gear cutting and hobbing machines used for sale

Inv. Num. : 6256 Type: ZSTWZ Producer: WMW Created: 1954 Parameters: Maximum gear diameter (outer teeth): 1000 mm Table diameter: 900 mm Machine dimensions: 3000x1200x2300 mm External. internal module M 1 - 8

control:siemens 1P 6SL 3054--0CE01-1AA0 Documents:vorhanden

Gear hobbing machine MIKRON 102 Max. workpiece diameter 120 mm Max. Modul 2 Max. lenght of teeth 130 mm Min./max.nr of teeth 6 – 325 Angle on helical gears 0 – 90 °

Key data: 500 mm, 300 mm, 5

I am selling a well-used gear milling machine from WMW Modul, model ZFWZ 500x5. The machine is fully functional and runs without any problems. The foot (coolant device) and the entire machine were completely cleaned. The connection cable and plug were replaced. When sold, the entire oils are renewed. Largest wheel diameter is 500mm Largest module is 5. The weight of the machine is 1950kg. Incl. complete, original cabinet with interchangeable wheels and an instruction manual. The machine has already been overhauled. The guides show almost no signs of wear. If you have any further questions, please do not hesitate to contact us. The machine can be viewed and tested under power by prior appointment. On-site loading is no problem and free of charge. The sale is without guarantee and warranty. Returns are excluded. All information is subject to change.

grinding wheel diameter:400 mmtotal power requirement:3 kWweight of the machine ca.:1,5 tdimensions of the machine ca.:1,5 x 1,4 x 1,3 mDressing Grinder for gears REISHAUER AMmax. width of grinding wheel 104 mmmax. dia. of grinding wheel 400 mmmax. module 7min. module 0,5pressure angle 10 - 30 °grinding worm dia. 270 - 400 mmwidth of grinding worm 62/84/104 mmgrinding worm turning speeds: at profiling 18/35/70 U/minelectrics - voltage/frequency 380 / 50 V/Hzlong. movement of crowning device 156 mm

KOEPFER 151 Gear Hobbing Machine - Horizontal Available 2 machines. Semi-automatic machine Max. gear dia 150 mm Module 2 Max Profile depth / Plunge cut depth 7 mm Max hobbing length 135 mm Max length of workpiece, approx. 280 mm Hob slide swivable 250 degrees Hob size dia x length 65 x 60 mm Hob shifting, manually max. 40 mm Hob Spindle speeds 140 – 1120 rpm Workspindle bore 24 mm Bore of collet chuck, max. 3 – 24 mm Feed range, axial/plunge cut 0.06 – 2 mm/rev No. of teeth, min./max. 6 - 200 Spindle Drive/Total electrical load, approx. 2,2 / 4 kW Weight, approx. 1,400 kg Very good condition

max. wheel diameter:150 mmmax. module:3 min. module:1 weight of the machine ca.:7,2 tdimensions of the machine ca.:2,44 x 1,43 x 2,46 mgrinding wheel diameter:206-275 mmBetriebsstunden: 99.235Incl. automatic loading system Felsomat, without filterNo Twist Control Grinding Option

KLINGELNBERG PFS 600 Gear Testing Machine Gear Diameter 15-600 mm Gear Width 160 mm Module Range 0.5-15 Stroke of Feeler 165 mm Height between centers 50-650 mm Max. Length of Workpiece 665 mm Helix angle 0-90 Max. Weight of Workpiece 300 kg

max. wheel diameter:150 mmmax. module:3 min. module:1 weight of the machine ca.:7,2 tdimensions of the machine ca.:2,44 x 1,43 x 2,46 mgrinding wheel diameter:206-275 mmWorking hours 98.780Incl. automatic loading system FelsomatNo Twist Control Grinding Option

KOEPFER 153 Gear Hobbing machine Cutting diameter with loader 80 mm Cutting diameter without loader 142 mm Max. module 2 Cutting length 150 mm Workpiece length 300 mm Workpiece length with loader 220 mm Miller dimensions 70 x 71 mm Miller rotation speed 280 -2240 rpm Head inclination +/- 35° Dimensions : 1690 x 1410 x 1640 mm Weight 3t

frequency:5.000-150.000 Hzweight of the machine ca.:10 tZ-axis:45-50 mmX-axis:pneumatisch working lenght:45-50 mmwith induction generator Sinak 100PH CN: 26811/100014 built in 2006 with belt filter press Heat exchanger and hydraulic unit

MIKRON 122.01 Gear hobbing machine Max. hobbing Ø straight/helical wheels 40 mm Max. hobbing length 40 mm Number of teeth 2 - 400 Max. module 1 Speed of the mill 250 – 2000 rpm Feed : 0.05 - 0.8 mm/R Helix pitch 15 - 2437 mm Helix angle to the right or to the left 0 - 90° Collet type W12 Weight 280 kg

max. wheel diameter:30-150 mmmax. module:6 total power requirement:36 kWweight of the machine ca.:11 tdimensions of the machine ca.:2,4 x 2,5 x 3,4 m

Komsomolec 5K328A Gear hobbing machine Max. work piece diameter 1250 mm Max. work piece diameter with support 850 mm Table diameter 1000 mm Module 12 Max. table load 2000 kg Min. number of processed teeth 20 Max. length of processed teeth mm: - straight 560 - 30 degrees angle 400 Main drive power 10 kW Machine dimensions 3560x1790x2590 mm Machine weight 14000 kg

weight of the machine ca.:8 tdimensions of the machine ca.:2,95 x 1,6 x 2,36 mchucking diameter:250 mmswing diameter:265 mmx-travel:170 mmz-travel:200 mmspindle turning speed range:1.500 U/minspindle bearing diameter:100 mmPick-up machine

PPSM Habrama 2200 Precision Profile Grinding Machine Rack and Pinion Grinding Machine Manufacturer [manufacturer]: Habrama Type [ type]: PPSM 2200 Control unit: Siemens 840D sl Sinumerik Construction year: 10/2009 Travel paths: X-axis (longitudinal): 2200(2500)mm Y-axis (transverse): 500mm Z-axis (vertical): 410mm C-axis: +30°/-30° B-axis: +20°/-20° U-axis: 105mm W axis: 125mm B2 axis: +20°/-20° Workbench: 390 x 3.750mm Max. table load: 4000kg Feed speed X-axis [feed speed]: 21m/min Feed speed Y-axis [feed speed]: 10m/min Feed speed Z-axis [feed speed]: 6m/min Feed speed C-axis [feed speed]: 2m/min Feed speed B-axis [feed speed]: 6m/min Feed speed U-axis [feed speed]: 4m/min Feed speed W-axis [feed speed]: 4m/min Feed speed B2 axis [feed speed]: 6m/min Grinding head Drive power: 45kW (S6 at 40%) Spindle speed: max. 4000 1/min ...

max. wheel diameter:1500 mmgear width:600 mmmax. module:16 min. module:1 total power requirement:38 kWweight of the machine ca.:18,7 tdimensions of the machine ca.:7,7 x 3,6 x 4,5 m mRetrofit in 2004, original from the 80s No internal hobbing device

Escofier I300V Gear Rolling Machine CNC Thread Roller & Polishing Machine Fabr. Escofier, type Flex 40 Syncroll, YOC 2011 Siemens control system, type Sinumerik

max. wheel diameter:130 mmgear width:170 mmmax. module:3 min. module:0,5 total power requirement:48 kVAweight of the machine ca.:9 tdimensions of the machine ca.:7,64 x 3,14 x 3,25 mFor technical data, see PDF-File enclosed

7 stueck LORENZ or LIEBHERR Schraegfuehrungen - see pictureFurther:Airfilter (Euro 1000,--)

Dressing diameter:110 Planing width:9999 min. module:0,5 max. module:10 spindle turning speed range:2800 1/minpressure angle: 15 - 25 ° °run-out tolerance:0,001 mmWeight:22 kg

max. wheel diameter:400 mmmax. module:10 min. module:0,3 weight of the machine ca.:11,5 tdimensions of the machine ca.:3,3 x 2,75 x 2,8 mmax. number of teeth:999 min. number of teeth:5 Width of teeth:0-300 mmpressure angle max.:30 pressure angle min.:14 workpiece weight max.:300 kgworm grinding diameter:300...205 mmwidth of grinding worm:125+0,7 / -0,5 mmboring diameter:160 H7 mmwith loading device FELSOMAT Type: FZ250 Year of construction: 2002 No tail stock

max. wheel diameter:275 mmgear width:55 mmmax. module:6,5 min. module:1,5 Face Hobbing-Continious ProcessContinuous process: The workpiece and tool (usually Spiron) rotate at the same time, and all teeth are created in one operation at the same time. Knife head has several knife groups (not arranged in a circle) Parallel tooth Conical tooth tip surface Single Item procedure: The workpiece is stationary and the tool (usually Arcon) rotates and cuts a tooth by immersing the tool. Once a tooth is cut, the tool moves out of the tooth again, the workpiece divides by one tooth width and the next tooth is cut until all teeth are finished. Knife head has arranged all knives in a circular path. Conical tooth height Parallel tooth head surfaceC28 can do both, wheel + pinion. However, a C28 must be ?prepared? for the individual part procedure. I.e. direct measuring system + part gear brake, workpie ...

Manufacturer: WMW Type: ZFWZ 500 x 5 Stock number: 1010 Wheel diameter - max.: 500 mm Wheel width: 180 mm Module - max. 5 Module - min. 0.5 Total power requirement 3.5 kW Machine weight approx. 1950 kg Table bore: MK 5 Distance between milling cutter and workpiece 10 - 200 mm Speed range: 50 - 200 rpm Table diameter: Ø 250 mm Control: conventional

workpiece diameter:38 mmworkpiece length:500 mmrack milling length - max.:610 mmprofile width:92 mmmodule range:0,3-1,3 slide stroke:760 mmdrive motor: kWelectrics - voltage/frequency:380/50 V/Hztotal power requirement:24 kWweight of the machine ca.:10 tSpline/cold Rolling Machine EX-CELL-O XK 251 with automatic loading device FELSOMAT PE03, fitted in 1999 and tailstock.A cold rolling machine, intended for non-cutting shaping of profiles, such as plug type gearing (straight or diagonal), spiral gearing, oil grooves

max diam 670 , max modul 12

workpiece diameter:38 mmworkpiece length:500 mmrack milling length - max.:610 mmprofile width:92 mmmodule range:0,3-1,3 slide stroke:760 mmdrive motor: kWelectrics - voltage/frequency:380/50 V/Hztotal power requirement:52 kWweight of the machine ca.:10 tSpline/cold Rolling Machine EX-CELL-O XK 251 with automatic loading device FELSOMAT PE03, fitted in 1999 and tailstock.A cold rolling machine, intended for non-cutting shaping of profiles, such as plug type gearing (straight or diagonal), spiral gearing, oil grooves