Trumpf TruMatic 6000 FMC -1300 Sheetmaster + Gripmaster Hersteller: Trumpf Typ: TruMatic 6000 FMC -1300 Baujahr: 2006 Zustand: gebraucht, sehr gut. regelmässig von Trumpf gewartet. Maschine ist unter Strom und im Einsatz. Betriebsstunden NC-Stunden: 70.305h Strahl-Ein Stunden: 17.217h Steurung: Siemens Sinumerik 840 D Stanzkraft: 220KN Laserleistung: 2700W Arbeitsbereich Laserbetrieb ca.: 2585 x 1280 mm Arbeitsbereich Stanzbetrieb ca.: 2585 x 1370 mm Max. Blechdicke ca.: 8 mm Auflagetische Bürstentische CE-Kennzeichnung Standardausstattung: Stabiler, gut zugänglicher C-Rahmen Koordinatenfürhung mit integriertem Linearmagazin, 21 Plätze für Werkzeuge und Spannpratzen 1 Spannpratzen Wartungsfreie Drehstrom Servomotoren Teilerutsche 500 x 500 mm (sensorüberwacht) HI-LAS Hochdruckschneiden TRUMPF Laser: CO2-Laser TLF 2700 Hochfrequenzanregung Lasersteuerung T ...
Manufacturer: TRUMPF Model: TruMatic 7000-1300 Type of machine: Punch and laser cutting combination machine Year of manufacture: 2009 Technical Specifications: - Operating hours, machine: 53,608 h - Operating hours, laser on: 48,375 h - Operating hours, beam on: 9,876 h (as of 23.10.2017) - Laser power: 4000 Watt - Max punching force: approx. 220 kN - Working area, laser operation: approx. 2540 x 1280 mm - Working area, punching operation: approx. 2540 x 1370 mm - Control system: Bosch MTX compact - Max sheet thickness: 8mm - Floor space required: approx. 7950 x 6700 mm - Machine weight: approx. 23,000 kg - Total connected load: 87 kVA Find more here - .ucymachines/ Contact us at - sales@ucymachines
Trumpf TruLaser 3030 fiber L95 Laserschneidmaschine (2023) Hersteller: Trumpf Typ: TruLaser 3030 fiber L95 Laserschneidmaschine Baujahr: 2023 Zustand: gebraucht, sehr gut, in Produktion Einschaltstunden: 11.900h Laser Strahlstunden: 2100h Geschlossener Maschinenrahmen Bewegungseinheit zur hochgenauen Bearbeitung Gantry-Antrieb in Kombination mit Lineardirektantrieben Kühlaggregat für Maschine und Laser (Wasser-Luft) Längsförderband Arbeitsraumbeleuchtung Positionslaserdiode Automatische Düsenreinigung Integrierte Schaltschränke Integrierter Schrank Geschlossene Strahlführung per Laserlichtkabel (LLK) Sprüheinrichtung Transport- und Montagevorrichtung Maschinenstatusleuchte Maschine bis 45 °C Umgebungstemperatur TRUMPF Laser Anregung über Pumpdioden Laserleistungssteuerung Schneideinheit Universalschneideinheit mit adaptivem Linsensystem Schutzglas On ...
CONTROLS electronic controls SITEC/TRUMPF system: - Laser welding system with rotary table, 2 units per side - Laser welding with Trumpf BEO D 70 welding optics - Beam guidance via laser light cable (LLK) - Inline laser monitoring system for weld seam monitoring - Weld penetration depth: 1.5 mm - Shielding gas welding possible! For aluminum or stainless steel
This 3-axis TRUMPF TruLaser 3030 incl. Liftmaster was manufactured in 2007. It features a powerful 4,000 W CO₂ laser with a maximum workpiece weight of 900 kg and a maximum simultaneous speed of 140 m/min. The machine offers an impressive X-axis travel of 3,000 mm and Y-axis travel of 1,500 mm. If you are looking to get high-quality laser cutting capabilities, consider the TRUMPF TruLaser 3030 machine we have for sale. Contact us for further details.
Automated sheet metal storage system manufactured in 2022. This TRUMPF Automated Sheet Metal Production System features a storage height of 7,900 mm and a maximum load per storage location of 3,000 kg. It includes 266 storage locations and supports sheet formats of 3,050 x 1,525 mm. If you are looking to get high-quality automated storage capabilities, consider the TRUMPF Automated Sheet Metal Production System we have for sale. Contact us for further details.
Folding Machine manufactured in 2022. This TRUMPF TruBend Center 7030 (B34) features a maximum bending edge length of 3,123 mm and a holder clamping force of 101 t. It includes a 2-axis part manipulator with a travel of 2,653 mm and an automatic loading/unloading system. If you are looking to get high-quality bending capabilities, consider the TRUMPF TruBend Center 7030 (B34) machine we have for sale. Contact us for further details.
This 7-axis TRUMPF TruBend 7050 (B28) was manufactured in 2022. It features a press force of 500 kN and a bending length of 1,530 mm. The machine includes a dynamic electromechanical drive and a CNC-controlled crowning system for precise bending operations. If you are looking to get high-quality bending capabilities, consider the TRUMPF TruBend 7050 (B28) press brake we have for sale. Contact us for further details.
Metal 3D printer manufactured in 2017. This TRUMPF TruPrint 3000 features a build volume of Ø 300 mm x 400 mm and is equipped with a 500 W fiber laser. It offers high-speed and high-density build rates, making it suitable for various applications. If you are looking to get high-quality metal printing capabilities, consider the TRUMPF TruPrint 3000 machine we have for sale. Contact us for further details regarding this machine.
This 3-axis TRUMPF TruLaser 5030 fiber L76 FMC was manufactured in 2022. It features a working format of 3,000 x 1,500 mm and a powerful 6000W solid-state disk laser. The machine includes an automatic longitudinal pallet changer and advanced cutting capabilities, such as adaptive lens systems and automatic nozzle changers. If you are looking to get high-quality fiber laser cutting capabilities, consider the TRUMPF TruLaser 5030 fiber L76 FMC machine we have for sale. Contact us for further details.
This 3-axis TRUMPF TruMatic 6000-1600 fiber was manufactured in 2022. It features a maximum laser power of 3,000 W and a punching force of 180 kN, with a maximum punching frequency of 917 strokes/min. The machine has a large working area, allowing for combined punching and laser processing. If you are looking to get high-quality punching and laser cutting capabilities, consider the TRUMPF TruMatic 6000-1600 fiber machine we have for sale. Contact us for further details.
throat: 1100 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Trumpf TruBend Center 5030Year of manuf. : 2021 ____________Description:TruBend Center 5030:- Robust machine frame: - Angular direct drive:- Crowning system:- Machine control with touchscreen operation:- TecZone Fold programming – floating licence:- 2-axis part manipulator with suction modules:- 5-axis backgauge:- Optical angle assistant:- ToolMaster:- Hold-down tools:- OBW90 and UBW90 bending toolsTechnical specificationsMinimum bending depth (standard tool):145 mmMinimum bending depth (with additional hold-down tool):40 mmMaximum bending length:3,123 mmMinimum bending length:80 mmHold-down force:101 tMaximum box height:220 mmMinimum material thickness:0.4 mmMaximum steel material thickness:3 mmMaximum stainless steel material thickness:2.2 mmMaximum aluminium material thickness:4 mmRapid traverse Y-axis (press beam):250 mm/s5-axis backgauge:1,700 mm/sToolMaster Bend:2,400 mm/sD ...
A TRUMPF CNC laser tube cutting system is offered. Max. tube length/outer circle diameter: 6500mm/150mm, Z-axis travel: 170mm, laser power: 2700W, max. material thickness steel/stainless steel/aluminum: 8mm/5mm/4mm, operating hours: 86567h, laser operating hours (laser on/beam on): 81557h/27316h. Including PRS 3001 part-removal station with brush table and LoadMaster Tube with bundle magazine LD 6000. Overall dimensions X/Y/Z: approx. 16000mm/8200mm/2800mm, weight: approx. 17.5t. An on-site inspection is possible.
table length: 2000 mm table width: 1500 mm burner heads: 0 total power requirement: kW weight of the machine ca.: t required space: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Punching force: 220 kN plate thickness: 8 mm sheet width: 3000 mm plate length: 1500 mm workpiece weight: 200 kg total power requirement: 9,5 kW dimensions of the machine ca.: 7395 x 6540 x 2072 mm Features: Punching head: - Hydraulic single-tool holder with 360° rotation - Manually adjustable holding force - Programmable holding mechanism (active/passive/re-tightening) - Spray lubrication for punch - Punch stroke counter - Level monitoring for thread forming and tool lubrication Control System: - Open control system based on Sinumerik 840 D - 12 TFT color display - Teleservice via the Internet - Automatic shutdown Data Transfer: - USB interface - RJ-45 network connection Safety: - CE marking - Dual-beam photoelectric sensors - Hydraulic emergency shutdown - Warpage detection Programming: - TruTrops Punch via network access 1 x MultiTool function 1 x MultiShear function 1 x Thread formi ...
sheet width: 2500 mm plate length: 1250 mm plate thickness: 8 mm Punching capacity: 220 kN Number of working hours: 51.658 h total power requirement: kW weight of the machine ca.: 11.050 kg The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
pressure: 400 t chamfer lenght: 4050 mm distance between columns: 3550 mm control: CYBELEC ModEva 10 S total power requirement: 47 kW weight of the machine ca.: 30.400 kg dimensions of the machine ca.: 6000x3000x3450 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
pressure: 130 t chamfer lenght: 3060 mm distance between columns: 2690 mm column arm: 410 mm stroke: 365 mm dayligth: 535 mm ajustment speed: 200 mm/sec working feed: 1.0 - 10.0 mm/sec return speed: 135 mm/sec table width: 120 mm table height: 1050 mm tiltable up to: +/- 10.0 mm Number of working hours: ca. 31.800 h compressed air: 5.0 - 7.0 bar oil volume: 250 l operating pressure: 340 bar voltage: 400 V total power requirement: 23.0 KVA weight of the machine ca.: 12950 kg range L-W-H: 3660 x 2310 x 2900 mm Equipment: - CNC electro-hydraulic folding/die bending press - DELEM CNC control - swiveling front left High-resolution graphic screen Clear, concise menus in the operators language Large tools and products library Graphical 2D programming automatic bending sequence calculation and collision detection EMERGENCY stop button at the front - CNC axis adjustment: Y1 - Y2 - X - R ax ...
pressure: 130 t chamfer lenght: 3060 mm distance between columns: 2690 mm column arm: 410 mm stroke: 365 mm dayligth: 535 mm ajustment speed: 200 mm/sec working feed: 1.0 - 10.0 mm/sec return speed: 135 mm/sec table width: 120 mm table height: 1050 mm tiltable up to: +/- 10.0 mm Number of working hours: ca. 31.800 h compressed air: 5.0 - 7.0 bar oil volume: 250 l operating pressure: 340 bar voltage: 400 V total power requirement: 23.0 KVA weight of the machine ca.: 12950 kg range L-W-H: 3660 x 2310 x 2900 mm Machine in a well-maintained condition () with only approx. 31.800 operating hours - in checked condition - machine video - https://www.youtube.com/watch?v=PBV-MDtZnlE Equipment: - CNC electro-hydraulic press brake - DELEM CNC control model DA 65 swiveling control panel, front left 2D graphic programming & product display Tool & program library USB keyboard and mouse interface ...
pressure: 230 t chamfer lenght: 3060 mm distance between columns: 2690 mm Stroke: 365 mm Control: DELEM DA 65 throat: 410 mm dayligth: 535 mm dimensions: 3660 x 2310 x 3100 mm machine weight ab.: 17.700 kg The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Punching capacity: 220 kN plate thickness: 8 mm working area: 2535x1280 mm sheet thickness for stainless steel: 4-6 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Punching capacity: 165 kN working area: 2070 x 1280 mm plate thickness: 6,4 mm control: CC 220 workpiece weight: 150 kg punch diameter: 76,2 mm : 80 m/min : 55 m/min weight of the machine ca.: 8000 kg The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Punching capacity: 220 kN plate thickness: 8 mm working area: 2535x1280 mm sheet thickness for stainless steel: 4-6 mm Accessories: -Setup cassettes -Table with ball rollers Youtube video link: https://www.youtube.com/watch?v=1RlPrkZPN0Y&ab_channel=BaestleinGmbH The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Manufacturer: Trumpf Year of Manufacture: 2005 Model: TrumaBend S 700-45 Type of Machine: CNC Hydraulic Press Brake Technical Specifications: - Working Length: 4,550mm - Pressing Force: 7,000 kN (approximately 700 tonnes) - Weight: 49,000 kg - Oil Quantity: 700 liters - Operating Voltage: 3 x 400V AC, 50Hz - Control Voltage: 24V - Control Type: ModEva 12S (Cybelec) - Main Fuse Nominal Current: 200A - Connected Load: 69 kW - Distance Between Machine Frames: 3,500mm - Maximum Bending Length: 4,550mm at a bending depth of 590mm - Bending Arm (without tool): 490mm. Obstruction edge protrudes 300mm from the bending arm. - Maximum Bending Depth at 3,500mm Length: 1,750mm for single bends, 1,250mm for Z-bends Hours are being check, but it was used in 2x shift operation. Will be available end of the year. No tools included, only the machine The machine has been running continuously for ...
CO2 laser cutter Manufacturer: Trumpf Model: TruLaser Cell 7040 Type of Machine: TruLaser Cell 7040 Year of Manufacture: 2007 Laser Power: 5000W Beam ON Hours: 9,039 System ON Hours: 59,226 Find more here - .ucymachines/ Contact us at - sales@ucymachines
pressure: 100 t chamfer lenght: 3050 mm distance between columns: 2550 mm total power requirement: 20 kW weight of the machine ca.: 7.700 kg dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
A Trumpf CNC laser cutting machine is offered. Working area X/Y: 3000mm/1500mm, Z-axis travel: 115mm, laser power: 5000W, max. material thickness steel/stainless steel/aluminum: 25mm/20mm/12mm, operating hours: approx. 35000h, laser operating hours: approx. 13000h. The following components were replaced: E/R module in 2024, power tube in 2020 and blower turbine in 2016. Overall dimensions X/Y/Z: approx. 11100mm/4600mm/2400mm, weight: approx. 12t. An on-site inspection is possible.
201122,146 h180 kN400 V / 50 Hz18 kVA24 V DC3 x 25 A7 - 14 bar05/2026Tool cassettes, various punches and dies, MultiTool, Easy Type
An automatic TRUMPF sheet loading and unloading unit for laser cutting machines is available. Max. sheet dimensions X/Y: 3000mm/1500mm, min. unloaded part dimensions X/Y: 150mm/150mm, max. sheet weight: 1100kg, max. loading stack height: 300mm. Documentation available. An on-site inspection is possible.
