bag machines used for sale

Drawer fitting machine husband Type: XII LOD 2 oscillating abrasive belts Grinding wall surface 760 mm long x 280 mm high max. drawer width - fit width 1000 mm maximum drawer height 250 mm Width adjustment by handwheel Support tables on each grinding wall outside Support table size 650 mm x 235 mm Engine strengths 1 x 4.8 kW and 1 x 7.5 kW Dimensions 1900 mm x 1300 mm x H 1200 mm

Broken Ice Machine + Silo & Ice Truck Manufacturer: ZIEGRA Type ice cream maker: ZBE 350 EV 20°C Silo type: ITS 700 Specifications: 400V / 50Hz / max. 1.0A Year of manufacture: 2023 Total dimensions: H249 x W85 x D125 cm Coolant: R 744 Ice machine for connection to a CO2 refrigeration system or individual unit Machine design Completely stainless steel Surface ground Output approx. 350 kg / 24 hours at 20°C air & 15°C water Silo capacity: approx. 700 kg Compact design Designed for continuous operation - 24 hours - 7 days a week Height-adjustable machine feet Stock machine, immediately available! Function checked / machine is ready for use! Condition and accessories see original pictures!

Workpiece width max mm: 1700 Material thickness max mm: 100 02 Workbenches mm: 5000 x 1700 02 Oscillating aggregates Rollers (cotton) mm: 350 02 Roller motors HP: 18.5 Vacuum Table - HP 12.5

used industrial head machine King I-REX T4/3S-1/1-85/9 for sharing and circular action of Teigen. -4 in sequence -Industrial design -Stainless steel clad

ITALMEC TSR 300/1+6 wire drawing line was built in 2020 in Poland by EJP Italmec Sp. z o.o. The purpose of the line is to reduce the diameter of various types of wire, i.e. steel wire or welding wire, by pulling it through a series of rollers. This process is performed fully automatically, thanks to the use of two additional devices – a wire pay-off and a wire coiler. The wire drawing line consists of the following parts: 1. ITALMEC TSR 300/1+6 wire drawing machine 2. ITALMEC SB2C vertical static wire pay-off with compensator 3. ITALMEC AHSC 30 horizontal static wire coiler The ITALMEC wire pay-off with rotating arm precisely unwinds material from spools, coils or racks towards the drawing machine without stopping it. It is equipped with a special device that stops the machine in case of wire breakage and a compensator that accumulates the amount of wire necessary to stop the  ...

WWM TS 560/8-1 wire drawing machine was built in 2014 in Italy by WWM Technology Srl (now EJP Italmec Sp. z o.o.). The machine is used in the process of reducing the diameter of various types of wire by pulling it through a series of rollers. Once reduced to the appropriate diameter, the wire is confectioned directly onto a carousel or stand. The wire drawing line consists of the following machines: 1. WWM TS 560/8-1 wire drawing machine 2. WWM SV5 vertical static wire pay-off 3. WWM DSM 01 mechanical descaler 4. WWM AF 1000 wire coiler Wire feeding precision is ensured by the WWM wire pay-off, which consists of two tilting drums and a central column. It enables easy loading of material coils weighing a maximum of 3000 kg each, without stopping the drawing machine. During threading, the sheave and basket are lowered by a hoist with AC motor. The scale on the entire surface of t ...

Folding machine MBO T 800.1 6-6-4, year of construction 2005, pallet feeder, navigator control, 1. Folding unit 78/6 VN, 6 pockets, upstream and downstream knife shaft, 1 window rebate pocket for 1st or 2nd plant, gluing device HHS prepared, 2. Folding unit 78/6 VN, 6 pockets, upstream and downstream knife shaft, 3. 56/4 RFE folding unit, 4 pockets, sheet recirculation, noise insulation device, compressor, Blobreukrrks Sb Nwkeh 4. MBO SBAP 72 ME, mobile standing arch delivery, year of construction 2005, press rollers at call If you are interested, we will also be happy to inform you about other machines in our company. You are welcome to visit the machine in our house by prior appointment.

Technical data: Total length mm: 19800 Working width: mm 1000 Working length mm: 6600x1000 Pass-through height mm: 100 Polishing discs: Yes Polishing discs for edges: yes Diameter polishing discs mm: 200 Vacuum table: Yes

-Circular knife bread cutting machine -Cutting width 400mm -Note thickness adjustable -Built in 2015

Thomas 310E

Compact pretzel roll with croissant wrapper and feeding device Universum Kasper Model: LWT 3/80 Premium EB II W 20 for all spears such as Kornspitz and pretzel sticks, etc. Universal - Combi - Winding Machine for all doughs for wrapping and long rolls Longitudinal knit width 800 mm Cleaning device of the lower knitting plate Total effective path over 2 levels 2.5m Dough insert of 40 - 300 grams Stainless steel with EB2 feeding device pre-rolling mill for roll lines with transverse discharge only DGUV V3 tested by us Connection 400V, 16A-CEE plug Dimensions: 2200 x 1000 x 1800 mm, WxDxH Used machine overhauled 3 Months Warranty + Spare Parts Service Option: Mehler Service Package Maintenance contract Instruction & Commissioning We have more TOP winding machines in stock!

Special production plant of the brand Friulmac for the production of (standard) garden houses, wooden houses, log houses etc. System Block construction and block plank construction tools, milling and suction device. As good as new!

Kalmeijer pastry moulding machine KGM Table Model Pastry moulding machine Kalmeijer KGM with 10 plates and 2 moulding rollers. Pastry moulding machine is suitable for the production of mürbeteigen. With different moulding rollers, the pastry can be moulded into the desired (depending on the mould ingeu) roll. The dough feed and the moulding roller are neatly removable to clean them. The moulding roller can be heated by means of heating. Sheet metal feeder is automatic, the machine stops when there is no sheet metal on the trensport plate. Machine is compact and easy to use. Kalmeijer pastry moulding machine with 1 moulding rollers with 10 black baking sheets Table equipment with heating automatic sheet metal feeder thick of the dough figures is adjustable Dough hopper, moulding roller, dough feed roller is easily removable for cleaning Easy to use The trasnport beams for ...

Cone cutter and profiling machine First working area - OPENING TABLE WITH TRANSPORTBAND Length: 2600 mm, adjustable speed, inverter controlled. Second work area: PRODUCTION AREA Group of eight with movable longitudinal slide and cone cutter unit, numerically controlled. MULTIPLE CONE CUTTER UNIT: Motor with 7.5 HP, 3000 rpm, inverter-controlled, Spindle diameter: 50 mm, length: 270 mm WORKPIECE RETURN

Max. size= 65 x 36 cm, Availability= 062025, 4 bags flat pile feeder with noise insulation devices tape delivery LOT Loaded in truck or container

Krones Rotomat – Rotary Labeling Machine (Year 2011) Reliable rotary labeling machine designed for high-speed bottle labeling in beverage and liquid food production lines. The Krones Rotomat offers precise label application, robust construction, and continuous operation suitable for industrial bottling environments. General Information Manufacturer: Krones AG (Germany) - Model: Rotomat - Year of Manufacture: 2011 - Factory Number: K361180 - Condition: Good used condition, professionally removed and ready for integration Electrical Specifications - Rated Voltage: 400 / 230 V - Power Supply: 3-phase - Frequency: 50 Hz Machine Construction - Frame: Full stainless steel construction - Safety: Protective doors and enclosed machine frame - Operator Interface: Touchscreen HMI with Krones control panel Labeling System - Machine Type: Rotary labeling system - Possi ...

GEMA GP 100 semi-automatic pallet wrapping machine was built in 2012 in Poland by GEMA sp. z o. o. This highly efficient machine is an indispensable tool in various types of warehouses and logistics centres. This is because it makes it possible to wrap loads with a maximum weight of 1500 kg in stretch film, increasing their safety and stability during transport. The process is performed by the machine semi-automatically. The GEMA pallet wrapping machine weighs 500 kg. We have two of these machines for sale. The price included in this advertisement is for one unit. Technical specifications of the GEMA GP 100 stretch wrapping machine - maximum wrapping height: 2200 mm - maximum load diagonal: 1650 mm - maximum load weight: 1500 kg - maximum film roll diameter: 270 mm - film thickness: 7-30 μm - rotary table height: 70 mm - rotary table positioning accuracy (with 1000 kg load) ...

Rotary board cutter & creaser & half cutting Krause Model J138-LV/80 Year 1980's Creasing length 1300 mm 1st "station" 6 sets of half cutting tools 2nd "station" 7 sets of creasing tools to make a W shape 3rd "station" 7 sets of circular knives Table with side alignment & with push system Speed controlled by means of a spead pulley

For sale Log Reducing Machine BRUKS RR800 – completely overhauled On offer is a fully refurbished BRUKS RR800 buttflare reducing machine for processing round timber. The machine has been overhauled and is ready for immediate use. It is ideal for use in sawmills, biomass plants or for pre-processing trunk wood with strong root shaping. Specifications Model BRUKS RR800 Maximum trunk diameter 700 mm measured at 1500 mm distance from the end of the trunk Minimum trunk length 3.2 m Maximum trunk length 6.2 m Maximum reduction 200 mm Capacity at feed rate 60 m per minute approx. 4 logs per minute at 60 cm diameter Capacity at feed rate 30 m per minute approx. 3 logs per minute at 60 cm diameter Number of cutting tools 30 pieces Tool width 60 mm Cutting motor 37 kW Chain drive via geared motor 2.2 kW Hydraulic power unit 5.5 kW Total weight including main drive approx. 500 ...

For sale Log Reducing Machine BRUKS RR800 – completely overhauled On offer is a fully refurbished BRUKS RR800 buttflare reducing machine for processing round timber. The machine has been overhauled and is ready for immediate use. It is ideal for use in sawmills, biomass plants or for pre-processing trunk wood with strong root shaping. Specifications Model BRUKS RR800 Maximum trunk diameter 700 mm measured at 1500 mm distance from the end of the trunk Minimum trunk length 3.2 m Maximum trunk length 6.2 m Maximum reduction 200 mm Capacity at feed rate 60 m per minute approx. 4 logs per minute at 60 cm diameter Capacity at feed rate 30 m per minute approx. 3 logs per minute at 60 cm diameter Number of cutting tools 30 pieces Tool width 60 mm Cutting motor 37 kW Chain drive via geared motor 2.2 kW Hydraulic power unit 5.5 kW Total weight including main drive approx. 500 ...

Strapping machine SMB SM1-600; good condition; cleaned and tested; Frame size 600x600mm; Bandwidth 5mm; Core diameter 200mm; Power max.42 Strappings/min.; suitable for PP-band 5mm DIN 55535; Stand-up device; Footswitch. Strapping machine SMB SM1-600; good condition; cleaned and checked; frame size 600x600mm; band width 5mm; core diameter 200mm; speed up to 42 straps/min.; used for PP-band DIN55535; floor mounted machine; foot switch.

BRUKS RR 300 Root Reducer Core: - Processed wood lengths: 2.5 to 14 m (with extension part from 6 m) - Maximum trunk thickness: 900 mm (1,200 mm at root ends) - Fully automatic cross pass with integrated log ejector - Intelligent milling technology: adaptation to natural trunk shape (maintains curvature) - Flexible loading by crane/forklift + radio remote control (on request!) - Robust construction: Heavy rectangular tube frame + side hold-down arm Specifications: Reduction time per log: Ø 30 cm: 29 seconds Ø 60 cm: 37 seconds Milling unit: 45 kW motor (1,500 rpm) 36 milling blades (60 mm width, can be used on 4 sides) Drive system: 2 lower rotation chains with carriers Trunk rotary motor: 2.2 kW (8 m/min) Hydraulics: 5.5 kW / 28 l/min Weight: 4,000 kg (basic machine) + 1,000 kg (extension) Scope of delivery: - Factory tested and adjusted (incl. hydraulic  ...

20-09-510 Edge Banding Machine WOODLAND MACHINERY (new) Type GB/T10850 Engine power 0.18 kW Air Pressure 3-6 Bar Voltage 220 V 50 Hz Total Power 1.4 kW Heating Capacity 1.2 kW Edge width 8-50 mm Edge thickness 0.3-3 mm Feed speed 0-26 cm/s Vacuum workpiece Attraction Transport Dimensions Weight 300 kg

Many thanks for your interest in our machinery, please find below our offer: manufacturer: Walther Trowal Type: polishing machine TT25-E / grinding machine - finisher year: 1989 Volume ca. 25 Liter Speed: ca. 250 U/min electrical: 400 V / 50 Hz, 1,5kw different: - Tops made from polyurethane - Polishing / ball mill / grinding machine - Fresh water and wastewater connection - The machine is mechanically complete. reconditioned, sandblasted and repainted, see pictures - The PU parts have not been replaced Surface grinding system / grinding system for polishing, rounding, deburring, grinding, cleaning, descaling, oil removal, polishing of stamped, cast, formed, forged and sawed parts or machined workpieces, sensitive parts such as jewelry, steel, plastics etc. or massive large parts. We offer this machine in checked/cleaned/painted” condition, without warran ...

20-90-542 Multeosill Drilling Machine WOODLAND MACHINERY (new) Type: BM21S Number of shafts 21 Adjustable drilling angle Working width 700 mm Table Dimensions 1000 × 900 mm Additional support Ruler 3000 mm Number of Pressers 2 Engine power 1.5 kW 380 V 50 Hz Required Air Pressure 8 bar Drilling Step 32 mm Weight 150 kg Transport Dimensions 1200x1000x1300 mm

ZM punch grinder

max width: 1000 mm

Specifications: Manufacturer: Weisser Type: Univertor AM-1L Year of Make: 2020 Control: CNC control Siemens SINUMERIK 840D sl Travels: X 1,700 mm Z 500 mm Spindle unit left side of the machine Speed Limit| 3,500 rpm Rated speed: 780 rpm Torque: 430/610 Nm (100/40% ED) Spindle bearing Ø: 120 mm Spindle flange: A8 according to DIN 55026 Dressing unit Max. speed: 16,000 rpm Dressing disc holder Ø: 40 x 10 mm Revolver Target turret: 12-speed Drive: electric swivel drive Internal grinding spindle with grinding software Tool holder: D28/43 (thread M28x2) Spindle bearing Ø: 45 mm in hybrid version Speed limit: 45,000 rpm. Rated speed: 30,000 rpm Drive power: 15/18 kw (100/60 % ED) Torque| 4.7/5.7 Nm (100/60% DC) External grinding spindle with grinding software Tool holder taper: 1:10; Ø 73 mm Spindle bearing Ø: 80 mm in hybrid version Speed limit: 6,00 ...

The machine is in good technical condition, a test run is possible by prior arrangement. Hours: 8,981 Upper driven tool turrets with Y-axis, lower driven turret, double slide with two spindles. Control: FANUC 31i-B. Max. circumferential diameter above the bed: 300 mm Max. circumferential diameter over the support: 230 mm Max. turning diameter above the bed with upper turret: 230 mm Max. turning diameter above the bed with lower turret: 230 mm Max. turning length: 600 mm Max. distance between the ends of the right and left spindle: 980 mm Milling area outside the axis of rotation due to Y-axis: 100 mm (+/- 50 mm) Max. rod diameter (left spindle): 65 mm Max. rod diameter (right spindle): 65 mm Max. permissible workpiece weight without sub-spindle (incl. chuck weight = 23 kg): 12 kg Total weight: 7,800 kg Accessories: SS 2500 bar feeder, length 200–1 ...

20-27-518 Reismusas WOODLAND MACHINERY (new) Type MOTO530 Max. Working width 530 mm Max. Working height 300 mm Max. Cutting depth 8 mm Engine 4kW/380V/50Hz Dimensions of the Working table 1050x532 mm Spindle rotation speed 4800 rpm Min. Working length 280 mm Knives 4-30x530x3 Electrical filing 0.5 kW Electric height adjustment 0.33 kW Feed speed 5-20 m/min Transport Dimensions Weight 835 kg

The machine is in good technical condition, a test run is possible by prior arrangement. (spindle 32 mm) + Mitsubishi E60 control. Bar feeder included – for bars up to 3000 mm! Max. turning diameter: 60 mm Max. turning length: 120 mm Circulation diameter over cross slide: 120 mm X-axis: 170 mm Z-axis: 170 mm Spindle bore: 34 mm Max. bar diameter when using the loader: 32 mm Spindle holder: diameter 85 mm Spindle motor: 3.7 kW Spindle speed: 100–5,000 rpm Rapid traverse (X and Z axis): 15 m/min Min. program input: 0.001 mm Max. tool diameter: 16 mm Machine dimensions (L x W x H): 1200 x 1000 x 1500 mm

20-29-558 Grinding Machine for WOODLAND MACHINERY (new) Available in installments Type SD W4 Max. Working width 200 mm Max. Working thickness 150 mm Min. Working length 450 mm Feed speed 3-25 m/min Right and left grinding shaft size 300x150 mm Feed motor 380V 50HZ 0.25 KW 1430r/min Grinding Head motor 380V 50HZ 1.5 KW 1430r/min Power 6.75 kW Transport Dimensions 2400x1800x1300 mm Weight 450 kg

ERMAK RPP 1270X30 punching machine was built in 2013 in Turkey by ERMAKSAN MAKINA SANAYI VE TIC. AŞ. The machine, which is distinguished by its high productivity and precision, is used in the machining of thin sheet metal with a maximum thickness of 6.35 mm. All machining processes are performed on a large brush table by a reliable working head, which operates with a maximum force of 30 tonnes. The brush table prevents scratches and nicks on the sheet metal surface during material feed, and also significantly reduces noise level. All this is complemented by a FANUC CNC control with an intuitive interface that allows advanced machining programmes to be created in just a few steps. The ERMAK RPP 12730 CNC punching machine weighs 11000 kg. It is also possible to purchase Metalix CAD/CAM software at an additional cost of 10500 EUR net. Technical specifications of the ERMAK RPP 1270X30 ...

The machine is in good technical condition, an inspection by prior arrangement is possible. Max. turning diameter: 465 mm Max. circumferential diameter: 680 mm Max. rotation diameter via cross slide: 465 mm Max. width of the cross-section: 315 mm Travel in X/Z: 300/1050 mm 315mm 3-Jaw Hydraulic Chuck Max. spindle speed: 3250 rpm Spindle bore: 76 mm Spindle drive power (40%/100% ED): 33/22 kW Max. spindle torque (40%/100% ED): 630/420 Nm Max. speed driven tools: 4000 rpm Programmable tailstock, tool measurement, chip conveyor S/No. 8045000336E (2011) Installed power: 50 kVA Power supply: 400 V; 50/60 Hz Dimensions (L x W x H): 5250 x 2300 x 2000 mm Machine weight: 8000 kg

USED TROMMEL FOR DOPPSTADT, KOMPTECH, TERRA SELECT AND SEKO IN READY DELIVERY: FOR T4 / T40: 15 mm SQUARE HOLE 6 mm THICKNESS (NEW and USED) 25 mm SQUARE HOLE 8 mm THICKNESS (NEW and USED) 30 mm SQUARE HOLE 8 mm THICKNESS (NEW) 35 mm SQUARE HOLE 8 mm THICKNESS (NEW) 40 mm SQUARE HOLE 8 mm THICKNESS (NEW) 50 mm SQUARE HOLE 8 mm THICKNESS (NEW) 80 mm CIRCLE HOLE 8 mm THICKNESS (NEW) 130 mm CIRCLE HOLE 8 mm THICKNESS (NEW) FOR T45/ T50: 10 mm SQUARE HOLE 6 mm THICKNESS (USED) 15 mm SQUARE HOLE 6 mm THICKNESS (NEW) 20 mm SQUARE HOLE 6 mm THICKNESS (NEW) 40 mm SQUARE HOLE 8 mm THICKNESS (NEW and USED) FOR SM 518 DOPPSTADT: 10 mm SQUARE HOLE 6 mm THICKNESS (NEW) 15 mm SQUARE HOLE 6 mm THICKNESS (NEW) 20 mm SQUARE HOLE 6 mm THICKNESS (USED) 25 mm SQUARE HOLE 6 mm THICKNESS (NEW) 30 mm SQUARE HOLE 8 mm THICKNESS (NEW) 40 mm SQUARE HOLE 8 mm THICKNESS (NEW) 50 m ...

- Folding stations: 1st folding unit with 6 pockets (parallel folding) - Folding stations: 2nd folding unit with 4 pockets (parallel fold) - Folding stations: 3rd folding unit with 2 pockets (parallel folding) - Max. sheet format: 520 x 840 mm - Min. sheet format: 105 x 148 mm - Max. speed: up to 30,000 sheets/hour (depending on folding pattern and material) - Paper weight: 40 – 250 g/m² - Fold types: single fold, wrap fold, zigzag fold, double parallel fold and much more - Feeder: Flat pile feeder (PBA) - Control: Electronic control with folding program memory - Delivery: Shed delivery (STA) - Optional: Perforating, creasing or cutting units (depending on equipment) - Format adjustment: Manual - Machine dimensions (L x W x H): approx. 2,800 x 1,200 x 1,400 mm - Weight: approx. 1,000 – 1,200 kg Particularities: - Solid construction with high precision - Suitable for ...

1 Qty. 1 Second-hand 3 roll bending machine Mfc.: SW GmbH Type: SRMV G Built: 1989 Strip width max.: 2000 mm Wall thickness: max. 25 mm / Ø 530 mm 2 Qty. 1 Second-hand 3 roll bending machine Mfc.: SW GmbH Type: SRMV Hy Built: 1981 Strip width: max. 3500 mm Wall thickness: max. 12 mm 3 Qty. Second-hand 3 roll bending machine Mfc.: SW GmbH Type: SRMV Hy Built: 1983 Strip width: max. 3500 mm Wall thickness: max. 19 mm 4 Qty. 1 Second-hand 4 roll bending machine Mfc.: SW GmbH Type: SVRM Built: 1981 Strip width: max. 2000 mm Wall thickness: max. 16 mm

PET Preform injection moulding machine Clamping force 320t Spray weight 6935gr. Snail 130mm Preform extraction system SERVO IV, TPS robot TRT-M4-72-E, 72-speed, 4-stage, incl. withdrawal kit, conveyor belt LT/h 1825, dosing Motan Minicolor PET

Key data: 250 mm, 550 mm, 145 mm

Demonstration article Condition: Mint The Superturn 550/125 Vario with MFB 16 Vario offers modern turning, milling and drilling technology for the central machining of small to medium-sized workpieces - a practical all-rounder for mechanics and model makers, vocational schools and training workshops. The basic component SUPERTURN 550/125 Vario is a lead screw lathe with an infinitely adjustable speed control and a digital speed display. The maximum turning size above the carriage is Ø 145 x 550 mm, the spindle bore diameter is 26 mm. Standard equipment: - Digital speed display - Three-jaw lathe chuck ø 125 mm, centr. - Centrifuge MK 4 - Grain tip MK 2 - Emergency stop button / zero-voltage trigger - Lathe chuck protection with safety limit switch - Chip tray / bulkhead - Toolbox / Instruction Manual / CE Specifications: Center width 550 mm Tip height 125 mm  ...

Universal tool milling machine, used universal milling machine, used Type FU 315 - V/2 Fabr. WMW Heckert Built: 1979 Table size/ table: 1250 x 315 mm Laengsmotion/ longit. move: X: 850 mm Horizontal movement/ horiz. Move: Y: 270 mm Vertical movement/ Vert. move : Z 355 mm Tool holder/taper: ISO 50 Spindle speeds R+L infinitely/ speeds of spindle ( left/right) 28 - 1400 rpm. Pre-shot stepless all axes X, Y and Z/ feeds all axis 10 - 630 mm/min / 250 mm/min Drive power/ load 3.8 kW Weight: 2 t

For sale is a laser cutting machine TruLaser 3530. technical data: Additional details - Operating hours: Beam-On 2030 h/Laser-On 9814 h - X travel distance 3000 mm (max. 3104) - Y travel distance 1500 mm (max. 1580) - Xp travel 300 mm (max. 305 mm) - Z-travel distance 114 mm - maximum material thickness 20 mm - maintenance-free three-phase motors in X1, X2, Xp, Y1, Y2 and Z axes - maximum positioning speed axle parallel 120 m/min - Simultaneous 170 mm/min. - Acceleration when positioning X-axis 9 m/second - Xp + Y axis 15 m/second - Cutting X-axis 4 m/second - Cutting Xp and Y axis 15 m/sec. Standard - Closed machine frame with integrated laser resonator - Movement unit for optimal processing speeds - Additional highly dynamic Xp axis - Automatic pallet changer - Closed beam guide - NitroLine, high-pressure cutting - FocusLine, constant focus position - Comp ...

Saw milling Weibert FR3 new â?¢ Format sliding table 2000mm â?¢ Cutting height: 103mm â?¢ Boom table cpl. â?¢ Saw blade: swivel, max.315mm â?¢ 3KW motors (4KW) 400V 50HZ â?¢ Mill: rigid 90° â?¢ Milling rpm: speeds: 1500/3500/6000/8000 rpm. â?¢ Safety railmilling stop 500mm â?¢ Right- and left-hand-running milling â?¢ WJ-400100W7 Accessories: Driving equipment

Demonstration article Condition: Mint Specifications: Drilling capacity in steel 50 mm Milling capacity face milling cutter 125 mm Milling capacity end mill 40 mm Spindle holder (turning spindle) ISO 40 Speed range 40 - 2000 rpm Speed levels infinitely variable Quill stroke 65 mm Milling table grooves / width x spacing 5 / 14 x 63 mm Verical table grooves / width x spacing 3 / 14 x 63 mm Spindle projection 180 - 485 mm Table load capacity 160 kg Milling head swivel range ± 45 ° Quill spacing table 50 - 450 mm Horizontal spindle distance table 145 - 545 mm Milling table area 750x320 mm Table path X x Z 405 x 305 mm Vertical table surface 890 x 225 mm Feeds X/Y/Z 10 - 1000 mm/min Feed stages X/Y/Z infinitely variable Motor power 3700 W Torque X-axis 7.7 Nm Y-Axis Torque: 7.7 Nm Torque Z-axis 1.7 Nm Mains connection 400/50 V/Hz Cubature 750x320x450 mm Len ...

Rye bread divider. Weight range per piece: 0,4-1,2 kg; Capacity: 10-30 pcs/min ; Large hopper for 300 L; With 3000 mm conveyor and tin sensor; The divider is new. Client refused because of small amounts of dough.

AUTOMATIC SPINNING LATHE DENN RPE-290 Denn Mod.RPE-290 Automatic Spinning Lathe- Spindle Speeds 615/1060/1825 RPM. More information on request.

Key data: 40 mm

Demonstration article Condition: Used Premium quality MADE IN SWEDEN The gearbox is built with the traditional and tested technology for the highest possible torque. Helical gears in combination with steel against reinforced fiber material provide a high degree of efficiency, a low noise level, as well as a long service life and an almost maintenance-free transmission. Specifications: Drilling capacity in steel: 40 mm Threading capacity M28 Spindle holder (turning spindle) MK 4 Speed range 90 - 1500 rpm Speed levels 8 Quill stroke 190 mm Quill feed stages 4 Column diameter 140 mm Quill feed 0.10/0.16/0.24/0.33 mm/rev T-slots, width M14 mm Drilling table stroke 830 mm Spindle projection 330 mm Drilling table rotatable ± 360° Quill spacing base 1210 mm Quill spacing table 215 - 830 mm Drilling table area 500x400 mm Motor power (2-stage) 2200 / 2600 W M ...

The Vax Commercial VCSD-05 is a battery-powered floor mopping machine with a capacity of 75 liters. The two 400 W brushed motors are powered by two 12 V batteries with an output of 76 ah/h. The batteries have a capacity of 3 hours, the charging time is 8 hours. The VCSD-05 is a compact floor mopping machine with a cleaning width of 660 mm. Brushes are available as a matching VCSD-05 floor brush or as a floor pad in conjunction with a VCSD-05 driver board. Due to its compact dimensions, this floor mopping machine can also be easily transported to different floors by elevator. Used cleaning machines from Heratec are all tested for functionality, cleaned and, if necessary, overhauled. Specifications: Manufacturer: Vax Type: Commercial VCSD-05 Condition: used/good Motor (Suction:) 400 W Motor (brush): 2x 400 W Capacity wet: 75 liters Capacity extraction: 80 liters Chargin ...

Capacity, ton 800 Movable die stroke, mm 180 Max. upsetting ram stroke, mm 380 Upsetting ram workstore, mm 250 Upsetting ram return stroke with closed dies, mm 130 Distance bentween upsetting ram and dies stroke forward, mm 140 Number of ram strokes per minute 35 Die dimensions, mm 590 x 220 x 660 Electric motor power, kW 40 Dimensions: mm 6300 x 3900 x 2850 Weight: kg app. 80800

The used cleaning machines are all checked for functionality, cleaned and, if necessary, overhauled. Technical details: Manufacturer: Kärcher Model: BR 530 BAT, battery-powered Year of construction: 1998-2006! subject to availability Condition: very good Nominal voltage 24 V Battery capacity 75 Ah (5h) Power consumption 1200 W (1560) Suction motor power 500 W Brush motor power 600 W Suction power, air volume 30 litres/second Suction power, vacuum 140 mbar Cleaning brush working width mm 460 diameter mm 96 Brush speed 1500 rpm Theoretical area performance 1840 m²/h Volume fresh/dirty water tank 40/40 litres Total weight 150 kg Sound pressure level (EN 60704-1) 70 dB Total vibration (ISO 5349) 0.4 m/s² Built in 1998-2006! subject to availability Additional support wheels on the suction beam and at the front. We would like to point out that with regard to the  ...

Machine info: Year of construction: 02/2025 Capacity: 60kg Machine Weight: 360kg Production of tempered chocolate: 130kg/h Connection: 16A CEE plug Dimensions: Width 900mm, Depth 920mm, Height 1550mm Description: The Model MAESTRIA60 tempering and coating machine is designed for tempering and coating all types of chocolate. Thanks to its small dimensions, the tempering and enrobing machine is MAESTRIA60 particularly suitable for versatile use in confined spaces. Continuous temperature control by a screw with the help of a cooling unit ensures that the chocolate is always available at the right temperature, ready for use. The machine has a heated dosing device, which is controlled by a pneumatic three-way valve, so bars, chocolates and other products can be dosed directly into moulds. By equipping the machine with the appropriate coating attachment, all confectioner ...