used HAAS cnc

We are selling a Haas ST-20 turning center on behalf of a customer. The machine was installed and never used productively., - Control Options, - Options package, - High pressure coolant flow, - Accessory package

Table length: 1270 mm Table width: 500 mm Longitudinal X: 1270 mm Cross Y: 508 mm Vertical Z: 635 mm CNC Brand: Haas X - Travel:     1270mm Y - Travel:     508mm Z - Travel:     635mm Table Length:   1320mm Table Width:    500mm Table load:     800 Feed rate X-Axis:20000mm/min. Feed rate Y-Axis:20000mm/min. Feed rate Z-Axis:20000mm/min. Spindle Taper:  40ISO/Bt/Mk Power on spindle:15kW Speeds / ranges:10000Rpm ATC / revolver: 24 Length:         3500mm Width:          2500mm Height:         2800mm Weight:         5500kg

Table length: 1270 mm Table width: 500 mm Longitudinal X: 1270 mm Cross Y: 508 mm Vertical Z: 635 mm CNC Brand: Haas X - Travel:     1270mm Y - Travel:     508mm Z - Travel:     635mm Table Length:   1320mm Table Width:    500mm Table load:     800 Feed rate X-Axis:20000mm/min. Feed rate Y-Axis:20000mm/min. Feed rate Z-Axis:20000mm/min. Spindle Taper:  40ISO/Bt/Mk Power on spindle:15kW Speeds / ranges:10000Rpm ATC / revolver: 24 Length:         3500mm Width:          2500mm Height:         2800mm Weight:         5500kg

Table length: 0 mm Table width: 0 mm Longitudinal X: 0 mm Cross Y: 0 mm Vertical Z: 0 mm Positions ATC: 0   Positions APC: 0   CNC Brand: 0 CNC Model: 0 Control: HAAS AUTOMATION Technical data Table length: 1219 mm Table width: 457 mm Table load max.: 794 kg Longitudinal travel (X-axis): 1016 mm Transversal travel (y-axis): 508 mm Vertical travel (z axis): 635 mm Pallets: number: 2 Tool changer: Number of tools: 40 Tool diameter max.: 64 mm Diameter with free adjacent pockets: 127 mm Tool lenght: 330 mm Max. tool-weight: 5.4 kg Time of tool changing: 2.8 sec Distance spindle nose to table: 742 mm Spindle speeds: stepless up to: 12000 rpm Work feed rate: 21.2 m/min Rapid traverse:: 35.6 m/min Air connect: 6 bar Voltage 50 Hz 3x: 400 Volt Spindle power: 22.4 kW Machine´s weight about: 6300 kg Various accessories: Coolant system: 208 l Tool setter Renishaw Pallets chanching device:

HAAS TM-1P CNC vertical machining center was manufactured in 2014 in the United States. This extremely easy-to-use machine with extensive machining capabilities ensures efficient and precise machining of workpieces over its entire lifetime. The machining process is performed on a stable work table using reliable components in the form of cutting tools and a high-speed spindle. In addition, each tool is continuously measured by an extremely accurate RENISHAW measuring probe to ensure that the process runs continuously and without any interruptions. All machining parameters are programmed in the intuitive HAAS CNC control. The perfectly optimised controller allows for the creation of advanced machining programmes in just a few steps, without knowledge of G-codes. The HAAS TM1P CNC machining center is also offered with optional equipment which includes, among others, milling heads, colle ...

Machine Details Warehouse number 1105-03536 Machine type CNC lathe - inclined bed machine Haas brand Type SL 20 THE Year of construction 2006 Control type CNC Control Haas Storage location HAGUENAU Country of origin Delivery time immediately Freight base from location Technical details Turning diameter 584 mm Turning length 533 mm Control Haas Chuck diameter 210 mm Passage 51 mm Circulation diameter 584 mm Speed 4000 rpm Power 407 Nm Power 15 KW Tool changer 12 COMPARTMENT Gear levels 0 Total power requirement 25 kW Machine weight approx. 5 t Space requirement approx. 3.3 X 2 X 1.9 H m Information CNC HAAS LINING SLIDE 210 MM+ TAILSTOCK SPAENEFOEDERER

Machine Details Stock number 1105-03899 Machine type: CNC lathe - inclined bed machine Make HAAS Type HL 2 Year of construction: 1997 Control type: CNC Control Haas Storage location HAGUENAU FRANCE Country of origin Delivery time: immediately Freight base from location Technical details Turning diameter 250 mm Turning length 520 mm Control Haas Chuck diameter 204 mm Passage 76 mm Swing diameter 420 mm Speed 3400 rpm Power: 407 Nm Power: 15 KW Tool changer 12 SPEED Total power requirement 20 kW Machine weight approx. 4 t Dimensions approx. 3.3 X 2 X 1.9 H m Information CNC HAAS TURRET VDI 12 POSITION LINING DIA 204 MM TAILSTOCK

Haas HAAS UMC 750 Machining Center :::SPECIFICATIONS::: CNC Model: Haas Tool connection: iso 40 Spindle power: 22,4Kw Number of spindle revolutions: 12000 Number of tools: 40 X Shaft Travel: 762mm Y-axis stroke: 508mm Z-axis stroke: 508mm Rapid feed linear axes X Y Z: 30,5m/min Guides: roller Tilting rotary table: yes Round table type: continuous Grades rotary table: + 110 -35 Table size: 630 x 500mm Load allowed on the table: 300Kg High cooling pressure: yes Pressure value: 21bar Chip evacuator: carpet Presetting: yes Machine equipment: - P-COOL programmable refrigerant nozzle - Extended memory 750 MB - High-speed machining package - Ethernet interface - VISUAL QUICK LOAD conversational conversation programming system - Early detection of power failures request form - Auxiliary refrigerant filter system - ...

Haas VF2 CNC Vertical Machining Center 3 axis: 762x406x508 mm

HAAS CNC milling machine - Spindle speed: 1800 rpm - Spindle motor power: 5.6 kW - Total weight: approx. 2t - maximum turning length: 762 mm - maximum turning diameter: 406 mm - from a training center with a few hours Good condition fully functional can be visited and tried on site. Shipping also abroad. Sightseeing: Basically, I would like to point out that the article, in order to avoid misunderstandings, can be viewed before buying and tested under electricity. Please ask questions before purchasing to avoid ambiguity. For general questions or an appointment for a visit, I am always available at the telephone number below or above. Errors in description and prior sale excepted. VAT will be shown separately on my invoices. Shipping with freight forwarder.

Haas VF3SS CNC Vertical Machining Center All maintenance has been done regularly Machine is in very good condition It has been used only for aluminium and plastic X : 1000 mm Y : 500 mm Z : 650 mm Tool and Part measuring probe(Renishaw) Chip conveyor

Bearing number: 3421 CNC LATHE Manufacturer: Haas, Type: TL 25HE Machinen NR.: 70403, built: 2005 Specifications: Max. turn. about 760 mm dia. Max circulation diameter 405 mm dia. Turning length 860 mm Spindle bore 70 mm dia. Main spindle speed range 3400 rpm C Axis - Main spindle movement 0.001 degrees Main motor power 22 kw Tool turret with 12 stations Counter-spindle Counter spindle speeds 4000 Pr/min Operating hours Spindle 9750 hours Accessories: collet device. Materials feed 65 mm Parts Catcher Cooling water system. Chip promotion. Various accessories. Length: 2000mm, Height: , Width: 2100mm, Weight: 8000 Kg

Haas SL-10HE CNC Lathe 6 inch Without tailstock Machine is in good condition Machine can be seen in working condition

Haas ST 25 CNC Lathe Chuck size : 10 inches Machine is in good condition and regularly serviced!

Haas ST 30 CNC Lathe Chuck size : 254 mm Maximum Turning Diameter : 533 mm

Haas ST 30 CNC Lathe Chuck Size : 254 mm Maximum Part Swing : 533 mm Haas Control Unit

Machining center milling machine HAAS EC-1600ZT from 2020. The machine is in very good condition, used on a regular basis, 100% efficient.

Haas ST 20 CNC Lathe Turret capacity : 12 Axis: X-Z Live tools : NO spindle speed : 4.000 rpm Chuck size : 210 mm Max Part Swing : 533 mm

Z Axis travel: 1118 mm Turning diameter: 648 mm Spindle connection: ASA11 Chip conveyor: Yes on the whole Self-centering main spindle dimensions: 381 mm Max Bar Passage Capacity: 102 mm Spindle power Kw: 37 kw Government Unit: Fanuc Main Spindle Spindle Speed: 2400 Rotating diameter: 876 mm

Machine weight: 4000 kg Spindle drilling: 51 mm Spindle speed - range: 5000 Chuck diameter: size 8 mm X/Z Stroke:: 213/572 mm Powered tools: : 4000 rpm Horse:: YES Machine dimensions lxwxh: 3620 x 2290 x 2340 mm

Type: SL 20HE Parameters: 262 mm, 508 mm Manufacturer: HAAS Year of production / SO / GO: 2004 / - / - Description: The machine is in good technical condition, after agreement the possibility of testing. Max. turning diameter 262 mm, max. turning length 508 mm.

Machine weight: 6033 kg Total machine input:: motor 22.4 kW Spindle drilling: diameter 88.9 mm Spindle speed - range: 3400 Movement in the X/Z axis: : 239/1588 mm Max. part swing:: 533 mm Max. cut length:: 1588 mm Machine dimensions lxwxh: 5110x2290x2340 mm

Tool holders included. The machine is connected and operational, the condition can be assessed live. It is for sale due to lack of sufficient load and the need to free up space.

Z-axis stroke: 1118 mm Turning Diameter: 648 mm Spindle taper: ASA11 Chip Conveyor: Yes by conveyor Main Spindle Self Centered Dimensions: 381 mm Max Bar Passage Capacity: 102 mm Spindle Power Kw: 37 kw Steering Unit: Fanuc Main Spindle Speed: 2400 Rotating Diameter: 876 mm

Z-axis stroke: 1118 mm Turning Diameter: 648 mm Spindle taper: ASA11 Chip Conveyor: Yes by conveyor Main Spindle Self Centered Dimensions: 381 mm Max Bar Passage Capacity: 102 mm Spindle Power Kw: 37 kw Steering Unit: Fanuc Main Spindle Speed: 2400 Rotating Diameter: 876 mm