We use cookies to optimize our website for you and to be able to continuously improve it. By continuing to browse the site you are agreeing to our use of cookies.
Disagree
120,695 used machines on RESALE, but how to find them? Machine Search
maximum number of results exceeded > 1000
please refine your search
used
This lot has been tested for function
new
Band width: 150mm; Band length: 2400mm; Veneer grinding device: no; Oscillation: yes; Roll diameter: mm; Swivel grinding unit: yes / 90Â - 0Â; Work table: 730 x 300 mm; Additional table: 420 x 400 mm; Belt speed : 14 m/sec. m/sec.; Suction connection: 120mm; Motor power: 1.8 kW / 400V; Machine length: 1480 mm; Machine width: 680 mm; Weight: 160 kg;
used
max. working width: 1000 mm workable material thickness: 20 mm Tension: 400 V / 50 Hz Total power: 28,5 A Total current consumption: 12,6 kW Insulation class: IP54 Infinitely variable feed speed: 0-4 m / min Length: 2230 mm Width: 1500 mm Height: 1532 mm Machine weight: 1700 kg
used
max. working width: 1000 mm workable material thickness: 20 mm Tension: 400 V / 50 Hz Total power: 28,5 A Total current consumption: 12,6 kW Insulation class: IP54 Infinitely variable feed speed: 0-4 m / min Length: 2230 mm Width: 1500 mm Height: 1532 mm Machine weight: 1700 kg
used
max. working width: 1500 mm workable material thickness: 20 mm Tension: 400 V / 50 Hz Total power: 28,5 A Total current consumption: 12,6 kW Insulation class: IP54 Infinitely variable feed speed: 0-4 m / min Length: 2730 mm Width: 1500 mm Height: 1532 mm Machine weight: 2200 kg
used
max. working width: 1000 mm workable material thickness: 0,5 - 120 mm Working hours machine: h Total power: 98 A Total current consumption: 45 kW Insulation class: IP 42 Infinitely variable feed speed: 0-4 m / min Adjustment of material thickness: elektrisch Adjustment of tools: elektrisch Length: 3100 mm Width: 2100 mm Height: 2000 mm Machine weight: 3790 kg
new
technical details: - motor band oscillation - pneumatic belt tension - small support table on the pulley - Swivel range grinding track rear wall: 90° - 180° - Dimensions grinding track back wall:850 x 150 mm - Grinding track back wall glued with a graphite sliding lining - Band size: 150 x 2,280 mm - Steel table adjustable in height by spring pressure - Table size: 750 x 350 mm - Belt speed: 22 m/sec - Roll diameter: 140 /80 mm - Diameter suction nozzle: 100 mm - Bracket (included) - Miter stop (included) - Switch-plug combination - Motor protection and main switch according to VDE - Dust tested (GS) Holz-BG-Stuttgart (when connected to an extraction system with an air velocity of at least 20 m/sec) - Weight: 200 kg Sound power level (DIN EN ISO 7346) - No-load: 91 dB(A) - Processing: 91 dB(A) Workplace-related emission value (DIN EN ISO 11202) - No-load: 83 ...
used
With feeder and destacker Wemhöner 184.
used
Interchangeable heads used, good condition 16 pcs. Interchangeable heads FK 11/13 devices, exchangeable at the top below. 1 Quickmelt incl. evaluation device level.
used
1 Quickmelt incl. evaluation device level. Interchangeable heads used, good condition 16 pcs. Interchangeable heads FK 11/13 devices, exchangeable at the top below.
used
Workpiece thickness: max. 45mm, workpiece length: min. 180mm, workpiece width: min. 60mm, pressure force of a roller: approx. 400N, feed speed: 16m/min max. With documentation, an on-site inspection is possible.
used
Max. glass dimensions: 2000x3000mm, number of spindles: 8, glass thickness: 3-28mm, length: 6500mm, width: 1600mm, height: 2600mm, weight: 3.2t.
new
TABLE mm 2600 x 530 ROLLS min. ÷ max. mm 0.4 ÷ 3 STRIP FABRIC MAX MM 5 max. workpiece height min. ÷ max. mm 12 ÷ 50 min length or width processable plate mm 190/65 Speed m/min 7
used
SCM Selecta 12F edgebander Glue station for granules pressure zone Pre-cutting guillotine Precision cutting unit Milling unit with straight milling cutters Milling unit with profile milling cutters Flat cyclin Polishers CE Certificate 1620kg
used
Little used, like new!
well-kept HolzHer 1422 K Banding thickness up to 20mm Gluing, capping, flush or radius milling Total length approx. 3450mm
used
Clever HIT S-20 installation kit complete for stationary machine with joint milling (This is a Vorfür unit) Net worth: 11 KW Air heater max. temp.: 650°C at 20 m/min feed List price: € 12.890 our price: € 5.950 Installation/retrofit: € 2.950
used
Double-sided grinder Prosand for boxes Two grinding units Oscillated aggregates Grinding height 270mm Pneumatic access to the material Electrical setting of ground material Motor power: 2×5.5kw
used
Motorised height-adjustment Sound enclosure over all trimming motors Equipment: Coil and strip magazine Hot melt unit Pressure zone End trims, chamfer and straight, automatic adjustment Top/bottom rough trimming Top/bottom fine trimming, tilting, Contour trimming unit Scraping unit Buffing unit return conveyor Ligmatech ZHR 05
used
Gear milling machine Micron 106 16 A 380 V
new
Length: 70 mm, leg length: 45 x 45 mm, for belt width 19 mm Stock: 14,000 pieces also available in partial quantities Price € 62,00 per 1000 pieces
new
Length: 45 mm, leg length: 25 x 25 mm, for belt width 19 mm Current stock: 66,000 pieces Also available in partial quantities! Price € 26,00 per 1000 pieces
used
Edges and facets grinding machine. Grinding angle: 45 degrees. Support table area: 100 x 320 mm Power supply: 380 Vol, 16 Amp. Incl. substructure with dust extraction, the extraction hose is unfortunately missing., 2 pieces of new compartments - sanding pad, diameter: 165 mm. Working height: approx. 105 cm. Weight: approx. 80 kg. Good operational condition. The machine can be inspected and demonstrated under power by arrangement and is immediately available.
used
available from the end of 2023, more dates to follow
used
Hydropneumatic mode of operation Max. punching height: 90 mm Resister stroke: 100 mm Punching stroke: 20 mm Pressing force: 30 kN Max. profile height: 100 mm Weight: approx. 280 kg
used
Oscillation: ja ja / nein : ja ja/nein : ja ja/nein tiltable up to: Grad Motor output: 3,0 kW Table dimensions: mm sanding width: 200 mm Weight: 290 kg The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
used
Press height 140 mm Pressing force 70 kN (7 t) Hydropneumatic actuator Compressed air connection 7 bar Air consumption per stroke 35 l Length 1,100 mm, depth 950 mm, height 1,230 mm Weight 550 kg
used
Technical details: - Premilling Unit - Corner Rounding Unit - Max feed speed: 30 m/min - Max panel thickness: 60 mm - Operating Units: 8
used
Technical details: - Premilling Unit - Corner Rounding Unit - Maximum panel thickness: 65 mm - Operating Units: 9
used
Equipment/technical data: - Support plate for rolls - Gluing part with glue basin and pressure zone - Impact scissors - Cross-cut saw unit - Flush and radius milling unit - Pulling blade unit - Polishing unit with spraying unit - Hair dryer unit - Machine operation via touch screen - Workpiece width min. 60 mm - Workpiece length min. 140 mm - Workpiece thickness 10 - 55 mm - Roll material from 0.4 - 3 mm thickness - Strip material up to 8 mm thick - manual upper pressure adjustment by hand crank - Dimensions: 4,163 x 750 x 1,480 mm - Suction connection Ø 2 x 120 mm - electr. Connection: 400V; 50Hz; 12kW; 40.5A Technical data subject to actual equipment
used
MACHINE IS EXCELLENT CONDITION DAILY WORKING IN THE PRODUCTION , MACHINE WILL BE REPLACED WITH BIGGER NEW MACHINE MACHINE IS AWAILIBLE IMEDIATELY. TECHNICAL DATA IS PRESENT ON PHOTOS WE SHIP MACHINE WORLD WIDE FOR THE CUSTOMERS
used
SPECIFICATIONS: 2 oscillating grinding units at the top - bottom Inclination 0° - 45° Adjustment option Lateral support for wide workpieces 80 mm guideway Max. working height mm: 100 Upper pushers with adjustable rubberized wheels
used
Pneumatic mode of operation Various knives and instruction manual available Compressed air connection 6-8 bar Weight approx. 250 kg
new
4 roll plate bending machine 3100 x 28 mm brand new year 2023 ready. MG model M3028 Capacity plate 3000 mm bending thickness 28 mm prebend 22 mm dual pre-pinch technical data: -length of rolls 3100 mm -top roll dia. 380mm -lower roll dia. 360mm - Power electric 20Hp weight 17ton Configuration fully hydraulic -Hardened surface of the 4 rolls , smooth finishing suitable for stainless steel plates rolling -Digital position readout with memory set -Conical bending plates , contrast pad hardened , rollers angle tiltable -Driven rolls hydraulic plate dragging with axial gear unit each powered rolls. -Opening front hydraulic to unload closed shells. -Rerolling system for welded plates calibration precise rounding. -Control console electric commands with digital readout -Safety installation and emergency stop according to regulation
new
Band width: 150mm; Band length: 2280mm; Table size: 750mm x 350mm; Additional table: 350mm x 300mm; Veneer grinding device: no; Oscillation: yes; Swivel grinding unit: yes; Suction connection: 120mm; Motor power: 2.2 kW; Machine length: 1000mm; Machine width: 800mm; Weight: 200kg;
used
Band width: 150mm; Veneer grinding device: yes; Oscillation: yes; Abrasive rollers for curves: 1; Swivel table: yes; Table size: Suction connection: 120mm; Motor power: 1.8kW; Machine length: 1700mm; Machine width: 900mm; Weight: 450kg;
used
Manufacturer: Homag , Type: KAL 310/8/A20/S2, Year: 2005, Control: PC 22, Work piece width min-max mm: min 55/100, Min.-max. workpiece height in mm: 12 - 60, Min-max feed m/min: 18 - 24, Einlauflineal gesteuert: yes, Premilling: 2 x 3kW, Application of separation agent: yes, Coil magazine: 2, Mitre stations: Fase / Gerade, Pre-milling: 2 x 1,5 kW, Bevel milling: FK 13 - 8Fach, radius milling: 4 kW, Corner tracing type: MN 21, Flat scraper: FA 11, Bonding part EVA: A 20, Top pressure belt/roller: Band, Work piece refeeding: vorinstalliert, FREE TEXT: Frreiplatz, Year :2005
used
Manufacturer: BA, Type: 143, Year: 1992, Min.-max. workpiece length in mm: 250, Min.-max. workpiece height in mm: 60, Edgeband thickness max mm: 3, Panel length min mm: 250, Feeding speed max m/min: hand, Milling units: 2, rotations controlled: 18000, kW-Leistung Motor: 0,5, Trimming saw: yes, Flush/radius/chamfer milling: yes, Machine lenght mm: 1000, Maschine vorführbereit: yes, Year :1992
used
Manufacturer: Brandt, Type: Eckenkopierautomat, Year: ca.1995, Control: hand, Monting of the machine: 1 Fräsmotor mit<CRLF>tastung, Year :ca.1995
used
Manufacturer: Brandt, Type: Optimat KD 77 C, Year: 1998, Program: Brandt, Work piece width min-max mm: 65, Min.-max. workpiece length in mm: 160, Min.-max. workpiece height in mm: 10, Edgeband height max mm: 60, Thickness of coiled edgeband max mm: 3, Vorschub min- max m/min: 11 , Premilling: no, Premilling: no, Mitre stations: yes, Glue system granulate/cartridge: Granulat, Mitre stations: yes, Radiusfräsen : yes, Schnellwechselmotore: yes, Flush/radius/chamfer milling: yes, Contour milling type: yes, Radius scraper: yes, Buffing unit: yes, Top pressure belt/roller: Rolle, Work piece refeeding: yes, Compressed air bar: 6, Noise enclosure: yes, Year :1998
used
Manufacturer: IMA Steckprofileindrückmaschine, Type: Nowimat/I/G80/500, Year: 2001, Control: Ima, Work piece width min-max mm: ca.60, Min.-max. workpiece length in mm: 2500, Min.-max. workpiece height in mm: 10-45, Min-max feed m/min: ca.20, automatischer Einzug: yes, Premilling: 4 X 2,2 kw, Coil magazine: 2 Stück Stegprofil, Mitre stations: yes, radius milling: Eindrückstation Profil, Work piece refeeding: yes, Hover cussion table: yes, Hover cussion table: yes, Year :2001
used
Manufacturer: Brandt, Type: Optimat F 13, Work piece width min-max mm: 50, Edgeband thickness max mm: 0,5-3, Edgeband height max mm: 55, Milling units: 2, rotations controlled: 18000, kW-Leistung Motor: 2 x 0,5, Work piece width min-max mm: 50,
used
Manufacturer: Delle Vedove Vakumat Kanten-hydrophobierung (Wachsauftrag) Clicksystem, Type: BL 030-00, Year: 2002, Control: Delle Devove Siemens, Auftragsmaterial: Wachs, Vakuumauftragseinheit Menge: 2, Schnellwechselsytem: yes, Vakuumturbine: 1, Halter für Auftragseinheiten: 2, Heizung für Material: yes, Year :2002
used
Manufacturer: IMA, Type: Novimat K/I/G80/1005/SR3 L12, Year: 2000, Program: IMA, Control: IMATRONIC 100, Work piece width min-max mm: 140 - 600, Min.-max. workpiece height in mm: 16 - 32, Min-max feed m/min: 5 - 25, Infeed table: yes, Einlauflineal gesteuert: yes, Premilling: yes, Application of separation agent: yes, Coil magazine: 12 fach, Mitre stations: yes, Pre-milling: yes, Bevel milling: yes, radius milling: yes, Radius scraper: yes, Corner trace buffing: yes, Corner trace buffing: yes, Barcode: yes, Freiplätze: 1, Machine lenght mm: 12300, Noise enclosure: yes, Rückführung Typ: yes, Year :2000
used
Manufacturer: Homag, Type: KL 10/18/QA, Year: 2000, Program: Homatic, Control: NC 21, Min.-max. workpiece height in mm: 85 - 1200, Edgeband height max mm: 240, Min-max feed m/min: 8 - 60, Axis control: 0,3 - 3,0 , Einlauflineal gesteuert: 10 - 40, Application of separation agent: 0,4 - 12, Power per lamp: yes, Strip magazin: yes, Min.-max. batten magazine mm: yes, Mitre stations: yes, Pre-milling: Granulat, Strip magazin: yes, Magazin : yes, Grooves, slewable-controlled: FK 13, Nuten : UF 11, Radius scraper: yes, Type of scraper: 8, Scraper with axis adjustment: yes, Flat scraper: 2, Type of scraper 2: yes, Corner trace buffing: 2 X Fase, 4 motors: yes, Corner trace buffing: yes, Servo-Kopieren: yes, Rollende-Kette: Band, Ersatzverleimteil : Riemen, Bonding part EVA: 6, Nozzle: 11.000, Pre-smelting Kg/Hr: yes, Year :2000
used
Manufacturer: Brandt, Type: KE 22 F, Year: 1991, Edgeband thickness max mm: 20, Edgeband height max mm: 55, Thickness of coiled edgeband max mm: 3, Panel length min mm: 250, Work piece thickness min mm: 150, Coil magazine: yes, Feeding speed max m/min: 7-25, Machine lenght mm: 10000, Compressed air bar: 6, Premilling: yes, Strip magazin: yes, Trimming saw: yes, Flush/radius/chamfer milling: yes, Contour milling: no, Ziehklinge Radius: yes, Flat scraper: yes, Buffing unit: yes, Glue system granulate/cartridge: Granulat, Top pressure belt/roller: Rolle, KS 10 Bandschleifaggregat für Funier oder Massiv, Year :1991
used
Manufacturer: MB Maschinenbau, Type: ROBA-Simplex, Year: 2010, Control: yes, Monting of the machine: Schleiflamelle, Control: yes, Sanding belt hight: 100 mm, Table length: 1800 mm, Slewable sanding head: no, Sanding belt width max mm: 100, Work piece hight min-max mm: 80, Schleifbandgeschwindigkeit min-max m/sec: Frequenz, Bandantriebsmotor kW: ca.4, Oszillation mm: yes, Hight adjustment by hand wheel: yes, FREE TEXT: Luftpolsterkissentisch, Year :2010
used
Manufacturer: KBM Kantenschleifmaschine, Type: KBM 3200, Year: 2013, Control: hand, Control: hand, Roller diameter D mm: ca.120, Table stop mm: ca.900, Sanding area (beam): yes, Sanding belt width max mm: 150, Sanding belt length max mm: ca.3200, Sanding unit slewable up to 45°: yes, Schleifbandgeschwindigkeit min-max m/sec: 2 Stufig, Sanding belt dimensions mm: ca 3200 X 150, Bandantriebsmotor kW: 2,2, Oszillation mm: ca.20, Year :2013
used
Manufacturer: Brandt , Type: F 10/100, Year: ca.2000, Control: hand, Edgeband thickness max mm: 3, Edgeband height max mm: 10-55, Feeding speed max m/min: hand, Milling units: 2, rotations controlled: 18000, kW output motor: 0,5, Inner radius in mm: 35, Suitable for shaped and straight parts: yes, Manual feed: yes, Mitre stations: yes, Year :ca.2000
used
Manufacturer: Hebrock, Type: AKV 88 F, Year: 1997, Control: hand, Glue application: no, Edgeband thickness max mm: 3,0, Edgeband height max mm: 50, Edgeband thickness max mm: 3,0, Glue system granulate/cartridge: Wärmedusche, Feeding speed min-max m/min: 0-7, Mitre stations: yes, FREE TEXT: Elektronische Eintellung der Kantenlänge, Year :1997