| Description: |
STONE 3D-CNC ROUTER/ MACHINE ENGRAVER CNC-STEP High-Z S-720/T
Specifications / Technical Data S-720/T
CNC-Engraving-Machine
/ Milling machine / CNC-Router
With the
purchase of the T-variation of High-Z CNC-router you get a proven
technology with a certain icing of the cake in german TÜV-certified
quality. High-Z/T 3D-cnc-engraver was conceived for once more
precision (repetition precision approx. 0,02mm) and especially for
higher traverse speed.
Because of the used ball
screws the High-Z/T cnc milling machines achieves a fantastic
precision and an almost unmeasurable back lash of approx. 0,01mm. At
the same time there are high traverse speeds up to approx. 108mm /
sec. ( 6.500 mm/min ) possible.
With this
cnc-machines you're able to carry out an engrave and mill speeds of
approx. 4500 mm/min. and express travels up to 6500mm/min.
Here's a video on a unloaded drive with the new High-Z /
T.
This cnc-machine series is usable in the industrial
field as well as for works like engraving, milling, drilling,
measuring, cutting and measuring out systems as for example adhering
of adhesive on 3D outlines.
All
cnc-milling-machines are being delivered with black energy-chains on
all axis, which allows a better cabling management. Also, all
cnc-engraving-machines are equipped with an emergency stop button. An
additional emergency stop you find in front of the controller.
Basic equipment of all High-Z CNC-milling machines:
Limited Software ConstruCAM-3D ( from S-720 and S-400/T
) included
Contact free reference switch and
emergency stop button as well as 22mm thick linear guide ways and
individually adapted screw nuts
------------------------------------------------------------------
--------------
Equipment / Productdetails:
oDrive : 4 stepping motor by Nanotec with
1600 steps/rev (1/8 Step)
o2 motors for constant tension and
compression during milling operation on X-Axis
oGuide ways X and Y
axle 22 mm / Z Axis 16mm, grinded and with 61hrc hardened surface
oFeed through of long workpieces possible, because there's no belt
drive at the end of the X-axle
oBall bearings at both sides
of ball screws on X and Y axis
oTraverse speed of rapid feed: max.
7000 mm/min
oTechnical resolution : 0,00625 mm ( 1/8 Schritt )
oReversal error max.: +/- 10µm ( 0,01mm )
oTable size /
clamping area: 1050 x 520 mm
oTraverse Paths: X=720 mm; Y=400 mm;
Z= 110 mm
oReference- and limit switch on all axes
oDouble
safety emergency stop button
oEnergy chain for clean cabling
oTotal dinemsions incl motors: L x W x H = appr. 1070 x 690 x
500mm
oMilling Motor anchorage: Euroneck Ø43mm
oincl.
Software WIN PCNC Light (optional WIN PCNC Economy, USB or
professional)
oincl. Software ConstruCAM-3D limited (
recommended sell price full version 1902.81 EUR)
oModular
frame for universal application
oWeight appr. 41 kg
oComplete
machine Includet 4 driver microstep controller 4x 2,1 Ampere
oAn approx. 30-minute long introduction during pick up and an
unlimted telephone support are included.
oAn approx. 2 hours
long introduction and an installation of software on your brought note
book/ PC as well as a explanation of fundamental terms of Corel Draw
etc. possible, too.
------------------------------------------------------------------
--------------
Technical data contained
in the price TÜV-certified control system, tailored to the CNC
milling machine / CNC milling machine:
- 4-Channel
Stepper motor -CNC-Controller with actual SMD-Technology
-
Main voltage 115 - 240 Volt / 47 - 63 Hz.
- Motor current 4 x
3,5 Ampere
- Microstep controller Resolution 1/10-Step / 2000
Steps/Rev.
- 4 Connections for 4 brushless Motor / Stepper
motor
- Connection with parallel port and Software WIN PCNC
Light, Economy or USB with WIN PCNC USB or Profi version. ( Also
possible:MACH3, USBCNC, NC-Easy LINUX EMC and LINUX CNC and much other
stepper driver software.)
- "Sleep-Function" for controlling
current down
-Oszillation motor-Connection 24 Volt by PWM
controllable ( for example: Tangential knife ) or 24 Volt constant for
motor Break by ST-plug
- 2 relais for maximum 1200 Watt by
Software switchable (up from WIN PCNC Light), 230 Volt, max. 6,0 A /
Plug (for example Air compressor, cooling, exhaust, dust
extraction).
- 0 - 10 Volt for connecting a HF converter for
an high frequency spindle
- 12 Status-LEDs for C4444965
monitoring all important function (Power, Toggle, Move, X, Y, Z, C;
Overheat, Emergency stop, Relais: Spindle / Cooling, Short
Circuit)
- Connection possibility of 4 end- or. Reference
switches and one Emergency Stop switch
- Motor connection by
D-Sub 9-pin. (C-Axis: 15-pin.)
- Emergency-Stop Switch
- Overheating protection
- Short circuit protection
------------------------------------------------------------------
--------------
More information, several videos
about the applicability of the machine and customer implementations
can be found here.
The name High-Z derives from the
fact, that the machines lower contruction allows to work on pieces
with unlimited height.
Because almost 90% of the
demand for a 5-channel microstep control and subsequent expansion of
an additional axis, the production of the 4-channel control won't be
produced any more in the near future!
Take
advantage of the High-Z 3D-cnc-router as a plasma cutting machine for
plasma cutting of steel, etc. Infos here !
Software Process for our cnc-routers:
You simply need to draw, control the tool path and finally move
the machine with the generated G-codes.
Usable
software:
-ConstruCAM-3D - WIN PCNC-
Mach2/Mach 3 - to 3D- CNC router / milling and engraving machine /
engraver
-DeskProto - WIN PCNC- Mach2/Mach 3 - to 3D- CNC
router / milling and engraving machine / engraver
-FilouNC -
WIN PCNC- Mach2/Mach 3 - to 3D- CNC router / milling and engraving
machine / engraver
-3D-PhotoFormer - WIN PCNC- Mach2/Mach 3 -
to 3D- CNC router / milling and engraving machine
fresadora
fresatrice fraiseuse Jyrsintae fraisage machin Freesmachine
Frezesanas masina frezavimo masinos ? Frezarka Freza Fraesmaskin
Frézovací stroj Frézka ?; New ready for operation
seller offer
No. resale 67805464
|