westfalia ms used for sale

Max. operational pressure: 10bar, connected load: 11kW, weight: 235kg, an inspection is possible.

Scrap shear dentition attachment for an excavator used MBI ZHEJIANG MANTOVANI MANTOVANIBENNE Type MS22-MC Year: 2020 suitable for multipunch MS22R Overall dimensions: 1100 x 1100 x 500 mm Changes and errors in the technical data, information and prices as well as prior sale reserved

Working pressure working chamber/ double jacket: 2.5/2bar, with documentation and accessories, on-site inspection is possible, videos not available.

Scrap shear dentition attachment for an excavator unused MBI ZHEJIANG MANTOVANI MANTOVANIBENNE Type MS15-MC Year: 2020 Overall dimensions: 1100 x 1000 x 500 mm Changes and errors in the technical data, information and prices as well as prior sale reserved

Servo drive Axor Minispeed MS060 8/16 tested used part

Eillert Salad spinner Model: MSD-500-V Serial: 188 2008, Stainless salad spinner, with three baskets, 1.5Kw, 3Ph

sheet width - max.: 0600 mm coil weight: 3,00 t coil internal dia.: 465 - 530 mm total power requirement: kW weight of the machine ca.: 2,45 t dimensions of the machine ca.: 2,72 x 1,70 x 2,40 m material width (previously) 400 mm mandrel length 630 (655) mm mandrel – Ø (expanding range) 465 – 530 mm height floor - middle of mandrel 1.450 mm height upper edge decoiler construction - middle of mandrel 1.050 mm working direction (previously) right - left accessories: construction 3-segment-construction decoiler movable on base frame hydraulically press arm hydraulically press roll not driven expanding process mechanically decoiler motor driven (via chain) power 3,0 kW no. – limiting arms 6 dimension – limiting arms (l x h) 410 x 180 mm valve components mounted at decoiler construction control unit (breaker unit) with cable hydraulic unit not available The data for this ad was cre ...

Bead Mill Manufacturer: Fryma Type: MSM-50 Year of construction: 1987 No.: M12671 Pressure working space: 2.5-0.2 bar Pressure double jacket: 2.0-0.2 bar Power: 45 kW with pressure gauge, with temperature gauge as good as new grinding set movable on castors Control cabinet is missing LBH: 1600 x 1000 x 2400 mm

Bead Mill Manufacturer: Fryma Type: MSS-50 Year of construction: 1993 No.: M15825 Internal pressure: 2.5 bar Pressure double jacket: 2.0 bar with control cabinet Power: 45 kW Operating hours: 17 589 h very good condition as good as new grinding chamber LBH: 1600 x 1200 x 2100 mm

Vertical band saw JAESPA type MSU 4 Fabr. No. 724749 Year of construction approx. 1980 Roll diameter 420 mm Projection 400 mm Table size 610 x 610 mm Cutting height 260 mm Saw band length min. 3200 - max. 3400 mm Saw blade speed 10-1500 m/min. infinitely variable Mains connection 400 volts, 50 Hz - infinitely variable band saw blade speed via 2 gear stages and infinitely variable swivel via belt drive saw table - Saw blade butt welding machine IDEAL BS0-16 - Saw blade scissors - Whetstone for grinding the weld seam Space requirement L x W x H 1000 x 850 x 1850 mm Weight 400 kg good condition; used

Two-station machine for stacking canisters up to 10 ltr. Year of construction 2000. With PWDS and SFDR. Clamping force 200 kN. With aftercooling stations and needle bubbles. Also included is the conveyor belt for canisters. Good condition

MS2 90L-4 ,Output kw: 1.5, Speed RPM: 1425, Efficiency %: 82.8, Power factor cosΦ: 0.79, Weight kg: 17.6, Starting torque Mn/Nm: 4 BERGEN BRM, WARTSILA, DEUTZ KHD/MWM, MAN B&W, JENBACHER, ABC, PIELSTICK , GUASCOR, MAK, CATERPILLAR, VOLVO, WICHMANN, PUMPS, SACM, SEPERATOR, COMPRESSSOR, FILTER, PUMPS, VACUUM SAVAGE SYSTEM, HEAT EXCHANGER & COOLER. Spares are available and all kinds of spare parts can be given. Please contact us for your questions. EVE International AS E-Posta : info@eveinternational.com.tr Phone : +90 0216 519 2707 Fax : +90 0216 519 2720

Holtrop Jansma clean air extraction with swivel lock, flame suppression device & fabric protection damper Brand: Holtrop Jansma clean air extraction Type: MSO 350/300s Year of construction: 2015 M-Nr.: Woo560825S , 5960MS Clean air extraction: MSO 350/300 with star wheel swivel lock Intake supports: ø300-350 mm Length: 2.925 mm Width: 1,230 mm Height: 3,440 mm Weight: 740 kg Capacity: 7,900 m3 /hour Pressure: 1,965 Pa Power supply: 7.5 kW, 380V, 9 Amp Filter surface: 40 m2 Filter tubes: 45 pcs. Length filter tubes: 1,450 mm Diameter filter tubes: 200 mm Cleaning: included Noise: 77 dB(A) Fire protection: sprinkler installation with fire brigade connection Flame protection flap: 70°C melt cartridge Condition: Fully functional tested Optional: Automatic fire extinguishing: € 1.750 Return air - with summer-winter slider: € 350

Holtrop Jansma Suction Manufacturer: Holtrop Jansma Type: MSK300 Capacity: 6,000 m3/hr Year of construction: 2001 and 1999 Fan: ETD 300, 5.5 KW/1,500 rpm Explosion Pressure release: doors serve as pressure release in case of explosion Pressure measurement: Pressure gauge Cleaning: 0,09 KW/1500 KW Ruttelmotor Dimensions: 3.3503.0001.100 mm Scope of delivery: Filter system with built-in fan, control cabinet

Used multi-spindle machine INDEX MS36E built in 1996 including a lot of accessories (collets, synchronizer guns, interchangeable wheels, various working curves, etc.) The plant is virtually ready for dispatch, in a dismantled state for inspection. For photos, technical data and a list of accessories, see Appendices. It has no major defects, is basically ready for operation, only the rubber hoses should be changed before commissioning and the coolant-lubricant system should be thoroughly cleaned and rinsed throughout. Accessory listing MS36E Iemca Loading Magazine Oil filter system (+3 rolls of filter paper) Collets Synchronizer Clamps (sentences) Ø 24 Ø 16 Ø 26 Ø 20 Ø 27 2x Ø 23 Ø 28 2x Ø 26 Ø 30,5 2x Ø 27,5 Ø 31 Ø 32 div. jaws Ø 33 for 3-jaw chuck Ø 34 Ø 36 SW 24 1x spindle stop (currently layer 4) 3 sets of rod guide tubes Various reductions f ...

sheet width: 2030 mm plate thickness: 1,0 mm roll length: 2050 mm roll diameter: Ø 95,0 mm work height max.: 950 mm engine output: 1,0 kW weight: 275 kg range L-W-H: 2700 x 700 x 1160 mm Furnishing: - motor-driven asymmetrical 3-roller bending machine - hardened rollers - Manual folding storage for quick removal of the workpiece - Profile inlets at the end of the roller - Double foot switch for R/L run and emergency stop button - rear roller manually adjustable - manual infeed of the bottom roller - electrical safety device Machine link : http://mhp.logotech.de/hpm/v7/Datenblatt/datenblatt.php?machineno=1008 -9401257 The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Millar MSP-CD 50 water pump mounted on a robust base equipped with a, reliable Kohler diesel engine. Available with any desired connection, Flow max: 40 M3/H, Max MWK: 54 MWK, Max dirt passage: 15 MM, , If your interest is aroused, please feel free to contact us, we will be happy to help you., Scope of application: Construction, Industry, Mining, Wastewater, Agricultural, , Throughput capacity: 50 m3/h, Max dirt passage: 15 mm, Motor brand: Kohler, Max. head: 54 MWK, Weight: 240 kg, , = More information =, , Year of manufacture: 2023, Applicable material: Water, Empty weight: 240 kg, Connector size: 2, Cargo space capacity: 833 l, Technical condition: very good, Visual appearance: very good, Please contact Gert-Jan Kruitbosch (+31648061001, sales@vantongerentrading.nl) or John van Tongeren (+31620537017) for more information, , = Dealer information =, , Aroused your interest? . The sales ...

sheet width: 300 mm coil weight: 4 t coil internal dia.: 240 - 640 mm coil outside dia.: 1000 mm total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: neu : ca. 4 Monate ab Auftragse : Italien : 164500 € : 260 to : 500 mm : 1400x1000 mm : 600 mm : 75 mm/s : 5 mm/s : 60 mm/s : 22 kW : 2800 mm : 1650 mm : 2750 mm 4-pillar guide table and ram with T-slots 2 hand operation stroke adjustment pressure adjustment The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: neu : ca. 4 Monate ab Auftragse : Italien : 65000 € : 1300 € : 35 to : 500 mm : 800x500 mm : 600 mm : 125 mm/s : 9 mm/s : 68 mm/s : 4 kW : 1100 mm : 1100 mm : 2300 mm 4-pillar guide table and ram with T-slots 2 hand operation stroke adjustment pressure adjustment The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: neu : ca. 4 Monate ab Auftragse : Italien : 71300 € : 1426 € : 60 to : 500 mm : 800x500 mm : 600 mm : 120 mm/s : 8 mm/s : 58 mm/s : 5.5 kW : 1100 mm : 1100 mm : 2350 mm 4-pillar guide table and ram with T-slots 2 hand operation stroke adjustment pressure adjustment The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: neu : ca. 4 Monate ab Auftragse : Italien : 78000 € : 1560 € : 85 to : 500 mm : 900x600 mm : 600 mm : 105 mm/s : 7 mm/s : 58 mm/s : 7.5 kW : 2250 mm : 1150 mm : 2400 mm 4-pillar guide table and ram with T-slots 2 hand operation stroke adjustment pressure adjustment The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: neu : ca. 4 Monate ab Auftragse : Italien : 104000 € : 125 to : 500 mm : 1200x700 mm : 600 mm : 115 mm/s : 7 mm/s : 70 mm/s : 15 kW : 2550 mm : 1500 mm : 2600 mm 4-pillar guide table and ram with T-slots 2 hand operation stroke adjustment pressure adjustment The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: neu : ca. 4 Monate ab Auftragse : Italien : 123000 € : 170 to : 500 mm : 1200x700 mm : 600 mm : 110 mm/s : 7 mm/s : 70 mm/s : 19 kW : 2700 mm : 1600 mm : 2650 mm 4-pillar guide table and ram with T-slots 2 hand operation stroke adjustment pressure adjustment The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

1-shaft ripper. Brand: Silmisa, model: MSA 630, cutting chamber: 700x630 mm, motor: 45 Kw (60 hp), rotor width: 630 mm, rotor diameter: 400 mm, year: 2004. With electrical panel with touch screen.

Turning tool with indexable cutting jaws, tool holder, turning tool, indexable insert holder, turning tool, indexable insert steel -Dimensions: 150/25 mm -Price: per piece -Number: 1x available -Weight: 1 kg

Angle polisher, angle buffing machine, angle grinder, angle drill -Power: 650 watts -Take: Ø 26 mm MK1 -Max. Width: 30mm -Dimensions: 570/240/H120 mm -Weight: 6 kg

Short-stroke heavy-duty cylinders, high-pressure cylinders, universal cylinders, hydraulic cylinders, straightening cylinders, hydraulic rams, hydraulic pressure cylinders -with external thread: M 90 x 2 -Piston: Ø 55 mm -Max. Stroke: 550 mm -max.: 700 bar

Motor protection relay, relay, heating current monitoring, preheating for generators, contactor, semiconductor contactor, contactor, motor protection, monitoring relay, thermistor -Manufacturer: Schiele, motor protection relay MSS mecotron 2 C/O unused in original packaging -Article number: 2.430.810.93 -Voltage: max. 250 V / A1/A2: AC/DC 24V -Quantity: 19x relays available -Price per piece -Dimensions packaging: 80/25/H100 mm -Weight: 0.1 kg/pc.

Limit signal generator, logic controller, trip point control, multisafe switching amplifier, level monitor, signal isolator, isolation amplifier, isolation amplifier -Manufacturer: Turck, multi safe signal isolator isolation amplifier -Type: MS91-12-R -Quantity: 1x module available -Dimension: 115/50/H75 mm -Weight: 0.4 kg

Agilent 5973N inert MSD with GC Agilent 6890 N Agilent 5973 N inert MSD with GC Agilent 6890 N Network Agilent 5973 inert MSD with EI and turbomolecular pump enhanced BOC Edwards Turbopump Agilent GC 6890 Network with Split/Splitless Injector/EPC Edwards Vacuum Pump 1.5 MSD Productivity Chemstation E02.02 on PC/Win 10 NIST on request Option: Agilent Liquid Sampler, CTC or Gerstel MPS2 Sampler currently serviced/with warranty Installation on request

Three-phase motor, electric motor -Manufacturer: Lafert, electric motor type MS63/4 -Power: 0.25kw -Speed: 1370 rpm -Shaft: Ø 14 x 40 mm -Construction: B14 -Protection class: IP 54 -Dimensions: 240/123/H155 mm -Weight: 6 kg

Motor protection relay, relay, heating current monitoring, preheating for generators, contactor, semiconductor contactor, contactor, motor protection, monitoring relay, thermistor -Manufacturer: Schiele, motor protection relay MSS mecotron 1 C/O unused original packaging -Item no.: 2.430.801.11 -Voltage: 220- 240V AC -Number: 2x relay available -Price per piece -Dimensions packaging: 100/80/H25 mm -Weight: 0.2 kg

Limit value signaller, logic controller, trigger point control, multisafe switching amplifier -Manufacturer: Turck, multi safe limit value signal generator ovp -Type: MS91-12-R -Number: 1x module available -Price per piece -Dimension box: 130/60(H80 mm -Weight: 0.4 kg/pc.

Measuring transducers, power measuring transducers, active power measuring transducers, analogue converters, frequency/analogue converters, frequency dividers, isolating converters, signal converters, isolating converters, switching amplifiers -Manufacturer: Turck, multi safe switching amplifier Switching Amplifier -Type: MS13-22ExO-T -Dimension box: 130/60/H80 mm -Weight: 0.4 kg

Limit value signaller, logic controller, trigger point control, multisafe switching amplifier -Manufacturer: Turck, multi safe limit value signal generator ovp -Type: MS43-12-R -Number: 3x module available -Price per piece -Dimension box: 130/60(H80 mm -Weight: 0.3 kg/pc.

Solenoid coil, stop magnet, pull magnet, opening magnet, stop magnet, locking unit, solenoid valve coil -Manufacturer: Parker, solenoid valve coil Solenoid coil unused -Type: AK-D3W-S-SW-30-610 MSM-H1 -Voltage: 48VDC -Number: 5x magnetic coil available -Price per piece -Dimension: 90/62/H72 mm -Weight: 1.0 kg

Face driver, face driver, face driver, driver tip, face driver, face driver -Manufacturer: WMW ABW Rapid, face driver 8 pieces -Type: MS4 / Rapid4 -Intake: MK4 -Forehead dimensions: 6x Ø 46 mm / 1x Ø 40 mm / 1x Ø 30 mm -Price per piece

Face driver, face driver, face driver, driver tip, face driver, face driver -Manufacturer: WMW ABW, face driver 10 pieces -Type: MS2 / MS2a -Intake: MK2 -Number: front dimension 5x Ø 22 mm / 1x Ø 8 mm / 4x Ø 25 mm -Price per piece

Face driver, face driver, face driver, driver tip, face driver, face driver -Manufacturer: ABW, face driver 4 pieces -Type: MS3 -Intake: MK3 -Forehead dimensions: 1x Ø 22 mm / 3x Ø 32 mm -Price per piece

Hydraulic clamshell grabs, hydraulic rotary grabs, shell grabs, hydraulic grabs -Blade width: 400 mm -Opening width: 1250 mm -Total height: 1580mm -Equipment: Lehnhoff quick-change mount, rotary servo, -Locating bolt: Ø 40 mm -Internal dimension: 155 mm -Dimensions: 1250/400/H1580 mm -Weight: 340kg

Face driver, face driver, face driver, driver tip, face driver, face driver -Manufacturer: ABW, face driver -Type: MS6 -Holder: MK6 / M42, see photos -Total dimensions: Ø 108 x 278 mm -Weight: 7.9kg

Filter bowl, pneumatic filter, filter regulator -Manufacturer: Festo, pneumatic filter type MS6-LF-1/2-CRV -Connection: G1/2 -Pressure: max. 12 bar -Price: per piece -Number: 3 Stück -Dimension box: 280/120/H150 mm -Weight: 0.7 kg/Stück

Angle grinder, cutoff grinder -Grinding wheels: Ø 125 mm -Power: 600 W -Speed: 8500 rpm -Price: per piece -Number: 5 pieces -Dimensions: 280/70/H120 mm -Weight: 2.7 kg/piece

Towing trolleys, cable trolleys, conductor rails and accessories, pantographs, cable trolleys, busbars, pantographs, bridge cranes, hall cranes -Cable trolley for: flat cable -Type: MS1F125-50-G-PM-K -Plastic bag with: 3 pieces -Price: complete -Dimensions: 200/200/H100 mm -Weight: 0.4 kg

Digital scale for press brake, edging bench, guillotine shears ... Glass scale, glass measuring stick, rule, digital display, measuring stick, length measuring system, length measuring device, linear scale, positioning display, digital scales, digital scale for digital display -from: Hammerle AP 100 press brake -Length unit: 420 mm -Number: 2x available -Price: complete -Dimensions: 550/80/H40 mm -Weight: 4.4 kg

Stick electrodes 5.0 x 450 -Type: FOX MST -Price: per package -Number: 2 packages available -Weight per package: 6.2 kg

Glass scale, glass measuring stick, scale, digital display, measuring stick, length measuring system, length measuring device, linear scale, position indicator, digital scales, digital scale for digital display -for: turning and milling machines -Manufacturer: RSF Electronics -Type: MSA370.T4 -Dimensions: 1790/55/H38 mm -Weight: 5.5 kg

4/3 way valve, solenoid valve, hydraulic valve, pressure valve, valve block, control block -Hydraulic control block comes from a TRUMPF punch type Sunimat 400 -Manufacturer: Yuken -Valve type: MSW-01-X-30 -Valve type: FHCG-02-30-N-A100-1004 -Valve type: DSG-01-2B2-A100-5032 -Voltage: V -Pressure: max. bar -Dimensions: 340/290/H360 mm -Weight: 50 kg

Pressure control valve, pressure control directional control valves -Manufacturer: Festo -Type: MS4-LRB-1/4-D6-A8-AS -Operating pressure: 0-10 bar -Number: 1x valves available -Price: per piece -Dimensions: 130/60/H40 mm -Weight: 0.22 kg