Continuous/normal drilling power (mm) R1 (gemes. Drehmom. Nm) 30/35 (in E3335/ST60) (135) R2 (gemes. Drehmom. Nm) 27/32 (in E335/ST60) (90) Thread cutting performance max. (slope-dependent) R1 M30x3.5 R2 M24x3 Spindle MK IV Drilling depth (mm) 160 Extension (mm) 300 Column diameter (mm) 140 Usable table area (W x D) (mm) 590 x 450 Speed display digital Drilling depth display digital Drilling depth stop with fine adjustment Table height adjustment with rack Spindle/table (mm) 150-700 Machine dimensions without VP (mm) 610 x 900 x 1,980 mm Machine dimensions with VP (mm) 670 x 1,100 x 2,200 mm Motor rotary current 400V with frequency inverter (kW) 4.0 Spindle speeds infinitely variable R1 (1-stage) 0-1000 rpm R2 (1-stage) 0-1600 rpm Feed by hand Weight (kg) 400 Optional (780 EUR) drilling package 5,beststretched from: Vice [felix] 125 Cone mandrel MK III/B ...
bore capacity in steel (diameter): 40 mmthroat: 300 mmbore stroke: 170 mm: 4 speeds: 70 - 1400 U/mintable-size: 600 x 450 mmtotal power requirement: 3,0 kWweight: 350 kgdimensions: 1200 x 800 x 2150 mmColumn drilling machine OPTIdrill DP 33V promotion set / 3020680SETWith an electronically controllable drive in a modern design Industrial engine Quiet running spindle thanks to new spindle design Machine operation with safety electronics in 24 V direct current Guaranteed concentricity = 0.02 mm in the measured drilling spindle Clockwise/counterclockwise rotation Precision spindle bore Control panel with user-friendly, dirt and water resistant Membrane keyboard RPM display Separate emergency stop button Tapping function Precisely crafted, stable drill table with diagonal T-slotswith all-round cooling water channel, can be tilted sideways by ±45° and rotated by 360° Drilling depth stop LE ...
Drilling capacity max.: 35 mm Thread cutting: M 24 Tool rear ham: MK 4 Spindle speeds, infinitely variable: 65 - 2000 rpm Extension: 265 mm Drilling depth: 150 mm Pinole feed: 0.05 / 0.1 / 0.2 mm/U Column diameter: 115 mm Table size / T groove size: 685 x 485 mm / 14 mm Engine power: 1.5 kW Machine dimensions (W x D x H): 950 x 580 x 2000 mm Weight approx.: 385 kg Characteristics: - Vario drive for infinitely variable adjustment of the desired speed - Pinole delivery either by hand or by mechanical feed - Set speed by means of digital display quickly and easily readable - Stable casting table with T-slots and coolant gutter - Adjustable drilling depth stop, drilling depth can be read by scale - Thread cutting device - Gearbox pre-bed - CE / IEC, German Documentation and German Service Delivery: - Table clamping and height adjustment from the front - Quick-clam ...
spindle cone: MK 1 turning speeds: 200 - 3000 U/mintable-size: 300 x 220 mmtotal power requirement: 520 Wweight of the machine ca.: 200 kgdimensions of the machine ca.: 8004001800 mmThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Drilling capacity max.: 30 mm Thread cutting: M 14 Tool rear ham: MK 3 Spindle speeds, infinitely variable: 150 - 2500 rpm Extension: 265 mm Drilling depth: 150 mm Pinole feed: 0.05 / 0.1 / 0.2 mm/U Column diameter: 92 mm Table size / T-slot size: 500 x 400 mm / 14 mm Engine power: 1.5 kW Machine dimensions (W x D x H): 640 x 850 x 1850 mm Weight approx.: 265 kg Characteristics: - Vario drive for infinitely variable adjustment of the desired speed - Pinole delivery either by hand or by mechanical feed - Set speed by means of digital display quickly and easily readable - Stable casting table with T-slots and coolant gutter - Adjustable drilling depth stop, drilling depth can be read by scale - Thread cutting device - CE / IEC, German documentation and German service Delivery: - Quick-clamp chuck 1 - 16 mm / B 18 - Drill chuck mandrel MK 3 / B 18 - Coolant dev ...
bore capacity in steel (diameter): 50 mmbore capacity in cast iron (diameter): 60 mmthreading cutting capacity:: M42 throat: 360 mmbore stroke: 200 mmspindle taper: MK 4 feed range - spindle: 0,1-0,2-0,3-0,4 mm/Uspindle turning speed range: 190 - 1900 U/mincolumn diameter: 175 mmtable surface area: 550 x 550 mmtotal power requirement: 4 kWweight of the machine ca.: 0,85 tdimensions of the machine ca.: 2,2 x 0,7 x 1,3 m- large stepless speed range in 3 stages- mechanical speed adjustment with hand lever (model V)- electronic speed adjustment with frequency converter (model VE)- Front digital speed display- Gear lubrication by automatic oil pump VE”- Machine base plate with integrated coolant device- Machine light- MGI rotating and tilting table- Advance and automatic retraction with electromagnetic clutch- Front hand wheel for fine adjustment of the manual feed- Scale with adjustable dr ...
Continuous drilling capacity: 25 mm Normal drilling capacity: 30 mm Thread cutting power: M 16 Spindle: MK 3 Drilling depth: 135 mm Spindle speeds infinitely variable: 150 - 3000 rpm Table size: 460 x 360 mm Weight: 225 kg Mains connection: 400 volts, 50 Hz Facilities: - Thread cutting device - Digital display for speed as standard - Coolant device - LED machine light - Stepless speed adjustment - 24 V Electric - Base plate with T-slots - Drilling table adjustable via rack and worm gear and swivelled around column - Emergency-off-strike button - Motor full protection - Star handle - CE compliant
bore capacity in steel (diameter): 34 mmthroat: 300 mmbore stroke: 150 mmbore capacity in cast iron (diameter): 40 mmthread capacity: M 27 spindle taper MT: 4 spindle speeds:: Stufenlos 100 - 2000 U/mincolumn diameter: 125 mmautomatic feeds: 3 / 0,1 - 0,2 - 1,3 table:: 400 x 420 mmDrive: Keilriemen total power requirement: 3 kWweight of the machine ca.: 360 kgdimensions of the machine ca.: 2,3 x 0,6x 1,1 m- Drilling machine of circular column feed automaticmechanical- Drive by electronic wide V-belt- Spindle taper: CM 4- Stepless speed adjustment with frequency converter- Potentiometer for speed adjustment- digital speed display- Automatic feed reversal when threading- Scale with adjustable drilling depth - automatic tool ejector- Push button for EMERGENCY STOP switch for right/left rotation- Electronic control integrated in the drill head - integrated coolant system- Machine light - hei ...
Duration / ALB ear power 35/40 mm Thread cutting capacity Max M30 (Steigungsabhängig) Hand-reversing switch for forward link. Undervoltage, thermal overload protection, Spindle MK 4 Drilling depth 160 mm Throat depth 300 mm 2johiqzz Column diameter 110 mm Usable surface [BxL] 420 x 340 mm Speed display scale Drilling depth indicator scale Drilling depth stop with fine adjustment Table height with rack and pinion Motor three-phase 400 V pole changing bar 1.5/3 kW Spindle speeds with continuously variable transmission 100-2000 1 / min Machine size (WxDxH) 610 x 850 x 1920 mm Weight 420 kg Including drilling package consisting: taper mandrel, Chuck, Vice and T - Groove set. Warranty: 3 years Shipping time: immediately, free loaded DELIVERY: free House including packaging NOT THE RIGHT MACHINE? WE DO ALSO OTHER AFLOAT PRODUCTS - ASK FOR A QUOTE! FLOTT BASE ...
bore capacity in steel (diameter): 35 mmthroat: 320 mmbore stroke: 150 mmspindle taper MT: 4 table-size: 500 x 400 mmspindle turning speed range: 75 - 3.010 U/minfeed range - boring: 0,1 / 0,15 / 0,22 / 0,33 mm/Uquill stroke: 150 mmvoltage: 400 Vtotal power requirement: 1,8 kWweight of the machine ca.: 275 kgdimensions of the machine ca.: 0,70 x 1,00 x 1,95 mthreading device: - Serial-No.: 138050673- Electromagnetic feed- Threading device- Machine vice 150 mm- Two clamping screws 14 mm- 9-piece drill cartridge 14.5 mm - 30 mm, MK 2 / MK 3- Cutting oil sprayThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Thread cutting device Freischneiden Setup Drilling depth shut off programmable Drilling depth and speed display - digital Thread cutting device M30 (depending on elevation) R1 spindle speed with continuous transmission speed series 100-2000 1 / min R2 spindle speed with continuous transmission speed range 70-1400 1/min Drilling capacity 35/40 mm Spindle MK 4 Drilling depth 160 mm Throat depth 300 mm Usable surface (pivoting) 590 x 450 mm Feed 0-300 mm / min stepless Table height with rack and pinion Machine dimensions (W x D x H) 610 x 850 x 1920 mm Motor three-phase 400 V pole changing bar 1,5/3,0 kW Weight 420 kg Including drilling package consisting: taper mandrel, Chuck, Vice and T - Groove set. Option: spindle stop and modulus of rupture of chip 660 EUR DELIVERY: free House including packaging NOT THE RIGHT MACHINE? WE DO ALSO OTHER AFLOAT PRODUCTS - ASK ...
bore capacity in steel (diameter): 32 mmthroat: 245 mmbore stroke: 135 mmspindle taper MT: 3 table-size: 410 x 380 mmspindle turning speed range: 10 - 2100 U/minvoltage: 400 Vtotal power requirement: 1,1 kWweight of the machine ca.: 210 kgdimensions of the machine ca.: 0,7 x 1,8 x 1,75 mthreading device: The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Drilling depth and speed display - digital Thread cutting device M30 (depending on elevation) R1 spindle speed with continuous transmission speed series 100-2000 1 / min R2 spindle speed with continuous transmission speed range 70-1400 1/min Drilling capacity 35/40 mm Spindle MK 4 Drilling depth 160 mm Throat depth 300 mm Usable surface (pivoting) 590 x 450 mm Feed by hand Table height with rack and pinion Machine dimensions (W x D x H) 610 x 850 x 1920 mm Motor three-phase 400 V pole changing bar 1,5/3,0 kW Weight 420 kg Including drilling package consisting: taper mandrel, Chuck, Vice and T - Groove set. DELIVERY: free House including packaging NOT THE RIGHT MACHINE? WE DO ALSO OTHER AFLOAT PRODUCTS - ASK FOR A QUOTE! FLOTT BASE PARTNER .
table-size: 280 x 360 mmquill stroke: 120 mmtotal power requirement: 0,8 kWweight of the machine ca.: 350 kgdimensions of the machine ca.: m- Manufacturer: Chemnitzer Maschinenbau GmbH Chemnitz- speed (stepless): 460 - 1840 U/min , 140 - 560 U/min- Table dimensions: 280 x 360 mm- Adjustment travel table: 540 mm- Holder: MK 2The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Thread cutting device Freischneiden Setup Drilling depth shut off programmable Drilling depth and speed display - digital Thread cutter M20 (depending on elevation) variable speed of 125-4000 U/mon in two stages, stage change of belt apportionment. Drilling capacity 25/30 mm Spindle MK 3 Drilling depth 125 mm Projection 280 mm Usable surface (pivoting) 420 x 340 mm Feed 0-300 mm / min stepless Table height with rack and pinion Machine dimensions (W x D x H) 520 x 820 x 1900 mm Motor three-phase 400 V pole changing bar 0.9 / 1.45 kW Weight 300 kg Including drilling package consisting: taper mandrel, Chuck, Vice and T - Groove set. Option: spindle stop and chip fracture module 690 EUR DELIVERY: free House including packaging NOT THE RIGHT MACHINE? WE DO ALSO OTHER AFLOAT PRODUCTS - ASK FOR A QUOTE! FLOTT BASE PARTNER .
bore capacity in steel (diameter): 65 mmthroat: 390 mmbore stroke: 250 mmspindle taper MT: 5 table-size: 880x670 mmspindle turning speed - stepless: 40-800 U/minweight of the machine ca.: 1.2 twww.marcels-maschinen.ch The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
ear-deep and speed display - digital thread cutter M20 (gradient-dependent) variable speed 125-4000 U/Mon in two stages, stage change of belt apportionment. Drilling capacity 525/30 mm of thread cutting capacity (depending on elevation) M20 spindle MK 3 drilling depth 125 mm projection of 280 mm-usable table surface (pivoting) 420 x 340 mm Feed rate of hand table height with rack machines dimensions (W x D x H) 520 x 820 x 1900 mm motor three-phase 400 V pole changing bar 0.9 / 1.45 kW weight 275 kg
bore capacity in steel (diameter): 32 mmthroat: 300 mmbore stroke: 160 mmmorse taper: 4 MKtable:: 460 x 460 mmturning speeds: 75 - 3200 U/minengine output: 1,5 kWcolumn diameter: 125 mmthread: M16 ST60feed: 0,10/0,18/0,26 mm/Udimensions: 800 x 500 x 2200 mmweight: 350 kg- automatic drill feeds (magnetic clutch)- Height adjustable and angle adjustable table- Movable work table- Integrated cooling system- Powerful engine- 3 hand levers for drilling feed- Safety shield with limit switch- Separate emergency stop- Built-in working lights- Incl. drill chuck 16mm - B16- Built-in automatic thread cutting.The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Duration / ALB ear power 30/35 mm thread cutting capacity Max M24 (Steigungsabhängig) hand-reversing switch for forward link. Undervoltage, thermal overload protection, spindle MK 3 drilling depth 180 mm throat depth 260 mm column diameter of 110 mm-usable table surface [BxL] 420 x 340 mm speed display scale drilling depth indicator scale drill depth stop with fine adjustment Table height with rack and pinion motor three-phase of 400 V pole changing bar 1,5/2 kW spindle speed continuously 125-2000 1 / min including drilling package consisting: taper mandrel, Chuck, Vice and T - Groove set. Warranty: 3 years delivery: immediately, free delivery loaded: free House including packaging not the right machine? WE DO ALSO OTHER AFLOAT PRODUCTS - ASK FOR A QUOTE! FLOTT BASE PARTNER .
bore capacity in steel (diameter): 60 mmthroat: 400 mmbore stroke: mmtotal power requirement: 4,4 kWweight of the machine ca.: 1,7 tdimensions of the machine ca.: mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Standard equipment: Drive: V-belt and gear unit combination Automatically elektomagnetischer spindle feed machined base plate with T-slots and coolant system integrated precise mechanical drilling depth setting automatic tool ejector Lighting Motor protection switch with tripping for U Emergency off pushbutton Drill protection with Electr. Hedging Rotary and swivel table Thread cutting device Gear lubrication through automatic oil pump Push button feed at the handle Stepless speed adjustment, frequency-controlled potentiometer and 3-way manual transmission for stage change Technical data: Drilling capacity 50 mm Thread cutting capacity (depending on elevation) M42 Spindle MK IV Depth 200 mm Throat depth 360 mm Column diameter 175 mm Usable surface (pivoting) 550 x 550 mm T - slot size number 3, distance 160 mm Dimension width 16/28 Digital speed display Dri ...
bore capacity in steel (diameter): 32 mmthroat: 320 mmbore stroke: 160 mmspindle taper MT: 4 MKtable:: 500 x 420 mmcolumn diameter: 120 mmturning speeds: 85 - 1800 U/minfeeds: 0,1 - 0,2 - 0,3 mm/Utotal power requirement: 0,85 / 1,5 kWweight of the machine ca.: 500 kg.range L-W-H: 965 x 515 x 1920 mmThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Dauerbohrleistung in St 60: 35 mm standard ALB ear power: 40 mm thread cutting performance: M 30 spindle: MK 4 feed adjustable: 20-400 mm / min drilling depth programmable: 175 mm projection: 300 mm spindle/table: 70-830 mm surface: 550 x 400 mm column diameter: 120 mm total height: 1,980 mm weight: 450 kg motor pole shift bar: 1.5 / 3.0 kW spindle speeds continuously variable range: 120-2,500 rpm spindle speeds stepless area B: 60-1,200 RPM
bore capacity in steel (diameter): 28 mmthroat: 300 mmbore stroke: 150 mmdistance spindle /table: 60-765 mmdistance spindle/base plate: 1.200 mmtaper MK: 3 threading: M20/M24 column diameter: 115 mmtable-size: 510 X 425 mmspindle turning speed - stepless: 60 - 1:400 U/mintotal power requirement: 1,4 kWweight of the machine ca.: 350 Kg.dimensions of the machine ca.: 1,9 x 0,6 x 0,9 m- Digital spindle speed display- Foot switch- Thread cutting device- Left-right rotation- 2-speed motorThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Dauerbohrleistung in St 60: 18 mm standard ALB ear performance: 20 mm thread cutting performance: M 12 spindle: MK 2 drilling depth: 100 mm projection: 225 mm from spindle/table: 55 up 880 mm table area: 450 x 315 mm column diameter: 90 mm overall height: 1,745 mm weight: 170 kg frequency-controlled three-phase motor: 1.5 kW spindle speeds continuously variable range: 100 - 2,000 rpm range: 200 - 4,000 min-1 digital display for speed as standard.
bore capacity in steel (diameter): 50 mmthroat: 350 mmbore stroke: 180 mmthread capacity: 35 Mspindle taper MT: 4 MKcolumn diameter: 150 mmbore spindle turning speed range: 132-1852 U/mintable-size: 480x480 mmThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Spindle: MK 3 Dauerbohrleistung: 25 mm standard ALB ear performance: 30 mm of thread cutting performance: M 20 depth: 125 mm projection: distance 260 mm spindle/table: 90 to 840 mm table surface: 500 x 365 mm column diameter: 110 mm overall height: 1,855 mm weight: 250 kg motor pole shift bar: 0.8/1.5 kW spindle speeds continuously variable range: 80 - 1440 min-1 range: 180 - 3,200 RPM digital display for speed as standard.
bore capacity in steel (diameter): 35 mmthroat: 300 mmbore stroke: 150 mmthread capacity: 27 Mspindle taper MT: 4 MKcolumn diameter: 125 mmbore spindle turning speed range: 100-2000 U/mintable-size: 420x400 mmThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Drilling capacity: 40 mm tool holder: MK 4 speed (spindle): 90-1455 K rpm projection: 320 mm drilling table swivel: +/-50° distance spindle to table maximum: 590 mm distance spindle to base plate: 1155 mm column diameter: 120 mm table size: 505 x 425 mm worktop base plate: 360 x 370 mm motor power: 1.0 / 1.5 kW machine dimensions (W x D x H): 500 x 930 x 1870 mm weight approx.: 450 kg Accessories: - Chuck Dorn MK 4 / B 18 - coolant system - digital speed display - keyless drill Chuck 1-16 mm / B 18 - reduction sleeve MK 4 / 3, MK 4 / 2, MK 3 / 1 - halogen lamp - automatic tool ejector - protective cover
bore capacity in steel (diameter): 40 mmthroat: 300 mmbore stroke: 160 mmthread capacity: 30 Mspindle taper MT: 4 MKcolumn diameter: 125 mmbore spindle turning speed range: 75-2100 U/mintable-size: 480x480 mmThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Drilling capacity in steel/GG: 50/60 mm spindle retainer: 5 MK projection: 400 mm table size: 700 x 600 mm Quill stroke: 275 mm spindle speeds: 32-1030 rpm feeds: 4: 0.1 ? 0.4 mm drive motor: 380 V, 2.2/3.7 kW space: 700 x 1200 x 2700 mm weight: 1240 kg
bore capacity in steel (diameter): 40 mmthroat: mmbore stroke: mmtotal power requirement: 4 kWweight of the machine ca.: tdimensions of the machine ca.: mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Drilling capacity in steel/GG: 23 mm spindle retainer: 2 MK projection: 300 mm table size: 300 x 300 mm Quill stroke: 100 mm spindle speeds: 190-1500 rpm drive motor: 380 V, 0.5/0.75 kW space: 410 x 670 x 1950 mm weight: 180 kg
bore capacity in steel (diameter): 40 mmthroat: 360 mmbore stroke: 200 mmthread capacity: 33 Mspindle taper MT: 4 MKcolumn diameter: 175 mmbore spindle turning speed range: 61-1169 U/mintable-size: 550x550 mmThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
bore capacity in steel (diameter): 70 mmthroat: 420 mmbore stroke: 260 mmthread capacity: 50 Mspindle taper MT: 5 MKcolumn diameter: 220 mmbore spindle turning speed range: 51-966 U/mintable-size: 600x600 mmThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
bore capacity in steel (diameter): 35 mmthroat: 300 mmbore stroke: 150 mmthread capacity: 27 Mspindle taper MT: 4 MKcolumn diameter: 125 mmbore spindle turning speed range: 100-2000 U/mintable-size: 480x480 mmThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
bore capacity in steel (diameter): 35 mmthroat: 300 mmbore stroke: 150 mmthread capacity: 27 Mspindle taper MT: 4 MKcolumn diameter: 125 mmbore spindle turning speed range: 132-1852 U/mintable-size: 420x400 mmThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
bore capacity in steel (diameter): 40 mmthroat: 300 mmbore stroke: 160 mmthread capacity: 30 Mspindle taper MT: 4 MKcolumn diameter: 125 mmbore spindle turning speed range: 75-2100 U/mintable-size: 480x480 mmThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
bore capacity in steel (diameter): 50 mmthroat: 385 mmbore stroke: 240 mmtable surface area: ø 500 mmspindle taper MT: 5 spindle turning speed range: 40 - 800 U/minfeeds: 0,1/0,14/0,2/0,28/0,4 mm/Ucolumn diameter: 220 mmdistance between table/spindle: max. 670 mmdistance spindle/base plate: 1180 mmtotal power requirement: 4 kWweight of the machine ca.: 1,4 tdimensions of machine L x W x H: 1,5 x 0,75 x 2,4 mAccessories: drill chuck, coolantThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
bore capacity in steel (diameter): 32 mmthroat: 320 mmbore stroke: 170 mm: 4 speeds: 60 - 1600 U/mintable-size: 570 x 480 mmtotal power requirement: 1,6 kWweight: 650 kgdimensions: 1200 x 800 x 2200 mmColumn drilling machine OPTIdrill DP 33V promotion set / 3020680SETWith an electronically controllable drive in a modern design Industrial engine Quiet running spindle thanks to new spindle design Machine operation with safety electronics in 24 V direct current Guaranteed concentricity = 0.02 mm in the measured drilling spindle Clockwise/counterclockwise rotation Precision spindle bore Control panel with user-friendly, dirt and water resistant Membrane keyboard RPM display Separate emergency stop button Tapping function Precisely crafted, stable drill table with diagonal T-slotswith all-round cooling water channel, can be tilted sideways by ±45° and rotated by 360° Drilling depth stop LE ...
bore capacity in steel (diameter): 23 mmthroat: 300 mmbore stroke: 150 mmtable-size: 300 x 410 mmspindle taper: MK 2 total power requirement: 1,4 kWweight of the machine ca.: ca. 315 kgdimensions of the machine ca.: ca. 700 x 900 x 1900 mmMachine has fallen over. A sheet metal cover and 2 levers of the cross lever broke off. Concentricity has been tested and is OK. Functional video available. Machine can be viewed and tested on site.The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
: 32 bore stroke: 125 mmShort spindle: MK 3 throat: 210 mmMachine table - usable table surface: 390x390 mmtable load: 65 kgspindle turning speed range: 105-2.650 UpMtotal power requirement: 0,75 kWOverall size: 750x450x1745 mmweight of the machine ca.: 192 kgThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
: 32 bore stroke: 125 mmShort spindle: MK 3 throat: 210 mmMachine table - usable table surface: 390x390 mmtable load: 65 kgspindle turning speed range: 150-2.500 UpMPower requirement: 16 Atotal power requirement: 1,5 kWOverall size: 750x450x1745 mmweight of the machine ca.: 187 kgThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
bore capacity in steel (diameter): 23 / 28 mmthroat: 260 mmbore stroke: 120 mmtool taper: MK 3 table-size: 500 x 350 mmcolumn diameter: 100 mmtotal power requirement: 1,3 kWweight of the machine ca.: 400 kgdimensions of the machine ca.: 800 x 600 x 1750 mmDefective feed!Right-left rotationstepless speed adjustment The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
: 23 thread capacity: M10 bore stroke: 90 mmShort spindle: MK2 throat: 180 mmMachine table - usable table surface: 285x285 mmtable load: 45 kgspindle turning speed range: 150-1.250/350-3.000 UpMtotal power requirement: 0,75 kWOverall size: 735x470x1080 mmweight of the machine ca.: 106 kgThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
: 20 bore stroke: 80 mmShort spindle: MK2 throat: 180 mmMachine table - usable table surface: 285x285 mmtable load: 45 kgspindle turning speed range: 210-2.500 UpMtotal power requirement: 0,38 kWOverall size: 620x470x1050 mmweight of the machine ca.: 80 kgThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Drilling capacity in St 60: 40 mmthreading in St 60: M 24 mmthreading in GG 20: M 30 bore stroke: 120 mmShort spindle: MK 3 throat: 293 mmcolumn diameter: 115 mmMachine table - usable table surface: 514 x 360 mmT-Slots Amount - Width - Distance: 2 x 14 x 224 mmDistance spindle - machine table min./max.: 117 / 701 mmfeed: 0,10 + 0,20 mm/Uspindle turning speed range: 160 - 2250 UpMtotal power requirement: 1,45 / 1,9 kWheight of the machine: 1840 mmweight of the machine ca.: 285 kgStandard equipment:- Mushroom pushbutton (latching) for EMERGENCY STOP- Reversing switch for right-left rotation- Motor protection switch- Speed adjustment stepless- Speed display digital- Feed overload protection- Protection IP 54- Connector (fully assembled, cable length 2 m)- Spindle protection with electrical protectionPos. 25Coolant device B, consisting of: separate container (33l),Pump with motor protection ...
