Winkelanlage Schneider Type: SK-Z3 Milling spindle Diameter 30 mm; motor with 4.8/5.6 kW and 1450/2900 rpm Spindle clamping length 150 mm Tool diameter maximum 200 mm Table size 1150 x 850 mm Extendable table support length 2000 mm Slotted spindle Diameter 40 mm; motor with 4.6 kW and 2830 rpm Spindle clamping length 130 mm Cross-cut saw with carbide-tipped saw blade; Motor 3 kW and 2860 rpm Tenon table Dimensions 780 mm x 330 mm With stop rail, with pneumatic workpiece holder Travel 2000 mm 3 suction connections 1 milling fence with fine adjustment, DBGM SH-System 90/1 from S. Hoomann GmbH with 3-roller feed Dimensions Dimensions 3100 mm x 2000 mm x H 1500 mm Weight 1200 kg Packing Dimension 1 pallet 2000 mm x 2200 mm x H 1500 mm Weight approx. 1000 kg 1 pallet 1200 mm x 800 mm H 1000 mm Weight approx. 200 kg
Tenon cutting and slitting machine Hemag With automatic table feed Type: ZR 351 -Cross-cut saw motor power 2.2 kW Saw blade diameter 420 mm Cutting height maximum 120 mm -Slotted spindle motor power approx. 4 kW Spindle diameter 40 mm, spindle clamping length 180 mm Tool diameter maximum 350 mm Sliding carriage with automatic feed motor 1 kW max. tenon length 145 mm max. slot depth 145 mm max. wood thickness 200 mm max. wood width 400 mm Machine dimensions: L 2200 mm x W 2300 mm x H 1800 mm Weight: 1850 kg
500 € add to watchlist
Condition: unchecked Item is sold as is Weight may be ggbfs. Deviate. Machine must be dismantled by the buyer and transported out of the hall area. It cannot be guaranteed that a forklift is on site. Auction-ID: A1-46354-41
Verboom PN5 Left Brand: Verboom Type: PN5 Left Year of construction: Standard: EU conformity (SHA tested) Machine Data: Saw: 2.2 KW positioned over the product Spigot heads: 2 2.2.kW, handwheel adjustable spigot heads positioned on top of each other and positioned by means of Siko analog-digital readout. 1e Vertical spindle: 5.5 kW direct drive spindle: 20040 mm and position with manual positioning and analog-digital readout. 2e Vertical spindle: 4.0 kW direct drive spindle: 120mm and position with manual positioning and analog-digital readout. Table: Manuel, with clamping Extendable length stop Stroke can also be used as miter stroke Dimensions: 3.5(0.9+0.9)1.6m
Dimensions (L/W/H): 1760x1150x1320 mmWeight: 1100 kgTotal power requirement: 4,5 kwThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Tenon milling machine / tenon cutting and slitting machine Manufacturer: Kölle Model: Z40 Year of construction: 1992 1 x Sawing 1 x Milling
Lenght of tenon: 0 mmThickness of tenon: 0 mmDepth of tenon: 0 mmThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
I am selling an Automatic CNC Machining Center for BLOCK-HOUSE production AUER BL100. Built in 2001. Entrance table / max. element length 9.00m Trunnion cutter up to dia.200mm / 4kW Horizontal milling machine up to dia.200mm / 4kW Vertical milling machine up to dia.200mm / 4kW Automatic feed system AUER Austria BL100MS Programming Zebra Label Print TOS Svitavy PWM 45.11 End-cut Saw Rear Favorable for timber constructions! Available soon.
Verboom tenon milling machine Brand: Verboom Type: PN 5 LINKS Standard: BHG / SHA adapted according to the currently valid regulations Labour legislation applicable within the EU Machine data: Pinon milling machine with 5 processing units (1 saw + 4 milling machines) 1. Saw unit positioned over the workpiece, 4.0 kW, ø400 mm 2 tenon milling unit over the workpiece with 2.2 kW 3. Pinon milling unit below the workpiece with 2.2 kW 4. Vertical milling spindle (slot milling unit) with ø40 spindle and 200 mm Clamping length, 4.0 kW direct drive 5. Vertical milling spindle (slot milling unit) with ø40 spindle and 200 mm Clamping length, 4.0 kW direct drive All motors are equipped with zero branch safety, The machine has a pressure guard so that the workpiece must be clamped before the aggregates start, The hood and the protective curtain are equipped with door swi ...
Panhans 261 tenon cutter Brand: Panhans Type: 261 M-No.: 1112 Machine data: saw: 2.6 KW, 3.000rpm, tool: ø400 mm, 160 mm cutting height Slot spindle 7.5 kW - 4,000 rpm, tool: ø400 mm, spigot length: 170 mm spindle clamping length: 160 mm Table: Manuel, with pneumatic workpiece clamps Tish height: Travel 80 mm Stop: Stop can also be used as miter stop Dimensions: approx. 1.9 m x 1.6 m, 1.7 m high, plus tenon table: 0.50.8 m Weight: 600 KG
Okoma PN 2 tenon cutter Brand: Okoma Type: PN2 Year of construction: M-No.: Machine data: saw: 3.0 KW, 2.800 rpm, tool: ø400 mm, 140 mm cutting height - turret head cutting height Slot spindle 7.5 kW - 2,800 rpm, tool: ø400 mm, 4,000 rpm, spigot length: 170 mm spindle clamping length: 160 mm Table: Electric, with pneumatic workpiece clamps Tish height: Travel 80 mm Stop: Stop can also be used as miter stop Dimensions: approx. 2.2 m x 1.6 m, 1.7 m high, plus tenon table: 0.50.8 m Weight: 600 KG
I sell a combined pin cutting machine with drill head BALESTRINI I2F 1 swivel table with pneumatic material pressure. Automatic cutting saw from below. Milling head for pin or finger joint production. Drill head for dubel drilling production 3 spindle. Feed automatically. End sensors positioning. Available the same.
Round End tenoner Manufacturer: Pade Model: TSU Tenon width: 4-100 mm / + pin thickness Tenon thickness: 4-30 mm Tenon depth: 10-50 mm Support tables 2 pieces for reciprocal work Support tables Tiltable
