extruders used for sale (451)

filtration performance: . l/minfleece width: . mmtemperature: . °CThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

x-travel: 1600 y-travel: 1300 mmz-travel: 1450 mmControl: Siemens 840C Tool changer: 100 Posnumber of spindle speeds: 10-4000U/min tool taper: Iso50 A-axis: -100°/+10° c-axis: 360.000° 0total power requirement: kWweight of the machine ca.: tdimensions of the machine ca.: mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

weight max.: 20 taxial load -forward: 9 taxis load in the back: 9 tBrake system: size of tire: 550/45-22,5 total power requirement: kWweight of the machine ca.: tdimensions of the machine ca.: mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Key data: 180 mm

First-class renovated extrusion recycling plant made by EREMA Intarema 2018 TVEplus for the processing of post-consumer polyethylene and polypropylene, capacity up to 2,400 kg/h, built in 2019 for sale. Auch + Technik e. Kfm. D-73728 Esslingen Phone +0049 1577 5329827

Haul-off for profiles, used and overhauled Manufacturer: Blake Type: 303-1600-180 Year of construction: 1995/2021 Serial.-No.: 637 Contact length, effective: 1600 mm Pad width: 180 mm Design: smooth pads at the bottom and top Haul-off force: approx. 20,000 N Hail-off speed: 0.1 -5.0 m/min. Drive Motor: DC Shunt Motor Motor power: 5.0 kW Dimensions: 240 x 90 x 175 cm Weight: approx. 950 kg Remark: The electrical control cabinet was renewed in 2021. The machine has been cleaned, repainted and checked for function. In addition, a new control panel as a remote control incl. 10 m long control cable.

Key data: 63 mm, 1300

Twin screw extruder, conical Manufacturer: Reifenhäuser Type: BT 1000-2-63 K Year of Make: 1994 Machine No.: 32061 Working hours: 32,303 h Screw geometry: conical for PVC-hard profiles Screw diameter: 63 – 121 mm Screw length: 1300 mm Screw speed: max. approx. 32 1/min. Nominal torque of the gearbox: 1000 daNm Dynamic load rating of the return pressure bearing: 103600 daN Engine power: 43.0 kW, Drive motor: Baumüller DC motor Cylinder heating/cooling zones: 4/3 (air cooling with fan) Adapter heating zones: 1 Tool Heating Zones: 5 Temperature control: digital temperature controller (2 x PSG Multipact 88) Max. permissible mass pressure: 500 bar Output capacity: approx. 150 - 200 kg/h for PVC-hard profiles Accessories: Dosing device and material hopper Extrusion height: 1150 mm Dimensions: 4250 x 1200 x 1750 mm without hopper (LxWxH) Weight: approx. 3000 kg Cond ...

screw ø:: 65 mmscrew length:: 17D screw speedl:: -- U/mindrive power:: 20 kWCondition: used -Specification: Twin screw plastic extruder line Overhauled 2012, consisting of:twin screw extruder make Weber DS 65- year of construction 1982- screw diameter: 65 mm- Screw length: 17D- Output approx.: 80 kg/h, depending on mould and melt pressure- Main motor power: 20 kW, with frequency converter- 4 cylinder zones, 8 mould zones- Degassing with filter container- Volumetric dosingCalibration table IDE ME 14/3- Year of construction 1996- Length: 3m- 2x vacuum pumps: 3 kWCaterpillar haul-off IDE ME 32/3- Year of construction 1997- Contact length: 1,200 mm- Cleat width: 160 mm- Speed: 1 - to 10 m/min- Pneumatic clampingCircular saw IDE ME 52/3- Year of construction: 1997- Saw blade diameter:  ...

screw ø:: 120 mmscrew length:: -- screw speedl:: -- U/mindrive power:: 36 kWCondition: used -Specification: Single screw TPE extruder type 120 - second-hand- Screw diameter: 120 mm- Dimensions length approx.: 3.000 mm Width approx.: 1,700 mm Height approx.: 1,900 mm- Output approx.: 215 kg/h- Motor power: 36 kW- Weight approx.: 2,300 kgThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Extrusion line for 3D monofilament composed of: - 1-spindle extruder, brand: Bandera, 45 mm diam 25 L/D, motor: 10 hp. With dryer hopper: 100 L, master dispenser. With electrical panel and variable speed drive. - Head for 3D monofilament. - 3 stainless steel bathtubs: 2 m. - Stretching: 4 rollers. With variator. - 2-point monofilament thickness gauge. - Winder: 480x500 mm diam. For large coils. - Large coil unwinder and double rewinder for small coils. - Dehumidifier Brand: Puchades, power: 6.7 KW (9.1 hp), 14 Amp, year: 2014.

Key data: 90 mm

EREMA Series Type 1109 TVEplus ecoSAVE for processing polyethylene (PE), polypropylene (PP) and polystyrene (PS), with screen changer, degassing for processing printed films. Output up to 450 kg/h, electrics 460 volts, 60 hertz (US standard), available immediately. Auch + Technik e. Kfm. D-73728 Esslingen Phone +49 1577 5329827

Key data: 90 mm

A first-class extrusion recycling brand EREMA Series Type 1109 TVEplus ecoSAVE for processing polyethylene (PE), polypropylene (PP) and polystyrene (PS), with screen changer, degassing for processing printed films. Output up to 450 kg/h, electrics 240/400 volts, 50 hertz, immediately available. Auch + Technik e. Kfm. D-73728 Esslingen Phone +49 1577 5329827

Winder : Bandera Model W 400/1 Contact winder / surfacewinder Roll diameter max: 1200mm Roller width: 1200mm Roll width max: 1100mm Speed: max. 55m/min Longitudinal cutting device 2 or multi-lane Side Slitting Device Automatic roll change Cross-cutting device Role magazine Calibration device Reifenhäuser Low-friction rollers motor adjustment Adjustment range: for 500-1100mm laying width takeoff unit: Type TPE-1200 Side gusset insertion device Drive: 4-pole 4kW with axial fan Electric cabinet

Industrieöfen- Fertigung und zirlguss Reparatur jeglicher Art Wartung und Einregulierung von Industriebrennern Industrieöfen für Öl, Gas oder elektrisch beheizt Umfangreichen Sortiments an Feuerfeststeinen, Feuerfestmassen, Isoliermaterialen und Gießereihilfsstoffe namhafter Hersteller. Renovierungen und Instandsetzungen von Ofenanlagen Brenner einstellungen von Ofenanlagen schoenheider Modernisierungen von Ofensteuerungen Umrüstu ng von elektrischen Öfen auf gasbeheizte Öfen Umrüstung alter Heizsysteme auf Rekuperation gienanth Öfen Verzinkungsofen Ve rgüteofen Anlassofen Industrieöfen Glühofen Ovens laboratory ovens industrial furnaces industrial furnace plants Industrial Furnaces high-temperature chamber furnaces hardening furnace anlageHärteöfen Annealing furnaces Conveyor belt Abg aswäscher Abkühlungsöfen Abwärmerückgewinnung Aluminiumgiessereimaschine ...

Nordson / Puffe Extruder Plant Ex20 -1xPS01-1xPE20-1 for melting hot melt adhesives and thermoplastics, feeding as granules. Melting capacity according to the manufacturer's specifications up to 20 litres/h (EX20) Price: 45.000, -- € plus 19% VAT (Gross price incl. VAT 53.550, -- €) EXW Manufacturer: Nordson / W. Puffe Hotmelt-Technology Model No.: Ex20 -1xPS01-1xPE20-1 Year of manufacture: 05/2006 Serial No. 226260231/001 Power: 15 kW, connection 380V three-phase current Emergency stop, traffic light, CE mark Made in Germany Compact system mounted on a stable rolling frame (H= 198 cm, W= 160 cm, D= 110 cm) consisting of Nordson extruder, gear metering pump, Lenze worm drive, control cabinet with Allen-Bradley control, graphical user interface, storage tank, operating manual. Auxiliary: Labotec Minifeed Suction Conveyor MF60 Serial No. 12-103-00669 (Owner's man ...

x-travel: 13000 mmy-travel: 2750 mmz-travel: 3000 mmturning speeds: 600 U/minspindle taper ISO: 50 milling head: 4 total power requirement: kWweight of the machine ca.: tdimensions of the machine ca.: mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Winder : Bandera Model W 400/1 Contact winder / surfacewinder Roll diameter max: 1200mm Roller width: 1200mm Roll width max: 1100mm Speed: max. 55m/min Longitudinal cutting device 2 or multi-lane Side Slitting Device Automatic roll change Cross-cutting device Role magazine Calibration device Low-friction rollers motor adjustment Adjustment range: for 500-1100mm laying width takeoff unit: Type TPE-1200 Side gusset insertion device Drive: 4-pole 4kW with axial fan Electric cabinet

Extrusion recycling line made by EREMA type that has only been in use for a few years VACUREMA ADVANCED 1310T for the processing of rPET, Year of construction 2017, commissioning 2019, Capacity 600 kg/h, Approval in accordance with the standards of the F.D.A. (USA) and ESFA (EU) for the approval of the rPET granules produced with it is available. You can find more details at EREMA "Vacurema Advanced". Delivery Time: Short Term. Auch + Technik e. Kfm. D-73728 Esslingen Phone +0049 1577 5329827

Plasmac ECO60HC recycling machine from 2014. Output approx. 100 - 120 kg/hour. A barrel and the screw is refurbished A motorized roll feeding unit is included Complete with water chiller unit.

Key data: 75 1/min

This WEBER extruder is in machine storage at Plastima Used Machinery. The machine comes from 1997 and is in great condition. Brand: Hans Weber GmbH Model: NE 7 042 Type screw: single screw Year of construction: 1997 Screw Ø: 75mm Working hours: 58.668

Blown film line especially for PP processing length: 6,300 mm width: 2,500 mm height: 4,200 mm Weight: 3.700 kg blowing capacity: 65 kg/hod. Film Thicknes: 0.015 – 0.1mm film width: 250 – 650mm Die- diameter 65 mm Winding speed: 5 – 60m/min. Power consumption: 72 kW

1 Screw Extruder for Sale Brand: Maquiplast Diameter: 80 mm Ø L/D ratio: 20 L/D Engine: 30 kW (40 hp) Variable Speed Drive: Delta For more details or to make an enquiry, please contact us.

Key data: 140 mm

We offer you an EREMA extruder that has been completely remanufactured in-house for sale. It is an EREMA 1514T, the machine is completely mechanically and electrically prepared by us before delivery, all components that do not meet our criteria are replaced with original EREMA spare parts. The machine is designed for a throughput of up to 1100kg per hour and is suitable for PE as well as PP. If you are interested in this machine, please do not hesitate to contact us!

Key data: 140 mm

We offer you an EREMA extruder that has been completely remanufactured in-house for sale. It is an EREMA INTAREMA® 1714 TVEplus®, the machine is completely mechanically and electrically prepared by us before delivery, all components that do not meet our criteria are exchanged for original EREMA spare parts. The machine is designed for a throughput of up to 1200kg per hour and is suitable for PE as well as PP. If you are interested in this machine, please do not hesitate to contact us!

x-travel: 3000 mmy-travel: 2500 mmz-travel: 1000 mmControl: Siemens type: 840 DFeed: 5-30.000 mm/minTable area: 2000x2170 mmtable load: 1500 Kg/m²T-slots: 22 H9distance between uprigths: 2500 mmspindle turning speed range: 6000 U/minspindle drive: 36 kWspindle taper: HSK 100Tool changer: 30 total power requirement: kWweight of the machine ca.: tdimensions of the machine ca.: 8x6,4x4,4 mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

GWELL GWC 80-156 WPC production line manufactured in 2015 is characterised by high production efficiency. WPC boards are made by combining natural components with thermoplastic polymers. This results in a material with the high aesthetics of wood and the exceptional durability of plastics, distinguished by full resistance to fungus, insects and various atmospheric factors. The production line consists of: – GWC 80/156 twin-screw extruder – GWC 65/132 twin-screw extruder – CUT 240 saw – CAL 14000/6 calibrating table – ROL 240 2-caterpillar haul-off – unloading table The WPC profile extrusion line is offered with optional heads for forming different types of profiles from these products. To date, the machine has only been in operation for a dozen days and has not been used at full production scale. For an additional charge, equipment cooperating with the line can ...

Extruder 1 screw: 70 Ø diam, 35 L/D. Brand: Flag, engine: 37 KW (50 hp). No electrical panel. Ready to get started? Contact us directly! Send us a WhatsApp message to (+34) 647 590 257 or an email to infogester.es for personalized advice.

Key data: 50 mm, 30

Used extruder in good condition with screw size: diameter 50 mm x 30v grooved intake and degassing zone Type RH 241-1-50-30v with DC drive 30.2 kW Built in 1993 Immediately available without control cabinet With control cabinet 4-6 weeks delivery time

Key data: 60

Extruder 1 screw: 60 mm Ø, 25 L/D, brand: Flag, motor: 11 KW (15 hp). 6-speed gearbox with electrical panel. Ready to get started? Contact us directly! Send us a WhatsApp message to (+34) 647 590 257 or an email to infogester.es for personalized advice.

PVC sheet extrusion line with head: 280mm, composed of: - 2-screw extruder, brand: Weber, model: DS.8.22, motor: 30 Kw (40 hp), load doser, degasser with vacuum pump. Variable speed drive and electrical panel. - Wide blade head: 280 mm. - Calender, width: 300 mm, diameter: 150 mm. 3 water-cooled rollers. With stretching. - Ink baths, dryer, stretch for several coats of paint. - Cutting shear. - 1-reel winder, width: 300 mm. - Various replacement rollers for ironboards, printers and engravings (drawings on foil). Ahem: Wood simulation. Ready to get started? Contact us directly! Send us a WhatsApp message to (+34) 647 590 257 or an email to infogester.es for personalized advice.

Key data: 17 mm, 40 , 1200 U/min

Kategorie / Category: Twin-screw extruder / Twin-screw extruder Nummer / Number: DE27684 Manufacturer / Manufacturer: Leistritz Typ / Type: ZSE 18 HPe Baujahr / Year: 2009 Capacity: approx. 40 - 60 kg/h Motor: 9.4 kW AC max. screw speed: 1,200 rpm Screw diameter: 2 x Ø 18.8 mm L/D: 40:1 Material: PE, PP, PS, ABS + fillers // more details: synchronous, atmospheric degassing, segmented screws and barrels // Control: MacromateXX Siemens with visualization //