We use cookies to optimize our website for you and to be able to continuously improve it. By continuing to browse the site you are agreeing to our use of cookies.
Disagree
subcategories
(3rd category level)
Manufacturer:
(Category: 202)
used
Swivel spindle milling machine SCM Samco Type T 40 I Machine No. KK/038438 Year of construction 1997 Includes 3 rollers of feed Includes table extension Swivel cutter head included Spindle diameter 30 mm Spindle swivel 90° - 45° Motor power 3 kW Engine Brake Spindle left clockwise Table size 870 mm x 560 mm Spindle clamping length 135 mm Maximum tool diameter 180 mm Suction nozzle diameter 120 mm Speed 1400/3500/6000/8000 rpm. Weight with feed approx. 250 kg
used
used
Combined Saw / Milling Machine / Slotted Hole Drilling Machine Make Hombak With 3 rollers of feed wood Table milling machine with 30 and 40 mm spindle Swivel saw table Saw table with width stop Motor power approx. 3 kW
used
used
Profile milling machine Bäuerle - Cross section milling machine Type: PM 510 Machine No. 126/91 Year of construction: 1991 Table size 1250 x 410 mm Tool span 510 mm Tool flight circle diameter max. 250 mm Milling height max. 250 mm Milling depth 65 mm Milling spindle diameter 40 mm Table height 870 mm Motor power 18.5 kW, 380 V, 50 Hz, 35 Amp. Working cycles per minute max. 6 Operating pressure max. 6 bar Air consumption 140 l/min. Feed speed 0 – 4.5 m/min. Revolutions per minute at flight circle diameter 180 mm 6000 rpm Revolutions per minute at flight circle diameter 200 mm 4800 rpm Suction nozzle diameter 160 mm with 16 mini tine milling cutters 15 mm cutter width on 500 mm total width with instruction manual Weight: 780 kg Machine dimensions L 1250 mm x W 1270 mm x H 1600 mm
used
used
Vacuum pump Becker Type VT 3.40 Machine No. D1180485 Built in 1991 Speed 1420 rpm. Suction volume 40 m³/h Suction pressure -900 mbar Motor power 1.25/1.5 kW
used
used
Planer for round bars solver with magazine Type: VF 120 Year of construction: 1987 max. workpiece thickness 120 mm with 2 planer heads and 2 knives each (4 knives in total) in the machine and 2 spare planer heads and 2 knives each (4 knives in total) for round bars in 8 mm Feed speed 5-25 m/min. incl. slide-in magazine solver suitable for the production of dowel rods, round and profile rods
used
Including tools.
used
Double-end tenoner Torwegge Working width 3000 mm per side: 2 x shredders swivel 3.7 kW at 50 Hz/5.5 kW at 100 Hz complete with converter Chain transport with cams
used
Voltage: 230V, weight: 230kg.
used
Carousel milling machine self-made Table diameter 550 mm 1 milling arm with soundproofing cabin
used
There is a milling line for lock and hinge available, line includes (1) lock and hinge milling machine, with top/ bottom handle hole unit, lock case milling and drilling machine (2) shifting and aligning unit (3) hinge machine with right and left turning miller and drilling aggregates, max. work piece dimensions: 3000x1350x72mm, speed: 50s/workpiece, length: 13,505mm, width: 4456mm, including documentation, available in March 2023.
used
Table milling cutter cutter with sliding table Type SK 2/4 Table size 1040 mm x 900 mm 2 table inserts diameter 440 mm and 120 mm Spindle diameter 30 mm Spindle length 125 mm Revolutions 3000/4000/5000/6000/8000/10,000/rpm. Motor power approx. 5.5 kW With 3 rollers of feed wood-made Sliding table table surface 770 mm x 400 mm Sliding distance 1200 mm Weight approx. 700 kg
used
Connected load 5 / 5.5hp.
used
Sculptor copy milling machine Brand Reichenbacher Type R632 / 40 Machine number: 2068 2 80 Milling of wooden figures e.B. nativity figures etc. with copy pen. Also to be used as a copy car carving machine. Machine is to be operated manually. 6 workpieces can be machined simultaneously. Clamping length maximum 1050 mm Workpiece diameter maximum 300 mm If each spindle is used, maximum workpiece diameter 150 mm Milling motor motor power 0.5 kW each Dimensions 3700 mm x 2200 mm x H approx. 1500 mm The machine is in stock with us, but still needs to be assembled and tested.
used
X-travel: 3680mm, y-travel: 2040mm, z-travel: 1000mm, number of drilling spindles: 9, number of tool slots: 32, weight: 6.5t, operational hours counter: ca. 33,000h, the machine is slightly damaged.
used
Double end tenoner Schwabedissen Type: DAa 200 Working width 1000 mm 3 motors per side: Saw 8.3 kW swivel Milling machine 4.5 kW swivel Milling machine 4.5 kW swivel Chain track with cam spacing 380 mm Lower chain projection 500 mm External dimensions 3600 mm x 2340 mm
used
Spindle length: 130mm, spindle movement: 125mm, spindle diameter: 30mm. Max. Tool diameter: 260mm, max. speed: 10000rpm, speed levels: 9, controlled axes: 3, table length: 2700mm. Operating hours: 721h, setting hours 665h, total hours: 1388h. Including accessories on the picture.
used
Turning machine Tip height 160 mm Tip width 1000 mm 3 speeds Flat disc diameter 190 mm Beitel auflage Power connection 380 volts Dimensions 1460 mm x 900 mm x H 1100 mm
used
Verticale drilling unit, 3 spindles suitable for IMA - incompatible with a Weeke plug
used
Chain cutter Haffner Type KF 20 Machine No. 16809 With door rest Engine strength 1.7 kW Weight 100 kg Dimensions 900 mm x 800 mm x H 1950 mm
used
CNC frame processing machine Brand: COMEC DRIVER New machine - With this machine you can process assembled door frames in quantity-1, door by door. - 5-axis machining spindle with ingenious crosshead technology for fastest tool use and productivity. Automatische Positionierung der Auflagensupporte. - High-precision and program-controlled clamping system with O-reference on the surface. - Laser measurement of the surface contours for precisely fitting milled fittings. - Automatic discharge of the finished frame parts. - Possibility of connection to known door software systems. - The machine can be individually designed to meet your required machining needs. Give us your requirements and let us offer you your MD JAMB suitable. - This offer is valid for Germany. Wehrmann is the exclusive sales and service partner for COMEC in Germany.
used
Dowel wreaths for dowel cut-out and chamfing machine solver type AA 220 available for the following dowel diameters: Ø 5mm = 3 pieces Ø 6mm = 6 pieces Ø 8mm = 6 pieces Ø 10mm = 6 pieces Ø 11mm = 3 pieces Ø 12mm = 4 pieces Total 28 pieces. Especially for the wreaths for 6 and 8 mm dowels, special designs are included, for dowels 6x20 or 8x25.
used
Underfloor drilling unit suitable for IMA - incompatible with a Weeke plug
used
Chain milling machine VEB Type KFM Motor power 2.2 kW Table tiltable 30° -0°- 30°, height adjustable, adjustable to left-right Pressure from the front Sword 50 x 150 for chain 12 – 17 mm Dimensions 1100 mm x 1000 mm x H 1620 mm Weight with pallet 511 kg
used
Adaptation unit with drill chuck for verticale drillings with 1 spindle Price per unit 2 Units available suitable for IMA - incompatible with a Weeke plug
used
Fezer chain milling machine Motor power 1.5 kW With door support Weight approx. 150 kg
used
Angular milling unit suitable for IMA - incompatible with a Weeke plug