1.0 St. gebr. Image Processing Measuring Device Manufacturer: MITUTOYO Type: QS200Z Year of Make: 2011 For technical data, see photos.
Inv. Num. : 9022 Type: CRYSTA APEX C9206 Producer: Mitutoyo Created: 2006 Parameters: Axis X: 2000 mm Axis Y: 900 mm Axis Z: 600 mm Max. workpiece weight: 400 kg
MITUTOYO Crysta Apex CRT-A910 coordinate measuring machine was built in Japan by Mitutoyo Corporation. This extremely advanced machine, characterised by the highest accuracy and objectivity, is used for highly accurate workpiece measurements. Workpiece measurements are performed using the contact or non-contact method, which are then represented as a set of coordinate points. The use of this method makes it possible to measure parts with very complex shapes, which cannot be measured with ordinary measuring instruments. The MITUTOYO Crysta Apex CMM measuring machine is offered with a PC with software. Technical specifications of the MITUTOYO Crysta Apex CRT-A910 measuring machine - measuring range in the X/Y/Z axis: 900/1000/800 mm - measuring resolution: 0.1 µm - measuring speed: 300 mm/s - PC with software - compressed air pressure: 0.4 MPa - compressed air consumption: 50 l/m ...
Two digital calipers Digital caliper Mitutoyo 551-231-10, measuring range 300mm Digital caliper Mitutoyo 500-181-U, measuring range 150mm The batteries have been renewed or are in order. The measuring tools can be demonstrated on site by appointment. We offer only machines that are ready for demonstration in our warehouse, see "other offers of this year". provider".
Digital Screw Gauge from Mitutoyo 400-425 mm Overgrip new in the original wooden box with test certificate
3 Pieces Mitutoyo Micrometers with Digital Display Mechanical as good as new unused / measuring surfaces are still sealed from old stock without transport box very good condition
Mitutoyo U-Clamp Gauge as good as new unused Mod. 105-408 Gauge 1000-1100 mm in the original List price 3450 €
Key data: 508 mm, 406 mm, 406 mm
Coordinate measuring machine X 508 mm Y 406.4 mm Z 406.4 mm Software: CMM Manager or Verisurf Probing System: Renishaw PH10T/TP20 Controller Type: Mitutoyo UCC200 All information without guarantee Attention: The measuring machine has PC damage, but otherwise the structure is perfect. Dongle is available Sold as a defect! New price was approx. 38,000.00 euros
Inv. Num. : 7182 Type: Crysta Plus M544 Producer: Mitutoyo Created: 2012 Parameters: Table dimensions: 860 x 638 mm Axis X: 505 mm Axis Y: 405 mm Z axis: 405 mm Max. workpiece weight: 180 kg Machine dimensions: 2185 x 1082 x 1078 mm Machine weight: 440 kg
THE quick scope CNC offers the following advantages: coaxial -, through - and ring light illumination allows the user an optimal illumination of the workpieces to be measured. The powerful QSPAK software-based Windows® is easy to use and offers a wide range of measurement and analysis capabilities. Functions such as zoom, auto-focus, repeat mode, one-click Tools, graphical representation and 48 different macros solve measurement tasks quickly and easily. It only the joystick is. • ï?· measuring range: (X, Y, Z axis) 200 x 250 x 100 mm • ï?· type: QA 359 • ï?· resolution μ m: 0.1 • ï?· sensor type: color CCD • ï?· lenses: zoom type • ï?· magnification (optical): 0, 5 x-> 3, 5 x • ï?&mi ...
Year of manufacture: 2015 Key Features: Manufacturer: Mitutoyo Corporation Model: PJ-A3000 Projection Screen: Ø 315 mm Magnification: 10× standard (optional 20×, 50×, 100×) Measurement Accuracy: ±0.001 mm (XY resolution) Table Travel: Various measuring ranges depending on model (up to 200×100 mm) Illumination: Halogen lamp 24 V / 150 W Functions: Digital XY readout, angle measurement, RS?232C interface Max. Workpiece Height: approx. 92.5–123.5 mm Special Features: Telecentric optical system for distortion-free projection, rotatable table, manual focusing Condition: Used, tested, and fully functional. Applications: Ideal for metal and plastic processing, training, laboratories, and precision measurements. The machine can be inspected under power by appointment. Technical specifications are subject to change, errors and prior sale reserved.
3D CNC coordinate measuring machine Type: Crysta-Apex C9206 Manufacturer: Mitutoyo Year: 2006 Calibrated 4/2025 X: 900 mm Y: 2000 mm Z: 600 mm Table load: 400 kg Machine weight: 3900 kg In good condition, fully functional, under power Find more here - / Contact us at -
Mitutoyo Formtracer AvantYear of manuf. : 2023 ____________Description:Technical Data:Movement in X/Z:100/500 mmClampingsurafce:600 x 450 mmCrossslide (X/Y):100/50 mmEquipment/Accessory:Formtracer:FTA-H4 D3000-DContracer:C-3200Surftest:S-3000Operation:Control unit with JoystickWeiteres Zubehör:Turnable vice, calibration blocks, Protective tarpauline
amplification -fold: 10-fach diameter: 500 mm workpiece height max.: 210 mm digital readout: 2 Achsen MITUTOYO travel x / y: 200 / 100 mm table-size: 530 x 250 mm glass plate - dimensions: 270 x 170 mm voltage: 230 V weight of the machine ca.: 210 kg dimensions of the machine ca.: 0,80 x 1,05 x 1,70 m - Serial-No.: --- - 2-Axis digital readout The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
This 3-axis Mitutoyo QV-L404Z1L-D was manufactured in 2020. It features an X-axis travel of 400 mm, Y-axis travel of 400 mm, and Z-axis travel of 200 mm. The machine is equipped with advanced measurement capabilities, including video and touch probe measurement methods. If you are looking to get high-quality measurement capabilities, consider the Mitutoyo QV-L404Z1L-D CMM machine we have for sale. Contact us for further details.
This 5-axis Mitutoyo Crysta-Apex C9206 was manufactured in 2006. It features an impressive X-axis travel of 905 mm, Y-axis travel of 2005 mm, and Z-axis travel of 605 mm. The machine includes a measuring table size of 1080 x 2720 mm, providing ample space for various applications. If you are looking to get high-quality measurement capabilities, consider the Mitutoyo Crysta-Apex C9206 CMM machine we have for sale. Contact us for further details.
X-axis: 505mm, y-axis: 405mm, z-axis: 405mm, number of M8 threaded holes: 9, max. workpiece height: 545mm, max. table load: 180kg, accuracy: ISO 10360-2, resolution: 0.1µm, guide system: air bearings on all axes, traverse speed CNC mode: 8-300mm/s (max. 520mm/s), joystick rapid traverse: max. 80mm/s, slow: 0.05mm/s, measuring speed: 1-8mm/s (CNC), acceleration: 0.13g (max. 0.23g), measuring table material: granite, table dimensions: 638x860mm, compressed air consumption: approx. 50l/min at 0.4MPa, length: 1122mm, width: 1082mm, height: 2185mm, weight (incl. table and control): 515kg. An on-site inspection is possible.
Reading type: . 0 weight - pallet system: . kg length: . mm 1 Posten Bügelmessschrauben 400-500 mm 700-800 mm 800-900 mm 900-1000 mm The technical data is provided by the manufacturer or operator and is therefore non-binding. We reserve the right to sell the machine prior to purchase, our terms and conditions of sale apply exclusively. About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If you are interested in selling machines, production lines, or your business, please contact us. You can find further offers on our website. Tours are possible by appointment. We look forward to your visit. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Outside micrometers, micrometer screws, outside micrometers -Manufacturer: Mitutoyo, outside micrometer -Measuring range: 50-75 mm mm -Reading: 0.01 mm -Locking device -Other sizes: also available -Dimension box: 250/145/H35 mm -Weight: 0,7 kg
Height gauge, parallel gauge, height measuring device -Manufacturer: Mitutoyo, Height Gauge Type HS-100 -Max. working height: 1000 mm -Dimensions: 250/155/H1340 mm -Weight: 15.6 kg
Internal micrometer screws, micrometer screw, inner diameter, internal fine measuring instrument, cylinder gauge, -Handover: in its current condition as inspected -Condition: incomplete, see pictures -Measuring range: -150 mm -Dimensions: 280/450/H60 mm -Weight 2 kg
Micrometer screws, micrometer screws, tooth width measurement, plate measuring surfaces -Measuring range: 275-300 mm -One rotation of the drum corresponds to: 0.5 mm -with locking device -Measuring force: Ratchet -Adjustable dimensions -Hand protection -Key -Quantity: other sizes also available -Weight: 1.5 kg
Height gauge, parallel gauge, height gauge -Manufacturer: Mitutoyo, height gauge type 192-104 -Max. Working height: 600 mm -Dial indicator: measuring accuracy 0.01 mm -Analog display: double counter -Dimensions: 275/120/H795 mm -Weight: 8.7 kg
Machine Details - Manufacturer: Mitutoyo - Model: Euro C-Apex 122010 - Year of manufacture: 2001 - Type of Machine : Coordinate Measuring Machine - The regular factory calibration was last performed in March 2012 - In operation until 2013. In 2013, it was professionally dismantled by Mitutoyo. It was then stored in an industrial building. Measuring Range - X-axis: 2000 mm - Y-axis: 1200 mm - Z-axis: 1000 mm Technical Specifications - Accuracy (ISO 10360-2): E = 4.9 + 5L/1000 um - Probing error (ISO 10360-2): R = 5.0 um (TP200) - Resolution: 0.0001 mm - Guide system: Air bearing on all axes - Length standard: Linear encoder - Measuring table material: Granite - Maximum workpiece height: 1115 mm - Maximum workpiece weight: 2000 kg - CNC measuring speed: 1 to 3 mm/s - Maximum drive speed: 430 mm/s Included Equipment - Probe head: Renishaw PH 10 - Probe system: TP 200 - Stylus rack: 6 ...
Measuring range: 16 mm Angle: 60 ° weight: 500 gr The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
This 3-axis Mitutoyo Quick Scope QS-250 Z was manufactured in 2010, featuring a joystick box, various clamping lugs, and profile strips for versatile setup options. It includes MAG1 mounting and both short and long spring clips for precise optical measurement tasks. Consider the opportunity to buy this Mitutoyo Quick Scope QS-250 Z optical measurement machine. Contact us for further details regarding this machine.
CMM machine manufactured in 2004. This Mitutoyo Crysta-Apex C 776 features a measuring range of 700 mm in both X and Y axes, and 600 mm in Z. It includes advanced components such as a motorized Renishaw probe head and automatic temperature compensation. If you are looking to get high-quality measurement capabilities, consider the Mitutoyo Crysta-Apex C 776 machine we have for sale. Contact us for further details.
A Mitutoyo coordinate measuring machine overhauled in 2023 is available. Measuring dimensions X/Y/Z: 705mm/1005mm/605mm, max. workpiece height: 800mm, table dimensions X/Y: 880mm/1720mm, max. table load: 1000kg, resolution: 0.1µm, traverse speed: 520mm/s, measuring speed: 8mm/s. Machine dimensions X/Y/Z: approx. 1500mm/2000mm/2750mm, weight: approx. 2000kg, control: GEOPAK and CAT 1000 PS. Including various probe trees. Documentation available. On-site inspection is possible.
This 3-axis Mitutoyo Quick Scope QS-250Z was manufactured in 2001. It features a measuring range of X=200 mm, Y=250 mm, Z=100 mm, and a maximum travel speed of 80 mm/s. The machine includes a 1/3 CCD color camera and various lighting options, enhancing visibility and precision. Ideal for detailed component analysis, consider the opportunity to buy this Mitutoyo Quick Scope QS-250Z CMM machine. Contact us for more information about this machine.
