Manufacturer:
The distance indication is not possible, because your location could not be determined. Prerequisite is that your browser allows cookies and location determination.

Manufacturer:
(Category: 112-1194)

AB 1
WMW 2
gear cutting and hobbing machines / Gear Cutting Machines
date: 22.02.2024 add to watchlist
approved
dealer
item-No.: 152589551
New in: 2019

new

check Seller: TechModus LT
Location: Land-de
Price: 1.000 € add to watchlist

harden furnace 1200 0.6x0.6x1.0m temperature 100 - 1200 Celsius possible various size Industrieöfen Neubauten Industrieöfen gebraucht Plasmanitrieranlagen Drehherdöfen Drehtrommelöfen Durchlauföfen Herdwagenöfen Induktionshärteanlagen Kammeröfen Ofenanlagen Schachtöfen Vakuumöfen Herdwagenofen Rollenherdofen Kammerofen Drehtellerofen Wagenherdofen & Tunnelofen Poreba Gurutzpe Tacchi Geminis Tos Amutio cazeneuve Skoda Morando Niles Colchester Heyligenstaedt Kramatorsk Mondiale Safop Cazeneuve Alzmetall mas stankoimport csepel carlton kolb soraluce bergonzi flott Erfurt Weingarten smeral schuler ebu mueller zts kosice wlochy minster Stanko stankoimport glaser huta zygmunt aft donaldson eumuko Elblag Engel Demag Arburg Krauss Maffei Battenfeld Manesty Mazak Voronezh Trumpf Amada Cincinnati Netstal Rose Forgrove Illig Foremost Nissei Sandretto Fette Mazak Mori seik ...

gear cutting and hobbing machines / Gear Cutting Machines
date: 12.03.2024 add to watchlist
approved
dealer
item-No.: 162731586
New in: 1993

used

check Seller: Evelin of America Corporation
Location: Land-us

add to watchlist

Klingelnberg S-35 10-Axis CNC Gear Cutting Machine 10-AXIS CNC CONTROL SUITED FOR MEDIUM & LARGE SPIRAL BEVEL & HYPOID GEARS 23.6" MAXIMUM WORKPIECE DIAMETER DESIGNED HIGH DEPENDABILITY & PRECISION CONTINUOUS & SINGLE INDEXING OPERATIONS SPECIFICATIONS: MAXIMUM WORKPIECE DIAMETER 23.6" (600mm) SMALLEST NORMAL MODULE 0.137" LARGEST NORMAL MODULE 0.393" MAX TOOTH WIDTH 3.93" SMALLEST TRANSMISSION RATIO 1:1 LARGEST TRANSMISSION RATIO 1:10 SPIRAL ANGLE (DEGREES) 0-60 CUTTER HEAD SPINDLE: OERLIKON SHORT TAPER 1:4 0-5.118" SPINDLE SPEEDS (INF. VAR.) 30-350 MIN-1 SPINDLE TILT (DEGREES) 0-35 ECCENTRICITY 0-10.82" CUTTER HEAD RADIUS 3.46"-7.12" WORKPIECE SPINDLE OERLIKON OUTSIDE TAPER 1:4 0-8.85" INSIDE TAPER NO. 39, 1:19,692 6" MAX SPINDLE SPEED 0-160 MIN-1 BORE 0-6.29" AXIAL OFFSET +/-2.36" SWIVEL RANGE (DEGREES) -7 UP TO 90 FEEDS: GENERATING FEED ( ...

gear cutting and hobbing machines / Gear Cutting Machines
date: 12.03.2024 add to watchlist
approved
dealer
item-No.: 161002995
New in: 2010

used

check Seller: Evelin of America Corporation
Location: Land-us

add to watchlist

CNC GEAR HOBBING MACHINE LIEBHERR LC 3000 FN Year: 2010 Control : SIMENS 840D Table diameter: 2600mm Max. workpiece diameter: 3000mm Table hole: 700mm Max. table speed: 5 RPM Center distance with external cutter head: 210…2100mm Center distance with internal cutter head: 0…1800mm Workpiece load: 300kN Max. axial travel: 1200mm Cutter head swiveling angle: +/-45 degrees Original table size is 2000mm, but the factory made a new sub table and put it on top of the original table and used it. Including external milling head, chip conveyor. All manual books available. Low working hours. Excellent working condition.

gear cutting and hobbing machines / Gear Cutting Machines
date: 10.10.2023 add to watchlist
approved
dealer
item-No.: 162580591
New in: 1976

used

check Seller: SWH GmbH
Location: 38820 Halberstadt Land-de

add to watchlist

Ref. -No.: 10103Manufacturer: MAAGYear of construction: 1976Type of control: KonventionellControl: N/AStorage location: HalberstadtCountry of origin: SchweizMinimum number of teeth: 6 Max. Number of teeth: 300 Serial no.: 4216 Gear width: 200 mmMax. Pile driving: 225 mmMax. Wheel Diameter: 750 mmMin. Wheel Diameter: 30 mmTable Diameter: 500 mmMax. Module: 10 mmMin. Module: 1 mmSpiral Angle: 0/60 °

gear cutting and hobbing machines / Gear Cutting Machines
date: 12.03.2024 add to watchlist
approved
dealer
item-No.: 163170305
New in: 2020

new

check Seller: Evelin of America Corporation
Location: 06514 Hamden Land-us

add to watchlist

MITSUBISHI GUIDELESS CNC GEAR SHAPER Model ST40A s/n will advise Condition; NEW Condition Delivered and installed July 2020 low hours Less than 1900 hours Machine was delivered and installed 3rd QTR of 2020 and has been hardly used. Customer is looking to sell due to limited work and project loss.machine is available for immediate inspection. Machine is equipped with all required features, Tailstock & Pinion support, chip conveyor and all options. Machine wont last contact us today Machine specifications to follow shortly: -Maximum diameter capacity 18" / 450 mm Option -Maximum DP/ module 3.175 DP/8 mod -Maximum work width 4.52" / 115 mm -Maximum cutter stroke 5.31" / 135 mm -Maximum helix angle + 45 deg -Cutter stroke 30-600 SPM -number of cuts 1-4 -Center distance from cutter Max/ Min 16.73" / -4.92" -Maximum radial travel 21.65" -Height of work table to spindl ...

gear cutting and hobbing machines / Gear Cutting Machines
date: 05.02.2024 add to watchlist
approved
dealer
item-No.: 163295466

used

check Seller: AUER
Location: 4407 Steyr-Gleink Land-at

add to watchlist

Wheel diameter - max. 320 mm Wheel width 50 mm Module - max. 7.5 Module - min. 2.1 Total power requirement 13 kW Machine weight approx. 7 t Space requirement approx. 1.7 x 1.9 x 2.7 m Tooth width max. 50 mm Adjustment range for hypoid wheels (offset) +/- 60 mm. Through-hole spindle pieces 78 mm. Dive max 20 mm. Cut feeds, infinitely variable 0.04 - 25 mm/min. Distance between taper tip/workpiece spindle... 100 - 345 mm. Distance between the centre of the cone and the cutter head axis 25 - 150 mm. Distance between the center of the taper and the milling head spindle... 80 - 220 mm. Max. ring wheel Ø at medium spiral angle... 320 mm. Max. gear ratio 1 : 9.5 Module 2.1 - 7.5 Outer cone spacing approx. 170 mm. Rapid traverse 1.5 m/min. Roll feeds in minutes of angle... 0,3 - 20 Spindle nose with short taper, inside 140 mm. Spindle nose with short taper, external 85 m ...

gear cutting and hobbing machines / Gear Cutting Machines
date: 07.12.2023 add to watchlist
approved
dealer
item-No.: 160297403

used

check Seller: ENGINEX KOSICE
Location: Land-sk

add to watchlist

Package of the Oerlikon machines: 5 pcs Gear milling machine Oerlikon SM 3 2 pcs Gear tester Oerlikon SKT 2 pcs Laping gears Oerlikon SL 3 2 pcs Tool sharpener Magerle SKB

gear cutting and hobbing machines / Gear Cutting Machines
date: 19.02.2024 add to watchlist
approved
dealer
item-No.: 163394187

used

check Seller: PHU GOMET -MACHINERY
Location: 42230 Koniecpol Land-pl

add to watchlist

max diam 250 , max modul 5

gear cutting and hobbing machines / Gear Cutting Machines
date: 11.04.2024 add to watchlist
approved
dealer
item-No.: 163786635
New in: 1982

used

check Seller: PHU GOMET -MACHINERY
Location: 42230 Koniecpol Land-pl

add to watchlist

max diam 670 , max modul 12

gear cutting and hobbing machines / Gear Cutting Machines
date: 10.01.2024 add to watchlist
approved
dealer
item-No.: 161626218

used

check Seller: PHU GOMET -MACHINERY
Location: Land-pl

add to watchlist

MAX DIAMETER 1500 MAX MODUL 15

You didn't find your wanted machine? send wanted inquiry to all dealers (no registration necessary)
Banner ad information