band: 3440 x 27 x 0,9 mmengine output: 1,5 / 1,8 kWweight: 670 kgThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Key data: 45

Extrusion line for 3D monofilament composed of: - Extruder 1 spindle, brand: Bandera, 45 mm diam 25 L/D, motor: 10 hp. With drying hopper: 100 L, master dispenser. With electrical panel and variable speed drive. - Head for 3D monofilament. - 3 stainless steel bathtubs: 2 m. - Stretch: 4 rollers. With variator. - 2-point monofilament thickness gauge. - Winder: 480x500 mm diam. For large coils. - Large reel unwinder and double rewinder for small reels. Ready to get started? Contact us directly! Send us a WhatsApp message to (+34) 647 590 257 or an email to infogester.es for personalized advice.

Rated capacity: 2000 Wattwork piece lenght: 1075 nmTemperature range: 15 - 40 °Cdimensions: 550 x 1100 x 1200 mmtotal wight: 200 kgMobile laser welder with PenWelderhand-held PenWelder:- pulsed laser operation- average laser power up to max 500 W- Pulse duration 1 to 200 ms depending on application- peak pulse power 1000, 1500 or 2000 W- Siemens control- Integrated protective gas supply- Exchangeable -, adaptable process module (contact tips)- Pilot laser from laser source- Laser parameters via control panelLaser light cable LLK-A / BF 10:- Diameter(µ): 300 / 400 / 600- Length(m): 4 / 6 / 10 / 20Unit little usedThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

PVC sheet extrusion line with head: 280mm, composed of: - 2-screw extruder, brand: Weber, model: DS.8.22, motor: 30 Kw (40 hp), load doser, degasser with vacuum pump. Variable speed drive and electrical panel. - Wide blade head: 280 mm. - Calender, width: 300 mm, diameter: 150 mm. 3 water-cooled rollers. With stretching. - Ink baths, dryer, stretch for several coats of paint. - Cutting shear. - 1-reel winder, width: 300 mm. - Various replacement rollers for ironboards, printers and engravings (drawings on foil). Ahem: Wood simulation. Ready to get started? Contact us directly! Send us a WhatsApp message to (+34) 647 590 257 or an email to infogester.es for personalized advice.

bar capacity: 1-16 mmturning length: 160 mmControl: Fanuc turning speeds: 100 - 12.000 U/minNumber of axles: 6 St.feed: 20 m/minbar length: 3 mtotal power requirement: 3,7 kWweight of the machine ca.: 3,40 tdimensions of the machine ca.: 6,37 x 1,10 x 1,95 m6 axes, 2 spindles:- Movable headstock: Z1, S1- 1 system of independent linear tool X1/Y1 (S3)- 1 independent pick-up spindle with a system of independent linear second tool:X2/Y2/Z2 (S2)- 1 system of independent tools in back machining: 3 tools1 x driven toolLoading magazine Bechler, integrated into the machine2-3 turning holders1 x cutter1 x drilling quillOperating hours: approx. 40500 hThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Key data: 40

Extruder 2 co-rotating screws: 40 mm Ø diam, 35 L/D, brand: Comac, motor: 37 Kw (50 hp) with variable speed drive, year: 1992. Designed to provide exceptional performance in the production of plastic materials. Its powerful 37 kW (50 hp) motor with variable speed drive ensures efficient and versatile operation. The Comac brand is synonymous with quality and durability in the industry, and this extruder is no exception. If you're looking for a reliable machine that has stood the test of time, this may be the perfect choice for your extrusion process. Contact Gester today for additional details on this Comac 2-screw co-rotating extruder and how it can improve your recycling and extrusion operations. Trust in the experience and quality we have been offering for more than three decades.

bar capacity: 1-16 mmturning length: 160 mmControl: Fanuc turning speeds: 100 - 12.000 U/minNumber of axles: 6 St.feed: 20 m/minbar length: 3 mtotal power requirement: 3,7 kWweight of the machine ca.: 3,40 tdimensions of the machine ca.: 6,37 x 1,10 x 1,95 m6 axes, 2 spindles:- Movable headstock: Z1, S1- 1 system of independent linear tool X1/Y1 (S3)- 1 independent pick-up spindle with a system of independent linear second tool:X2/Y2/Z2 (S2)- 1 system of independent tools in back machining: 3 tools1 x driven toolLoading magazine Bechler, integrated into the machine2-3 turning holders1 x cutter1 x drilling quillOperating hours: approx. 40500 hThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Extruder 2 screws : 100 mm Ø 15 L/D Brand: Mapre Model: E 2.66.100 Series No. 155 Engine: 30 KW (40 hp) Parallel spindles forced feeder CM 80 headcutter system with geared motor type F 30 AG 19 123752, no. 1910072-249, brand PIV Antrieb W. Reiner K.G. 2.2 KW (3 hp) Electrical control panel equipped with electronic frequency inverter and electrical temperature control panel. Ready to get started? Contact us directly! Send us a WhatsApp message to (+34) 647 590 257 or an email to infogester.es for personalized advice.

turning dia. over bed: 3.520 mmturning diameter over slide: 3.000 mmturning diameter over slide: 2.440 mmturning length: 15.000 mmControl: Sinumerik 840 D SL turning speeds: 50 U/minworkpiece weight max.: 80.000 kgturning diameter: orig. 3500 / mod. 2400 mmaccuracy +/-: 0,01 °total power requirement: 110 kWweight of the machine ca.: 154,4 tdimensions of the machine ca.: 20,7 x 6,0 m- The modernization (2012) carried out on this machine mainly comprises a new mechanical main gearbox including main spindle drive and the addition of a holding brake plus integration into the existing electrical system.- In the course of the work, it became apparent that the two double-row cylindrical roller bearings had to bereworked.Thus, the entire bearing arrangement was modified and optimally adjusted.- In addition, control and safety-related points had to be modified.- Geometric acceptance report- Temp ...

Key data: 40

2 Screw Extruder Co-rotating spindles 40 mm Ø diam, 44 L/D, Brand: Maris Model: TM40 MPL/D44 Variable motor: 75 Kw (100 hp) Year: 2000. 2 x 70% replacement spindles.

x-travel: 250 mmy-travel: 200 mmz-travel: 90 mmcontrol: 5D HSC 6000 A-axis: +/- 180 °b-axis: +25 -15 °spindle turning speed range: 40.000 U/mintool taper: HSK 25 E min./max workpiece dia.: 3 - 10 mmtool change unit: 7-fach total power requirement: 7 kWweight of the machine ca.: 0,85 tdimensions of the machine ca.: 0,78 x 1,85 x 1,165 mThe machine for dental use- suitable for metal, plastic, wood and zirconium blanks- 5 axes simultaneously- Milling spindle HFS 201 quick-change (has been overhauled)- High-frequency spindle HFS 301 quick-change (5,000-40,000 rpm, 3000 watts)- Additional tool change magazine with 14 places (linear pick-up system with collision protection)- Tool length scanning- Control software on Windows XP Professional: Adoption of DIN 66025 commands (G-code)- W.Loader workpiece changer for up to 30 blanks- Max. height of blanks: 25 mm- Extraction unit for effective di ...

Extruder 1 screw: 70 Ø diam, 35 L/D. Brand: Flag, engine: 37 KW (50 hp). No electrical panel. Ready to get started? Contact us directly! Send us a WhatsApp message to (+34) 647 590 257 or an email to infogester.es for personalized advice.

total power requirement: kWweight of the machine ca.: tdimensions of the machine ca.: m6-axis industrial robot YASKAWA MH502 CNC rotary tables1. rotary table 1 and rotary table 2limited Nmax=1.300 1/minReduction ratio I= 1:72Nmax: Reduction ratio and Nmax motor corresponds to 120°/sec on the tableMdnenn. Output = 828 NmMaximum centric loading weight = 15 kNCentering force from inside to outside clamping = 7,540 N @ 6 barCentering accuracy in the gripper = 0.05 mm [PA]Rotary field restriction depending on cable and hose situationProvided for ± 720° (provide for this in the robot controller)Motor: YASKAWA SGMRV-20ANA-YR11Milling spindle: AMTRU (CH), type Flexicut 250Gearbox: ZAE Hamburg, type: S100B-1300/65-HOX-72.0:1-3000Version: with Yaskawa servo axis + ZAE worm servo gearboxThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Key data: 60

Extruder 1 screw: 60 mm Ø, 25 L/D, brand: Flag, motor: 11 KW (15 hp). 6-speed gearbox with electrical panel. Ready to get started? Contact us directly! Send us a WhatsApp message to (+34) 647 590 257 or an email to infogester.es for personalized advice.

x-axis: 700 mmy-axis: 1.000 mmz-axis: 500 mmmax. table load: 900 kgtotal power requirement: kWweight of the machine ca.: tdimensions of the machine ca.: m3D coordinate measuring machine- PC with software, various probes- Renishaw PH10MQSoftware: PC-DMIS Pro 3.7 Maintenance Release 2The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Key data: 80

Extruder 1 spindle Brand: Bandera, 80 Ø diám 25L/D, with two speeds, alternating current motor: 55 kw (75 hp) with variable speed drive. Two replacement spindles, one for rigid PVC and one for plasticized PVC. Ready to get started? Contact us directly! Send us a WhatsApp message to (+34) 647 590 257 or an email to infogester.es for personalized advice.

x-axis: 600 mmy-axis: 300 mmz-axis: 200 mmmax. table load: 25 kgtotal power requirement: kWweight of the machine ca.: 40 kgdimensions of the machine ca.: m3D production measuring system15-inch monitor (mounted on a transport trolley)As good as new, only used 4-5 timesThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Key data: 65

Extruder 1 Screw 65 Ø diam, 30 L/D Brand: Flag engine: 30 KW (40 hp). With electrical panel. Reference: GT-4706

cutting speed: 15 - 90 m/mintotal power requirement: 2,4 kWweight of the machine ca.: 0,95 tdimensions of the machine ca.: 2,15 x 1,5 x 1,65 mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Key data: 60

Composite Tube Extrusion Line: A- Extruder, brand: Sterling, 1 spindle: 60 mm Ø 25L/D, Motor: 25 hp with variable speed drive and electrical panel. B- Head for small tube: 0.5 mm and more. C- Water-cooled bathtub: 9 meters with pump and tank. D- Tow Cart, Brand: Mild Ltd Boston: 700x150, Motor Output: 1.5kw with variable speed drive. E- Double winder with guide: 600 mm Ø

cutting diameter: 350 mmsaw band length: 5270 mmcutting width: 335 mmtable height: 800 mmcutting speed: 0-110 m/mintotal power requirement: 16 A kWweight of the machine ca.: 1,5 tdimensions of the machine ca.: 2,2 + 2 RB x 3,5 x 1,9 mCooling water deviceChip conveyorRoller conveyordiv. saw bladesThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Key data: 60

Extrusion line for the manufacture of forest protector 80 mm, composed of: -Extruder 1 spindle brand: Covex, 60 mm Ø 25 L/D, motor: 22 Kw (30 hp). With variable speed drive and electrical panel. - Stainless steel cooling tub: 2 m. With vacuum pump: 11 Kw (15 hp). - Towing trolley: 1100x220 mm, motor: 2.2 Kw (3 hp). -Die cutter and shear with hydraulic group: 4 Kw (5.5 hp). Tank: 75 litres.

pressure: 100 tchamfer lenght: 3000 mmdistance between columns: 2700 mmControl: AMADA AMNC II-PC throat: 415 mmstroke: 200 mmdayligth: 500 mmadjustment of the rear stops: 600 mmtable width: 60 mmnumber of controlled axis: 7 ajustment speed: 200 mm/secbending speed: 20 mm/sectotal power requirement: 5,3 kWweight of the machine ca.: 6,7 tdimensions of the machine ca.: mIncludes:-Matrix holder for 1V matrices, pluggable, total height with holder: 140mm-Status indicator light-5-axis backgauge with stop sensor systemFolding robot: ASTRO-100 NTIncludes:-Standard gripper-Reposition gripper on the upper press beam-Regripping support for large workpieces - pneumatically drivenTechnical data see PDF attachment.Handling robot: ASTRO-MP20Includes:-Loading table with spreading magnets-Vacuum gripper Medium and Large-Combi gripper (suction/gripping) for vertical loading-Device for vertical loading of ...

Key data: 120

Extruder 1 spindle (pelletizer). Brand: Flag, 120 mm Ø, 25 L/D, engine: 75 hp. Variable speed drive, hydraulic filter changer: 120 mm, air head cutting with pellet cooler, screen, venturi and big-bag bagging.

x-travel: 980 mmy-travel: 1080 mmz-travel: 280 mmControl: table-size: 1.125 x 1.700 mmtable height: 800 mmdiameter: 435 mmspindle pitch: 16 x 5 mmtotal power requirement: kWweight of the machine ca.: 0,8 tdimensions of the machine ca.: 2,08 x 1,98 x 2,0 mAccessories:- Tool changing station- TS20 probe- Clamping systemThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.