westfalia ms used for sale

Three-phase motor, electric motor -Power: 9.2 kW -Speed: 2920 rpm -Shaft: Ø 42 mm -Construction: B3 -Protection class: IP 33 -Dimensions: 560/330/H270 mm -Weight: 80 kg

PTC thermistor relay, contactor, semiconductor contactor, contactor, relay, PTC thermistor tripping device -Manufacturer: Ziehl, thermistor relay thermistor triggering device unused in original packaging -Type: MSF 220K -Item no.: T 221715 -Quantity: 1 piece available -Dimensions of box: 120/80/H25 mm -Weight: 0.2 kg

feed pressure: 10,0 bar Effective free air delivery: 1.680 L/min motor: 400 V 0: 500 Liter weight of the machine ca.: 348 kg. total power requirement: 15,0 kW range L-W-H: 1240 x 650 x 950 mm Exhibition machine / not yet in use new BOGE SOLID model series List price: 7.476 euros Made in Germany Furnishing: - with container and dryer / can be used immediately - Microprocessor control SOLID base control - Network pressure sensor - Belt driven drive system - low compressed air temperature due to effective aftercooler - lying underneath compressed air tank - including cold compressed air dryer automatically working with pre- and post-filter ( mounted ) (also available with 7.5 bar) The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Measuring machine, coordinate measuring machine, thread measuring machine, Master Scanner -Manufacturer: IAC, measuring machine Master Scanner -Type: MSXP 60x25 -Accessories: including calibration and measuring accessories / technical documentation, see photos -Transport dimensions: 900/400/H700 mm -Total weight: 159 kg

OKUNO MSC-15 spring coiling machine was manufactured in 1998 in Japan by OKUNO Machine Co. The machine designed for the efficient production of springs from wire with a maximum thickness of 0.3 mm, consists of a wire spool rack with a braking system, a heating device for annealing and a forming machine. The wire processing process begins with taking material from a spool mounted on the machine stand, which is then fed into the heating device to anneal both ends of the spool. The pre-treated material is then fed further into the forming machine, where it is shaped into a spring by automatic cutting and bending. The length of wire feed is regulated by a digital indicator located on the machine frame. Technical data of the OKUNO MSC-15 spring coiling machine - maximum wire feeding length: 10m ± 5 mm - thickness of material: 0.15 – 0.3 mm - material width: 5.0 – 15.0 mm - maxi ...

Machine description - screw diameter: 40 mm - screw L / D: 22: 1 - injection weight (HDPE): 190 g - maximum speed of the screw: 10-225 rpm. - heating power: 8.3 kW - injection clamping force: 292 kN - blow clamping force: 46.7 kN - maximum plate size (L x W): 400 × 270 mm - minimum mold thickness (H): 180 mm - mold heating capacity: 3 kW - opening: 220 mm - drying cycle: 3.5 sec. - engine power: 15 kW - hydraulic pressure: 15 MPa - suitable bottle range: 3-800 ml - maximum bottle height: ≤190 mm - maximum bottle diameter: ≤100 mm - minimum air pressure: 1MPa - compressed air discharge rate: ≥0.7 M3 / mm - water flow: 3 M3 / h - total rated power with mold heating: 26.3 kW Year of production 2015 Dimensions 326x120x220 [cm] Weight 4000 [kg]

Extrusion blow molding machine for polyethylene and/or polypropylene containers up to 1 liter capacity. Spindle diameter 48 L/D 24 A station. W. MÜLLER single outlet head with thickness regulator. Automatic deburring. Ordered delivery by extraction clamp on conveyor. Integrated pore checker. Incandescent cut.

Welding machine, plastic welding machine, plastic socket welding machine, plastic welding machine, PE pipe welding machine, plastic pipe welder, socket welding tool set -Manufacturer: Georg Fischer GF, socket welding tool set type MSE 110 E -Voltage: 230V -Power: 1500W -Temperature range: up to 290°C -Sleeves: Ø 16 - 110 mm, see photo -Dimension box: 600/330/H120 mm -Weight: 15.8 kg

Sakurai Maestro 102A2 2xUV DRYER Year of construction 2008

GE MS5000P Nominal Pot 20.000kw each , 1600 work hours

Inv. Num. : 7253 Type: MSF 9001.25Lr T500 Producer: Microstep Created: 2015, GO 2022 Parameters: Laser power: 10 kW Work table length: 9000 mm Work table width: 2500 mm Maximum sheet thickness when cutting (stainless steel): 25 mm Source: nLight CORONA-CFX-10000 Positioning speed: 130 m/min Laser head: Thermacut EX-TRABEAM-Pro-360 Machine height: 2570 mm Machine length: 23000 mm Machine width: 6000 mm Equipment: Technical Documentation Point Laser Sight Camera in the head Protective glass against lens contamination Remote support Adaptive Cutting Automatic alignment of sheet rotation LED Control Panel Automatic nozzle cleaning Calibration station Pallet Table Changer 2 Tables Intake segments under the grate 1x socket Automatic chip conveyor Automatic suction 2x Asper Licenses

ID2753 Müller MS16 HFV year/Year of construction 1999 approx. 3900 hours/hours 3.5 t Vibrator, with hydraulic unit MS-A360V, clamps MSU140 for steel sheet piles and 30 m of hydraulic hoses Vibrator, with hydraulic power unit MS-A360V, clamps MSU140 for steel sheet piles and 30 m of hydraulic hoses

number of grinding wheels 3 + 1

Digital ruler for press brakes, bending benches, guillotine shears... Glass ruler, glass measuring rod, scale, digital display, measuring rod, length measuring system, length measuring device, linear scale, positioning display, digital scales, linear encoder -Manufacturer: RSF Elektronik, linear encoder from press brake HACO type PPES 30135 -Type: MSA 3502 -Measuring length: approx. 270 mm -Quantity: 2x encoders available -Price per piece -Dimensions: 500/150/H50 mm -Weight: 5.4 kg/pc.

Agilent 5975C inert MSD with GC 6890N Agilent 5975 C inert MSD, Agilent GC 6890 N Pfeiffer Turbomolecular Pump, Electronic Ionization/EI ; GC Injector Split/splitless, EPC, LAN Agilent Backing Pump, Software Agilent MSD Chemstation for Win10

Used Compressor Siad 1999 Looking for a reliable compressor to meet your high pressure needs We have just the machine for you a SIAD MS2 1242 B2 compressor manufactured in 1999 with only 238 operating hours This compressor is an excellent choice for those requiring powerful dependable and high pressure capable machinery The SIAD is equipped with a single stage and delivers a pressure output of 50 bar with a power output of 299 9 kW It s ideal for heavy duty high pressure applications in a range of industrial processes The compressor comes with built in safety features and manuals are provided for troubleshooting if required This compressor is currently in storage and has been well maintained With dimensions of L 5900 mm W 3000 mm H 2500 mm it fits well in any industrial space It is a versatile machine that can handle various applications making it suitable for use in multiple industries  ...

NEW, 40 cm wide, with MS01 Symlock mount, 47 kg net weight, suitable for 1.9 - 2.7 t excavators

Offer 23402 Specifications: - Roll diameter 420 mm - Projection 400 mm - Max. passage height 325 mm - Table size 600 x 600 mm - Table tiltable left / right 10° / 45 ° - Table height from the floor approx. 1030 mm - Saw blade length 3450 - 3640 mm - Bandwidth max. 25 mm - Infinitely variable belt speed 15 - 1500 m/min - Drive 400 V / 1.5 kW - Weight approx. 500 kg - Space requirement approx. W 800 x H 1850 x D 1000 mm - With: - Saw blade welder IDEAL -Lighting

Bending tool, die, lower tool, die tool, folding tool, press tool, forming tool -Die tool: forming tool / press tool adapter MST Ø 85 -Receptacle: Ø 40 mm -Receiving thread: M34 -Dimensions: Ø 85 x 160 mm -Weight: 4.5 kg

General SKU305U629 LocationBarneveld MakeVibrowest TypeMSC 24 EX/S No.11501 Year of construction2015 Main Features MaterialStainless steel Surface0.28 m2 Sizes diameter600 mm Specified Features - Vibro sieve Vibro sievecheck Sieve surface0,28 m² Number of sieve decks:1 Sieve sizesDia: 600 mm With covercheck InletDia: 200 mm OutletDia: 200/140 mm Drive vibro motor0,30 kW, 230/400 volt (Ex) (2x) Sieve perforation0,8x0,8 mm With ball cleaningcheck MaterialStainless steel 1.4301 (304) Information Mounted on mild steel framecheck Total height0,77 m Weight170 kg CEcheck Floor space1,2x0,70 m ATEX compatiblecheckMinerals & inorganicPlastic & polymersOther feedAnimal feedSugarPowdered foodsVibro sievesFeed additivesVibrowestIndustries > Chemical > Minerals & inorganicIndustries > Chemical > Plastic & polymersIndustries > Food & Feed > Other feedIndustries > Food &  ...

General SKU360U982 LocationBarneveld MakePharmastill TypeMS103S No.4231BIS Year of construction1990 Technical specs Max. temperature153 °C Main Features MaterialStainless steel Specified Features - Distillation Distillation installationcheck Number of columns:3 With jacketcheck Electric heatedcheck With pumpcheck MaterialStainless steel 1.4404 (316L), Stainless steel 1.4571 (316Ti) Distillation Filtercheck Information Total height2,55 m Weight1000kg Floorspace3,0x1 m Extra SpecificationsWFI system, With 3x Stilmas reboiler, tubes 14 ltr, 9 bar, temp 180°C, shell 5 ltr, 9 bar, temp 180°C,, Grundfos water pump skid, type CRN2, 2x service heating units op skid, control cabinet pharmastill WFI ms103s information: heating steam: 4,5bar- temperature: 153°C feed water: 225Ltr/h- pressure 6 bar- temperature 20°C cooling water: 150Ltr/h- pressure 3 bar- inlet temp 19 ...

General SKU412T1302 LocationBarneveld MakeFryma Maschinen GmbH Rheinfelden TypeMSM-12 No.M13585 Year of construction1989 Pressure Working pressure2.5 Bar Working pressure jacket2 Bar Main Features MaterialStainless steel Volume0.5 Ltr. Motor3 KW Specified Features - Sand mill MaterialStainless steel Attritorcheck Vertical sandmillCoBall mill (1x) Capacity± 0.5 Ltr. Housing dimensions Dia 140x90 mm Inlet20 mm Motor3 kW (Loger DNGW-100) With variable speed drivecheck Rotor speed1100-2648 rpm Capacity5-40 Ltr./h (depending on product) With pumpcheck (Loher LP-A) Motor0,25 kW Information Mounted on framecheck Mounted on wheelscheck With switchcheck With switchgearcheck ( as is) Floorspace1,4x0,8 m Total height1,65 m Weight310 kgSand millsFrymaMills > Sand millsBrand > Fryma What you can expect from Foeth: -- Machine is in working condition -- At a reduced  ...

General SKU270T599 LocationBarneveld MakeFryma-Maschinen AG TypeMSZ 50 No.M13144 Year of construction1988 Pressure Working pressure2.5 Bar Working pressure jacket2.5 Bar Main Features MaterialMild steel Volume6 Ltr. Motor36 KW Specified Features - Sand mill MaterialMild steel Vertical sandmillcheck Capacity6,0 Ltr Housing dimensions dia. 520x300mm With mechanical sealcheck With jacketcheck Rotor jacketedcheck Motor36 kW 380 Volt (Ex) With pumpcheck Motor0,25 kW 220/380 Volt (mechanical seal pump) Information Total height2,4 m Weight1200 kg Floorspace1,9x1,2 mSand millsFrymaMills > Sand millsBrand > Fryma What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in Barneveld, The Netherlands. Please visit us in Barneveld f ...

General SKU212T470 LocationBarneveld MakeDidier Filtertechnik GMBH TypeMSF 600/F No.HW-16657 Year of construction2003 Pressure Working pressure6 Bar Main Features MaterialStainless steel Pressure6 Bar Vacuumcheck Surface3.1 m2 Specified Features - Horizontal plate filter Filter surface3,1 m² Horizontal plate filters Filter presscheck Filter surface3,1 m² Stainless steel platescheck Number of platens12 Internal platen sizesDia: 564 mm External platen sizesDia: 604 mm Platen thickness48 mm Frame thickness38 mm Cake capacity112 Ltr. Central inletcheck ConnectionsDN 25 (2x) With outlets on platenscheck With hand valvescheck Hydraulic closingcheck With hydraulic unitcheck manual Mechanical closingcheck MaterialStainless steel 1.4571 (316Ti) Information Mounted on wheelscheck Total height2,4m Weight1000 kg CEcheck Floorspace1.5x1 mHorizontal plate filt ...

General SKU056Z222 LocationBarneveld MakeFryma Maschinen AG TypeMSZ-32 No.F 50.6189 Year of construction1982 Material Housing materialMild steel Pressure Working pressure2.5 Bar Working pressure jacket2 Bar Main Features MaterialMild steel Volume3 Ltr. Motor18.5 KW Specified Features - Sand mill MaterialMild steel Vertical sandmillCoBall mill (1x) Capacitygrinding chamber 3,0 Ltr Housing dimensions dia. 350mm, Rotor dia. 330mm With mechanical sealcheck With jacketcheck Rotor jacketedcheck Motor18,5 KW, 380 Volt Capacity90-180 Ltr/Hr (paint/varnish) With pumptype KF 1/8 Motor0,37 KW With variable speed drivecheck Information Floorspace1,4x0,8 M Total height1,8 M Weight860 KG Technical specs Extra information Rotor dia. 330mmSand millsFrymaMills > Sand millsBrand > Fryma What you can expect from Foeth: -- Machine is in working condition -- At a reduced pr ...

General SKU070C324 LocationBarneveld MakeFryma Maschinen AG Rheinfelden TypeMSM-12 No.F-086132 Year of construction1982 Material Housing materialMild steel Pressure Working pressure1.5 Bar Working pressure jacket0.5 Bar Main Features MaterialMild steel Volume0.5 Ltr. Motor3 KW Specified Features - Sand mill MaterialMild steel Vertical sandmillCoBall mill (1x) Capacity0,54 Ltr Housing dimensions dia. 140x90mm, Rotor dia. ± 129mm With mechanical sealcheck With jacketcheck Motor3,0 KW, 220/380 Volt (IP44) With variable speed drivecheck Rotor speed± 1100-2650 Rpm Capacity10-20 Ltr/Hr (paint/varnish) Information Floorspace0,7x0,5 M Total height0,8 M Technical specs Extra informationRotor dia. ± 129mmSand millsFrymaMills > Sand millsBrand > Fryma What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready  ...

General SKUR0242 LocationBarneveld MakeFryma Machinenbau GmbH TypeMSZ-32 No.M 15127 Year of construction1991 Pressure Working pressure2.5 Bar Working pressure jacket2 Bar Main Features MaterialMild steel Volume3 Ltr. Motor30 KW Specified Features - Sand mill MaterialMild steel Vertical sandmillCoball- Mill Capacitygrinding chamber 3 ltr. Housing dimensions dia. 350mm, rotor dia. 330mm Inletdia. 32mm Outletdia. 25mm With mechanical sealcheck With jacketcheck Rotor jacketedcheck Motor30 kW 380 Volt With pumpcheck Information With switchgearcheck Total height1,9 M Weight900 Kg Floorspace1,5x1,1 MSand millsFrymaMills > Sand millsBrand > Fryma What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in Barneveld, The Nether ...

General SKU070C323 LocationBarneveld MakeFryma Maschinen AG Rheinfelden TypeMSM-32 No.M-10922 Year of construction1984 Pressure Working pressure2.5 Bar Working pressure jacket2 Bar Main Features MaterialMild steel Volume2.4 Ltr. Motor22 KW Specified Features - Sand mill MaterialMild steel Vertical sandmillCoBall mill (1x) Capacity2,42 Ltr Housing dimensions dia. 350x210mm, Rotor dia. 340mm With mechanical sealcheck With jacketcheck Rotor jacketedcheck Motor22,0 KW, 380/660 Volt (IP54) Rotor speed± 580 Rpm Capacity90-180 Ltr/Hr (paint/varnishes) Information With switchcheck Floorspace1,4x0,8 M Total height1,7 M Technical specs Extra informationRotor dia. 340mmSand millsFrymaMills > Sand millsBrand > Fryma What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwid ...

General SKU309S509 LocationBarneveld MakeFryma Maschinen AG (CH) TypeMSS-18 No.M14237 Year of construction1990 Pressure Working pressure2.5 Bar Working pressure jacket2 Bar Main Features MaterialStainless steel Volume1.1 Ltr. Motor5.5 KW Specified Features - Sand mill MaterialStainless steel Vertical sandmillcheck Capacity1,1 Ltr. Housing dimensions dia. 200x135mm Inletdia. 12mm Outletdia. 12mm With mechanical sealcheck With jacket(0,12 m2) Rotor jacketed(0,06 m2) Motor5,5 kW 380 Volt With balls(Soda Glass) Natronglas 1,2-1,4mm With pumphose (peristaltic) pump. Motor0.25 kW 380/220 Volt Information With switchcheck Floorspace1,3x0,9 M Total height1,7 M Weight350 KgSand millsFrymaMills > Sand millsBrand > Fryma What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination w ...

General SKU016G043 LocationBarneveld MakeFryma AG Rheinfelden TypeMSZ-12 No.M-15149 Year of construction1991 Material Housing materialMild steel Pressure Working pressure2.5 Bar Working pressure jacket2 Bar Main Features MaterialMild steel Volume0.5 Ltr. Motor3 KW Specified Features - Sand mill MaterialMild steel Vertical sandmillCoBall mill (1x) Capacity0,54 Ltr Housing dimensions dia. 140x90mm With mechanical sealcheck With jacketcheck Motor± 3,0 KW, 380 Volt (Ex) With variable speed drivecheck Capacity10-20 Ltr/Hr (paint/varnish) With pumpcheck Motorcheck Information With switchcheck Floorspace1,0x0,6 M Total height0,8 M Weight200 KG ATEX compatiblecheckSand millsFrymaMills > Sand millsBrand > Fryma What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwi ...

General SKU016G067 LocationBarneveld MakeFryma Maschinen AG Rheinfelden TypeMSZ-50 No.M-14190 Year of construction1990, Grinding chamber needs to be replaced Material Housing materialMild steel Pressure Working pressure2.5 Bar Working pressure jacket2 Bar Main Features MaterialMild steel Volume6 Ltr. Motor45 KW Specified Features - Sand mill MaterialMild steel Vertical sandmillCoBall mill (1x) Capacity6,0 Ltr Housing dimensions dia. 520x300mm With mechanical sealcheck With jacketcheck Rotor jacketedcheck Motor45,0 KW, 380 Volt (Ex) With pumpcheck Motor0,75 KW, 230/400 Volt (Ex) With variable speed drivecheck Information With switchcheck Floorspace1,9x1,2 M Total height2,4 M ATEX compatiblecheck Extra Specifications-- RECONDITIONED -- ReconditionedSand millsFrymaReconditionedMills > Sand millsBrand > Fryma What you can expect from Foeth: -- Machine is in  ...

General SKU016G068 LocationBarneveld MakeFryma Maschinen AG Rheinfelden TypeMSZ-50 No.M-14189 Year of construction1990 Pressure Working pressure2.5 Bar Working pressure jacket2 Bar Main Features MaterialMild steel Volume6 Ltr. Motor45 KW Specified Features - Sand mill MaterialMild steel Vertical sandmillCoBall mill (1x) Capacity6,0 Ltr Housing dimensions dia. 520x300mm With mechanical sealcheck With jacketcheck Rotor jacketedcheck Motor± 45,0 KW, 380 Volt (Ex) With pumpcheck With variable speed drivecheck Information With switchcheck Floorspace1,9x1,2 M Total height2,4 M ATEX compatiblecheck Extra Specifications-- RECONDITIONED -- ReconditionedSand millsFrymaReconditionedMills > Sand millsBrand > Fryma What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide  ...

General SKU274K293 LocationBarneveld MakeFryma Maschinenbau GmbH Rheinfelden TypeMSZ-12 No.M-12360 Year of construction1986 Pressure Working pressure2.5 Bar Main Features MaterialMild steel Volume0.5 Ltr. Motor2.2 KW Specified Features - Sand mill MaterialMild steel Vertical sandmillCoBall mill (1x) Capacity0,5 Ltr With mechanical sealcheck With jacketcheck Rotor jacketed2 bar Motor2,2 KW, 220/380 Volt (Ex) Capacity10-20 Ltr/Hr (paint/varnish) With pumpcheck Motor0,08 KW, 220/380 Volt (Ex) With variable speed drivecheck Information With switchcheck Floorspace0,7x0,6 M Total height0,8 M ATEX compatiblecheckSand millsFrymaMills > Sand millsBrand > Fryma What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in Barneveld ...

General SKU041H138 LocationBarneveld MakeFryma Maschinen GmbH Rheinfelden TypeMSM-12 No.L-14038 Year of construction1993 Pressure Working pressure2.5 Bar Working pressure jacket2 Bar Main Features MaterialStainless steel Volume0.5 Ltr. Motor3 KW Specified Features - Sand mill MaterialStainless steel Attritorcheck Vertical sandmillCoBall mill (1x) Capacity± 0,5 Ltr Housing dimensions dia. 140x90mm With mechanical sealcheck With jacketcheck Rotor jacketedcheck Motor3 kW, 380 Volt (Ex) With variable speed drivecheck Capacity10-20 Ltr/Hr (paint/varnish) With pumpcheck With variable speed drivecheck Information With switchcheck With switchgearcheck (as is) Floorspace0,9x0,6 m Total height0,8 m Weight220 kg ATEX compatiblecheckSand millsFrymaMills > Sand millsBrand > Fryma What you can expect from Foeth: -- Machine is in working condition -- At a reduced pri ...

Italtech 5500 Tons injection molding machine, overhauled in 2015, changed with a new motor, inverter, PLC and screw chamber, screw diameter 220 mm, injection volume 66904 cm3, injection capacity polystyrene base 57,54 kg., pressure bar 1450 bar, mold thickness max - min 2500 - 800 mm, passage between columns 2200 x 2200 mm, dimensions of the shelves 3480 x 3480 mm, column diameter 465 mm, total weight 344 tons, dimensions 24.5 x 4.8 x 4.7 m.

200 cm working width, with Lehnhoff MS21 mount, mount width: 510 mm, bolt diameter 80 mm, embankment bucket suitable for 30 - 40 t excavators,

140 cm working width, mounting width: 510 mm, bolt diameter 80 mm, other buckets with Lehnhoff MS21 mounting in stock!

Volume bucket 180 cm working width suitable for 30-40 t excavators, with Lehnhoff MS21 mount, mount width: 510 mm, bolt diameter 80 mm,

CNC turning lathe Brand: DMG Mori Model: MSL 60 Year of manufacture: 2010, Bar passage: 60 mm, C axis, 7 axes, Sub-spindle integrated in main turret for second operations, 2 turrets, Stationary tools on comb head, Battery tools second operations, Possibility of 4 tools machining simultaneously, CNC: Fanuc 31i, Main motor: 7.5 kW, Main spindle speed: 5000 rpm, Bar loader interface, Parts collector, Main clamp holder and secondary integrated head, Inspectable by a qualified technician, working

We are selling here a tilting cooking kettle from the manufacturer Electrolux, type 100 L in a very good used and functional condition. Runs on 400 volts, 18.2 kW, built in 2007, completely stainless steel, electric tilting, programmable, 100 liters capacity, workshop tested, ready for immediate use, dimensions W/D/H 120/100/90 cm, others on request.

Double-saw mitre saw Hoffmann MS35-SF 45° bevel cuts Saw motor 2×1.8kw Saw blade speed 3000r.p.m Saw blade size 350mm, hole 30mm Working width max 80mm Working height max 80mm Dovetail milling units 2×0.5kw Rotational speed of milling machines 19.000r.p.m Two milling positions can be set Working pressure 6bar CE Certified Extraction pipes 2x120mm DTR Documentation Weight: about 800kg Total dimensions of the machine including tables 520x92x170cmH

General SKU254S218 LocationBarneveld MakeNormag Labor und Prozesstechnik GmbH (D) TypeMSB DN70/50 Mixer-settler No.A 1601412 Year of construction2017 Main Features MaterialGlass Volume40 Ltr. Specified Features - Varias mezcladoras MaterialGlass Capacity4x 10 Ltr. Information Total height1,6 M Weight240 Kg CEcheck Floor space1,3x1,3 M Extra SpecificationsThis is a laboratory test set-up for aqueous solutions. Consisting of four glass Normag vessels of approximately 10 liters (-1/0.5 bar max 100 degrees C) Thin liquid liquid can be pumped by means of 2 Fink Chem + Tec membrane dosing pumps type R05-120 with a capacity between 0.12 and 120 ml/min. Two double-walled process vessels of approximately 350 ml are placed on top of this skid. These kegs are fed by two speed-controlled pumps / mixers. the whole is mounted in and on a stainless steel frame. This frame is in a pla ...

Face driver, face driver, face driver, driver tip, face driver, face driver -Manufacturer: WMW ABW, face driver -Type: MS5 -Forehead dimension: Ø 65 mm -Quantity: 9x centering tips available -Price per piece -Recording: see photos -Dimensions total: Ø 74 x 220 mm -Weight: 2.9 kg/pc.

Face driver, face driver, face driver, driver tip, face driver, face driver -Manufacturer: ABW, face driver -Type: MS6 -Forehead dimension: Ø 90 mm -Recording: see photos -Dimensions total: Ø 110 x 315 mm -Weight: 8.5 kg

Face driver, face driver, face driver, driver tip, face driver, face driver -Manufacturer: WMW ABW, face driver -Type: MS5 -Forehead dimension: Ø 63 mm -Recording: see photos -Dimensions total: Ø 80 x 235 mm -Weight: 3.5 kg

First machine, for longitudinal processing, TECNOLEGNO COMPACT 48/2, built in 1998 Working width min/max 90/300 mm. Single chain track Equipment: 1+1 Milling motor universally tiltable with pneumatically controlled pressure shoe 1+1 Milling motor universally tiltable with pneumatically controlled pressure shoe 1+1 Milling motor universally tiltable with pneumatically controlled pressure shoe 1+1 Milling motor universally tiltable with pneumatically controlled pressure shoe Second machine for crosswise processing, MANEA MST-70, built in 1991 Working width min/max 220 / 2500 mm. Infeed chain with dogs hopper feed Equipment: 1+1 Milling motor universally tiltable with pneumatically controlled pressure shoe 1+1 Milling motor universally tiltable with pneumatically controlled pressure shoe 1+1 Milling motor universally tiltable with pneumatically controlled pressure shoe 1+1 Milling motor un ...

Fritsch MSG-0700-2 Flour duster 2012, stainless flour duster, mounted on stainless frame, duster width 620mm, variable speed, mobile, 1Ph

Description: SPECIFICATIONS Character: Sacem Type: MSPC 110 Year of construction: 1976 X: 2,500 mm Y: 2,000 mm Z: 500 mm B: 1,250 mm Top name spindle: ISO 50 Spindle: ø110 mm Digital readout: SONY Panel length: 2x 3,000 mm Panel width: 2x 1,500 mm Flat turning support: 400 mm slag (including various tools) Lunettes included 2x Spindle support 1x Angled freewheel (Huron type ISO 50) Mantle freewheel: 320 + ø400 mm Angle plate: (2x) 500 x 1,330 mm / (2x) 650 x 1,700 mm / (2x) 800 x 2,800 mm Approx. Onsite Dimension. (l x w x h): 8,000 x 3,700 x 5,000 mm, weight approx.: 25,000 kg

Metal detector for conveyor belt, all metal detector, tunnel metal detector, metal detector -Manufacturer: SS Temafa, metal detector all-metal search system -Metal detector: SS TFX 4000/440 -Detector opening: Ø 440 x 530 mm -Control: Temafa MSG 4-FF -Individual components: see photos -Transport dimensions: 750/530/H790 mm -Weight: 96kg

LINDNER MICROMAT MS2000, rotor length 2.025 mm., n.104 knives, knives size 43x43x23 mm., screen size 50 mm., V-belt 75 kw drive 400V 3Ph.50 Hz 1500 rpm, rotor speed 80 rpm, hydraulic ram, constructed in 1997, offered RECONDITIONED, installed power : 75