We use cookies to optimize our website for you and to be able to continuously improve it. By continuing to browse the site you are agreeing to our use of cookies.
Disagree
Model
(Manufacturer: OKUMA)
used
This OKUMA TWIN STAR LT200-M Lathe was manufactured in the year 2004 in Japan. It is equipped with an OKUMA P200L control unit. The machine has a spindle speed of 6000 rpm.
used
This OKUMA MA-600HB Horizontal Machining Center was manufactured in the year 2006 in Japan. The machine has a spindle speed of 60-5000 rpm and has 4 axis.
used
This Okuma VTM-200 1ST Lathe was built in the year 2009. It is equipped with an OPS P300S control unit and has 17700 hours, of which 5375 are cutting hours. The machine has a spindle speed of 4500 rpm and has been regularly serviced and well maintained, service history available.
used
This OKUMA MA-400HA Horizontal Machining center was made in 2006. It has 4 axis.
used
This OKUMA LT10 Lathe was manufactured in the year 2002. It is equipped with a Siemens 840 D control unit.
used
This OKUMA MB 56-VA Vertical Machining center was manufactured in the year 2003. It is equipped with an OKUMA OSP U100 control unit and has 3 axis. The machine has a spindle speed of 15000 rpm.
used
This Okuma MX-50HB Horizontal Machining center was made in 1997 in Japan. It is controlled by an Okuma OSP700M control unit and has 3 axis. The machine has a spindle speed of 50-10000 rpm.
used
This OKUMA LT10-M Lathe was made in 2001. It is equipped with a Siemens 840 D control unit.
used
This OKUMA LB 200M Lathe was made in 2000. It is equipped with a Okuma OSP 100L control unit and has 3 axis. The machine has a spindle speed of 50-6000 rpm, is in good condition and well maintained.
used
This OKUMA Genos M560R-V Vertical Machining center was manufactured in the year 2014 in Taiwan and has 5800 production hours. It is equipped with an OKUMA OSP-P300M-R control unit. The machine has a spindle speed of 12000 rpm.
used
Okuma MA50HB HORIZONTAL. 10,000 revolutions. 60 tools. Renishaw and presetting. Perfect conditions
used
CNC: Okuma CNC version: MX 40 HA X-axis travel: 560 mm Y-axis travel: 610 mm Z axis travel: 560 mm Pallet number: 2 Board/Pallet Size: 400mm x 400mm Table capacity: 400 kg Continuous pallet (table) rotation control: Yes Degrees of rotation for indexed pallet (table): 360° Number of controlled axes: 4 Number of tools: 40 Spindle taper: 40 BT/SK/ISO/HSK RPM: 7000 rpm Refrigeration through the chuck: Yes Power: 20 kW Chip conveyor: Yes
used
Used Okuma MA50H / 1000 Machining center - palletized Year 2001 Cnc Okuma Ops U 100 M X 700, Y 800, Z 700 Table 500 x 500
used
For sale is a vertical center milling OKUMA, type MB 46, gantry type, year of manufacture 2008, Hodi 762/460/460, table 1,000×460, laser for tool calibration, laser for workpiece calibration, spindle BT 40, 16,000 revolutions, 22 kW motor ,20 bar cooling over the spindle, weight 7.5 t
used
Okuma MA- 60HB Horizontal Machining Center Machine is in good condition
used
The Okuma Genos LVT300M CNC lathe shown in the picture is for sale. The machine is currently in production! It can be viewed during operation. Main parameters: -Control:OSP100 -Hydraulic chuck -Hydraulic saddle -Maximum swing: 300mm -Maximum length: 200mm -Spindle diameter: 40mm -Turret: 12
used
The machine is currently in production! Driven tool C-axis machine. It can be viewed during operation. Main parameters: -Control:OSP100 -Hydraulic chuck -Hydraulic saddle -Maximum swing: 300mm -Maximum length: 200mm -Spindle diameter: 40mm -Turret: 12
used
CNC control, control panel, machining center -Disassembled from a: CNC lathe Make: Okuma type LB15 -complete unit -Dimensions: 790/600/H495 mm -Weight: 79 kg
used
Bi-spindle lathe OKUMA and HOWA 2SP-V55 n.1 Okuma OSP cnc control Turning diameter 550mm Turning height 635 mm rpm 2000 turning power 30KW ASA11 12-station non-motorized turret Machine in perfect working order, year 2004, with control monitor just changed Montano 2 Autoblock 450 spindles
used
Okuma MB 56 VA Vertical Machining Center Control Unit : OSP U100M X/Y/Z : 1050 mm / 560 mm / 460 mm Machine is in good working condition
used
Okuma TS-4000YS with C and Y Axis Running time : 7490 Cutting time : 4509 Double chuck C and Y axis Machine is from 2015 but installed in 2016â Machine is in excellent condition Maximum turning length : 750 mm Maximum turning diameter : 370mm 12+12 turret Fanuc control unit Extras: âBarload bar feeder(52mm) 4 unit live tool Cooling water pump Air gun system Part catch system Measuring tool for chuck TiwaP-I
used
Okuma MA400-HA Horizontal Machining Center X : 560 mm Y : 560 mm Z : 600 mm Table size: 400x400 mm High pressure pump
used
Okuma LB35 II CNC Lathe Maximum turning length: 2000 mm Maximum turning diameter : 600 mm 18 inches chuck(SMW) IGF program Machine is in very good condition Turret VDI50 holder Some tools will be given together with the machine All maintenance has been done
used
swing over bed: 550 mm Swing over cross slide: 530 mm control: OKUMA OSP-U100L travel -x1 axis: 475 mm travel -x2 axis: 160 mm travel -z1 axis: 1.170 mm travel -z2 axis: 1.155 mm travel -y axis: 160 mm travel C - axis: 360° ° travel B - axis: 210° ° numbers of positions in the tool changer: 84 number of tapers in turret head: 12 Dimensions (L x W x H): 4.320 x 2.645 x 2.900 mm weight of the machine: 12.500 kg CNC Turning- and Milling Center | OKUMA - MacTurn250-W with palletizing system and robot handling The machine is in a well-maintained condition. A machine video from the production plant will be shared on request. - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - #Tags: MacTurn250 | MacTurn250 W | MacTurn 250 | MacTurn-250 The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
used
x-travel: 560 mm y-travel: 610 mm z-travel: 560 mm control: OSP total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
used
max. turning diameter: 580 mm turning length: 1500 mm control: OSP 7000 L greates pass round over bed: 610 mm swing diameter over slide rest: 580 mm Main spindle:: turning speed range - main spindle: 12 - 2.800 min/-1 spindle bearing diameter: 150 mm spindle bore: 110 mm spindle nose: JIS A2-11 power capacity - main spindel: 37 (30) kW C-Axis: 0,001 ° axis stroke:: x-axis: 598 mm y-axis: 230 (+110 / -120) mm z-axis: 1.660 mm feeds:: rapid traverse: X / Y: 12.000 mm/min rapid traverse: Z: 20.000 mm/min rapid traverse: C: 100 min/-1 cutting feed speed: X / Z / Y: 0,001 - 1.000 mm/U turret:: type: H2 ATC number of toolpositions: 2 (1x L-Tool / 1x M-Tool) pos. driven statition: stufenlos / stepless Spindle speed - driven tool stations: 40 - 3.000 min -1 tool shank height: 25 mm Boring bar shank diameter: 50 mm Tailstock:: diameter of quill: 120 mm quill stroke: 170 mm taper of center: ...
used
Turning diameter: 0 mm Turning height: 290 mm Chuck diameter: 72 mm Number of chucks: 3 CNC Brand: Okuma CNC Model: OSP-200 X Travel 290 Z Travel 590 Power 22 kW Driven live tools 7.5 kw / 3000 Rpm In feed table Out feed table Package jaws Package tool holders Chip conveyor Coolant system 9 Bar Grundfos
used
CNC control, numeric control, CPU rack made of OKUMA LB 10 OKUMA type OPUS 5000 CPU /IF RACK 9A SKU: E7191-292-325-1 Year of construction 1985 Ser. Nr.: 003184 Dimension W x H x D 390 x 345 x 240 mm The device is still installed ready for operation in an OKUMA LB 10. Further components from OKUMA can be found under stock number: 60403, 60404, 60405, 60407, 60408, 60409, 60410, 60411; used
used
Turning diameter: 280 mm Turning height: 210 mm Chuck diameter: 210 mm Number of chucks: 1 CNC Brand: Okuma CNC Model: OSP-P200L X Travel 210 Z Travel 360 Power 22 kW Driven live tools 7.5 kw / 3000 Rpm In feed table Out feed table Package jaws Package tool holders Chip conveyor Coolant system 9 Bar Grundfos Max. turning Ø:280mm Table Ø: 210mm ATC / revolver:12 Speeds / ranges:4000Rpm C-Axis: 360000°
used
Turning diameter: 900 mm Turning height: 900 mm Chuck diameter: 800 mm Number of chucks: 1 CNC Brand: _Unknown / Other CNC Model: OSP-P200L Max. turning Ø: 900mm Table Ø: 800mm Horizontal movement support:900mm ATC / revolver: 12 Speeds / ranges: 2000Rpm Power: 30kW Length: 5200mm Width: 3500mm Height: 3400mm Weight: 14000kg