We use cookies to optimize our website for you and to be able to continuously improve it. By continuing to browse the site you are agreeing to our use of cookies.
Disagree
121,918 used machines on RESALE, but how to find them? Machine Search
maximum number of results exceeded > 1000
please refine your search
used
Mezzanine platforms System platforms approx. 17 x 6 m IMMEDIATELY AVAILABLE SECOND-HAND GOODS DATA: L : approx. 17 m B : approx. 6 m Lower edge of the stage : approx. 2.54 m Top edge of the stage : approx. 2.85 m Total area : approx. 102 sqm Load : 500 kg / sqm Covering : 38 mm chipboard Support grid : approx. 4.15 x 3.0m without stairs. without railing (available on request) Used goods from stock Wietmarschen Scope of delivery consisting of: 15 x support 16 x main girder approx. 300 cm 28 x secondary carriers approx. 415 cm 02 x cross + tensioner incl. 102 sqm chipboard, natural , used goods incl. screws & fastening material Price: 9.180 € net plus legally valid VAT You will receive an invoice with VAT.
used
Meva Alustar The lightweight AluStar universal formwork for the wall. Top wall formwork in terms of weight and performance perfect as a supplement to large-area formwork where no crane can reach. Best results in residential and commercial construction thanks to the Alkus all-plastic sheet. • Handle profile on all elements • Snap edge on the large elements • Element widths up to 90 cm Meva Alustar The lightweight AluStar universal formwork for the wall. Top wall formwork in terms of weight and performance, perfect as additional large-area formwork where no crane can reach. Best results in residential and commercial construction thanks to the Alkus solid plastic panel. • Handle profile on all elements • Knuckle edge on the large elements • Element widths up to 90 cm
used
TEKO mezzanine incl. floors, 2x stairs, 2x pallet transfer station & railing Current price € 60.000,- EXTREMELY LOW PURCHASE PRICE! Detailed info: A very well preserved 2-storey mezzanine floor from TEKO from 2016. Current original price without construction is about € 60,000 €! The price includes the floors, 2 stairs, 2 pallet transfer stations and the railing. The mezzanine floor must be dismantled and transported away by the end of April, if necessary a dismantling can be organized by the former supplier (dismantling costs: approx. € 7,000). Area: 1st floor: approx. 143 m² 2nd floor: approx. 43 m² Height: Top edge 1st floor area: 2,800 mm Upper edge 2nd floor area: 5,600 mm Accessories: Incl. floors, 2x stairs, 2x pallet transfer station & railings All information without guarantee according to manufacturer / supplier!
used
MARK ANDY P5 – 430mm (8-colour) Age: 2017 8 Colour (Flexo) • Unwind Rewind ProLed System and Dryer The Cutting BST Powerscope 5000 Inspection System Sheeting station (Cross) Delam/Relam Cross cutting device 1 delivery belt Mark Andy VPM 400 Panel Mount Machine Meech web cleaning - double sided 2 PitStop trolleys to hold printing cylinder ink trays Impression and magnetic cylinders 48 impression cylinders 7 magnetic cylinders 2 ink trays with non-stick coating Servo-controlled feed unit with closed control loop 1 single-sided unwind for roll diameters up to 40 inches (1016mm), Vertical dancer system, web edge control, closed control loop 1 ultrasonic web edge control with 2 sensors 1 ultrasonic web break control Printing unit: Print and process maximum width 17 inches 431.8 mm Maximum web width 17.25 inches 438.2 mm Min. print processing width 8.5 in 216 m ...
used
Type: W/ARW 2200/12 Flying Splice Comm. 2011-001.1 Working width: 2200 mm Finished roll weight max. 2000 kg Finished roll diameter max. 2x 1200 mm Finished roll width min. 800 mm; max. 2200 mm Material Paper/ Foils 75 μm – 1000 μm Machine speed max. 1500 m/min Depending on the type of material and material thickness achievable Web tension: max. 1000 N Finished roll sleeves: inside 152.4 mm outside 162.4 mm - Type of cardboard sleeve, plastic - Sleeve tolerance according to DIN 6748 or 55470 Unwinding: Type ARW 2200/12 Unwinding: axisless 2 x 1200 mm; sleeve holder 6" L.W. (other dimensions with additional accessories possible) Sleeve holder: 6" L.W. (other dimensions with additional accessories possible) Pulleys: DM approx. 150 mm Brake: Generator brake with energy recirculation, control via ultrasonic sensor Path control: Edge control E&L with ultrasonic sens ...
used
Edge strip shredder for edge trimming plastic films.
used
Number of sanding units: 8 st. sanding width: 150 mm Machine can be inspected during production! Leistomat - Finisch and intermediate leveling machine Löwer LZ 8 -------------------------------------------------- ------------------- for finish sanding (smoothing, defibering and edge breaking) or intermediate sanding profiled window latch - Finish and intermediate sanding machine with eight sanding blade aggregates, 2 surface units at the top (synchronism / counter-rotation) 2 surface units below (synchronism / counter-rotation) 4 profile units with angled arrangement top right, bottom right, top left, bottom left, all mating - linear guidance of all grinding units over Linear ball bearing sets on hardened shafts - Timed immersion of all in the opposite direction rotating grinding units directly above the incoming Workpiece edges to avoid looping through the Primer in the front edge area ...
used
Fully automatic recycling system for edge trim Compactly designed, no operating personnel needed most of the time, top quality end products. INTAREMA® K transforms edge trim efficiently and carefully into high quality, clean pellets. Up to 100% of pellets returned to the production process.
used
Description Transnorm curve belt – curve belt conveyor 180 YOC 2008 Angle 180 Head difference 400mm (by adjustable feet) Bandwidth 600mm Nominal radius 600mm Width of the curve outside (distance from edge to edge) 187cm
used
NOMAPACK® WS is the innovative transport protection for windshields and glass products. The additional inner hole reinforcement prevents sharp edges from piercing the profile and thus provides perfect protection for your product. Patented glass edge protection Unique special profiles reinforced with internal holes Efficient protection against scratches and breakage Applications: Glass edges Windshields Heavy, sharp-edged objects Shipping is paid for by the customer, otherwise we are happy to come and pick it up. If you have any further questions, please do not hesitate to contact us or give us a call. ------------------ NOMAPACK® WS is the innovative transport protection for windshields and glass products. The additional inner hole reinforcement prevents sharp edges from piercing the profile and thus provides perfect protection for your product. Patented gla ...
used
WEINIG / GreCon Short Wood Finger-jointing Line Ultra TT Data of the system: • Wood inlet length (min. - max.) 150 - 1000 mm (1300 mm) • Reference timber inlet length at the finger-jointing line 400 mm • The length of the wood to be processed must be at least 25 percent longer than the width of the wood to be processed • Wood thickness (min. - max.) 20 - 80 mm • Reference wood thickness 28 mm • Wood width (min. - max.) 40 - 205 mm • Reference wood width 90 mm • Reference wood cross-section 28 mm x 90 mm • Wood outlet length (min. - max.) 3000 - 6100 mm • Reference wood outlet length 6100 mm • Tine profile (length) 10 – 11 mm • Max. wood cross-section for processing softwoods (with specified tine length) 100 cm² • Max. wood cross-section for processing hardwoods (with specified tine length) 80 cm² • Glue type PVAC • Species: Softwood / ...
new
Aluminium riser conveyor belt incl. substructure increasing range starting from 50mm (customizable) Discharge range 1500mm (customizable) Conveyor belt width 500mm (adjustable) We supply our conveyor belts in PVC, PU or rubber. PVC conveyor belt incl. carrier and shaft edge Drive: Motor 0.25KW ( adjustable ), speed 0.3m/sec Connection 220/240V, 50Hz protection class IP54 Drive etc. ready for connection, motor control optional 6x adjustable machine feet for alignment Shaft edge: 40x35mm (adjustable) T-20 studs - 400mm pitch (customizable) 2-layer particularly transversely stable Our core competence lies in providing the customer with exactly what he really needs. Together with our customers, we develop customer-specific, individual solutions and supply corresponding systems from our own production. Feel free to contact us by phone to find a suitable solution for your ...
new
Aluminium angle conveyor belt incl. mobile substructure horizontal range 1500mm (adjustable) Rising range 2500mm (customizable) Angle in the kink freely selectable: 30, 35, 40 or 45° Polyamide swivel castors with parking brakes Conveyor belt width 400mm (adjustable) We supply our conveyor belts in PVC, PU or rubber. PVC conveyor belt incl. carrier and shaft edge Drive: Motor 0.25KW ( adjustable ), speed 0.3m/sec Connection 220/240V, 50Hz protection class IP54 Drive etc. ready for connection, motor control optional 6x adjustable machine feet for alignment Shaft edge: 40x35mm (adjustable) T-20 studs - 400mm pitch (customizable) 2-layer particularly transversely stable Our core competence lies in providing the customer with exactly what he really needs. Together with our customers, we develop customer-specific, individual solutions and supply corresponding systems f ...
used
LeoMat Digitakt 330 SFR – Slitter/Rewinder/UV-Flexo/Laminating Year of manufacture: 2011 Servo drive Job memory up to 50 jobs Register control: Semi- and fully rotary electronic motor control Electronic web edge control Waste and misprint stop Unwind shaft: d=76mm Unwind diameter: 700mm Rewind shaft: d=76mm Rewind diameter: 550mm Automatic web stop at machine stop Flexo printing unit GALLUS EM 340 Web width: 340mmm Cliché 1.14mm Fully rotary register control including servo drive Die-cutting and printing of materials UV drying Web width: 410mm Laminating Pressure station mounted on printing cylinder Punching unit LeoMat L Adaptation of the GALLUS R250 magnetic cylinder Rotometrics impression cylinder Grid rewind servo driven Integrated edge trim sucti ...
new
Aluminium angle conveyor belt incl. mobile substructure horizontal range 1500mm (adjustable) Rising range 2500mm (customizable) Angle in the kink freely selectable: 30, 35, 40 or 45° Polyamide swivel castors with parking brakes Conveyor belt width 400mm (adjustable) We supply our conveyor belts in PVC, PU or rubber. PVC conveyor belt incl. carrier and shaft edge Drive: Motor 0.25KW ( adjustable ), speed 0.3m/sec Connection 220/240V, 50Hz protection class IP54 Drive etc. ready for connection, motor control optional 6x adjustable machine feet for alignment Shaft edge: 40x35mm (adjustable) T-20 studs - 400mm pitch (customizable) 2-layer particularly transversely stable Our core competence lies in providing the customer with exactly what he really needs. Together with our customers, we develop customer-specific, individual solutions and supply appropriate systems. Fee ...
new
Aluminium angle conveyor belt incl. substructure horizontal range 2000mm (adjustable) Rising range 2200mm (customizable) Angle in the kink freely selectable: 30, 35, 40 or 45° Conveyor belt width 500mm (adjustable) We supply our conveyor belts in PVC, PU or rubber. PVC conveyor belt incl. carrier and shaft edge Drive: Motor 1.1KW ( adjustable ), speed 0.3m/sec Connection 220/240V, 50Hz protection class IP54 Drive etc. ready for connection, motor control optional 6x adjustable machine feet for alignment Shaft edge: 40x35mm (adjustable) T-20 studs - 400mm pitch (customizable) 2-layer particularly transversely stable Our core competence lies in providing the customer with exactly what he really needs. Together with our customers, we develop customer-specific, individual solutions and supply corresponding systems from our own production. Feel free to contact us by phone ...
used
Complete solution for the transport of bulk materials and demetalization of magnetic metal impurities. Aluminium riser conveyor belt incl. substructure Slope beginning area level ground (adjustable) Discharge height 1800mm (adjustable) Construction: height-adjustable Construction for suspension of the DMPM1200 overbelt magnetic separator included Conveyor belt width 500mm (adjustable) We supply our conveyor belts in PVC, PU or rubber. PVC conveyor belt incl. carrier and shaft edge Drive: Motor 0.25KW ( adjustable ), speed 0.3m/sec Connection 220/240V, 50Hz protection class IP54 Drive etc. ready for connection, motor control optional 6x adjustable machine feet for alignment Shaft edge: 40x35mm T-20 tunnels - 400mm pitch 2-layer particularly transversely stable Our core competence lies in providing the customer with exactly what he really needs. Together with our c ...
used
Complete solution for the transport of bulk materials and demetalization of magnetic metal impurities. Aluminium angle conveyor belt incl. substructure horizontal range 2000mm (adjustable) Rising range 4500mm (customizable) Angle in the kink freely selectable: 30, 35, 40 or 45° Construction: height-adjustable Construction for suspension of the DMPM1200 overbelt magnetic separator included Conveyor belt width 600mm (adjustable) We supply our conveyor belts in PVC, PU or rubber. PVC conveyor belt incl. carrier and shaft edge Drive: Motor 0.25KW ( adjustable ), speed 0.3m/sec Connection 220/240V, 50Hz protection class IP54 Drive etc. ready for connection, motor control optional 6x adjustable machine feet for alignment Shaft edge: 40x35mm T-20 tunnels - 400mm pitch 2-layer particularly transversely stable Our core competence lies in providing the customer with e ...
used
Gallus R200 B02 10-color – Age: 2007 Manufacturer: Gallus Ferd. Rüesch AG Configuration: 10 x Letterpress Units 2x unwinder, 2 DW left, 3 DW left, 3 DW right, 2 DW left, K250 Year of construction: 2007 (extension 10 colours) Rotastance 360° servo drive Rotastanze 360° servo-drive (middle 6's block) Rotor dryer servo-drive IS UV system M25-8x1-R-HP-SLC, UCS 6 Chill-roller technology 2 Web Edge Controls Softal corona system VS Tecknek web cleaning Sensotec register control system (LCD touch screen monitor) K250 winder automatic Tech. Specifications: Colour: Gallus NCS blue 7 red blanket printing units left 3 units red blanket printing unit right 1 screen printing unit left 1 screen printing unit right 1 hot stamping unit incl. temperature control unit All positions prepared for ...
new
Aluminium flat conveyor belt with substructure Abm: approx. 4000 x 300mm Aluminium construction Full-surface underlay sheet Drive: Gear motor 0.18KW GEMOTEG Connection 220/400V, 50Hz protection class IP54 drive, motor control optional 4 pcs machine feet for nivilation, height of the conveyor belt top edge 400mm PVC Tramsportband EM 10/2 0+12 PVC green hard ceiling Endlessly welded with stepped finger connection Fabric insert green Support side with 12 pcs. centrally welded PVC studS T40, pitch approx. 508mm Support side with 2 pieces, edge-flush welded shaft edges with fabric insert, green approx. 40mm high, approx. 35mm wide. Arrangement transverse +35-5+220-5+35mm
used
From overproduction 2 pieces available Abm;approx. 3000 x 500 x 105mm Aluminum construction: Conveyor belt width incl. shaft edge 500mm PVC conveyor belt with T-30 stud 400mm pitch Shaft edge flush on both sides: 40x35mm Conveyor belt green, 2-layer particularly transversely stable endless welded with step connection antistatic due to threads in the fabric of the running side Drive: Motor approx. 0.18Kw, speed 0.5m/sec. controllable with frequency converter Connection 220/400V, 50Hz protection class IP54 Drive, motor control optional
used
52″ x .187″ x 30,000Lbs Braner Slitting Line Make: Braner Material Width: 12″ – 54″ Material Thickness: .010″ – .187″ Weight Capacity: 30,000Lbs Coil ID: 20″ Coil OD: 72″ Entry 3-Arm Turnstile Entry L-Type Coil Car Mandrel Uncoiler with Hold – Down Roll Hydraulic Peeler Edge Guides Electric Edge Control Three (3) Slitting Heads with 7″ Arbor Diameter Adjustable Arbors DC Motor Drive Two (2) Scrap Winder Pit Cross Over Table Combo Type Tension Stand with Water Cooled Brake Recoiler with Over-Arm Separator 125HP Recoiler Motor CMC Solid State Drive 4-Arm Exit Turnstile
used
Description: -> Built in 2007 -> medium format up to 75 x 105 cm -> with protective enclosure / security fence This transomat was used for unloading a high-speed cutter - standing on the right. The Polar Transomat uses split and undivided layers automatically onto pallets, while at the same time is cut further. As a result, production costs, depending on the cutting program, by 25 -70%. Thanks to the patented, movable pallet tip, the Polar Transomat has a particularly high edge accuracy. Increased productivity: stacking at the same time as cutting Improvement of quality: Particularly edge-accurate stacks can be created directly and faster Process.
used
Mezzanine SECOND-HAND GOODS Data: L : approx. 43.5 m B : approx. 12 m Lower edge of the stage : approx. 2.5 m Top edge stage : approx. 2.9 m Total area : approx. 522 sqm Load : 500 kg / sqm Lining : 38 mm clamping plate Support grid : approx. 4.3 x 2.8m incl. 2x stairs incl. approx. 44lfm railing incl. 2x transfer lock Used goods ex stock Wietmarschen ALL DIMENSIONS AND HEIGHTS UK STAGE / OK STAGE CAN BE ADAPTED TO CUSTOMER REQUEST IF REQUIRED! OUR PLANNING DEPARTMENT WILL BE HAPPY TO PROVIDE YOU WITH A NON-BINDING OFFER TAILORED TO YOUR NEEDS. --- Price: 52.200 € net 62.118 € gross You will receive an invoice with VAT shown.
used
Mezzanine SECOND-HAND GOODS Data: L : approx. 36 m B : approx. 12 m Lower edge of the stage : approx. 2.8 m Top edge of the stage : approx. 3.1 m Total area : approx. 432 sqm Load : 500 kg / sqm Lining : 38 mm clamping plate Support grid : approx. 4.3 x 2.8m incl. 2x stairs incl. approx. 36lfm railing incl. 2x transfer lock Used goods ex stock Wietmarschen ALL DIMENSIONS AND HEIGHTS UK STAGE / OK STAGE CAN BE ADAPTED TO CUSTOMER REQUEST IF REQUIRED! OUR PLANNING DEPARTMENT WILL BE HAPPY TO PROVIDE YOU WITH A NON-BINDING OFFER TAILORED TO YOUR NEEDS. --- Price: 43.200 € net 51.408 € gross You will receive an invoice with VAT shown.
used
COMPOSED OF: 1 x Rotor Remanufactured + balanced+ equipped 2 x Rotor (need to be refurbished) 1 x Clamping device for balancing 9 x Impact strips (Large) 6 x Impact bar (small) 2 x Enema cone 3 x tear-off edge various rotor protection plates CONSISTING OF: 1 x Rotor newly reconditioned + balanced+ fitted 2 x Rotor (must be reconditioned) 1 x Clamping device for balancing 9 x Blow bars (large) 6 x Blow bars (small) 2 x Inlet cone 3 x Tear-off edge Various rotor protection plates
used
Balkenzwinge 20 – galvanized Used - ready for immediate use! Galvanized beam clamps for support in beams and edge and ceiling formwork Length: 30 cm Height: 35 cm 6.9 kg Price: € 32,00 356 pieces in stock forming support 20 – galvanized Used - ready for immediate use! Galvanized beam clamps for supporting beams and edge and slab stop ends Length: 30cm Heigth: 35cm 6.9 kg Price € 32,00 356 pieces on stock
used
Ochsner Edge Gilding Machine, For Semi-Automatic Edge Gilding of a Veriety of Books, Hand Feeding Area for End Boards and Book Blocks, 4 Sanding Stations, 1st Cross Sanding Station with 100 Grade Sanding Belt, 2nd Linear Sanding Station with 180 Grade Sanding Belt, 3rd Linear Sanding Station with 240 Grade Sanding Belt, 4th Linear Sanding Station with 320 Grade Sanding Belt, Brushing Station, Dust Bag Extraction Unit, Pre-Heating of Book Blocks, Gild Foil Application with 2 Rollers, Electrical and Mechanical Guarding, Main Control Panel with Timer For Pre-Heating, Foil Cutter, Return Conveyor, Format: Book Size: Max. Any Standard Book Sizee Plus Larger Formats, Min. 68x102mm, Production: at Block Thickness of 75mm ca. 50 Blocks/Hour, Pocket Diary Size: 25 Blocks/Hour Desk Diary Size
used
Enko ES 1800 ST Year: 2009 TECHNICAL SPECIFICATION Suitable for the following Materials Solid board : up to 300 g/m² Corrugated and laminated corrugated : 0.5 - 12 mm Cabability specifications: Sheet size : max. 1800 x 1300 mm Min. 800 x 700 mm Cutting pressure : max. (450 t) 4.5 Maximum number of strokes :max. 3000 s/h Dimensions and Weights : Length of machine : approx. 6300 mm Width of machine : approx. 3200 mm Height of machine : approx. 2150 mm Weight of machine : aprox. 24 t Pile height Feeder : max 1200 mm Delivery : max. 1160 mm Technical Data Gripper edge margin, adjustable from : 10 - 18 mm Cutting knife height: 23.8 mm Wood front edge: 27 mm Electrical connected load: 48 KW Electrical supply: 3 Ph 400 V 50 Hz Compressed air required: 6 bar (kg/m²)
used
Octagon Loop Slitting Line 60″ x .250″ x 60,000Lb Thickness Range: .015″ – .250″ Line Speed: 1000 FPM Entry Coil ID: 20″ – 24″ Exit Coil ID: 20″ Coil OD: 72″ Weight Capacity: 60,000Lb Shear Strength: 60,000 PSI Material: Steel, Aluminum, stainless Line Direction: Left to Right Complete Line With: Entry L-Type Coil Car Floor Standing / Self Contained Hydraulics Mandrel Uncoiler 4 Leaf Hydraulic Expansion Hydraulic Sliding Base Water Cooled Brake and Cooler Feed-Up Drive Air Clutch Powered Hold Down Roll North American Edge Control Peeler Table Pinch Rolls 2 Sets of Edge Guides Crop Shear 2 Injector Style Slitter Heads 8″ Diameter Arbors Sliding Outboard Support Hydraulic Slitter Head Clamping Hydraulic Arbor Adjustment 150 HP DC Slitter Drive Shim-less Tooling 2 Scrap Winders Oscillating Wind Hydraulic Eject Looping Pit C ...
used
ZAKMET HYPERZAKMET 6000X2500 plasma cutting machine was built in 2008 in Poland. The machine is used to cut pre-programmed shapes in details having a maximum thickness of 38 mm (carbon steel) or 20 mm (aluminium and stainless steel). A powerful HYPERTHERM HyPerformance HPR 130 laser source with a power of 130 A is used for the cutting process, allowing extremely precise and accurate machining to be achieved. The plasma cutting machine has a solidly built work table with a length of 6000 mm and a width of 2500 mm, which can be extended by means of an additional control panel. The plasma cutting machine is also equipped with FASTCAM CAD/CAM software for simple and effective programming of the cut shapes, and a modern HYPERTHERM EDGE CNC controller, which allows for full control of the machine. Characteristics of the ZAKMET HYPERZAKMET 6000X2500 plasma cutting machine - working area ...
used
Description Angle 180 Bandwidth 400mm Width of the curve outside (distance from edge to edge) 187cm
used
workpiece return Brand: Ligmatech Type: ZHR 15/XX/LI The workpiece return enables one-man operation on edge banding machines. Workpieces coming out of the machine are roller conveyor, which transports the parts to a lifting station promotes. Via a scissor mechanism the parts are Upper pressure promoted this to an inclined plane, consisting of roller rails, transports. On this inclined roller conveyor, the parts slide by their own weight to the Operator back. The driven roller conveyor is equipped with a turning station the parts coming out of the machine crosswise rotated by 90 degrees and thus conveyed back longitudinally can. To support long transverse arriving parts an additional support roller track is attached, which can be folded down when not in use. Similarly, when not in use, the inclined roller The return path can be folded vertically upwards, so t ...
used
Corona Pull Roll Station 1 Primer Coater & Dryer 3 Extruders (with QSE Adapter, extrusion Do, Die, Gravimetrics 3+1) Auxiliary Unwind with splicing unit shafted desi! Laminator Edge Trim Razor Blade Beta Thickness Gauge PROTAGON Corona with Nip Station 3 Edge Trim Shear Cut Centre Slit&Spreader Ro Automatic Splicer Two direction Rewind Shafted Design Typlcal substrates: Paper:20 - 150 g/m2 Aluminium :6,35 - 25 μm PE:40 -120 μm BOPA: 15-50 μm BOPET: 9 -50 μm (smooth and metallised) BOPP: 15- 50 μm (smooth and metallised) Nonwoven PP: optional The extruder or extruders of the extrusion sta· motorized carriage. This carriage with a 3-\i UP/DOWN,LEFT/RIGHT and IN/OUT travel. The extruder carriage consists of: guide frame 4 wheels. Height adjustment traveldrive Side adjustment Control cabinets EXTRUDER A Screw diameter: 114.3mm (4.5 inches) Screw ...
new
working width: 950 mm workpiece width - max.: 1,0 - 50 mm sandingbelt width: 970 mm sandingbelt length: 1900 mm weight of the machine ca.: 1,8 t The SMD 123 RE is a universal entry-level machine for all-round deburring Uniform edge rounding and surface grinding of sheet metal dry process. Suitable for processing steel, stainless steel and aluminium. The non-slip conveyor belt enables safe transport and the Machining even of small workpieces. The two rotor heads ensure an all-round uniform Edge rounding and a directionless finish. The intuitive operation via touch panel allows every employee get to grips with the machine quickly. The SMD 1 models are installed and ready for operation in a short time. The compact design saves valuable production space. Low acquisition and operating costs lead to short amortization periods and guarantee economical processing of your workpieces. consi ...
new
plate width: 2000 mm plate depth: 1000 mm plate height: 310 mm weight: 1650 kg dimensions of the machine ca.: 2000 x 1000 x 300 mm Clamping plates - T-slot plates - panel array 2000 x 1000 x 310 mm If you have not found the size you require, you can also send us an e-mail send us an e-mail with the completed PDF form. With this we can can produce an individually manufactured panel for you. Number of grooves: 3 edge distance: 185mm groove spacing: 270mm Groove width: 28mm Casting quality HT250 Flatness less than 0,12 mm Surface machined according to DIN 876 Edge distance: 185mm Groove spacing: 270mm Groove width: 28mm Casting quality HT250 Flatness less than 0,12 mm Surface machined according to DIN 876/III The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
new
New machine 24 months warranty Advantages: + tested by our master baker and confectioner with various doughs + very solidly built, power transmission with belt drive + no high voltage current necessary - operation with 230V possible! + with 4 feet and permanently installed boiler + mobile machine, on swivel wheels with parking brake + short kneading times with excellent results + with reverse gear, for mixing the ingredients before the kneading process + 10 kneading speeds, for particularly gentle to intensive kneading + 2 timers, with automatic switchover & switch-off + ideal for smallest batches + Stainless steel boiler, central rod and spiral + transparent flour dust cap with automatic switch-off + fast spare parts supply within 1-2 working days Specifications: - Flour capacity: 1 - 8 kg - Dough capacity: 1.5 - 12 kg - Boiler volume: approx. 20 litres - Motor p ...
used
Shape milling machine Brandt type FP 10 Specifications: • Year of construction: 1989 • Workpiece thickness max. (mm): 55 • Workpiece width min. (mm): 80 • Profile depth max. (mm): 80 • Inner radius min. (mm): 10 • Edge material thickness max. (mm): 3 - depending on radius and edge material • Milling motor: 0.5 kW, 27,000 rpm. • Electrical: 220 V - 1 Ph. - 50 Hz • Power supply (kW): 0.5 • Compressed air connection (bar): 6 • Dimensions L x W x H (mm): 850 x 650 x 1430 • Working table height (mm): 1000 • Swabing unit: for processing thick PVC edges • Weight (kg): approx. 120
used
ZENITH 844 paving plant with face mix device and packacking line. Control Siemens PLC Simatic S5. Including 5 moulds. 4 paving/interlock moulds and 1 lawn edge kerbstone mould 1 Parolin/Wave mould 6 cm, 1 Unidekor mould 6 cm, 2 Rectangular moulds 8 cm, 1 lawn edge kerbstone mould. See Mould list in photos. 300 steel production boards Plant is in very good, well-maintained condition.
used
Laser cutting machine Make: Trumpf Type: TruLaser 1030 Year of construction: 2010 Machine: -Working area: 3000 x 1500 mm -Closed machine frame with integrated laser unit, Control cabinet and excitation -Sheet metal support accessible on both sides -Motion unit with flying optics for accurate machining -Drives with maintenance-free three-phase servo motors -Ride-on suction -Closed beam guidance -Fully integrated refrigeration unit -Collection container under the work area -Position laser diode -FocusLine: High-pressure nitrogen cutting edge in stainless steel and aluminium -Transport and assembly device Trumpf Laser: -Diffusion-cooled CO2 laser TruCoax 2000 -High frequency excitation with transistor generator -Laser power control -Logbook function laser -Premix gas cylinder with laser gas Cutting head: -Lens cutting head with 7.5" focal length and c ...
used
Slitting line Pro-Eco 72″ x .250″ x 74,000Lb (A3774) Slitting line Pro-Eco 72″ x .250″ x 74,000Lb (A3774) is perfect solution for longitudinal cutting of coil metal into strips. This line can work with very big coils up to 74,000 Lb weight and 0.25 inches maximum metal thickness. Line is strong enough to make cutting speed 200 – 600 fpm depends on metal thickness and width you work with Slitting line Pro-Eco 72″ x .250″ x 74,000Lb (A3774) Manufacturer: PRO ECO Material: CRS, HRS, HPP & O Material Width: 12″ – 72″ Material Thickness: .060″ – .250″ Coil Weight: 74,000Lb Coil ID: 20″ – 30″ / 20″ – 24″ Coil OD: 72″ Line Speed: 200 – 600 fpm Direction: L-R Three (3) Coil Storage Ramp Coil Car Powered Lift & Traverse Double Cone Uncoiler Sliding Base Dual Water Cooled Brake Feed-Up Motor Powered ...
used
Electric pneumatic edge press Haug HFK 2200 for pressing edge material on wood with heating. Incl. 3 table extensions Swivel worktable, Working size max. approx.: 1,400 x 2,500mm, heater: 1,7 kW
new
Spindle speed: 4460minâ»Â¹; Min. workpiece dimension X: 300mm; Min. workpiece dimension Y: 90mm; Min. workpiece dimension Z: 10mm; Max. travel speed X-axis: 20m/min; Tool diameter max.: 35mm; Max. workpiece dimension X: 3000mm; Max. workpiece dimension Y: 900mm; Max. workpiece dimension Z: 50mm; Groove saw speed: 5700minâ»Â¹; Dimensions: 3704mm x 1455mm x 2209mm (L x W x H); Nominal diameter of exhaust nozzle outside: 120mm; Power drive motor: 2.2kW; Weight: 1200kg; One drill head with seven vertical spindles, four horizontal spindles and one groove saw unit For drilling on the top of the plate and on all four sides of the workpiece, as well as groove milling in the X-direction grooves in the phenolic resin work table also allow through holes The workpiece movements on the X, Y and Z axes are carried out on linear prism guides Compact external dimensions Including ...
new
Working width: 4500 mm Working height: 3000 mm Number of cylinders: 6 St. Dimensions (L/W/H): 5600x1350x3550 mm Weight: 3000 kg S&S frame press Bavaria 2000 L --------------------------------- With automatic pressing cycle + manual control for corner connections tenon + slots and dowel connection / mortised tenon, can be changed using a selector switch on the control cabinet. With basic equipment for the optional use of counter profiles if the sash is on loose part to be folded over. CE version Basic machine in the strongest welded frame, with thick-walled special hollow profiles. Guideways of the pressure bars for the press corners in a low-abrasion finish. Fast, smooth, manual width adjustment by ball-bearing carriage, fixation in 50 mm Hole grid, optional motorized width adjustment with with hydraulic clamping (surcharge). Height adjustment and pressing by long-stroke cylinder in one ...
new
Laser cutting machine model Penta BOLT 3015 12000W, Equipped as follows: Working area 3000mmx1500mm Load capacity: 1413Kg Speed 160m/min max. acceleration 2.2 G Statistical accuracy ±0.03mm Repeatability ±0.01mm Cutting capacity mild steel 35-40mm Stainless steel 35-40mm Nominal voltage 380V Frequency: 50Hz Total Power Protection Class IP54 Laser source 12000W Raycus Autofocus cutting head Precitec Proportional valve Machine socket X/Y Rack & Pinion Linear guide Gear box Z32 CNC with Smart Manager Software 4x servo motor & driver CAD/CAM software Cutting edge database Plate exchanger Radiator Dross collector Stabilizer Air compressor and dryer 27'' full-touch control screen Fully enclosed structure with laser safety glass protection Automatic pallet swapping Section Dust Removal & Trolly Intelligent anti-collision function Camera Surveillance System ...
used
Overview The disposable PET-ACF line was manufactured by KHS in 2006. Most parts of the line are from KHS. Blow moulder is from Sidel and process department from GEA. The line is for sale, as the complete factory is closed Technical specifications: PET bottle formats 330 ml 500ml Suitable for juices and soft drinks with or without CO² Capacity Non-carbonated drinks: 30.000 bph (330ml 500ml) Carbonated drinks: 24.000 bph (500ml) Control: Siemens S7 Year of manufacture: 2006 The line in detail: Manufacturer: Sidel Machine type: Blow moulder Model: SBO 16 Year of manufacture: 2006 Manufacturer: KHS Machine type: Cap steriliser Model: SCS 8 Flatcap 28mm Year of manufacture: 2006 Manufacturer: KHS Machine type: Cap steriliser Model: SCT 4 Flat 38 mm Year of manufacture: 2006 Manufacturer: KHS Machine type: Filler Model: asmofill ACF 30-70-100-15 incl. supply units for peroxide ...
used
Clamping device, three-part, with adjustment aids PAGUS diameter workpiece: min. approx. Ø 200 mm - max. approx. Ø 500 mm 2x clamping device height lower jaws over Lower edge of mounting foot: 385 mm Mounting foot: 650 x 120 x 15 mm Dimensions: 780 x 290 x 930 mm 1x counter holder height above lower edge Mounting foot: 440 - 625 mm, infinitely adjustable Mounting foot: 650 x 160 x 15 mm Dimensions: 650 x 160 x 460 mm 4x adjustment aids diameter: 2x Ø 214 mm, 1x Ø 276 mm, 1x Ø 744 mm height: 60 mm center bore: Ø 100 mm used, tested ! Dimensions ( transport, with pallet ): 800 x 600 x 1100 mm Weight ( net ): 192 kg
used
tilting table, clamping table, milling table PAGUS clamping surface: 207 x 145 mm material thickness: 13 mm approx. -10° to +190° tiltable working height: 57 mm above upper edge base plate (tilt angle 0°) ) pivot point: 57 mm above upper edge base plate base plate: 297 x 200 mm material thickness: 14 mm used, tested ! Dimensions: 297 x 200 x 95 mm
used
tilting table, clamping table, milling table PAGUS clamping surface: 205 x 145 mm material thickness: 14 mm approx. -10° to +190° tiltable Working height: 60 mm above upper edge base plate (tilt angle 0°) ) pivot point: 57 mm above upper edge base plate base plate: 300 x 200 mm material thickness: 20 mm used, tested ! Dimensions: 300 x 200 x 95 mm
used
Tension spring, barrel-shaped, 10 pieces PAGUS Ø 68 x 295 mm Wire diameter: 8 mm Coiling diameter ( outer ): Ø 68 mm Length of the unloaded spring ( inner edge of the eyelet to the inner edge of the eyelet): 278 mm Length of the unloaded spring body: 153 mm Eyelet position: 180° Material: spring steel, surface treated New ! Dimensions ( single tension spring ): 295 x 68 x 68 mm