used Eccentric Presses for sale

Used Mechanical Press MOSSINI 200 ton equipped with electronic feeder and decoiler dimension table 1400 x 750 mm dimension slide 900 x 650 mm stroke min/max 4-180 mm stroke par minute 20-50 spm electroni Feeder 400 x 2 mm model RNM - CE Marked

pressure: 060 tthroat: 280 mmstroke: 140 mmtable-size: 750 x 520 mmStrole of rum/minute: 100 ram adjustable: 55 mmstroke adjustable from - to: 10 - 140 mmmould space: 340 mmhole in the table: 230 x 175 mmtable adjustable: 220 mmtool hole in ram: 40 mmtotal power requirement: 2,95 kWweight of the machine ca.: 2,8 tdimensions of the machine ca.: 1,5 x 1,2 x 2,4 mCondition: ready for operation: Video(s) available on our website.: Electric 380 Volt: Foot switch: adjustable table: Single column eccentric press with rotary wedge coupling, adjustable table,stroke + ram and flywheel drive. Approved only for safe tools and solid onesshields!Last test according to the test report July 2022: Everything is OK.Machine dealer with own stock of 1600 m².The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Machine Type: Eccentric Press Manufacturer: MÜLLER Model: Amp 100 Year of construction: 1967 Condition: very good Offer Type: Used Machine Specifications: Compressive force: 100 t Projection: 310 mm Table: 910 x 600 mm Installation height: 410 mm Stroke: 10 – 100 mm Propulsion: 5.5 kW Remark: pneumatic two-hand and foot actuation, 80 ram strokes per minute, Plunger adjustment 60 mm, adjustable punching table, additional punching plate 890 x 595 x 85 mm Weight: 5300 kg The machine is in a very good condition and ready for immediate use and can be viewed and demonstrated by us. We would be pleased if you are interested in our offer. Errors, modifications and prior sale excepted.

Specifications: Capacity 300 to Stroke rate 35 strokes Plunger width 1000 mm Projection 450 mm Plunger stroke 20 - 140 mm Plunger adjustment 80 mm Engine power 30 hp Weight roughly estimated 18 tons

Eccentric press make MÜLLER type ExP 35Machine -No: 927171 built in 1971Technical specifications:Printing capacity: 35 tProjection: 220 mmRam strokes: 110 HpM.Adjustable ram: 53 mmAdjustable stroke: 1 - 70 mmTable surface area: 580 x 495 mmMotor power: 3.0 HPDimensions approx: 1100 x 1300 x 2000 mmWeight approx: 3500 kgWith- Protective screen- foot switch- height adjustable table- Protective screenused, in good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools

Specifications: - Compressive force 60 t - Projection 350 mm - Table size approx. 900 x 600 mm - Table height adjustable - Diarrhea hole in the table approx. 300 x 200 mm - maximum installation height approx. 360 mm - Stösselfläche approx. 340 x 160 mm - Cone hole in the plug 40 mm - Plug adjustability 60 mm - Stroke adjustment 10 - 90 mm - Stroke rate 110 1/min - 2 hand operation - Pneumatic connection 6 bar - Flywheel drive / speed infinitely adjustable - Rotary wedge coupling - Drive 400 V / 5.5 kW - Space requirement approx. W 2000 x H 2200 x D 2400 mm - Weight approx. 4500 kg - mechanical clamp feed MABU type ZPL 11 with 3 roller straightener

Eccentric press make MÜLLER type ExP 60 SV/HKMachine -No: 6030790Technical specifications:Max. pressing force: 60 tProjection: 280 mmInstallation height: 360 mmTable surface: 750 x 560 mmDrop Hole: 300200mmTable adjustable: 160 mmRam area: 380 x 200 mmPlunger adjustability: 60 mmRam strokes per minute: 110Plunger adjustable: 10 - 90 mmMotor power: 4.0 kWWeight approx.: 3950 kgwith- Control SIEMENS Simatic OK 27- hydraulic clutch- adjustable table- Two-hand disengagement- straightening unit- Roller feed- Safety device according to UVVused, in good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools

Table eccentric press make MÜLLER type ExPT 12Machine -No: 0331188 built in 1988Technical specifications:Max. Punching capacity: 12 tProjection: 160 mmStrokes per minute: 120Slide adjustment: 40 mmAdjustable stroke: 8 - 80 mmTable size approx: 490 x 300 mmDrive power: 1.1 kWDimensions approx .: 2100 x 1200 x 1950 mmWeight approx: 2500 kgWith- pneumatic coupling- AMT material feed deviceused, in very good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools

Inv. Num. : 6682 Type: PDE 100 RF-HK Producer: Müller Created: 2000 Parameters: Control system: SIEMENS SIMATIC Compressive force: 1000 kN Stroke length: 330 mm Maximum stroke rate per minute: 55 1/min Adjustment of the plunger: 100 mm Main engine power: 11 kW Machine height: 2600 mm Machine length: 2200 mm Machine width: 2000 mm Machine weight: 7500 kg Equipment: Technical Documentation

Netzsch Ceramic press #5346 Size 03 In good condition

Description: Machine number: 0031288 Operating voltage: 380 V Connection: 5.5 kW Pressing force: 1000 kN Projection: 300 mm Ram strokes: 100/min Adjustable ram: 60 mm Adjustable stroke: 10 - 100 mm Table dimensions: 900 x 590 mm Attention: the clamping tool located on the table topweight approx.: 5,700 kg, Approx. Onsite Dimension. (l x w x h): 2,000 x 1,600 x 2,500 mm

Description: Machine number: 12965 Printing capacity: 250000 kg Feed size: 300 x 5 mm Belt infeed height (with plate): 125 - 315 mm Additional device: 2-hand operation Projection: 450 mm Installation height center dimension (without plate): 350 mm Clamping plate thickness: 110 mm Trunnion Ø: 65 mm Plunger strokes: 35 min. Adjustable ram: 80 mm Stroke adjustable: 20 - 140 mm Motor power: 20 HP Voltage: 380 V Lower table top dimensions: approx. 1200 x 850 mm Upper table top dimensions: approx. 750 x 330 mm With electronic roller feed: Dreher WAV-RDS-2E 1160B, serial no. 940059, year of manufacture 1994, feed 300 x 3 mm With reel straightening machine combination: BBT ABH 1100 / BRM 300, year of manufacture 2019, feed 300 x 3 mm With minimum quantity lubrication: Schmidtweight approx.: 8,000 kg, Approx. Onsite Dimension. (l x w x h): 2,800 x 1,210 x 3,000 mm

PLASOMAT PMS 63 CP eccentric press was manufactured in Poland. In order to meet all production requirements, the machine features a large area slider with the possibility of adjusting the height and number of strokes in the control cabinet. In addition, a stable, deformation-resistant monolithic structure combined with a high pressing force of 63 tonnes ensures the highest accuracy and precision in machining. All this makes the PMS 63 CP press the ideal choice for both small batch and high volume production. The offer includes additional equipment, consisting of among others 8 anti-vibration pads and an intermediate table. Technical specifications of the PLASOMAT PMS 63 CP press - maximum press force: 63 t (630 kN) - work table dimensions (L x W): 800 x 560 mm - number of slider strokes: 65-85/min - maximum slider stroke: 110 mm - minimum slider stroke: 8 mm - slider adjustment: ...

Stock Number: 3785 ECCENTRIC PRESS Manufacturer: PMB, Type: EPFT 100 Machine NO.: 004301, Year of manufacture: 2002 Specifications: Table size 780 x 590 mm Stroke length 8-120 mm Number of strokes per minute 55 Projection 300 mm Operating height 395 mm Total power 7.5 kW Pneumatic clutch. Gear ratio. Hydr. Overuse protection. Weight: 5500 kg

Used Mechanical C-Frame Press PRESSIX 130 ton used machine in excellent condition dimension table 700 x 1200 mm dimension ram 550 x 800 mm adjustable slide 110 mm

pressure: 125 tthroat: 300 mmstroke: 10 - 135 mmno. of strokes: 50 Hub/mindayligth: 315 mmdistance table - lower edge of ram: 450 mmram adjustment: 60 mmtable-size: 600 x 900 mmram head dimension: 315 x 550 mmwork height max.: 800 mmtable hole: 250 mmram hole: 50 mmtotal power requirement: 11,0 kWweight of the machine ca.: 5,5 tdimensions of the machine ca.: 1,65 x 1,68 x 2,87 mThis eccentric press machine with 80 ton capacity is suitable to carry out tasks involving deep-drawing, cutting, punching and stamping. Our Profi Press mechanical presses can be used for various applications in many different industries: the automotive, railway and aerospace industries (for example) and many more related industries that use metal forming.Made of S355JR steel and equipped with a 4 guided ram. The rod is made out of high-strength forged steel and high-performance alloy bushings. This high performa ...

pressure: 60 tthroat: 235 mmstroke: 10 - 100 mmno. of strokes: 60 Hub/mindayligth: 270 mmdistance table - lower edge of ram: 370 mmram adjustment: 50 mmtable-size: 470 x 700 mmram head dimension: 310 x 410 mmwork height max.: 670 mmtable hole: 190 mmram hole: 40 mmtotal power requirement: 4,0 kWweight of the machine ca.: 3,5 tdimensions of the machine ca.: 1,23 x 1,46 x 2,35 mThis eccentric press machine with 80 ton capacity is suitable to carry out tasks involving deep-drawing, cutting, punching and stamping. Our Profi Press mechanical presses can be used for various applications in many different industries: the automotive, railway and aerospace industries (for example) and many more related industries that use metal forming.Made of S355JR steel and equipped with a 4 guided ram. The rod is made out of high-strength forged steel and high-performance alloy bushings. This high performanc ...

pressure: 80 tthroat: 250 mmstroke: 10 - 115 mmno. of strokes: 60 Hub/mindayligth: 285 mmdistance table - lower edge of ram: 400 mmram adjustment: 50 mmtable-size: 500 x 750 mmram head dimension: 340 x 440 mmwork height max.: 700 mmtable hole: 220 mmram hole: 45 mmtotal power requirement: 5,5 kWweight of the machine ca.: 4 tdimensions of the machine ca.: 1,5 x 1,4 x 2,5 mThis eccentric press machine with 80 ton capacity is suitable to carry out tasks involving deep-drawing, cutting, punching and stamping. Our Profi Press mechanical presses can be used for various applications in many different industries: the automotive, railway and aerospace industries (for example) and many more related industries that use metal forming.Made of S355JR steel and equipped with a 4 guided ram. The rod is made out of high-strength forged steel and high-performance alloy bushings. This high performance Pro ...

Eccentric press make RUHRMANN type ASR 45Ser. -No: 14326 Year 1996Press force: 45 tRam adjustment: 100 mmadjustable stroke: 20 - 200 mmPusher strokes: 40 - 160 per minuteTable size: 900 x 800 mmPlunger surface: 600 x 400 mmlargest distance table - ram: 800 mmInstallation height: 790 mmDiarrhea hole: 400 x 600 mmMax. Tool weight: 500 kgMotor power: 7.5 kWWeight approx: 7800 kgExternal dimensions approx: 1400 x 1600 x 3100 mmWith- Control Siemens Simatic OP 7- transverse shaft- swiveling control panel- Electric control cabinetused, in good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools

Inv. Num. : 7507 Type: 160 Producer: Rusko Generated: Parameters: Compressive force: 160 t

Capacity: 50 ton Projection: 225 mm Stroke: 320 p/min Large table: 500 x 800 mm

Specifications: Capacity 63 tons Stroke rate 140 h/min Projection 250 mm Plunger stroke 8-100 mm Table , WxD approx. 700 x 480 mm Installation height approx. 400 mm

Specifications: Capacity 63 tons 2 strokes 105 rpm and 140 rpm large projection 450 mm ! Plunger stroke 8-100 mm Plunger adjustment approx. 70 mm Table , WxD approx. 700 x 780 mm Plunger, W x D approx. 450 x 280 mm

Description: press power: 63 t table dimensions L×W: 700x550 mm table opening LxW: 265X265 mm presser LxW: 320x300 mm presser stroke: 130 mm (fixed) max distance of the presser from the table: 400 mm PLC components: SIEMENS SIMATIC S7-300 pneumatic components: FESTO commands: single (foot-shoe, two-handed-lever), continuous (automatic mode-setting time interval 1-99999s and number of repetitions 1-32000) a special function for determining the lower position of the presser automatic lubrication of the machine pneumatic triggering and braking Max. pressing force: 63 to, stroke: 130 mm, table surface area l x w : 700x550 mm, weight approx.: 4,500 kg, Approx. Onsite Dimension. (l x w x h): 1,800 x 1,300 x 2,500 mm

Description: Stroke of the ram: 8 - 58 mm Pressing force: 10 to Flywheel: 125 rpm Table dimensions: 320 x 320 mm Hole diameter: approx. 85 mmweight approx.: 500 kg, Approx. Onsite Dimension. (l x w x h): 900 x 800 x 1,800 mm

Description: Serial number: PN63/250 69/32.0458/2 Press force: 63 t Ram stroke: 8 - 100 mm Stroke number: 140/min Lower table top dimensions: approx. 720 x 500 mm Upper table top dimensions: approx. 450 x 280 mmweight approx.: 2,000 kg, Approx. Onsite Dimension. (l x w x h): 1,600 x 1,400 x 2,500 mm

Article number: 13-20-001 Manufacturer: Schuler Good general condition Machine workshop-tested Shipping time: All rights reserved. Year of construction: ca.1965 L x W x H: approx. 1200x1800x2400 Weight: approx. 2500kg Compressive force: approx. 25000kg Stroke of ram: approx. 8-59mm Max. installation height: approx. 550-1150mm Power requirement: approx. 1.5 hp Other accessories on request Price and other technical data on request

throat: 275 mm, table surface area l x w : 750x460 mm, weight approx.: 2,000 kg, Approx. Onsite Dimension. (l x w x h): 1,300 x 800 x 2,300 mm

Description: Type: Mechanical  ,Force: 200 tn Travel : 50 mm  ,Table dimensions: 800x800 mm ,  ,Distance between plates: 400 mm ,  ,Strokes: 60 m/min  ,weight approx.: 9,100 kg, Approx. Onsite Dimension. (l x w x h): 1,500 x 1,550 x 3,450 mm

The press has been completely renovated. Scope of work: cleaning and repainting of the body and covers, regeneration of clutch wheel disc linings, new pneumatic installation, new electrical installation, new control (Fiessler FMSC controllers, Siemens control panel, foot limit switch), installation of feet, new user manual and documented modernization history. Original documentation available. Pressure: 25 tons Max. number of strokes/min: 125 Slider stroke: 8-60mm Slider adjustment range: 55mm Weight: 1400 kg

SPK KB 2132 eccentric press was manufactured in the USSR in 1980. Operating with a force of 160 tonnes, the press of almost indestructible design offers the highest quality and precision during the most demanding workpiece machining. The machine’s equipment includes among others a pneumatic clutch, a large-area slider performing up to 71 strokes per minute, central lubrication and manual control. The total weight of the press is 13200 kg. Technical data of the SPK KB 2132 press - maximum press force: 160 t - work table dimensions (L x W): 1000 x 700 mm - maximum slider stroke: 160 mm - minimum slider stroke: 25 mm - slider dimensions (L x W): 580 x 460 mm - slider adjustment range: 120 mm - slider stroke rate: 71/min - intermediate plate thickness: 110 mm - distance between work table and slider (slider in lower position, largest stroke, connector unscrewed): 480 mm - bore ...

throat: 300 mm, table surface area l x w : 690x500 mm, weight approx.: 3,000 kg, Approx. Onsite Dimension. (l x w x h): 1,800 x 800 x 2,300 mm

Rated press force 400 kN Impact stroke 8-95 mm Stroke stroke number 70/142 /min Impact adjustment 60 mm Table area 660x530 mm Impact surface 400x250 mm Recording 3-4 kW Compressed air operating pressure 0.6 Mpa

Overall size: 900x900x1800 mm Stroke length: 80 mm Weight: 702 kg The machine used for electric motor coal/carbon brush pressin

UVV maintenance according to BG guideline BGR 500 Pradler Maschinen Service & Electrical Engineering Recognised maintenance technician On-site inspection , Test report Creation , Sealing Occupational safety (trailing measurement safety distance ) Operational safety according to DGUV regulation 3

Description: 1x construction year 1971 1x year of construction 1979 Number of strokes: 125 Tappet adjustable: 60 mm Incl. inclined roller conveyorMax. pressing force: 45 to, stroke: 15 - 75 mm, throat: 250 mm, total power requirement: 2.2 kW, weight approx.: 3,000 kg, Approx. Onsite Dimension. (l x w x h): 3,500 x 1,800 x 2,100 mm

Description: Serial no.: 058-005/9 Nominal force: 160 Np Operating pressure: 144 kg/cm² Plunger stroke: 500 mm Projection: 380 mm Maximum distance between table and ram: 800 mm Downward speed: 200 mm/s Trunnion Ø: 40 mm Installation height: 300 - 800 Upwards speed: 250 mm/s Table size: 900 x 630 mm Plunger surface: 530 x 400 With deep-drawing device under the worktop Additional equipment: 2-hand operation, additional ram 250 x 200 Caution: Stand cracked and secured with frame.Max. pressing force: 160 to, weight approx.: 7,500 kg, Approx. Onsite Dimension. (l x w x h): 2,400 x 1,400 x 3,600 mm

Press force: 300 t Stroke length: 200 mm Stroke speed: 20-60 1/min Shut height: 680 mm Ram adjustment: 200 mm Overall size: 2600x2000x4200 mm

Eccentric press VSS LE 400 C

Inv. Num. : 5696 Type: LE 160 Producer: Východoslovenské Strojárne Košice Created: 1977 Parameters: Compressive force: 160 t Maximum stroke rate per minute: 45 1/min Stroke: 20-120 mm Plunger adjustment: 100 mm Machine weight: 8700 kg

Specifications: Capacity 40 tons 2 strokes 57 + 86 H/min Projection 250 mm Plunger stroke 8 - 88 mm Plunger adjustment approx. 63 mm Table , WxD approx. 570 x 450 mm Max. installation height approx. 330 mm

Eccentric press vineyard type AR160 tons With protective shield. YOC 1971 2 rotational speeds via mechanical gearbox Switchable. Central lubrication. Low-wear steep-threaded coupling. Table dimensions : 800x1000 mm Visits : possible at any time. Total weight approx. 10.5 tons

Eccentric press make WEINGARTEN type ARV 63Order number. 121101, built in 1971Technical specifications:Pressing force: 63 tgr. sheet thickness: 10 mmDischarge: 270 mmTable: 760 x 480 mmDiarrhea hole in the table: 250 x 150 mmNumber of strokes: 56 and 84 / mingr. distance table - ram: 500 mmkl. Distance table - ram: 200 mmRam stroke: 8 - 100 mmRam adjustment: 63 mmExternal dimensions L x W x H: 900 x 2000 x 2600 mmWeight approx: 4 tonsWith- UVV for inlays- EMERGENCY STOP SWITCHused, in good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools

WEINGARTEN ER 100 Eccentric press Capacity 100 t Table 710 x 570 mm Sheet thickness 12 mm Number of strokes 55 spm Ram stroke 8-112 Ram adjustment 80 mm

Description: Delivery date: 28.9.62 Pressing force: 40 t Largest sheet thickness: 4 mm Stroke number: 130/min Ram stroke: 8 - 88 mm Ram adjustment: 63 mm Largest distance between table and ram with max. stroke at bottom, adjustment at top, table at the bottom: 400 mm Smallest distance between table and ram with max. stroke at bottom, adjustment at top, table at top: 160 mm Lower worktop dimensions: approx. 550 x 440 mm Upper worktop dimensions: approx. 350 x 230 mm With safety screenweight approx.: 3,000 kg, Approx. Onsite Dimension. (l x w x h): 1,100 x 1,600 x 2,400 mm

Type / type: N 25 Year of make: 1977 Manufacturer / make: Weingarten Rated pressure: 25 t Number of strokes: 140 / min Radius slide center to frame: 200 mm Window in frame: 240 mm distance table slide: 250 mm Stroke adjustment / adjustment of stroke: 8 ... 80 mm Ram adjustability/adjustment of ram: 50 mm Ram size / surface of ram: 355 x 220 mm Table size / surface of bed: 560x 400 mm Hole in table: 160 mm Power of main motor:3 kW Weight / weight: 2,23 t

Description: Control type conventional Stroke rate: 56 / 84 1 / min Clearance between body walls: 320 mm Installation height (max. stroke at the top, stowage at the top): 415 mm Table surface: 710 x 500 mm Passage opening in the table: 320 mm Table height above floor: 800 mm Plunger surface: 450 x 280 mm Plunger adjustment: 63 mm Permitted only for safe tools or fixed screen according to the German Safety Regulations (UVV) with friction clutch, mechanical overload protection in ram, inclineableMax. pressing force: 63 to, stroke: 8 - 100 mm, throat: 250 mm, table surface area l x w : 710 x 500 mm, weight approx.: 4,100 kg, Approx. Onsite Dimension. (l x w x h): 1,350 x 2,000 x 2,600 mm

Description: Delivery date: 17.01.1963 Order number: 138/62 Pressing force: 60 t Largest sheet thickness: 10 mm Stroke number: 65/min Ram stroke: 6 - 120 mm Lower table top dimensions: 700 x 400 mm Upper plate dimensions: 240 x 240 mmweight approx.: 2,000 kg, Approx. Onsite Dimension. (l x w x h): 1,500 x 1,400 x 2,200 mm

heavy press with casting stand

Inv. Num. : 7283 Type: PME 315 T Producer: WMW Generated:- Parameters: Compressive force: 315 t Table length: 2220 mm Table width: 1225 mm Maximum stroke rate per minute: 75 1/min Plunger adjustment: 130 mm