Extruder 2 spindles: 100 mm Ø, 15 L/D, brand: AMUT. Motor: 40 hp, electrical panel, variable speed drive, head cut to air, vacuum cleaner, venturi, rotary air pellet cooler, length: 1,80 m
according to pdf attached
Material: PVC // with degassing, counter-rotor, DC motor 29 kW, screw diameter 86 mm, L/D 16 Capacity: 150 - 250 KG/hr
Material: PVC // Details: DC motor 10 kW, screw diameter 52 mm, L/D 16, degassing, capacity: approx. 10 - 70 KG/hr.
Screw Diameter: 125 mm // Output Capacity: 500 kg/h
Material: PE, PP, PS, ABS + fillers // DC motor, DC motor, dcrunner, segmented screws + cylinders, screw diameter 2x 43 mm, L/D= 44:1, degassing with vacuum pump, Berstorff SPS FP15 control. For extra charge: Brabender gravimetric dosing, Brabender side loading ZSFE 30. Extension up to L/D 50 possible.
Material: PE, PP, PS, ABS, PA, PA 6.6 // Details 242 kW DC motor, segmented screws (2x x 64 / 40D) and cylinders, DC runners, degassing, vacuum pump, continuous nozzle. - Technikum extruder - For an additional price: side loading, gravim. Dosages.
Material: PVC // Details: DC motor 27 kW, degassing, counter-runner, capacity approx. 150 - 200 KG/hr.
according to description pdf attached
see pdf attached
PVC twin-screw extruder Screws/LD 58-125/conical Material: PVC / DC motor 32.5 kW, degassing, vacuum pump, counter-runner, dosing, (with PVC pipe screws).
COMAC compounding line twin-screw extruder co rotating screws 2x Ø 34 mm – 38 LD Segmented screws and cylinder water, water cooled incl. Heat-exchanger Extruder motor 19,6 kW – heating power approx. 20 kW installed Screw speed 650 rpm adjustable 1x degassing venting port with vaccum dome Strand-die head, moveable flange Water bath / strand cooling Pneumatic pressure rubber-roller devive 1,5 kW – frequency controlled cutting speed adjust Hard-metal cutting rotor – NEW Extruder control board Strand pelletizer Type SG 60 Up to 150 kg/h – depending on material Pneumatic pressure rubber-roller device 1,5 kW – frequency controlled cutting speed adjust Fully overhauled
Stock No. 2378 1 gebr., partially overhauled and ready to demonstrate twin screw extruder / compounding line COMAC Type EBC 32 Screws 2x Ø 34 mm – 38 LD Segmental screw and barrel water-cooled, incl. heat exchanger Extruder drive 19.6 kW, heating capacity approx. 20 kW Installed Screw speed 650 rpm-1 1x degassing zone athm. with degassing dome Strand head with quick-opening flange Water bath / strand cooling pool Strand granulator type SG The system is ready for demonstration in Wour workshop Wuppertal-Germany Test run with your material shortly possible on request. You´re welcome
We can offer 2 twin screw extrusion compoundibg lines,manufactured in 2015 diameter 75mm, L/d 52. water circle pellitzer.drive motor power 160kw.short time working, very good condition.Serious buyers contact us.
Complete extrusion line with support for sale, dispense, extrude, granulate and SAG (complete pictures in the PDF). Extruder: Feddem FED 72 MTS, 2000., 2012 general overhaul. 600-1000 kg / h with PBT, PA6, PA66, GF and impact resistant modified products. Thyssen TGE 3-72-DOS-4 transmission, 314 kW Compexmotor, 4 degassing zone with 3 vacuum degassing, 3 body parts open side feeder, new price from 690.000 € Dosage: Dosage: 6 Brabender dosing scales with control, multiple pellets/Flake car, 2 powder scales, a fiberglass scales, Transitube support for glass fibers Side feeder: Feddem/Flender Vacuum pump: Integrated Granulation: IPS SG120/7.5, 2000, 9 kW Also here: Complete solid steel frame for the feeders and water bath brushes, bagging Tower for granules with S + S all metal separator, Transitube glass fiber/material high to promote
WATER RING, HOT MELT PELLETIZER for throughput up to 500 kg/h self adjusting knives to nozzle by means of a spring which keeps knives pressed, with less wearing out and incresed efficiency 3 kw motor on cutter 3000 rpm 2,2 kw motor on water pump 3 kw motor, 1400 rpm on drying centrifuge Electric cabinet and control board
Extruder 2 corrotating spindles: 50 mm Ø, 40 L/D, brand: ICMA SAN Giorgio, with double degasser. Motor: 57.5 Kw direct current with drive. Material dispenser and thread head (spaghetti), with electrical panel.
Material: PVC // Screw diameter 52-104 mm (conical), counter-rotor, motor: 15 kW, capacity: 20 - 140 KG/hr.
Extruder 2 spindles: 100 mm Ø, 21 L/D, brand: Industrie Generali, model: CGB 100, engine: 84.7 Kw, degasser, vacuum pump, head and overhead cutting to air. Electrical panel.
Twin-screw extruder KMD 40 Manufacturer: Krauss Maffei Type: KMD 2-40 Year of construction: 2000 More details on request
Twin-screw extruder KMD 2-60 KK Type: KMD 2-60 KK Manufacturer: Krauss Maffei Year of construction: 1991 Machine number: 206317 more information on request
screw ø:: 70 mmscrew length:: 24D screw speedl:: -- U/mindrive power:: 70 kWcondition: used -Specification: Plastic extruder type K70-24D with melting pump and suction conveyor- with Maag melting pump and suction conveyor- Screw diameter: 70 mm- Screw length approx.: 1,680 mm- Length of the snail: 24D- Motor power: 70 kW- Snail geometry: classic polyphine screw, which is designed as a barrier screw. This means with shear and mixing section.- Output approx.: 120 Kg, PP standard- Dimensions W/D/H approx.: 4,000 x 1,200 x 2250 mm Package two approx.: 1,200 x 800 x 1,100 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
LEISTRITZ TWIN SCREW EXTRUDER ZSE 50 GL For PE, PP, PS, ABS Throughput rate : ca.150 – 250 kg/h Depending on raw material and feeding rate Including : Extruder constructed in 1995, reconditioned 2 x corotating screws 50 mm 32 L/D 400 rpm max screws speed 52 kw drive , 2750 rpm max speed N.8 heading areas for 28,5 kw Intensive cooling system Complete with electric cabinet EXTRUDER ONLY Ask for other parts
Material: PE, PP, PS, ABS (+ fillers) DC motor 32 kW segmented screws (2x Ø 27 mm/40D) and cylinders Gleichläufer screw speed: 1,200 rpm atmospheric degassing, Degassing with vacuum pump Strand nozzle Water bath approx. 4 m Strand granulator Control: Macromatex III Comfort Optional: Adaptation of 2 side feeds possible
Screw Diameter: 50 mm // Throughput: 120 kg/h
Material: PE, PP, PS, ABS / Details: three-phase motor, DC, segmented screws and cylinders, degassing, vacuum pump, screw speed: max. 600 rpm, control: Resotec PLC
Material: PE, PP, PS, ABS // Details: DC motor, segmented screws and cylinders, screw speed max. 300 rpm, degassing, vacuum pump, mass pressure and mass temperature sensors, strand head, control cabinet for heating and motor control. Screw Ø: 2x 67 mm L/D: 34:1 Motor: 97.5 kW (DC)
Material: PE, PP, PS, ABS // Details: DC motor, segmented screws and cylinders, screw speed max. 300 rpm, degassing, vacuum pump, mass pressure and mass temperature sensors, strand head, control cabinet for heating and motor control. Siemens Simatic OP17 controller Screw Ø: 2x 75 mm L/D: 36:1 Motor: 143 kW (DC)
Compounding extruder Material: PE, PP, PS, ABS + fillers / Details: dcising, segmented screws and cylinders, degassing, vacuum pump, screw speed max. 300 rpm, DC motor 252 kW, heating power 98 kW, incl. side-feeding Leistritz LSB 90 (screws 2x x 90 mm, drive: 3.0 kW, screw speed: max. 150 rpm), Macromate SPS visualization. (attached photos are BEISPIELBILDER)
Extruder 2 corrotating spindles: 125 mm Ø, spindle: 2650mm (21D), brand: LMP (Maris). Motor: 37kw, 220/380V, variable speed.
Extruder 2 corrotating spindles: 65 mm Ø, 30L/D, brand: Maris, model: TM-65 V. Shirt and spindle compatible by segments. Degasser, motor: 90 KW DC, with variable speed. Thread head and 2 spare spindles.
Twin Screw Extruder Metalchem 2T9/4,5 for PCV, Made by Metalchem out-put 100 kg/h
manufactured in China with german overhead and according to europ. Standards
TECNOVA TWIN SCREW EXTRUDER Including: loading hopper Extruder with a.c.355 kw drive with inverter N.2×128 mm screws 40 L/D N.2 vacuum degassing points with 2 pumps Semi-automatic screen-changer with 300 mm. screens CAN BE FITTED WITH FULLY AUTOMATIC SCREENCHANGER NEW OR USED Hydraulic power station Pressure transducer Die face hot melt pelletizer with PP or HDPE die Control panel Stainless steel water collection tank with recirculating pump Stainless steel drying centrifuge 2 way new vibro classifier Electric cabinets for complete management of the line Pulpit control for operator User’s manuals and drawings, CE compliance The line is offered RECONDITIONED The video shows a similar machine already reconditioned by us.
Stock No. 2590k 1 used compounding pelletizing line, throughput up to 1200 kg/h depending on material, consisting of: 1x Grav. Dosing system 5-component SITECOM incl. control 1x Extruder twin screw THEYSOHN type TSK 90 Screws 2x Ø 90 mm – 36 LD synchronization Segment screw and barrel, water / medium cooled Screw speed up to 300 rpm-1 Extruder drive 255 kW-DC 1x side dosing extruder TSD 75 twin screw with drive 3 kW 3x degassing openings 1x melt filter No. 1 type K –HS- Y with sieve 176 mm, incl hydraulic 1x melt pump with drive 22 kW 1x meelt filter No.2 type K-SWE 180 RS back-flush self-cleaning incl. hydraulic 1x strand head with 32 x Ø3.5 mm holes 1x strand cooling pool 620 x 5000 mm 1x string granulator SG 300, drive 11 kW Screen control ResoTec / control cabinet Visit / demonstration at short notice by arrangement. Further compounding lines and acce ...
Material: PVC / Details: DC motor 70 kW, degassing, counter-runner, vacuum pump, screw diameter 88-151 mm (conical) Throughput: approx. 300 - 400 KG/hr.
Extruder 2 spindles: 50 mm Ø 12 L/D, motor: 4.5 kw, without electrical panel.
Extruder 2 spindles 60 mm Ø, 18 L/D, brand: Volcan. Engine: 15 hp (11Kw). Material dispenser and electrical panel.
Extruder 2 spindles 18L/D, model: BK-50-93, tapered spindles, brand: Volcano, with motor: 25hp, with variable speed drive. Degasser and dispenser of material and electrical panel.
Screw Diameter: 71 mm // Throughput: 1000 kg/h
