westfalia ms used for sale

Solenoid valve, directional control valve FESTO JMEBH-5/2-5,0-B-230AC 173110 1,5 - 8 bar Control solenoid : 2x MSEB-3-230V AC 663955 Control voltage : 198 - 253 V AC 3.0 / 2.4 VA 50 / 60 Hz used, tested ! Dimensions ( valve ): 148 x 18 x 50 mm

METROHM 824 Autosampling Unit. The item comes with the 802 Stirrer, with Easy Controller Keypad (Part Nr. 6.2142.120), with MSB Control Box (Part Nr. 6.214.810) and with 16 position Sample Rack (Part Nr. 6.2041.320)

Offered are 500 pieces of a 3in1 contactless infrared fiber thermometer - new in original packaging -. These come from an overstock at our customer and are currently offered with an MSRP of € 24.99 each. There are a total of approx. 3420 pieces. The 3in1 contactless infrared fiber thermometers are still in the factory near Leipzig (Saxony). The sale takes place ex works EXW (loading possibility available). If the shipping costs are covered, shipping would also be conceivable. We sell the assets on behalf of our customers. The offer prices are gross prices in EURO ex works. The offers are subject to change, subject to error and subject to any prior sale. In this context, we expressly refer to our terms and conditions. We would also like to point out that we expressly exclude a return, a guarantee and a warranty with regard to the assets offered through us.

with different Lehnhoff & Martin mounts in stock, from 30 cm width - 140 cm width in stock - more sizes and variants available on request. more information on our backhoe buckets in stock: 30 cm with Lehnhoff MS01 Symlock mount € 400,- 30 cm with Lehnhoff MS03 Symlock mount € 450,- 40 cm with Lehnhoff MS01 Symlock mount € 430,- 50 cm with Lehnhoff MS03 Symlock mount € 570,- 60 cm with Lehnhoff MS01 Symlock mount € 500,- 60 cm with Martin M03 mount € 500,- 70 cm with Lehnhoff MS03 mount € 680,- stock slope buckets: 100 cm with Lehnhoff MS01 Symlock mount € 590,- 100 cm with Martin M03 mount € 550,- 120 cm with Lehnhoff MS01 Symlock mount € 650,- 140 cm with Lehnhoff MS03 Symlock mount € 790,- 140 cm with Martin M10 mount € 1,120.00

Gear motor SEW-EURODRIVE Type: R37 DT71D4/TF/MSW ( R37DT71D4/TF/MSW ) Power: 0.37 kW Speed: 35 rpm Voltage: 380/415 V New ! Frequency: 50 Hz

Frequency Control Device, Synchronous Relay, Frequency Controller MSR ELEKTRONIK SYNF-2 230 / 400 V 3 VA 50 Hz Relay Output (AC): 250 V 250 W Relay Output (DC): 30 V 30 W used ! Dimensions: 100 x 75 x 110 mm

Time relay EBERLE MSM - 2 ( MSM-2 ) Item no.: 0538 51 641 001 ( 053851641001 ) vers. Voltage 110/220V AC, 24V UC 250 V 5 A time range 0.1s - 999h Dimensions: 105 x 65 x 55 mm

Circuit breaker EAW MS 500/10 ( MS500/10 ) 6170.002 TGL 16563 0,4 - 0,6 A 500 V 50 / 60 Hz IP54 New ! Dimensions: 140 x 75 x 85 mm

Circuit breaker EAW MS 500/10 ( MS500/10 ) 6170.002 TGL 16563 0,6 - 1 A 500 V 50 / 60 Hz IP54 New ! Dimensions: 140 x 75 x 85 mm

Thyristor Switch, Solid State Relay EUROTHERM TE10 A TE10A 25A/400V/0V10/FC/GER/-//MSFUSE/-//00 25 A 400 V AC Control voltage: 0 - 10 V DC See also EL3311 ! used, checked ! Dimensions: 115 x 70x 95 mm

Circuit breaker EAW MS 500/10 ( MS500/10 ) 6170.002 TGL 16563 4 - 6 A 500 V 50 / 60 Hz IP54 New ! Dimensions: 140 x 75 x 85 mm

Single-phase thyristor controller EUROTHERM EFIT/16A/230V EFIT/16A/230V/0V10/FC/ENG/SELF/XX/MSFUSE/-/ 50026340 2450010249 16 A 230 V AC Control voltage: 0 - 10 V DC New, with documents ! Dimensions ( thyristor controller ): 120 x 52 x 95 mm Dimensions ( packaging ): 240 x 125 x 110 mm

Power Supply NSM MAGNETTECHNIK MSJ 220/36 ( MSJ220/36 ) 220 V AC 185 V DC 36 A unused ! Dimensions: 180 x 150 x 170 mm

Single-phase thyristor controller with modular fuse holder EUROTHERM EFIT/16A/230V EFIT/16A/230V/0V10/FC/ENG/SELF/XX/MSFUSE/-/ 230 V AC, 16 A Control voltage: 0 - 10 V DC Modular fuse holder MERSEN, FERRAZ-SHAWMUT UltraSafe US141 750 V AC, max. 50 A for DIN rail mounting New, with documents ! Dimensions ( thyristor controller ): 120 x 52 x 95 mm Dimensions ( fuse holder ): 110 x 27 x 76 mm Dimensions ( packaging ): 240 x 125 x 110 mm

Single-phase thyristor controller with modular fuse holder EUROTHERM EFIT/16A/400V EFIT/16A/400V/0V10/FC/ENG/SELF/XX/MSFUSE/-/ 400 V AC, 16 A Control voltage: 0 - 10 V DC Modular fuse holder MERSEN, FERRAZ-SHAWMUT UltraSafe US141 750 V AC, max. 50 A for DIN rail mounting New, with documents ! Dimensions ( thyristor controller ): 120 x 52 x 95 mm Dimensions ( fuse holder ): 110 x 27 x 76 mm Dimensions ( packaging ): 240 x 125 x 110 mm

Thyristor Switch, Solid State Relay, 3 pieces EUROTHERM TE10 A TE10A 25A/400V/0V10/FC/GER/-//MSFUSE/-//00 25 A 400 V AC Control voltage: 0 - 10 V DC See also EL3010 ! used, checked ! dimensions ( a thyristor switch ): 115 x 70 x 95 mm Dimensions ( packaging ): 210 x 115 x 95 mm

Circuit breaker EAW MS 500/10 ( MS500/10 ) 6170.002 TGL 16563 6 - 10 A 500 V 50 / 60 Hz IP54 New Dimensions: 140 x 75 x 85 mm

Motor circuit breaker EAW, ELECTRICAL SWITCHGEAR GÖRLITZ Ms 500/16 ( MS500/16 ) TGL 26677 10 - 16 A 500 V 50 / 60 Hz IP54 New Dimensions: 150 x 85 x 82 mm

Hydraulic valve, directional control valve BUCHER LD8SE3J25xx-xxx-0M18G12 MSM GAAY035F43D37 12 V DC Connection thread: M18 x 1.5 New ! Dimensions: 225 x 45 x 90 mm

Servo motor with brake, permanent magnet motor REXROTH MSK050C-0600-NN-M1-UG1-NNNN R911298355 6000 RPM 600 V AC IP65 Shaft: Ø 19 mm Flange: 98 x 98 mm used, tested ! Dimensions: 275 x 140 x 100 mm

Solenoid valve, hydraulic valve HAWE G 3-1RL MSMGHAB040L20D04 24 V DC New ! Dimensions: 85 x 45 x 140 mm

Servo motor with brake, permanent magnet motor REXROTH MSK040C-0600-NN-M1-UG1-NNNN R911306061 7500 RPM 600 V AC IP65 Shaft: Ø 14 mm Flange: 82 x 82 mm used, tested ! Dimensions: 250 x 130 x 85 mm

Servo motor with brake, permanent magnet motor REXROTH MSK030C-0900-NN-M1-UG1-NNNN R911308684 9000 RPM 600 V AC IP65 Shaft: Ø 9 mm Flange: 54 x 54 mm used, tested ! Dimensions: 235 x 100 x 55 mm

Servo motor with brake, permanent magnet motor REXROTH MSK101E-0300-NN-M1-AG3-NNNN R911311633 4600 U/min 600 V AC IP65 Shaft: Ø 38 mm Flange: 192 x 192 mm used, tested ! Dimensions: 600 x 260 x 195 mm

Servo motor with brake, permanent magnet motor REXROTH MSK101E-0300-NN-M1-BG3-NNNN R911323278 4600 U/min 600 V AC IP65 Shaft: Ø 38 mm Flange: 192 x 192 mm used, tested ! Dimensions: 600 x 260 x 195 mm

Servo motor with brake, permanent magnet motor REXROTH MSK101D-0300-NN-M1-AG3-NNNN R911315798 4600 U/min 600 V AC IP65 Shaft: Ø 38 mm Flange: 192 x 192 mm used, tested ! Dimensions: 510 x 260 x 195 mm

Hydraulic valve, directional control valve BUCHER LC8SE3J10xx-xxx-0M18G12 MSM GRFY035F20E63 12 V DC Connection thread: M18 x 1.5 New ! Dimensions: 265 x 45 x 105 mm

Servo motor, permanent magnet motor REXROTH MSK061C-0600-NN-M1-UG1-NNNN R911315844 6000 Unnn /min 600 V AC IP65 Shaft: Ø 19 mm Flange: 115 x 115 mm New ! Dimensions: 320 x 115 x 160 mm

Hook Harness, Bottom Bottle, Crane Bottle, Hook Bottle DEMAG 250 kg MSLH - 250 ( MSLH-250 ) DEMAG-V-2 RS BH Mounting bolt: Ø 20 mm with single hook New ! Dimensions: 170 x 55 x 60 mm

Servo motor with brake, permanent magnet motor REXROTH MSK030C-0900-NN-M1-UG1-NNNN R911308684 9000 RPM 600 V 3AC IP65 Shaft: Ø 9 mm Flange: 54 x 54 mm used, tested ! Dimensions: 235 x 55 x 100 mm

Solenoid valve, directional control valve FESTO MVH-5/3-G-1/4-B 19138 3 - 10 bar 2 x MSV-3 119807 20.4 - 26.4 V DC unused ! Dimensions: 260 x 60 x 35 mm

Servo motor with brake, permanent magnet motor REXROTH MSK101D-0300-NN-M1-AG3-NNNN R911315798 4600 U/min 600 V 3AC IP65 Shaft: Ø 38 mm Flange: 192 x 192 mm used, tested ! Dimensions: 510 x 195 x 265 mm

coolant filter system, coolant system, filter system MZ, FILTER TECHNOLOGY WEIDA EMA 200 coolant tank: 1290 x 610 x 350 mm ( approx. 250 l ) magnetic roller: Ø 130 mm x 450 mm speed: 440 rpm engine: MS562-4 0,0,09 kW 1320 rpm 220 / 380 V 3AC K&S PG056 Gear ratio: 3 coolant pump1: Engine: MEZ BRNO 4AP71-2S 0,37 kW 2800 rpm 220 / 380 V 3AC coolant pump2: Motor: IMB14-71x0,37x3000 0,37 kW 2850 rpm 220 / 380 V 3AC used, tested ! Dimensions: 1210 x 600 x 510 mm

Servo motor with brake, permanent magnet motor REXROTH MSK040C-0600-NN-M1-UG1-NNNN R911306061 7500 U /min 600 V 3AC IP65 Shaft: Ø 14 mm Flange: 82 x 82 mm used, tested ! Dimensions: 250 x 85 x 125 mm

x-travel: 800 mm y-travel: 410 mm z-travel: 510 mm control: MSC- 500 table-size: 900 x 450 mm table load: 700 kg Distance spindle nose and table: SK 40 no. of tools in the magazine: 20 Stück turning speeds: 8000 U/min power capacity: 7,5 kW rapid travel x/y/z: 20/20/15 m/min feed: 0- 5 m/min weight: 6,3 kg dimensions: 2,6 x 2,6 x 2,77 m 3 axis Vertical Machining Center in good condition, attached 4th/5th axis, - 4th and 5th axis with own control - tool changer double arm gripper - signal lamp The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Servo motor with brake, permanent magnet motor REXROTH MSK101E-0300-NN-M1-AG3-NNNN R911311633 4600 U/min 600 V 3AC IP65 Shaft: Ø 38 mm Flange: 192 x 192 mm used, tested ! Dimensions: 600 x 195 x 265 mm

Key data: 510 mm, 510 mm, 510 mm

Machine Details Stock-No. 1105-03907 Type of machine Machining Center - Vertical Make MORI SEIKI Type CV 500 Year of manufacture 1998 Type of control CNC Storage location HAGUENAU FRANCE Country of origin Japan Delivery time CALL ME Freight basis EXW (Incoterms 2010) loaded on Technical details X-Travel 510 mm Y-Travel 510 mm Z-Travel 510 mm control MSC 803 number of spindle speeds 8000 spindle drive 7.5 kW Rapid Travel X/Y/Z 42/32 mm/min table-size 750 X 550 mm tool changing time 1.5 sec tool magazine: 25 BT 40 total power requirement 51 kW Weight of the machine approx. 4 t Accessories Memory 640 m Helical Interpolation Cylinder interpolation Additional information ROTARY DOUBLE TABLE CNC MSG 803 Technical details and information subject to amendments and errors.

Gear motor SEW R37 DT71D4/TF/MSW ( R37DT71D4/TF/MSW ) 0.37 kW 35 rpm 380 V IP55 shaft diameter: Ø 25 mm used, tested ! top condition ! Dimensions: 410 x 230 x 170 mm

Mori Seiki ZT 1500 YB horizontal bar-loading lathe :::SPECIFICATIONS::: CNC Model: Mori Seiki CNC version: MSX 501 Main spindle nose: ASA 6 Main spindle power: 22Kw Main spindle bar clearance: 65mm Turning diameter: 190mm Turning length: 235mm Main spindle revolutions: 5000 Number of tool turrets: 2 Number of tool places before turret: 16 Number of motorized first turret: 16 First turret tool attachment type: VDI 30 X axis travel first turret: 140mm Y axis travel first turret: +- 50mm Z axis travel first turret: 700mm Number of tool spaces second turret: 16 Number of motorized second turret: 16 Second turret tool attachment type: VDI 30 X axis travel second turret: 140mm Second turret Z Axis Stroke: 690mm Rapid feeds linear axes X Y Z: 24m/min Counter-spindle: yes Spindle nose: ASA 6 Number of counterspindle r ...

Geared motor with brake and MOVI-SWITCH SEW R37DT80K4/BMG/HR/TF/MSW/RE1A/ASAW 0,55 kW 47 rpm 400 V IP54 shaft diameter: Ø 25 mm with MOVI-SWITCH ! used, checked ! Dimensions: 520 x 260 x 200 mm

Key data: 560 mm, 510 mm, 510 mm

Machine Details Stock-No. 1105-03918 Type of machine Machining Center - Horizontal Make MORI SEIKI Type SH 400 Year of manufacture 1997 Type of control CNC Storage location HAGUENAU FRANCE Country of origin Japan Delivery time immediately Freight basis EX WORK Price Technical details X-Travel 560 mm Y-Travel 510 mm Z-Travel 510 mm control Fanuc MSC 502 (Fanuc 16i) spindle speeds 10000 rpm spindle drive 22 kW Rapid Travel X/Y/Z 32 mm/min Number of tool station 60 SK40 Pallet dimension 2 x 400x400 mm table load 0,5 t working diameter max. 580 mm table index 1 ° total power requirement 56 kVA Weight of the machine approx. 8.7 t dimensions of the machine approx. 2.9x4.1 m Accessories Chip conveyor Coolant Gun Coolant shower No. of tool offset pairs 200 Probe for tool breakage and length measuring Tool life management offsets for parts 56 High spee ...

Geared motor with brake and MOVI-SWITCH SEW R57DT80K4/BMG/HR/TF/MSW/RH1A/ASA/3AVS1 0,0,55 kW 11 rpm 400 V IP54 shaft diameter: Ø 35 mm with MOVI-SWITCH ! used, checked ! Dimensions: 570 x 298 x 190 mm

Key data: 1050 mm, 510 mm, 510 mm

Machine Details Stock-No. 1105-03920 Type of machine Machining Center - Vertical Make MORI SEIKI Type NV 5000 B / 40 Year of manufacture 2004 Type of control CNC Storage location HAGUENAU FRANCE Country of origin Japan Delivery time on request Freight basis ex location Technical details x-travel 1050 mm Y-Travel 510 mm Z-Travel 510 mm Control FANUC MSG 501 turning speeds 12000 rpm tool change unit 30 table-size 1100x600 mm Drive 18,5/11 kW tool taper BT 40 transmission ratio 1 spindle diameter in front bearing 65 mm table load 1000 kg T-slots 6x18x100 mm distance spindle /table 150-660 mm max. tool diameter 80 mm max. tool-dia with free toolbox 125 mm max. tool weight 8.0 kg Change-time tool to tool approx. 1.0 sec Change-time chip to chip approx. 2.6 sec Rapid Traverse 42 m/min feed speeds 1-6000 mm/min total power requirement 48 kVA Weight of the mac ...

Variable geared motor, two speed ranges ARTER Type: MSR 47-U8 3,6 - 106 / 15 - 450 rpm Component: KISSLING & CO Type : U8 Engine: EMOD Type: 90L-8/2 0.3 / 1.1 kW 680 / 2880 rpm 380 V 3AC Shaft diameter: Ø 25 mm used, tested ! Dimensions: 800 x 250 x 280 mm

Manufacturer: MSK, Type: 290, Year: 1989, Cycles approx.: max ca. 240 / h, Electrical power shrinking tunnel kW: 366 kW - Gas, Through running hight mm: 2200, Working width mm: 800, Länge max 1200 mm, Year :1989

Shaft with tool holder MK4 PAGUS tool holder MK4 345756 60.000000.00200 2 Ball bearing sets: Ø 90 / 80 mm Flange diameter: Ø 115 mm New ! Dimensions: 250 x 115 x 155 mm

turning diameter: max. 450 mm turning length: 450 mm control: MSC 518 swing dia. over bed: 520 mm Main spindle:: turning speed range - main spindle: 28 - 2.800 min/-1 power capacity - main spindel: 15 / 11 kW spindle bore: 105 mm Bar feed: 89 mm spindle nose: JIS A2-8 turret:: number of toolpositions: 10 pos. Shank height for square tool: 25 mm Drill shank diameter: 50 mm change time: 0,5 sec axis stroke:: x-axis: 260 (225 + 35) mm z-axis: 500 mm feeds:: rapid traverse: X/Z: 15 / 20 m/min Tipp feed: 0 - 1.260 mm/min total power requirement: 28 kVA weight of the machine ca.: 4,0 t dimensions of the machine ca.: 3,0 x 2,0 x 2,2 m Documents: Turret: Chip conveyor: Coolantsystem: hydraulic system: tool setting: div. tool holder: CNC - Lathe MORI SEIKI - CL 25 B The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Coupling box, 8 pieces FESTO KD-1/4-S 151776 Operating pressure: max. 35 bar nominal diameter e: 5 mm male thread: G 1/4 ( inch ) width across flats: 24 mm Material: nickel-plated brass similar landing field KDG 14 NW5 MSV Other quantities on request New ! Dimensions ( coupling box ): 60 x 30 x 30 mm

Solenoid valve, directional control valve FESTO JMVH-5-1/4-B 19136 2 - 10 bar 2 x MSV-3 119807 20.4 - 26.4 V DC used, tested ! Dimensions: 260 x 130 x 35 mm

radial tool holder, with internal cooling VDI 40 for Mazak Condition : new Warranty : 12 months Radial version // 90 degrees ( angled holder ) Manufacturer: RGX- Tools SKU: RGX1-40/221-32/2.1-130MZ2 Tool holder: Collet ER 32 Internal cooling : yes ; 20 bar Height : 130 mm max. torque : 50 Nm Compatible with the following machines Mazak ᐳ QT 200 M/MS/MY/MSY (STAR) ᐳ ALL TYPE ᐳ ALL TYPE Mazak ᐳ QT 200 M/MS/MY/MSY (STAR) ᐳ LIVE TOOLS ᐳ ANGULAR Mazak ᐳ QT 250 M/MS/MY/MSY (STAR) ᐳ ALL TYPE ᐳ ALL TYPE Mazak ᐳ QT 250 M/MS/MY/MSY (STAR) ᐳ LIVE TOOLS ᐳ ANGULAR Mazak ᐳ QTN 200 M/MS/MY/MSY (STAR) ᐳ ALL TYPE ᐳ ALL TYPE Mazak ᐳ QTN 200 M/MS/MY/MSY (STAR) ᐳ LIVE TOOLS ᐳ ANGULAR Mazak ᐳ QTN 250 M/MS/MY/MSY (STAR) ᐳ ALL TYPE ᐳ ALL TYPE Mazak ᐳ QTN 250 M/MS/MY/MSY (STAR) ᐳ LIVE TOOLS ᐳ ANGULAR Mazak ᐳ SQT 15 M/MS/M ...