used Extruders for sale

Furnace 1200 temperature range 100 - 1200 Celsius inner dimensions 1x1x2m power 50kW PLC could be various size

Strainer Bandera 150mm with 75kW motor. This machine has been overhauled by Deguma and little used after that. More info as attachment.

Barwell MR400 Top Load Ram Extruder

1 x twin screw extruder, used Manufacturer: Battenfeld-Cincinnati Type: ATGOS 93P-28D Year of construction: 2007 Operating hours: approx. 62,000 hours Screw diameter: 2 x 93 mm (parallel) Screw length: 28 x D Screw speed: max. 26.0 1/min. Cylinder heating/cooling zones: 5/3 Adaper heating zone: 1 Tool heating zones: 5 Drive power: 50 kW (AC motor) Connected load: approx. 156 kVA System control: EXcPRO-XP with 10.4' TFT colour display Accessories: dosing unit (synchronized), material hopper, Degassing system with vacuum pump Output: max. 300 - 380 kg/h with U-PVC, depending on the material and product Note: new gearbox installed in 2014. Remark: The extruder is expected to be in production until the end of April 2023.

Baughan 60mm Silicone Extrusion Line Year 1999 Consisting of; •Baughan Extruder •Small Horizontal shock oven •Haul-off (caterpillar style) •Flying knife cutter •Single belt haul-off •Rotary rack trolley •Trays

PET Foam Extrusion Line Construction year : 2003 N.1 Twin-Screw-Extruder BC FOAM SPA 180 XPET Throughput rate 400 kg/h, Screw diameter: 179 mm N.1 Coextruder MAC-GI Gravimetric Dosing Unit COLOTRONIC Additional elements and accessories.

New and unused machine Berstorff twin screw extruder ZE 130A Extruder screws: 2x140 mm L/D 30:1 Built: 1988 (unused) Drive: DC motor - 250 kW Screw rotations: 300 rpm Extruder heating: 70 kW 2x Degassing complete screw in original packaging 2 machines available Location Germany, Wuppertal Visit possible, appointment by appointment

- Year of manufacture 1985 - manufacturer Bielloni Castello Italy - Screw diameter: 50 mm - L/D ratio: 22 - Rotation speed: 20-100 r/min - Planetary gear (silent) - number of heating zones on the cylinder: 3 including two cooled - cylinder cooling: fan cooling, - water backfill cooling - Main motor power: 49.9 kW, DC - Temperature controllers: K 49 Italian production - regulation "fuzzy control" - Extruder length 2300 mm - Extrusion axis height 500mm - Capacity: 40 - 50 kg/h - Ability to measure mass pressure

- year of manufacture 1985 - manufacturer Bielloni Castello Italy - Screw diameter: 60 mm - L/D ratio: 24 - Rotation speed: 20-100 r/min - Planetary gear (silent) - number of heating zones on the cylinder: 3 including two cooled - cylinder cooling: fan cooling, - water backfill cooling - Main motor power: 49.9 kW, DC - Temperature controllers: K 49 Italian production - regulation "fuzzy control" - Extruder length 2400 mm - Extrusion axis height 500mm - Productivity:60- 90 kg/h - Ability to measure mass pressure

Stock No.2452 1 used, partially overhauled and functionally tested pelletizing line Throughput up to 500 kg/h depending on the material, consisting of: Tamping unit Kreyenborg SW 100, drive 7.5 kW Extruder BKG single screw Ø 100 mm – 35 LD, Drive 132 kW – AC frequency controlled Screw speed up to 143 rpm.-1 screw depth 14 mm Heating capacity approx. 35 kW installed 1x athm. Degassing zone Screen-pack-changer Double piston Kreyenborg K-SWE 160 RS back-flush self-cleaning with screen surface 244 cm² BKG underwater pelletizer AH 300, complete with: Start-up valve incl. Hydraulic station Granulator with drive 4 kW Water pump 2.2 kW By-pass system, water tank with heating 9 kW installed and heat exchanger BKG granulate centrifuge TWE 300 with drive 3 kW pellet classifier table Control board and Siemens material feed conveying, big-bag filling station � ...

see PDF attached Condition very good

Coperion Werner and Pfleiderer Extruder ZSK 43 MV, very good used condition, was used for the production of powder coatings. The extruder has not run for many years (only for testing purposes) and has few operating hours for its year of construction. The extruder is sold completely with control cabinet.

Extruder for pellet manufacturing Brand: Erema, model: RM160 TF-VSV, year: 2001, 160 mm Ø, double degasser, motor: 200 kw, agglomerator with motor: 132 kw, hydraulic filter changer, wire head, bathtub, vacuum pump and Noodle Previero with vibrating screen. Complete dehumidification installation.

GENERAL PLASTICS POLYPROPYLEN-EXTRUDER PB65-2 Year 1997 Lenght 6300 mm Width 2500 mm Hight 4200 mm Weight 3700 kg Material PP Output 65 kg/h Thickness 0,015 – 0,1 mm Tube width 250 – 700 mm Rewinding 5 – 60 m / min Power 72 kW

CRAMMED FEEDER different sizes for any extruder capacity for light weight materials including motor gear 15 kw crammed screw in tempered steel steel hopper thrust bearing assembly grooved tempered feeding piece Control panel for synchronization with extruder

Co-extruder, used with height-adjustable and swivelling process unit Manufacturer: IDE Type: MEB-45/4x25D Year of construction: 2004 Machine no.: 245 Screw diameter: 45 mm Screw length: 25 x D Screw speed: max approx. 80 1/min. Drive motor: DC motor Motor power: 14 kW Cylinder heating/cooling zones: 4/3 (air cooling with fan) Adapter heating zone: 1 Tool heating zones: 2 Temperature controller: 7 digital temperature controllers Output: approx. 5 - 50 kg/h for PVC granulate Connection load: approx. 24 kW Accessories: Material hopper and chassis

Refurbished: 2020 // Capacity: 800-1000 kg/h //4 screens - two each piston

Materials: PP // Film Width (Max): 1400 mm

The: 300 x 1.4 Screws: 65 x 30, ld, md 80 x 30, ld, md 65 x 30, ld, md Working width Max: 1740 mm Min: 750 mm Productivity Max: 2800 kg/h Min: 1200 kg/h 2 winders Dosage system, sismetric Line control, sismetric

Material: PE, PP, PS, ABS / Details: DC motor 220 kW, degassing, dcrunner, screw diameter 70 mm, LD: 32, Throughput: approx. 400 - 600 KG/hr.

Multiple extruders

According to the description below

width : 2X1780 mm capacity kg/h :2.500Kg/24h: 104Kg/h the machine is divided as follows Blown film of 2 or 3 layers A/B or A/B/A. Extruder A : 60/30D Extruder B : 90/33D heating : 5 heating zones Width : 2 X 1780 mm Output : 2,5t/24h state : ready to test automatic pellet loader extruder group 2 extruders Extrud A: Ø60/30D: Extrud B 90/33D extruder :cylindrical die forming unit :calibrator cooling of the primary film with open circuit of cooled water regulated. primary Film dryer by air 3 levels of oven to heat the film to be blowned Thermo-regulator 5 Zones for each extruders unit layer unit: A-B or A-B-A cooling of the primary film with open circuit of cooled water regulated. primary Film dryer by air 3 levels of oven to heat the film to be blown winding unit: 2 winders – Width 1.780mm each Lateral trimming cutting system of the bubble knife unit for longitu ...

Single screw extruder, Troester year of manufacture 1992 Auger type: 38CrMoA1A, nitrided Cylinder: 38CrMoAlA, nitrided, air-cooled cylinder; Motor power: 55kW A.C. engine – no speed control Engine speed: 1480rpm Screw Diameter:90mm; L/D=38 Degassing system: vacuum pump : 3kw Double degassing Heating zones: ceramic heaters, air-cooled Cylinder cooling - air Output: up to 180 kg/h Net price; 8 500 Eur – cracked reducer body – to be repaired – poor condition of the plasticizing system Net price; 11 900 Eur – repaired reducer body – started

Manufacturer: Paul Troester Maschinenfabrik/Hannover Year of construction: 1978, machine was in operation until the end of 2015 Screw diameter: 150 mm Length: 16 D (approx. 2,400 mm) Screw speed: 2.5-25 / 4 - 40 U/Min. Centre height of the extruder: 1,100 mm Type of gearbox 3 TH 990 K / 2s, 2 speeds. Gear ratio: = i1 16.5: 1 i2 = 26.4: 1 Maximum gearbox output torque: 45,000 nm Maximum permissible injection pressure: 350 bar without limitation through the extrusion head. The extruder will be overhauled and designed/changed according to customer's specification. Below pictures 1-4 show an extruder overhauled by us.

PE 300 extruder built in China in 2011 by Zhangjiagang Wuhe Machinery Co. LTD. is designed to produce parts from a wide range of materials. The complete PE and PP plastic extrusion line includes a compactor, screw, cylinder, conveying system, heating system and temperature control panel. The production process begins by heating the plastic to a maximum temperature of 300 °C in the 11 heating zones of the PE 300 granulation line, all controlled by thermoregulators. The extruder then presses the material further through a 100 mm-diameter screw located in a cylinder with protection against abrasion and rusting. At the very end, the plastic produced is moulded by the head, giving it the appropriate properties and shape. The plastic processing machine is capable of producing 250 to 300 kg of material per hour of operation. The plastic processing machine is equipped with thermoregulator ...

Year of Build: 1993 Complete wardrobe DC Motor Platifying system in poor condition Complete heating system

Coperion Werner and Pfleiderer extruder ZSK 53 with dosage. The extruder can be seen in our warehouse of Arnsberg.

Varex 3-layer blowfilm-extruder Head diameter: 630 mm Screw diameter: 70-90-70 mm( die gap: 2,4) Film width: 1390 – 2580 mm Film thickness: 10-200 my Output: max 480 kg /hour Winding diameter 1200 mm Core diameter 76/150/152 mm Energy: 295 kW/h Treatment: in+outside

Hopper – gravity charge Auger: 38CrMoA1A, nitrided – new Cylinder: 38CrMoAlA, nitrided, bimetallic, air-cooled – new ; Motor power: 160 kW A.C. controlled by inverter Screw diameter: Ø130mm; L/D=38:1; Maximum speed of screws: 140rpm Degassing system: vacuum pump : 3kw Double degassing Heating zones: air-cooled heaters Air cooling, cooling power: 0.37Kw×7; 7 cylinder heating zones + 5 additional zones per head Productivity: up to 450 kg/h