westfalia ms used for sale

This MICROSTEP MSF 9001.25Lr+T500 Fiber laser cutting machine was manufactured in 2015 in Slovakia. It is equipped with a 10kW laser, nLight CORONA-CFX-10000. The working area is 9000 x 25000 mm and the maximum cutting capacity is up to structural steel of 25 mm. As additional equipment the machine comes with Donaldson DFPR08 extraction equipment, automatic lubrication system and beam guidance via light cable. The machine was retrofitted in 2022.

This MicroStep MSF 3001.20L Fiber laser cutting machine was made in the year 2017 and has 15735 production hours, of which 4907 are cutting hours. It is equipped with an iMSNC control unit. The machine has a laser power of 3 kW.

plate thickness: 6 - 40 mm feed: 2,2 m/min total power requirement: 1,5 / 2,1 kW weight of the machine ca.: 65 Kg dimensions: 1,2 x 0,8 x 1,1 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Key data: 250 mm, 4 kW, 4060 m³/h

arke: Holtrop Jansma Clean Air Extraction Type: MSO 250 Year of construction: 2016 M-No.: W0056730S Clean air extraction: MSO 250 with flame protection device Intake support: ø250 mm Length: 2,250 mm Width: 1,230 mm Height: 2,840 mm Weight: 600 kg Capacity: 4,060 m3 /hour Pressure: 1,900 Pa Power supply: 4.0 kW, 380V, 9 Amp Filter surface: 27 m2 Filter bags: 30 pcs. Length of filter tubes: 1,450 mm Filter tube diameter: 200 mm Cleaning: included Noise: dB(A) Flame protection system: automatic fire extinguisher with powder extinguishing agent, automatic slider in the return air duct, automatic electrical shutdown of the extraction (New powder fire extinguisher witrd assembled before delivery) Scope of delivery: filter system, with built-in intake fan, control cabinet, automatic fire extinguishing installation with flame protection damper

Holtrop Jansma Extraction with Kontainer Chip Disposal Type: MSK350S Year of construction: 1998 Type: overpressure filter system Intake manifolds: ø350 mm Capacity: 8,000 m3/hour Year of construction: 1998 Filter surface: 46 m2 Fan: ETD 350, 7.5 KW/1.500 tpm Star wheel chip disposal: 800 mm - Pressureless Chip disposal fan: EMD-200, 4 KW-300tpm, 45m3/uur Explosion Pressure Release: Doors serve as a pressure release in the event of an explosion Pressure Measurement: Pressure Dial Gauge Cleaning: 0.13 KW/1500 KW vibrating motor Air recovery: 500500 mm with built-in flame protection damper Dimensions: 3,3503,0001,200 mm Scope of delivery: filter system with intake fan Fan, transport fan, control cabinet, air recovery with built-in flame protection flap

Description: vertical spindle ISO 40, horizontal spindle ISO 50, table size 1300 x 300 mm, 4 T-slots, spindle speed vertical 40 to 3500 RPM - horizontal 25 to 1500 RPM, X-axis 950 mm, Y-axis 400 mm, Z-axis 425 mm, maximum workpiece weight 700 kg, spindle power 1.1 kW, with additional tools: machine vice, jaw width 160mm, boring head, drawer cabinet with 5 pull-outs, without CE document Approx. Onsite Dimension. (l x w x h): 1,500 x 1,900 x 2,400 mm, weight approx.: 2,800 kg

Used Blow Molding Machine UROLA MSC6 HDPE Year 2019 Introduction The UROLA MSC6 HDPE blow molding machine manufactured in 2019 stands as a pinnacle in HDPE bottle production technology Equipped with six moulds this rotary blow molder sets a new standard in efficiency and performance Technical Specifications The UROLA MSC6 HDPE utilizes a rotary blowing unit featuring six cavities capable of achieving a maximum output of 1600 bottles per hour Furthermore the machine boasts a maximum mould opening of 240mm and a mould clamping force of 9 000 kg ensuring precision and stability in the production process Blower HDPE Crafted specifically for High Density Polyethylene HDPE bottle production the UROLA MSC6 HDPE guarantees superior quality and durability Its advanced design and engineering cater to the demanding requirements of the packaging industry making it an ideal choice for manufacturers s ...

Description: Panel Sizing Units 2 PANEL SIZING UNITS 1 Unit : miller hogger PANEL SIZING UNITS 2 Unit : scoring unit Approx. Onsite Dimension. (l x w x h): 3,650 x 2,100 x 2,100 mm, weight approx.: 2,381 kg

Description: Nominal power: 2000 W Nominal speed: 4200 rpm Blade diameter: 254 mm Max. material thickness: 90 mm Serial number: R11W01 00067 Approx. Onsite Dimension. (l x w x h): 920 x 570 x 600 mm, weight approx.: 20 kg

Description: Operating pressure 8 bar Maximum pressure 8 bar , 400 volts, 50 hertz, 3 kW , Maintenance on 22.2.2024 at 3757 operating hours. all filters + oil replaced Approx. Onsite Dimension. (l x w x h): 1,200 x 800 x 1,500 mm, weight approx.: 235 kg

This 5-Axis lathe manufactured in 2010 is a MAZAK QUICK TURN NEXUS 100-II MSY. It features a Mazatrol Matrix control, driven tools, a Y-axis, and a counter spindle. The machines maximum spindle speeds are 5650 rpm (HS) and 6000 rpm (GS), with a bar capacity of 52 mm. It includes a chip conveyor, interface for bar loader, and is equipped with an automatic parts catcher. The MAZAK QUICK TURN NEXUS 100-II MSY machine we have for sale represents an opportunity for precision and efficiency. Contact us for more details.

sheet width: 3000 mm plate thickness: 3 mm weight of the machine ca.: t 3 support arms 1 angle stop pneumatic hold-down device Backgauge to be operated by hand The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Description: Serial  , ,Number: 95088 Main engine power: 37kw Spindle speed: 4 to 2000 rpm Nominal spindle speed: 177 rpm Cone : KOMET ABS 125 Outer diameter: 280 MM Strokes: 1600x3500x1500 mm Feeds: 3 to 5000 mm/min Rapid feeds: 10.000 mm/min X: 62/3000Nm Y:58/2000Nm Z: 62/3000Nm Installed power: 125 kva  , weight approx.: 30,000 kg, Approx. Onsite Dimension. (l x w x h): 14,000 x 5,000 x 4,000 mm

Description: • Multi spindle slot mortiser • Serial number AC 256-T8 • 2  ,tables with dimensions 1000 x 220 mm each • Tables with adjustable height 120 mm and depth • 2 pneumatic clamp devices in each table • 5 horizontal independent oscillanting units working by 2 sides, motor power 0.50 KW-6000 rpm each • Head height adjustment 60 mm • Maximum tool diameter 16 mm • Frequency converter Approx. Onsite Dimension. (l x w x h): 1,800 x 1,650 x 1,550 mm, weight approx.: 1,300 kg

roll diameter:420 mm throat:400 mm workpiece height:325 mm table surface area:615 x 615 mm table swivelabel +/-:10/45 ° table - inclinable:+/- 20 ° cutting speed:20 - 2500 m/min total power requirement:2 kW weight of the machine ca.:0,5 t dimensions of the machine ca.:0,95 x 0,65 x 1,83 m

FOR SALE .. WESTFALIA GEA BILGE MASTER 1500 COMPLATE SYSTEM YOB 2007 AT TURKEY ... HAVE A GDY SIR; WE VE COMPLETE SYSTEM WESTFALIA GEA BILGE MASTER 1500 AT STOCK. PLS FIND DETAILS OF SYSTEM. — BILGE MASTER 1500 YOB 2007 SER NO 9017-909 IMO CERTIFICATE 330 238 / MEPC 107 (49) — BILGE WATER CENTRIFUGE GEA WSD8 01 037 YOB 2007 S No 9039 654 —OIL MONITOR OMD 2005 —COMPLETE WESTFALIA CONTROL PANEL --GEA FILTER AF 300 YOB 2006 -- FEED PUMP IF YOU VE ANY FURTHER QUESTIONS PLS DO NOT HESITATE TO CONTACT WITH US. Capt. Ayhan Ugurluba BEST of regards; Aliaga marine services E mail: info@aliagamarine.com PHN/fax: + 90 232 618 03 85 Mobile: + 905556084850 ABC.aliagamarine.com TURKEY

Centrimax provides used, but reconditioned centrifugal decanters (by Flottweg also as full coat screw centrifuge GEA Westfalia Separator as centrifugal decanter - or by Alfa Laval also de decanter centrifuge or decanter centrifuge known as) makes Flottweg, GEA Westfalia Separator, Alfa Laval, Sharples, Andritz etc. Thanks to a comprehensive overhaul and delivery with a mechanical warranty, you meet the highest standards of quality from supplied decanter (full coat screw centrifuge, Zentrifugaldekanter). The new SPS controls supplied with the decanter enable easy integration into the existing production process and lead to a new machine character. Centrimax provides almost all de decanter types available on the market:

Artec mini table lathe C2x300 tips size 300 mm + 8 PCs chisel set Mini table lathe C 2 and 8 PCs. HSS cutters set now in the Westfalia savings Kit. C-2 the spindle speed variable from 200-2500 RPM via a potentiometer is adjustable at the mini lathe. About a 80 mm three-jaw chucks can be clamped workpieces easily. The workpieces can be supported with a tailstock with MK 2-recording. By a quad-steel holder the cutters can be secured, designed for 8 mm cutters. Also thread can be cut with this mini lathe 1.5 mm pitch. All materials with normal strength can be edited. (Aluminium brass steel). Technical data: centre height 90 mm centre distance 300 mm spindle bore 19 mm tailstock intake MK-2 thread cutting range 0.2 1.5 mm speed range 200-2500 U / min variable power 250 Watt/230 V Plan route 65 mm Oberweg sled 55 mm Quill trail 50 mm Dimensions Lxwxh approx. 700  ...

Besides used, reconditioned separators and decanters of trademarks of GEA Westfalia Separator, Flottweg and Alfa Laval delivers more centrifuge designs, two fluids of different densities used for the drying of solids, the clarification of liquids or the simultaneous separation - hence separating centrifuge - Centrimax. Also these industrial centrifuges are by Centrimax, overhauled, with a new plc and delivered with a mechanical warranty.

Centrifuge,rustfrit stål,Westfalia type TA14-06-506,mask.nr. 1675 380,5,5 kW motor

Centrifuge,rustfrit stål,Westfalia type TA14-06-506,mask.nr. 1681 026,5,5 kW motor

Centrifuge,rustfrit stål,Westfalia type KA25-35-576,7,5 kW motor,2-kammer kugle.

Separator,stainless steel,Westfalia type TA14-06-506,machineno. 1675 380,5,5 kW motor

Separator,stainless steel,Westfalia type TA14-06-506,machine no. 1681 026,5,5 kW motor

Centrifuge,stainless steel,Westfalia type KA25-35-576,7,5 kW motor,two-chamber bowl.

Manufacturer: GEA Westfalia separator Model : ca 220-110 Year : 1985 - 2004 Type : Gas-tight centrifuge / decanter, for operation under normal atmospheric pressure : low cone bowl.   Atex : (Ex) d3nG4 Electrical cabinet : year 2004 Danfoss frequency controller (prod + CIP use) Automatic lubrication Hydraulic flow: 7,000 litres/h Bowl diameter: 220 mm Bowl length to diameter ratio L/D: 2.65 Bowl rotation speed: maximum 5,500 min-1 Centrifugal acceleration z: maximum 3,700 g Bowl moment of inertia GD2: 1.0 kg/m2 ADF motor power: 11 KW Motor speed: 3,000 rpm Net weight of machine (without motor and accessories): 650kg

Tip height 120 mm, grinding length 1000 mm, 8 spindle speeds 55 - 600 rpm, spindle head holder MK 3, table sash. infinitely adjustable, table swivel 7 each, delivery by hand or automatically, grinding wheel-dm. max 400 mm, Grinding wheel width approx. 60 mm, tailstock holder MK 2, connection value approx. 3.5 kW, automatic working cycle, express speed 30 mm, automatic. Piercing loops. The machine is functional and does not require a geometric revision. Accessories on request!

1 piece snow shovel (presentaion unit,2 x used so Mint) > Quick recording with forks > Protection against unintended slippage > Clearance angle 2 x to the left or right adjustable > Rubber cutting edge attached 150 x 20 mm, thus it is faster Change later possible > Surface painted RAL 2000 (yellow-orange) > technical data: -Blade width: 1500 mm -adjustable space width: 1,100 / 1,300 / 1,500 mm -Plate height: 620 mm -Fork cross sectional area: 150 x 50 mm -Fork distance: 420 mm -Tare weight: 175 kg -incl. 1 year p + K.-warranty included > MSRP manufacturer: Recommended Manufacturer Price Euro 1.275 export price (delivery inside Germany + 19% Tax) PICK up price from 71116 Gaertringen (Shipping extra on request, possible) save over 37 % compared to Manufacturer price Be ready, because the next winter / weat ...

PCA Senertec heating oil system used with 32000 hours of operation System until the very end in operation Regulator in MSR1 Performance increase Power 5,3 kW thermal power 10,5 kW

Manufacturer: Pressta Eisele Type: 501 angle punch Overhaul year: 2020 Built in 2010 Saw blade carbide: 500 mm Drive power saw motor: 5.5 KW Speed Saw Motor: 2860 min-1 Cutting speed Saw blade: 4500 m/min Saw blade feed: infinitely adjustable 0-70 mm/s Tool area 90 max approx.: 20 x 250 mm Punching cylinder: 1 pcs vertical top diameter 100 mm ,1st st horizontal front diameter 100 mm Punching force power: 4.0 KW Pressure max. 280 bar Pressure in KN at 280 bar approx.: 210 KN Volume flow at 280 bar approx.: 6.8 L/ min Pressure in KN at 200 bar approx.: 150 KN Volume flow at 200 bar approx.: 9.5 L/ min Supply length pneumatic: single stroke max. 600 mm Servo controlled: single stroke max. 600 mm Multiple stroke max. 9999mm Replenishment. servo-controlled replenishment unit max. 500 mm/s Compressed air connection on the side: 6 bar Weight (s ...

Bevel-helical gear units Manufacturer: Bonfiglioli Model: A-50 4 UH50 P90 LO E engine: Euromotori 1 .1kw MS9016 Built in 2008 NEW, unused from old stock for further details please refer to the pictures.

Bevel-helical gear units Manufacturer: Bonfiglioli Model: A 413 UH45 P80 LO E engine: Euromotori 0, 55kw MS8026 Built in 2008 NEW, unused from old stock for further details please refer to the pictures.

MORI SEIKI SH-500/40 Horizontal Machining Center was built in Japan in 1999 by MORI SEIKI CO., LTD. The machine is equipped with a numerical control type MORI SEIKI MSC-502. The milling machine has a table size of 500 x 500 mm and processes workpieces weighing up to 500 kg. The travel range of its X, Y, Z axes is 630 x 600 x 650 mm, respectively. The machine spindle rotates at 12,000 revolutions per minute. The milling machine is equipped with a magazine for forty tools with a maximum tool diameter of 150 mm, length 360 mm and a weight of 12 kg. The milling center is offered at a price with different types of holders. Technical parameters of the MORI SEIKI SH-500/40 CNC milling machine - CNC control: MORI SEIKI MSC-502 Travel range: - X axis (table travel length): 630 mm - Y axis (vertical movement of the spindle head): 600 mm - Z axis (cross table movement): 650 mm - distan ...

ELHA 6 Axis Horizontal Machining Center Xpert-K High-Performance Horizontal Machining Center The newly designed DEPO XPERT K horizontal machining centre offers a high degree of flexibility and above-average productivity. Description Horizontal BAZ The 6 axes are individually controllable. The HSK 100 holder makes it possible to clamp large tools and thus process large areas with high chip removal. Installed is a high-performance G30 fork head spindle with hydromechanical clamping system and a hybrid slewing bearing at top speed which allows extremely high speeds to be driven in order to achieve an optimal milling result even with the smallest tools. This fork head is equipped with a fully automated spindle change cycle, which makes it possible to replace the complete spindle in less than an hour. A hydraulic clamping device is installed for clamping components (effective table ...

Sheet thickness: 3,00 mm Bending length: 1500 mm Number of rolls: 3   MACH-id    5171 MAKE        Birlik TYPE         MSM YOP          2006 SPECIFICATIONS Control       Conventionel Hydraulic / Mechanical      Mechanical 3 or 4 roll       3 roll Maximum sheet thickness      3 mm Bending length       1500 mm Max. Rolling capacity Ø 2.500       3 mm Max. Prebending capacity Ø 2.500         2.5 mm Top Roll Ø     110 mm Bottom Roll Ø      110 mm Side Rolls Ø     110 mm DIMENSIONS Length        2400 mm Width       980 mm Height       1 ...

Turning diameter: 923 mm Turning length: 1250 mm Turret positions: 12 Positions ATC: 0   Number controlled axis: 4   CNC Brand: _Unknown / Other CNC Model: mAPS msx 850 III MACH-id    4462 MAKE         Mori Seiki Japan TYPE            NL 2500 Y 1250 YEAR           2008 SPECIFICATIONS Swing over bed    923 Swing   755      Distance between centres         1250 Power kW  live tools        5.5 X Axis       260 Z Axis        1345 Y Axis mm      100 C Axis         360.000 Control       MAPS MSX 850 - III Chip conveyor         Yes Tool eye     Ye ...

Industrial PC or control unit EST. technology consisting of various Flexcommander modules: -EST technology Flexcommander power supply 230V, part No.: 008741 -EST technology Flexcommander disk drive floppy, part No.: 0008740 -EST technology Flexcommander CPU, part No.: 0008734 -EST technology Flexcommander Ethernet, part No.: 0008738 -EST technology Flexcommander SLAVE PROFIBUS DP, part No.: 0008737 - EST technology Flexcommander MSR Channel1 + 2, part No.: 00087355 -EST technology Flexcommander MSR Channel1 + 2, part No.: 00087355 The Flexcommander modules are older year manufacture and used (see also images). The function was not tested, therefore no guarantee or warranty.

Capacity: 12 t Table length: 2000 mm Table width: 0 mm Stroke: 2000 mm CNC Brand: _Unknown / Other CNC Model: Leonard en Bauer MAKE   ARKU Germany TYPE    VRM 200/7/2000 + AH 1200/2000/MSG-4Q YEAR   1990 SPECIFICATIONS Controll   Leonard + Bauer Throat     2000 mm Maximum sheet thickness Steel   6,3 mm DIMENSIONS Length   6000 mm Width     4500 mm Height    3000 mm ARKU De-Coil & Straightener 2000 x 6,3 mm   Make           : ARKU Germany Typ              : VRM 200 / 7 / 2000 Serial No    : WO 1576 Age              : 1989 in Work 1990  ARKU Precision s ...

Machine Details Warehouse number 1105-03539 Machine type CNC lathe Mori SEIKI brand Type SL 15 MC Year of construction 1995 Control type CNC Control fanuc 16 T Storage location FRANCE Country of origin Japan Delivery time immediately Freight base from stock Price Technical details Turning diameter 420 mm Turning length 560 mm Control fanuc 16 T Vibration diameter 455 mm Rapid traverse in X and Z direction 18/24 m/min Travel x/z 220 / 520 mm Rod diameter 45 mm Spindle motor 11 / 7.5 kW Spindle speed 50 - 5000 rpm Spindle torque 143 Nm Spindle nose JIS A2-5 Revolver Stations 12 Tailstock pinole holder MK 4 Tailstock pinole stroke 80 mm Tailstock pinole diameter 75 mm Tailstock travel 450 mm Total power requirement 25 kW Information - CNC - Control MSG 516 fanuc 16 3 BAKE FOOD KITAGAWA DIA 165 - Coolant device SPAENEFOERDERER

Gr. Swing diameter: 600 mm Top width: 2200 mm Gr. Grinding diameter on grinding wheel 800 mm Ø: 125 mm Wheels Ø use of put sticks: 20-125 mm Grinding wheel dimensions: 800 x 28-800 x 42 x 305 mm 2 wheel speeds 3 workpiece speed: 32, 55 and 96 RPM Table Shift manual coarse/fine: 10/2 mm Machine. Feed speed of the grinding wheel: 0,005 - 0,025 mm Table 6-speed: 120-1540 mm / min Grinding spindle stock drive: 8 kW Electr. Supply: 380/400 V, 10 kW Space requirements: 6100 x 2300 x 1600 mm Weight: 7T

Equipment twin multi disc unwind station MTD-AWS-OWK 2 MTD AWS OWK Combination unwinding station 1 MTD-ZSF-LI-MSD Stack pacer LAT 1 LAT-2:1

High performance vertical boring machine make ALZMETALL type Abomat 20Machine -No: 212, built in 1982Drilling capacity in St / GG: 25/30 mmOutreach: 280 mmSpindle mount: MK 38 speeds: 160 - 1800 rpm.6 feeds: 71 - 180 mm / min.Table mounting surface: 400 x 500 mmDrilling carriage stroke: 800 mmRapid traverse speed: 4.5 m / min.Weight approx: 530 kgDrive power: 1.45 / 1.9 kWWith- Multi-spindle head- semi-automatic work process- electrically controlled jump feed- Switch cabinet- swiveling operating part- Central lubrication- Cooling device type B with separate tank with pump- Semi-automatic tapping attachment with guide cartridge- Connection flange for mounting a multi-spindle head- Coolant inlet via distributor with inlet to eachxa0xa0 Spindle of the MSK with 1 cock each- Feed unit for drilling carriage movementused, in good conditionPrice on request.Delivery: ex warehouse or location free ...

+ ATTENTION - PRICE DROP! + Prices are rising, ours are falling! + Our prices are reduced by 50% now, + due to warehouse restructuring! + Also, consider taking a look at our other offers in stock. Universal Cylindrical Grinding Machine MSO FFM-U 130/1000 manufacturer: MSO type: FFM-U 130/1000 mach.-Nr.: 16219Mv12438 year of construction: ? comm.-Nr.: 3990505/009 stock-nr.: 1841 + Regular Price: 4.750,- € > Reduced Price: 2.375,- € BN + All prices are shown without taxes (net price) The machine can be used for: outer grinding surface grinding cone grinding Technical Data (According to manufacturer) centre height: 130 mm swing-Ø: 260 mm grinding length: 1000 mm between centres: 1050 mm grinding wheel diameter: 300 mm bore-Ø: 127 mm largest width of grinding wheel for plunge grinding: 40 mm largest total width of a grinding wh ...

CNC gest. Portal grinding and polishing machine make HAU-SIMEX-RAPACK type FlexomatMachine -No: 88/08/30/2271 built in 1988Technical specifications:AXIS 1Longitudinal axis, horizontal X: 1100 mmTravel speed: 250 mm / secAXIS 2Transverse axis, horizontal Y: 510 mmTravel speed: 250 mm / selAXIS 3Vertical axis Z: 475 mmTravel speed: 190 mm / secAXIS 4Rotation axis, travel range: 210 °around the Z axis =: UTravel speed: 5.4 rpmAXIS 5Rotation axis, travel range: 360 °around the Y axis =: VTravel speed: 22 rpmAXIS 6Rotation axis, travel range: 360 °around the X axis =: WTravel speed: 22 rpmClamping force of the basic clamping device: 700 NExpansion shaft for workpiece: 50 mmNumber of milling units: 2Type of belt grinder: MSF 355Sanding belt size: 3500 x 100 mmContact disc size: 250-500 x 100 x 35 mmDrive power: 4.0 kWSpindle speed: 900-4350 rpm.Working height: 1000 mmExternal dimensions d.  ...

Mobile industrial vacuum cleaner make RINGLER type RI 331 - W2GMachine -No: 87210For vacuuming up general and carcinogenic dust, particularly dangerous carcinogenic hazardous substances as well as many fine andProblematic dusts.Technical specifications:Air flow rate 360 Nm3 / hDust class main filter MSpeed 1400 rpm.Connected load 2.0 kWPower connection 220 V.Dimensions 855 x 760 x 1340 mmCollection container 50 lWeight 94 kgused, in good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools

Manufacturer: Yale Type: MS15X Type: High-lift truck Load force: 1500 kg Mast: standard Battery: Hoppecke, 24V, 375Ah lifting height: 2768 mm free stroke: 100 mm Gabellaenge: 1160 mm fork width: 570 mm fork thickness: 65 mm fork rail width: 675 mm Number of tyres front: 2 Number of tyres rear: 2 Ideal for the following applications: Operating cycles and multi-shift operation; storage equipment in low or medium-high and high shelving systems; Cooling House Applications -30 oC. Ergonomics 5-point wheel rest and fixed stabilizing wheels provide increased stability and greater safety when cornering. Without mounting gear and fork

Control MSX-711-MAPPS IV Double pallet changer. Pallet diameter 500 mm. 2 axes NC swivel round table. B-axis 0.001 / 360. A axle +30/-120 - 0.001. travel distances: X 730 mm, Y 850 mm, Z 1,100 mm. preshoot/ejem up to 50,000 mm/min. Spindle holder HSK-63A. Spindle speeds up to 12,000 rpm. Tool magazine positions: 120. IKZ. Probe. tool load measurement. tool breakage control. usw... Little operating hours - Super condition.; Super

Vertical band saw make WESPA type MSP 4Mash. -No: 621092for sawing steel, stainless steels, nickel alloysGray, temper, cast steel and similar materialsRoll diameter: 400 mmCutting height: 280 mmProjection (cutting area): 400 mmBandwidth max. : 25 mmstepless belt speed: 0 - 150 m / min.Saw blade size: 2880/2980 x 25 x 0.9 mmOutside dimensions approx: 900 x 700 x 1800 mmWith- Banded butt welder IDEAL BS 25- Grindstone- tiltable tableused, ready for operationPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools

MSX-711-MAPPS IV CNC Control Twin pallet changer. Pallet diameter 500 mm. 2-Axis NC Rotary / Swivelling table. B-Axis 0.001° / 360°. A-Axis +30°/-120° - 0.001°. Travels : X 730 mm, Y 850 mm, Z 1100 mm. Feeds / Rapids to 50000 mm/min. Spindle taper HSK-63A. Spindle speeds to 12000 rpm. 120 station tool magazine. Coolant through the spindle. Measuring probe. Tool length measurement. Tool breakage control. etc... Low run hours - Superb condition. ; Super