128,994 used machines on RESALE, but how to find them? Machine Search
Important and distinguishing design features of the RaptorX SL steel base machine RaptorX-SL2200/S20 The application range of the RaptorX- SL CNC milling machine is extremely wide due to the adjustable work surface height (variable bridge clearance: 150mm, 300mm or 400mm) plus the travel range of the Z axis of 300mm (at no extra cost). The Z axis stability is excellent, allowing you to work as accurately on large 3D objects as one can on flat sheet materials. Use the system as a plasma cutting system or a water jet cutting system, appropriate accessories are available. It is possible to work on work-pieces up to a height of 850mm (steel cabinets etc.) or three-dimensional objects up to a height of approx. 400mm (with 400m long milling cutter). This capability is unusual for machines of this size and mold makers usually use a layered construction method to produce ...
Important and distinguishing design features of the RaptorX SL CNC Router steel base machine RaptorX-SL2200/S15 The application range of the RaptorX- SL CNC milling machine is extremely wide due to the adjustable work surface height (variable bridge clearance: 150mm, 300mm or 400mm) plus the travel range of the Z axis of 300mm (at no extra cost). The Z axis stability is excellent, allowing you to work as accurately on large 3D objects as one can on flat sheet materials. Use the system as a plasma cutting system or a water jet cutting system, appropriate accessories are available. It is possible to work on work-pieces up to a height of 850mm (steel cabinets etc.) or three-dimensional objects up to a height of approx. 400mm (with 400m long milling cutter). This capability is unusual for machines of this size and mold makers usually use a layered construction metho ...
Specifications / Technical Data S-1400/T CNC-Router and CNC-Engraver / Engraving Machine (Attention: Pictures are showing the type with trapezium spindles, thats the only different to the t-series ) With the purchase of the T-variation of High-Z CNC-router you get a proven technology with a certain icing of the cake in TÜV-certified quality. High-Z/T cnc-routers are conceived for once more precision (repetition precision approx. 0,02mm) and especially for higher traverse speed. Because of the used ball screws the High-Z/T cnc-machines achieves a fantastic precision and an almost unmeasurable back lash of approx. 0,01mm. At the same time there are high traverse speeds up to approx. 108mm / sec. ( 6.500 mm/min ) possible. With this 3D-cnc-machine you're able to carry out an engrave and mill speeds of approx. 4500 mm/min. and express travels up to 6500mm/min. Here's a video on ...
Important and distinguishing design features of the RaptorX SL steel base machine The application range of the RaptorX- SL CNC milling machine is extremely wide due to the adjustable work surface height (variable bridge clearance: 150mm, 300mm or 400mm) plus the travel range of the Z axis of 300mm (at no extra cost). The Z axis stability is excellent, allowing you to work as accurately on large 3D objects as one can on flat sheet materials. Use the system as a plasma cutting system or a water jet cutting system, appropriate accessories are available. It is possible to work on work-pieces up to a height of 850mm (steel cabinets etc.) or three-dimensional objects up to a height of approx. 400mm (with 400m long milling cutter). This capability is unusual for machines of this size and mold makers usually use a layered construction method to produce large 3D objects. ...
Specifications / Technical Data S-400/T CNC-Portal-Router / CNC-Engraving machine with TÜV certification With the purchase of the T-variation of High-Z cnc-router you get a proven technology with a certain icing of the cake in TÜV-certified quality. High-Z/T cnc-routers was conceived for once more precision (repetition precision approx. 0,02mm) and especially for higher traverse speed. Because of the used ball screws the High-Z/T 3D-cnc-engravers achieves a fantastic precision and an almost unmeasurable back lash of approx. 0,01mm. At the same time there are high traverse speeds up to approx. 108mm / sec. ( 6.500 mm/min ) possible. With this cnc-machines you're able to carry out an engrave and mill speeds of approx. 4500 mm/min. and express travels up to 6500mm/min. Here's a video on a unloaded drive with the new High-Z / T. This 3D-milling-machine series is usable in the ...
Why manufacture small parts on large, expensive CNC machining centers when it does a small CNC machine for a fraction of the price as fast and true to size ? Brass, copper , steel, stainless steel and many other materials can be processed . See information and seek non-binding offer or view a demonstration at our premises , personalized with your material and your record !; ready for operation
Specifications / Technical Data S-400 CNC Router / CNC milling machine / Engraver With the High-Z CNC-router / engraver you purchase an allround talent in TÜV-certified quality. If you want to clampand fix complex workpieces on the worksurface, or, or, or clamp work-pieces in a high bench vise (the cnc milling machine sits on a frame-construction, is driven by 2 motors and therefore allows to be positioned above a piece to be processed). Or if you simply want to do engraving- or drillingjobs.you can work on a flat surface, with a pieces of sheet MDF fixed to it. Plane it once and you will be able to work with a precision of +-0,02 mm depth. All cnc-machines are being delivered with black energy-chains on all axis, which allows a better cabling management. Also, all cnc milling / engraving machines are equipped with an emergency stop button. An additional emergency stop you fin ...
Specifications / Technical Data S-1000 CNC-Router and CNC-Engraver This is the biggest machine of our High-Z cnc-router series. With external dimensions of approx. 1350x800mm it is still very handy. With the High-Z 3D-cnc-routers you purchase an allround talent in TÜV-certified quality. If you want to clampand fix complex workpieces on the worksurface, or, or, or clamp work-pieces in a high bench vise (the cnc-machine sits on a frame-construction, is driven by 2 motors and therefore allows to be positioned above a piece to be processed). Or if you simply want to do engraving- or drillingjobs.you can work on a flat surface, with a pieces of sheet MDF fixed to it. Plane it once and you will be able to work with a precision of +-0,02 mm depth. All cnc-machines are being delivered with black energy-chains on all axis, which allows a better cabling management. Also, all cnc-milli ...
Important and distinguishing design features of the RaptorX SL steel base machine The application range of the RaptorX- SL CNC milling machine is extremely wide due to the adjustable work surface height (variable bridge clearance: 150mm, 300mm or 400mm) plus the travel range of the Z axis of 300mm (at no extra cost). The Z axis stability is excellent, allowing you to work as accurately on large 3D objects as one can on flat sheet materials. Use the system as a plasma cutting system or a water jet cutting system, appropriate accessories are available. It is possible to work on work-pieces up to a height of 850mm (steel cabinets etc.) or three-dimensional objects up to a height of approx. 400mm (with 400m long milling cutter). This capability is unusual for machines of this size and mold makers usually use a layered construction method to produce large 3D objects. ...
Specifications / Technical Data S-720 CNC-Router / CNC-Engraver / Milling machine With the High-Z cnc router and engraving machine you purchase an allround talent. If you want to clampand fix complex workpieces on the worksurface, or, or, or clamp work-pieces in a high bench vise (the cnc milling machine sits on a frame-construction, is driven by 2 motors and therefore allows to be positioned above a piece to be processed). Or if you simply want to do engraving- or drillingjobs.you can work on a flat surface, with a pieces of sheet MDF fixed to it. Plane it once and you will be able to work with a precision of +-0,02 mm depth. All cnc routers / milling machines are being delivered with black energy-chains on all axis, which allows a better cabling management. Also, all cnc milling machines are equipped with an emergency stop button. An additional emergency stop you find ...
Specifications / Technical Data S-400 CNC Router / CNC milling machine / Engraver With the High-Z CNC-router / engraver you purchase an allround talent (optional WIN PCNC Economy, USB or professional). If you want to clampand fix complex workpieces on the worksurface, or, or, or clamp work-pieces in a high bench vise (the cnc milling machine sits on a frame-construction, is driven by 2 motors and therefore allows to be positioned above a piece to be processed). Or if you simply want to do engraving- or drillingjobs.you can work on a flat surface, with a pieces of sheet MDF fixed to it. Plane it once and you will be able to work with a precision of +-0,02 mm depth. All cnc-machines are being delivered with black energy-chains on all axis, which allows a better cabling management. Also, all cnc milling / engraving machines are equipped with an emergency stop button. An additional ...
Specifications / Technical Data S-400/T CNC-Portal-Router / CNC-Engraving machine Grabite marble soapstione slate engraving photo engraving, milling .. With the purchase of the T-variation of High-Z cnc-router you get a proven technology with a certain icing of the cake. High-Z/T cnc-routers was conceived for once more precision (repetition precision approx. 0,02mm) and especially for higher traverse speed. Because of the used ball screws the High-Z/T 3D-cnc-engravers achieves a fantastic precision and an almost unmeasurable back lash of approx. 0,01mm. At the same time there are high traverse speeds up to approx. 108mm / sec. ( 6.500 mm/min ) possible. With this cnc-machines you're able to carry out an engrave and mill speeds of approx. 4500 mm/min. and express travels up to 6500mm/min. Here's a video on a unloaded drive with the new High-Z / T. This 3D-milling-machi ...
Specifications / Technical Data S-720/T CNC-Engraving-Machine / Milling machine / CNC-Router With the purchase of the T-variation of High-Z CNC-router you get a proven technology with a certain icing of the cake in german TÜV-certified quality. High-Z/T 3D-cnc-engraver was conceived for once more precision (repetition precision approx. 0,02mm) and especially for higher traverse speed. Because of the used ball screws the High-Z/T cnc milling machines achieves a fantastic precision and an almost unmeasurable back lash of approx. 0,01mm. At the same time there are high traverse speeds up to approx. 108mm / sec. ( 6.500 mm/min ) possible. With this cnc-machines you're able to carry out an engrave and mill speeds of approx. 4500 mm/min. and express travels up to 6500mm/min. Here's a video on a unloaded drive with the new High-Z / T. This cnc-machine series is usable in the indus ...
The application range of the RaptorX- SL CNC milling machine is extremely wide due to the adjustable work surface height (variable bridge clearance: 150mm, 300mm or 400mm) plus the travel range of the Z axis of 300mm (at no extra cost). The Z axis stability is excellent, allowing you to work as accurately on large 3D objects as one can on flat sheet materials. Use the system as a plasma cutting system or a water jet cutting system, appropriate accessories are available. It is possible to work on work-pieces up to a height of 850mm (steel cabinets etc.) or three-dimensional objects up to a height of approx. 400mm (with 400m long milling cutter). This capability is unusual for machines of this size and mold makers usually use a layered construction method to produce large 3D objects. Considering our new concept of working with an "invisible" motor for the X-axis an ...
CNC Router and 3D engraving machine T-Rex 0712: Equipment / product data CNC-milling machine type High-Z/TRex series: Drive: 3 brushless brand stepping engines with 4,5 ampere. Possibility of sliding through long and up to 120mm high materials, no belt drive at the ende of the X axis! Linear guide on all axis by HIWIN / THK ! Multiple ball-bearing ball-screw spindle on all axes, proprietary brand! Rapid traverse max. ca. 17.000 mm/min Operating speed max. ca. 12.000 mm/min Technical definition X/Y : 0,005mm (1/10 Schritt); Z: 0,0025mm Backlash maximal ca. +/- 10µm (0,010 mm) Repeat accuracy: ca. 0,01 mm Clampin surface of grooven panel / T-slot table1650 x 880 mm Travels: X=1200mm; Y=700mm; Z= 130 mm Non-contact reed sensors / reference switches / limit switches on all axes Double secured emergency-stop button Energy chains for a clean cable routing Total dimensions ...
The application range of the RaptorX- SL CNC milling machine is extremely wide due to the adjustable work surface height (variable bridge clearance: 150mm, 300mm or 400mm) plus the travel range of the Z axis of 300mm (at no extra cost). 3D engraving, bas reliefs in marble etc. Create and mill, what ever you want . The Z axis stability is excellent, allowing you to work as accurately on large 3D objects as one can on flat sheet materials. Use the system as a plasma cutting system or a water jet cutting system, appropriate accessories are available. It is possible to work on work-pieces up to a height of 850mm (steel cabinets etc.) or three-dimensional objects up to a height of approx. 400mm (with 400m long milling cutter). This capability is unusual for machines of this size and mold makers usually use a layered construction method to produce large 3D objects. Considering our ...
Equiptment / product data CNC-milling machine type High-Z/TRex series / 1224 Drive: 3 brushless brand stepping engines with 4,5 ampere. Possibility of sliding through long and up to 120mm high materials, no belt drive at the ende of the X axis! Linear guide on all axis by HIWIN / THK ! Multiple ball-bearing ball-screw spindle on all axes, proprietary brand! Rapid traverse max. ca. 12.000 mm/min Operating speed max. ca. 8.000 mm/min Technical definition X/Y : 0,005mm (1/10 Schritt); Z: 0,0025mm Backlash maximal ca. +/- 10µm (0,010 mm) Repeat accuracy: ca. 0,01 mm Clampin surface of grooven panel / T-slot table 2800 x 1340 mm Travels: X=2400mm; Y=1200mm; Z= 130 mm Non-contact reed sensors / reference switches / limit switches on all axes Double secured emergency-stop button Energy chains for a clean cable routing Total dimensions with engines : LxBxH ca. 3070 x 1800 x ...
Router FL mGuard RS2000 TX/TX VPN, 2700642, Phönix, mint condition -40% Special price If you have a VAT number, we will gladly issue you an invoice without VAT. Top condition like a demonstration unit The part was removed from a new machine that is proven to have run only about 250 hours of operation. 6 months warranty We give you 6 months warranty for these goods from the date of invoice. In case of any defect, which is not the fault of the seller, the goods can be returned. We will refund the buyer only the product price paid to us. Updating in case of digital components is excluded. Also excluded is liability for direct and indirect consequential damages. Our terms and conditions apply, see our website. Austrian law applies without exception and court location St. Pölten.
Industrial Ethernet switch, network switch, LAN switch, rail switch, router -Cisco Router: 1841 V05 -Voltage: 100/240 V -Dimensions: 275/480/H45 mm -Weight: 3.1 kg
Industrial Ethernet Switch, Netzwerk Switch, Lan- Switch, Rail Switch, Router, Ethernet Security Router -Cisco: 881 Ethernet Security Router -Dimesinons: 250/320H45 mm -Weight: 2,4 kg
Industrial Ethernet Switch, Network Switch, Lan Switch, Rail Switch, Router, Ethernet Security Router -Cisco: C881-K9 Ethernet Security Router -Dimensions: 250/320H45 mm -Weight: 2.4 kg
Industrial Ethernet Switch, Netzwerk Switch, Lan- Switch, Rail Switch, Router, Ethernet Security Router -Cisco: 1812/K9 V07 Ethernet Security Router -Dimension: 240/325H45 mm -Weight: 2,4 kg
Industrial Ethernet Switch, Network Switch, Lan Switch, Rail Switch, Router, Ethernet Security Router -Manufacturer: NetModule, WLRouter type NB1600-UW with 2 antennas -Antennas: WTG14, 114116 DM1 / WTG14, 114118 DM3 -Overall dimensions: 340/200/H135 mm -Weight: 1.1 kg
Industrial Ethernet Switch, Network Switch, Lan Switch, Rail Switch, Router, Ethernet Security Router -Manufacturer: ewon, Router T -Type: EC61330 00MA/S COSY 131 -Voltage: 12-24 V -Number: 2 routers available -Price: per piece -Dimensions: 110/100/H45 mm -Weight: 0.2 kg/pc.
Industrial Ethernet Switch, Network Switch, Lan Switch, Rail Switch, Router, Ethernet Security Router -Manufacturer: MB, Router mbnet mini -Type: MDH 860 -Voltage: 12-24 V -Dimensions: 95/70/H35 mm -Weight: 0.4 kg
Router, router, hand router -Handover: in current condition as seen -Accessories: collet, but without clamping nut, depth stop -Speed: 12000 rpm -Rated consumption: 800 watts -Connection: 230 volts -Dimensions: 320/320/H320 mm -Weight: 12kg
Automatic copying device: x ja/nein converter: x ja/nein turning speeds: 11000 U/min Number of knives: NA z= Diameter: NA mm Length: mm Shank diameter: mm Motor output: kW Dimensions (L/W/H): mm Vertikal stroke: mm Table dimensions: mm Dust suction hood: mm Diameter of the saw arbor: mm Length of the rolling table: mm Sawblade tiltable: ° milling stroke vertical: mm total power requirement: kw Weight: kg Spindle diameter: mm Length of the planing table: mm Number of heads vertical: St. Number of heads horizontal: St. Number of milling agregates: St. Number of knives: St. Number of sanding units: st. Number of spindles: St. Number of spindle head vertical: St. Number of spindles head horizontal: St. Number of milling spindles: St. : St. Number of tools: St. Working width: mm Year: Speed of boring spindles: U/min. Required air-pressure: bar Dowel insertingunits: St. Electrical height adj ...
Inv. Num. : 8715 Type:- Producer: VOLTER Created: 2022 Parameters: Work table length: 2200 mm Work table width: 1610 mm Spindle drive power: 7.5 kW Maximum vertical spindle speed: 24000 1/min Lifting height: 160-180 mm Machine length: 3300 mm Machine width: 2100 mm Machine weight: 1200 kg Equipment: 4-zone vacuum table T-slot clamping system Spindle air cooling Semi-automatic tool clamping Laser starting point indication Wireless remote control CAN SW ISO 30 Terminals T12 Terminal Set Workpiece Probe
This 3-axis BLUE ELEPHANT ELECNC 2200x3700 was manufactured in 2021. It features a working area of 2200 mm by 3700 mm, a 9.6 kW HSD ATC spindle, and speeds ranging from 6000 to 24,000 RPM. Equipped with a Taiwan SYNTEC 60WE control system and Japanese YASKAWA 850W servomotors, consider the opportunity to buy this BLUE ELEPHANT ELECNC 2200x3700 CNC router. Contact us for more information about this machine.
This 3-axis QUICK CNC UE-481 was manufactured in 2025. It features a 1300 x 2500 x 200 mm working area, a 9 kW high-performance spindle, and a linear tool changer. The vacuum table has 6 zones, complemented by a Becker 250 m³/h vacuum pump. It includes a 3-sided safety fence with a front light barrier, tools, and dust extraction. If you are looking to get high-quality CNC routing capabilities consider the QUICK CNC UE-481 machine we have for sale. Contact us for more information.
This 3-axis MASTERWOOD Project 315 was manufactured in 2007. A robust CNC router with a working size of approximately 120 x 280 cm, it features a 12-slot changer and a powerful vacuum pump rated at 90 m3. The computer was updated in 2023, and the axis control was renewed in 2018. If you are looking to get high-quality milling capabilities, consider the MASTERWOOD Project 315 machine we have for sale. Contact us for more information.
This 3-axis KOMPAS F 2030 Industry was manufactured in 2019 and features a 3000x2000mm working area. It includes an automatic Mach3 CNC control for feeding, sawing, and milling, with a maximum speed of 10,000 mm/min. The machine is equipped with a 3 kW milling motor, angle-adjustable circular saw, pneumatic clamping, and a chip extraction system. If you are looking to get high-quality milling capabilities, consider the KOMPAS F 2030 machine we have for sale. Contact us for more information.
This 3-axis PELCO MECCANICA CLOUD was manufactured in 2015. It features a working area of 2000 Ã 1000 mm and a Z-axis travel of 250 mm. The machine is equipped with a 12-position tool changer and an electrospindle speed ranging from 2000 to 18,000 rpm. If you are looking to get high-quality machining capabilities, consider the PELCO MECCANICA CLOUD CNC router we have for sale. Contact us for further details.
Including: drill vise with jaw width 110 mm and opening 120 mm/ including: 2 pressure gauges vice and transport trolley Auction-ID: A1-46698-311
Reference: Common - Lot 44 Dimensions: 500mmx400mmx300mm Weight: approx. 50kg Auction-ID: A7-46763-158
MARTIN T20 Digital Router Motor 5–6 kW (option 7.5/9.5 kW). Electric height and opening adjustment. Stroke 150 mm. Speeds 3000/4500/6000/9000 rpm (continuously variable option 1000–12000). Table opening Ø72–305 mm, option Ø70–220 mm. Suction Ø120 mm. Noise: 76.6 dB (vacuum) / 81.7 dB (machining). Weight approx. 860 kg. Auction-ID: A1-46801-82
CNC nesting machining centre manufactured in 2021. This FORMAT4 Profit H80 21.31 features a working area of 3090 x 2100 mm and a powerful 10 kW spindle with speeds up to 24,000 rpm. It includes an 8-spindle drilling head and a 15-position tool changer. If you are looking to get high-quality nesting capabilities, consider the FORMAT4 Profit H80 21.31 machine we have for sale. Contact us for further details.
Code: 0309 Brand: COSMEC Model: KV 1000/C Copying Router Technical data: Clearance from upright to spindle center mm 1000 Spindle vertical run mm 115 Spindle speed : 12000/18000 rpm Worktable dimensions mm 900 x 1000 Overall dimensions: mm 1850 x 1050 x 1800 h Weight kg 1000
CNC boring- routering machine Brand: Vitap Type: K3 New machine Throughfeed process from the bottom and automatic panel return to the operator. Develop a new individual class: - With this machine you can do grooves and drill processings as well as different milling works, from simple edge milling to the milling of forms and letters. - There are no limits for your creativity Easy beginn with CNC programming: - TPA makes it easy: drillings, grooves, linear millings, form millings or the millings of letters - The CAD Software shows the processings on a virtual workpiece - Good overview about all processings on the single sides of the workpieces - Mirror function for parallel processings on other positions - Choose reference points via entering the exact position or just via click on the virtual workpiece Vitap Bar Nesting - efficient and time saving - This patent ...
This 3-axis SCM Accord 20 CNC router was manufactured in 2010. It features a working area with dimensions of 4250 mm in the X-axis and 2280 mm in the Y-axis, making it suitable for nesting production and wood processing. The machine includes a powerful electrospindle with a speed range of 600 to 24,000 rpm and a side tool magazine with 10 positions. If you are looking to get high-quality milling capabilities, consider the SCM Accord 20 CNC router we have for sale. Contact us for further details.
This 5-axis BIESSE Rover C 9.65 was manufactured in 2006. It features a working area of 6200 mm in X and up to 1935 mm in Y, with a Z-axis of 275 mm. The machine is equipped with a powerful 8 kW spindle and a tool changer with 22 positions. If you are looking to get high-quality CNC routing capabilities, consider the BIESSE Rover C 9.65 machine we have for sale. Contact us for further details.
This 5-axis BIESSE Rover A 1232 was manufactured in 2021. It features a working area of 3140 mm in the X-axis, 1270 mm in the Y-axis, and a Z-axis travel of 245 mm. The machine is equipped with an electrospindle power of 13.2 kW and a maximum tool diameter of 113 mm. If you are looking to get high-quality CNC routing capabilities, consider the BIESSE Rover A 1232 machine we have for sale. Contact us for further details.
CISCO - ASR 9000 Series ASR-9006 ROUTER (03-2019) Cisco 9000 Aggregation Services Routers are primarily intended for building networks in the service provider environment Auction-ID: A1-47049-152
maximum number of results exceeded
please refine your search
10 € 
