used ERMAK hvr

ERMAK CNC HVR 3100 x 13 hydraulic guillotine shears built in Turkey in 2008, are designed for cutting workpieces made of among others mild steel or stainless steel. The metal sheet with a maximum length of 3100 mm and a maximum thickness of 8 mm (plain steel) or 13 mm (stainless steel), is held during machining by 14 hydraulic clamps. The angle of the cutting blade can be freely adjusted in the range from 0.5° to 2.0°. Full control over the operation of the CNC HVR 3113 machine is guaranteed by the control panel located on the guillotine shears body with installed CYBELEC DNC 60 CNC controller, allowing programming of many different machining processes. The guillotine shears is equipped with among others new cutting blades and a foot control pedal, making the operator’s work much more comfortable and simple. The total weight of the machine is 13400 kg. The total weight of the mach ...

Ermak CNC HVR 3100 x 10 CNC Guillotine Shear Machine is in very good condition

sheet width:3100 mm plate thickness:6 mm distance between columns:3100 mm no. of strokes:16 - 24 Hub/min cutting angle:0,5 - 1,5 ° down holder:14 Stk. throat:350 mm table height:900 mm oil volume:150 l total power requirement:11 kW weight of the machine ca.:7060 kg dimensions of the machine ca.:4100 x 2200 x 2190 mm 1 brandnew hydraulic shear ERMAK CNC HVR 3100-134 with following equipment: - CNC controlled hydraulic blade gap adjustment system - CNC controlled cutting angle adjustment system - portable foot pedal - CNC controlled motorized backgauge system - front support arms with t-slot, ruler and flip stop - squaring arm - scales with metric and inches - cutting line illumination and shadow line - emergency stops - swing up backgauge - central lubrication system - front finger protection - rear sliding plates - front sliding plates with ball bearing on the table - 350 mm throat dept ...

sheet width: 3100 mm plate thickness: 6,0 mm distance between columns: 3.100 mm down holder: 14 Stück no. of strokes: 16 - 24 Hub/min oil volume: 150 ltr. cutting angle: 0,5 - 1,5 ° thickness at Niro-steel: 4,0 mm column arm: 350 mm engine output: 11,0 kW weight of the machine ca.: 7.060 kg range L-W-H: 4100 x 2200 x 2190 mm -------------------------------------------------- electr. / hydraulic CNC guillotine shears - guided by a backdrop * with CYBELEC CNC touch screen control * with electr. / hydr. Cutting gap and cutting angle adjustment -------------------------------------------------- Furnishing: - CNC guiding guillotine shears - with electr. / hydr. Cutting gap and cutting angle adjustment - CYBELEC CNC touch screen controller, model CybTouch 8 * Backgauge preselection - X axis * Cutting gap adjustment * Number of pieces * Cutting length limitation * Material preselection, incl ...

Cutting length : 3000 mm Max. cutting thickness : 13 mm Machine is in good condition

sheet width: 3100 mm plate thickness: 6,0 mm distance between columns: 3.100 mm down holder: 14 Stück no. of strokes: 16 - 24 Hub/min oil volume: 150 ltr. cutting angle: 0,5 - 1,5 ° thickness at Niro-steel: 4,0 mm column arm: 350 mm engine output: 11,0 kW weight of the machine ca.: 7.060 kg range L-W-H: 4,1 x 2,2 x 2,19 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

sheet width: 4100 mm plate thickness: 10,0 mm thickness at Niro-steel: 6,0 mm down holder: 28 Stück no. of strokes: 18 Hub/min oil volume: 260 ltr. cutting angle: 0,5 - 2 ° control: CYBELEC Cybtouch engine output: 22,0 kW back stop - adjustable: 1000 mm range L-W-H: 6100 x 2580 x 2460 mm weight: 15.100 kg. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

sheet width: 3100 mm plate thickness: 13,0 mm thickness at Niro-steel: 8,0 mm down holder: 14 Stück no. of strokes: 11 - 20 Hub/min oil volume: 310 ltr. cutting angle: 0,05 - 2,0 ° throat: 350 mm table height: 900 mm total power requirement: 22,0 kW weight of the machine ca.: 13.300 kg range L-W-H: 5.110 x 2.570 x 2.400 mm -------------------------------------------------- heavy electr. / hydraulic CNC guillotine shears - guided by a backdrop * with CYBELEC CNC touch screen control * with electr. / hydr. Cutting gap and cutting angle adjustment -------------------------------------------------- Furnishing: - CNC guillotine guiding shears - with electr. / hydr. Cutting gap and cutting angle adjustment - CYBELEC CNC touch screen controller, model CybTouch 8 * Backgauge preselection - X axis * Cutting gap adjustment * Number of pieces * Cutting length limitation * Material preselection,  ...

sheet width: 3100 mm plate thickness: 6 mm rear stop: 1000 mm throat: 350 mm cutting angle: 0,5 - 1,5 ° down holder: 14 Stk no. of strokes: 16 - 24 Hub/min total power requirement: 11 kW dimensions of the machine ca.: 4100 x 2200 x 2190 mm weight of the machine ca.: 7060 kg -------------------------------------------------- --------- heavy electr. / hydraulic CNC swing cut shears * with CYBELEC CNC touch screen control * with electr. / hydr. Kerf adjustment -------------------------------------------------- --------- Furnishing: - CNC electr. / hydraulic swing cut shears - CYBELEC CNC touch screen controller, model CybTouch 8 * Backgauge preselection - X axis * Cutting gap adjustment * Number of pieces * Cutting length limitation * Material preselection, including sheet thickness * Cutting line lighting - motorized backgauge, travel = 1,000 mm (X axis) * on ball screws * autom. Can be f ...

Machine weight: 28800 kg Max. cutting length: 6100 mm Max. metal sheet thickness: 10 mm Unloading in racks: 350 mm Maximum number of strokes per minute: 8-13 min

3100 x 6 mm CNC Cybelec with pneum. Sheet metal holding approx. 8000 kg

sheet width: 3100 mm plate thickness: 6 mm rear stop: 1000 mm throat: 350 mm cutting angle: 0,5 - 1,5 ° down holder: 14 Stk no. of strokes: 16 - 24 Hub/min total power requirement: 11 kW dimensions of the machine ca.: 4100 x 2200 x 2190 mm weight of the machine ca.: 7060 kg -------------------------------------------------- --------- heavy electr. / hydraulic CNC swing cut shears * with CYBELEC CNC touch screen control * with electr. / hydr. Kerf adjustment -------------------------------------------------- --------- Furnishing: - CNC electr. / hydraulic swing cut shears - CYBELEC CNC touch screen controller, model CybTouch 8 * Backgauge preselection - X axis * Cutting gap adjustment * Number of pieces * Cutting length limitation * Material preselection, including sheet thickness * Cutting line lighting - motorized backgauge, travel = 1,000 mm (X axis) * on ball screws * autom. Can be f ...

welding line for galvanized and black pipes.

Work area: 1.5 x 3 m or 2 x 4 m Standard equipment: self-focusing cutter 2 kW laser cooling unit, astringent and purifying air system, security, automatic twin transfer table, CAD/CAM software (Metalix, Lantek, Almacam) control unit with 15 "-touch screen, conveyor belt, warning light, nozzle set All CAD/CAM programs such as Lantek, Metalix and Almacam are usable. Options: Linear drive technology, laser light source optionally available with 3, 4 or 6 KW Sampling device, safety light barrier, air conditioning for automation Panel. 24 months warranty The price refers to a 1.5 x 3 m facility with 2 KW

Working range: 1.5 x 3m, or 2 x 4m Standard equipment: self-focusing cutting head 2kW laser, cooling unit, cleaning and drying air system,safety cabinet, automatic twin transfer table,CAD/CAM software (Lantek, Metalix, Almacam)Control device with 15 touchscreen,foerderband,warning light,duesenset Options: linear drive technology, laser light source optional with 3, 4 or 6 KW removal device, safety light barrier,air conditioning for automation panel. 24 months manufacturer's warranty The price refers to a 1.5 x 3m system with 2 KW; ready for use

ERMAKSAN LASERMAK 6000 6X2 laser cutter was produced in 2014. Technical parameters: – laser source: 6000 W CO2-laser GE Fanuc C6000i-Model C – RF-excitation: 2 MHz – power stability: ± 2% (power monitor) – laser wave length: 10.6 μM – beam mode: Fanuc Low Order Mode – laser shutter: mechanical safety shutter – laser gas composition: CO2 / He / N2 – gas consumption by laser: 20 l / h – cooling water flow rate: 250 l / min – maximum cutting capacity: mild steel 25 mm (during tests the maximum achieved: 30 mm), stainless steel 15 mm, aluminum 12 mm - machine activation time: 22899 h - working time: 10122 h - cutting time: 8429 h – total energy requirement: 100-120 kW – cutting head focal length: 5 “-7” -10 “inch – maximum worksheet size: 6150 x 2000 mm – maximum burden capacity: 4000 kg – machine axes: 5 axes [X, Y, Z, U (X2), V] � ...

sheet width: 3100 mm plate thickness: 10 mm cutting angle: 2 ° down holder: 14 Stück no. of strokes: 13 Hub/min throat: 350 mm oil volume: 260 l total power requirement: 22 kW weight of the machine ca.: 10.550 kg dimensions of the machine ca.: 4000x2250x2050 mm Domestic equipments: - Hydraulic swing cut sheet metal shears - Touch screen controller with digital display for backgauge - automatic kerf adjustment via the control - Backgauge control 1000 mm travel with recirculating ball screws - Vibration cutting machine with kerf adjustment - 2 support arms - 1 side stop - Photocell behind the machine - Cutting length limit - cut line lighting - Chrome steel knife - Ball rolls in the table - hinged finger guard with limit switch - Footswitch - CE mark / Declaration of Conformity - Bed instructions in German The data for this ad was created with ModulMWS - the software solution of LogoTe ...

Key data: 200 Delem, 4100 DA 70

Capacity: 200 t Folding length: 4100 mm CNC Brand: Delem CNC Model: DA 70 Max. bending length:        4.100mm Distance between column:    3.600mm Max. pressing force:        200T Dis. Beam – Table:          435mm Beam stroke:                200mm Table Width:                225mm Troth beam:                 4.090mm Approch speed:              100mm/min. Working speed:              10mm/min. Return speed:               90mm/min. Adjustment X-Axis back gauge:1.000mm Number of controlled axis:  4 Power:                  & ...

sheet width: 3100 mm plate thickness: 6 mm voltage: 380 V control: CYBELEC CybTouch down holder: 14 Stück cutting angle: 1,2 ° total power requirement: 11 kW weight of the machine ca.: 5700 kg dimensions of the machine ca.: 4000x2100x1640 mm Accessories / equipment: - CYBELEC Cybtouch touch screen controller - NC controller for backgauge, gap adjustment, number of pieces, cutting length - 1 side stop with scale, T-groove and tilting cam - 2 front support arms - cut line lighting - Cutting gap adjustment - Cutting length limit - Folding finger guard with limit switch - motorized back gauge 1.000 mm travel - Ball screws - Photocell behind the machine - Ball rolls in the table - SIEMENS electrical system - BOSCH / HOERBIGER hydraulic system - Footswitch - CE mark / Declaration of Conformity - Operating manual: Machine and control in German The data for this ad was created with ModulMWS  ...

sheet width: 3100 mm plate thickness: 6 mm voltage: 380 V control: CYBELEC CybTouch down holder: 14 Stück cutting angle: 1,2 ° total power requirement: 11 kW weight of the machine ca.: 6.300 kg dimensions of the machine ca.: 4000x2100x1640 mm Equipment: - CNC electr. / hydraulic swing cut shears - CYBELEC CNC touch screen controller, model CybTouch 8 * Backgauge preselection - X axis * Cutting gap adjustment * Quantity * Cutting length limitation * Material preselection, including sheet thickness * Cutting line lighting - motorized backgauge, travel = 1,000 mm (X axis) * on ball screws * autom. can be folded up at max. Traverse path, for longer cuts - 1x side stop - 2x front support arms - Ball casters in the front support table - hinged finger protection, with safety switch - BOSCH / HOERBIGER hydraulic system - SIEMENS electrical system - light barrier behind the machine (safety devi ...

sheet width: 3100 mm plate thickness: 13 mm thickness at Niro-steel: 8 mm control: CYBELEC CybTouch down holder: 14 Stück cutting angle: 2,0° ° no. of strokes: 11 Hub/min voltage: 380 V total power requirement: 22 kW weight of the machine ca.: 12.100 kg dimensions of the machine ca.: 4000x2240x2235 mm Accessories / equipment: - CYBELEC-CybTouch control panel with digital display for backgauge - hydr. Cutting gap adjustment via control - 1 side stop - 4 front lifting arms - cut line lighting - Cutting gap adjustment - Cutting length limit - Ball rolls in the table - motorized back gauge 1.000 mm travel with recirculating ball screws,    automatically start at the end of the stop - Shear knives for stainless steel cuts as standard - Photocell behind the machine - SIEMENS electrical system - BOSCH / HOERBIGER hydraulic system - Footswitch - Operating instructions in German The data f ...

Capacity: 200 t Folding length: 3100 mm CNC Brand: Delem CNC Model: DA 70 in 4 Axis MAKE   ERMAK TYPE    CNC HAP YEAR    2007 SPECIFICATIONS Controll   Delem DA 70 in 4 Axis Pressbrake / Folding / Mech. / Hydr.   Pressbrake Hydraulic / Mechanical    Hydraulic Bending length   3100 mm Distance between column  2550 mm Press force  200 Ton Throat        400 mm Stroke   200 mm Die height    435 mm Backgauge stroke X in mm   750 mm Number off controlled axis  4 Power   15 kW DIMENSIONS Length   4550 mm Width    2250 mm Height   2850 mm Ermak cnc pressbrake

pressure: 60 t square edge steel: 35,0 mm round bar steel: 40,0 mm L-beam: 120 mm punching cross-cut in cmm: 28 in 15 mm throat: 220 mm flat steel: 300 x 15 mm oil volume: 45 ltr. total power requirement: 4,0 kW weight of the machine ca.: 1.250 kg. Dimensions (HxWxD): 1510 x 590 x 1570 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

pressure: 135 t chamfer lenght: 4100 mm distance between columns: 3600 mm column arm: 410 mm ram stroke speed: 200 mm/sec return speed: 190 mm/sec work speed: 12,0 mm/sec work stroke: 275 mm dayligth: 550 mm oil volume: 300 ltr. table height: 900 mm voltage: 400 Volt total power requirement: 15,0 kW weight: 10.800 kg range L-W-H: 5100 x 2100 x 2850 mm -------------------------------------------------- HIGH-SPEED hydraulic press brake with increased installation height increased cylinder stroke enlarged projection -------------------------------------------------- Furnishing: - DELEM CNC control model DA 66T - swiveling touchscreen control unit - 7 controlled axes: Y1 - Y2 - X - R - Z1 and Z2, as well as CNC crowning - electr. controlled backgauge X-axis = 800 mm / R-axis = 250 mm - on ball screws - controlled electr. Stop fingers Z1 + Z2 - split upper deer foot tool Roleri 135.85.R08, S ...

pressure: 160 t chamfer lenght: 3100 mm distance between columns: 2600 mm column arm: 250 mm ram stroke speed: 90 mm/sec return speed: 80 mm/sec work speed: 7,5 mm/sec work stroke: 160 mm dayligth: 395 mm oil volume: 200 ltr. table height: 900 mm back stop - adjustable: 800 mm voltage: 400 Volt total power requirement: 11,0 kW weight: 7.524 kg range L-W-H: 4250x1900x2550 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.