vertical boring used for sale

Manufacturer: HYUNDAI KIA Model: VX 500 Year: 2007 Condition: Used Stock number: 9495 Control System: FANUC Series 21i-MB Work table length: 1200 mm Work table width: 500 mm Spindle drive power: 11 kW Maximum vertical spindle speed: 8000 1/min X-axis travel: 1090 mm Y-axis travel: 510 mm Z-axis travel: 635 mm Machine weight: 7000 kg

Manufacturer: AWEA Model No.: A+1600 Year: 2011 Condition: Used Stock No: 9497 Control System: FANUC Series 18i-MB Switch-on hours: 1727 h Operating hours: 374 h Work table length: 1700 mm Work table width: 800 mm Maximum table load (uniform): 2000 kg Spindle drive power: 20 kW Maximum vertical spindle speed: 6000 1/min X-axis travel: 1600 mm Y-axis travel: 800 mm Z-axis travel: 800 mm Cone: BT 50 Number of all tools: 24 pieces Machine weight: 15000 kg

Manufacturer: Pinnacle Model: VMC 2000S Year: 2015 Condition: Used Stock number: 9499 Control system: HEIDENHAIN Work table length: 2200 mm Work table width: 850 mm Maximum vertical spindle speed: 8000 1/min X-axis travel: 2000 mm Y-axis travel: 900 mm Travel Z axis: 850 mm Machine weight: 16000 kg

X-axis: 525mm, Y-axis: 400mm, Z-axis: 450mm, Y-axis at electrode change and loading position: 675mm, internal dimensions of working tank: 750x650x420mm, max. dielectric level: 375mm, max. head load: 100kg, distance from tool carrier plate to worktable: 135-585mm, integrated C-axis speed, adjustable: 1-20rpm, measuring resolution: 0.001°, load capacity with manual electrode change: 50kg, load capacity with automatic electrode change: 15kg, support surface: 730x630mm, worktable load capacity: 1,000kg, connected load: 7kVA, fuse protection: 25A, length: 2900mm, width: 2200mm, height: 2653mm, machine weight: 4.4t, generator weight: 200kg, with documentation, C-axis, EW20 electrode changer, TAE M10 cooling unit, CO2 fire extinguishing system, 4µm filter system, locators, MultiProg software, an on-site inspection is possible.

The machine is in good technical condition; testing is possible by prior arrangement. TNC530, HSK63, 12,000 rpm, 28-position tool magazine, 40-bar through-spindle coolant (IKZ), laser tool breakage detection.

The machine is in good technical condition; testing is possible by prior arrangement. X-axis travel: 850 mm; Y-axis travel: 700 mm; Z-axis travel: 500 mm. Table dimensions (LxW): 10; load capacity: 2000 kg. Rapid traverse (XYZ/BC): 35 m/min. Spindle head: HSK-A63; speed: 0–18,000 rpm; spindle motor power: 20 kW. Tool positions: 38. Control system: Heidenhain TNC 640. Air through spindle. Heidenhain TS460 touch probe. Electronic handwheel. Approx. 20 HSK-A63 tool holders (in the changer). Manual cabin roof. Preparation for mist extraction system. Wash-down gun. Original HERMLE + Heidenhain documentation.

GeneralPrecision centre - Linear drive package - Active cooling for spindle, linear drives and electrical cabinet - Frame temperatur control - Direct measuring system - Chiptray, coolant/airblast changing - Full cabin including 2nd door; Control: 3D-Control Heidenhain TNC 640 Technical DataFeed rate longitudinal/transverse/vertical1-80000/1-80000/1-80000 mm/minSpindle taperHSK-A 63 Rapid traverse longitudinal/transverse/vertical80/80/80 m/minWorking area 1Longitudinal650 mmCross600 mmVertical450 mmTool changerType of magazineChain Number of tools30 Type of gripperDouble gripper Floor space/WeightDimensions (L x W x H)2,92 x 2,42 x 2,88 (3,0) mWeight approx.9600 KgHSC70 5-Axis SpecificationHSC70 with 5-Axis specification clamping area Ø 600 mm // Ø 23.61 inch swivel range B-axis +20/-110°; C-axis 360° table load max. 500 kg // 1102.31 lbs absolute measuring systems incl. permanent co ...

The machine is in good technical condition; testing is possible by prior arrangement. + Accessories: Chip auger, programmable coolant nozzle, power failure detection module, remote jog handle with color LCD, rigid tapping, 15,000 rpm spindle (ISO 40 taper), 30 hp (22.4 kW) vector drive, inline direct drive, intuitive Renishaw wireless probe system, 2x machine vise, 30x tool holder.

Key data: 762 mm, 406 mm, 508 mm

Manufacturer: HAAS Model No.: VF-2DHE Year: 2005 Condition: Used Stock number: 9515 Maximum vertical spindle speed: 7500 1/min X-axis travel: 762 mm Y-axis travel: 406 mm Travel Z-axis: 508 mm Number of stacking positions: 20 pieces Machine weight: 3500 kg

DMG Gildemeister CTV 160Year of manuf. : 2016 Control : Siemens Sinumerik ____________Description:General:Year of construction:2016Control:Siemens SinumerikChuck diameter:170 mmSwing diameter:240 mmTravel X/Z:720 / 300 mmSpindle:Speed:6,000 rpmChuck:3-jaw chuck SMW Autoblok KNCS-N 170-43Tool carrier:Technology:Turret, 12 stationsTool holder:VDI 40Driven tool holders:YesAutomation:Technology:Integrated workpiece storageFeatures / Accessories:Chip disposal:Chip conveyorCoolant filtration:KNOLL band filter system (type 240 S-1)Fire protection:Kraft & Bauer argon extinguishing system

Gainsborough GV2K108 VFFS bagger with auger filler Serial: GV101450 2010, Vertical form fill seal bagging machine with top mounted Augapac vectofill S4 auger filler, smart date X40 coder, HMI touch screen controls, up to 70 bags per minute, 250mm jaw width, comes with box of spare jaws, screws, belts, forming shoulders, also comes with Volkmann VS2000 vacuum conveyor which was previously used to vacuum powder into the hopper, with manual, 3Ph

The machine is in good technical condition; testing is possible by prior arrangement. + Accessories: Chip auger, programmable coolant nozzle, power failure detection module, remote jog handle with color LCD, rigid tapping, 15,000 rpm spindle (ISO 40 taper), 30 hp (22.4 kW) vector drive, inline direct drive, intuitive Renishaw wireless probe system, 2x machine vise, 30x tool holder.

The machine is in good technical condition and available for testing by prior arrangement. It features a FANUC i control system, cast-iron construction, linear guideways, X/Y/Z axis travels of 1270/670/625 mm, a 1300 x 670 mm table with T-slots, a table load capacity of 1000 kg, and a 30-position tool changer. Extensive accessories included: 4th axis (rotary table), hydraulic vise, RENISHAW tool and workpiece probes, oil skimmer, 3-color signal light, belt-type chip conveyor, Filtermist 6002 mist collector, tool holders, etc.

The machine is in good technical condition and can be tested by prior arrangement. It is fully functional. It is equipped with a new tool magazine but comes without a workpiece probe, clamping fixtures, or tools.

vertical machining center, year 2007, CNC S4045FD. Used machine. More info & price on IndustrialBuyer.

Behringer LPS 40-4 - Vertical Metal Band Saw - Hydraulic belt tensioning - Servo-controlled feed - Solid C-frame - Year of construction 2014 Technical data - Working area (LxWxH): 4000 x 680 x 400 mm - Smallest section height: 10 mm - Minimum section width: 15 mm - Inner table support surface: approx. 680 x 4000 mm - Indoor table max. load: 7500 kg - Outdoor table support surface: approx. 680 x 4000 mm - Outdoor table max. load: 9500 kg - Material support height: approx. 1385 mm - Cutting speed: 17 - 120 m/min - Saw blade dimensions: 5400 x 54 x 1.6 mm - System or belt tensioning pressure: 85 bar - Quantity of cooling lubricant: approx. 250 l - Motor power - saw drive: 5.5 kW - Motor power - hydraulic pump: 2.2 kW - Motor power - chip conveyor: approx. 0.26 kW - Connected load: approx. 11 kW - Voltage: 400 V, 50 Hz - Control voltage / hydraulic valve voltage: ...

- Total installed power: 60 KW. - Production capacity: 555 untapped moulds / 485 mapped moulds. - Maximum cool-down time: 48 min. - Maximum sand consumption: 110 Tons/h. - Weight of the pieces: from 0.50 kg to 20 kg. - A cooling line consisting of a DISA SBC-2306 belt conveyor with an approximate length of 52000 mm is included. - Operating conditions of this machine: unchecked. - EX WORKS sale. Disassembly, disconnection, loading and removal at the expense of the buyer, who must comply with current regulations on occupational risk prevention, health and safety in industrial work, providing the necessary documentation, insurance and accreditations. Auction-ID: A7-50548-2

Behringer LPS 60-T - Vertical Metal Band Saw - Servo feed with cutting pressure control - Robust cast iron belt guide - Quick saw blade change - Saw drive operating hours: 32441 h - Year of construction 2017 Technical data - Working area LxWxH: 1260 x 720 x 600 mm - Smallest material height: 10 mm - Smallest section width: 5 mm - Inner table support surface: approx. 1260 x 680 mm - Indoor table max. load: 3000 kg - Outdoor table support surface: approx. 1260 x 680 mm - Outdoor table max. load: 3000 kg - Material support height approx.: 1050mm (incl. bottom tray) - Cutting speed: 10 - 110 m/min - Saw blade dimensions: 5400 x 54 x 1.6 mm - System or belt tensioning pressure: 85 bar - Quantity of cooling lubricant: approx. 100 l - Motor power - Saw drive: 5.5 kW - Motor power' hydraulic pump: 2.2 kW - Engine power - Coolant pump: 0.15 kW - Motor power - chip conv ...

Key data: 1000 mm, 800 mm, 500 mm

Technical Specifications • CNC Control Unit: DIALOG 112 • Axis Travels (X, Y, Z): • X-axis: 1000 mm • Y-axis: 800 mm • Z-axis: 500 mm • Work Table: • Table dimensions: 1250 x 800 mm • Maximum table load: 1200 kg • Spindle: • Tool taper: SK 40 / HSK-A63 (depending on configuration) • Maximum spindle speed: 15,000 rpm (up to 18,000 rpm for hi-dyn versions) • Spindle drive power: approx. 10 / 15 kW • Tool Changer (ATC): • Magazine capacity: 30 positions (some variations have 60) • Max. tool weight: 12 kg

x-axis: 2200 mm y-axis: 1700 mm z-axis: 750 mm total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m CNC control: WinMax Travel ranges: X/Y/Z: 2200 x 1700 x 750 mm Spindle speed: 12,000 rpm Tool holder: SK 40 Big Plus Drive power: 18/26 kW Tool changer: 40-station Table clamping surface: 2100 x 1600 mm Distance from spindle nose to table: 150 – 900 mm Equipment/Accessories: Workpiece positioning detection and tool length calibration via probe Direct measuring system (X/Y/Z axes) Production package for high-performance chip removal Internal coolant supply (ICS) 20 bar Chip conveyor Coolant system (1050 liters) with belt filter unit Coolant spray gun Chip splash guard enclosure Machine status signal light LED machine light Set of machine leveling pads Parts list and circuit diagrams on CD Programming and maintenance manuals via control help function  ...

: 0760 mm : 430 mm : 460 mm : 900x410 mm : SK 40 : 8.000 U/min The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Manufacturer: MAZAK Model No.: Variaxis i-800 NEO Year 2023 Condition Used Stock number 9210 Mazatrol Smooth Ai control system Work table length 800 mm Work table width 630 mm Maximum table load (uniform) 1000 kg Maximum vertical spindle speed 18000 1/min X-axis travel 750 mm Y-axis travels 890 mm Travel Z axis 600 mm Taper HSK A100 Number of axles 5 pieces Number of Stacking Positions 80 Pieces Machine height 3497 mm Machine length 2695 mm Machine width 4890 mm Machine weight 18080 kg Equipment: Chip conveyor Handwheel Blowing air on the workpiece Air cooling through the spindle Workpiece rinsing Oil Mist Separator (Gx1000) Smooth Cam AI M Renishaw RMP600 Workpiece Probe High pressure unit (70 bar) Camera in the machine working room Coolant coolers Renishaw PRIMO LTS Tool Probe

Key data: 500 mm, 420 mm, 380 mm

CNC Vertical Machining Center DECKEL MAHO DMU 50 eVolution With track control Heidenhain iTNC 530 Year of Make: 2004 Travel: X 500 Y 420 Z 380 Speed range: 0 – 18000 rpm infinitely variable ( SK 40 ) With the following accessories: 2-Axis NC Swivel Rotary Table 500mm x 380mm Vertical tool changer with 32 magazine positions Full protection cabin with sliding doors and interior lighting Electronic handwheel Operating mode 3 + 4 3 D Probe Coolant Setup 4 Height Adjustable Machine Shoes Operating Instructions

The machine is in good technical condition; it can be tested by prior arrangement.

vertical machining center, year 2007. Used machine. More info & price on IndustrialBuyer.

roll diameter: 320 mm throat: 310 mm workpiece height: 230 mm table-size: 505 x 505 mm cutting speed: 12 - 375 m/min turning speeds: 39 - 1230 U/min saw band length: 2460 - 2620 mm voltage: 400 V total power requirement: 1,3 kW weight of the machine ca.: 420 kg dimensions of the machine ca.: 0,80 x 0,80 x 1,65 m welding equipment: IDEAL air blow equipment: - Serial-No.: 22600-77/14 - with stepless feed - welding equipment IDEAL - grinding wheel - machine lamp The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

VDL UVA Lima 250 High speed VFFS Serial: 2016542 2016, Stainless, high speed continuous motion vertical form seal bagging machine, jaw width 320mm, up to 200 bags per minute, Allen Bradley HMI touch panel, with Becker vac pump and Markem Smartdate X40, comes with four different sets of forming shoulders a trolley of additional parts and a flighted elevator outfeed conveyor, 3Ph

Key data: 850 mm, 520 mm, 475 mm

CNC Vertical Machining Center DECKEL MAHO DMC 850 V With track control Heidenhain TNC 640 Year of Make: 2016 Travel: X 850 Y 520 Z 475 Speed range: 0 – 20,000 rpm infinitely variable With the following accessories: Rigid angle table 1160 mm x 575 mm clamping surface Vertical tool changer with 30 magazine positions ( HSK 63 ) 3 D Probe Heidenhain TS 649 Electronic handwheel LED light strip Polycarbonate Safety Lenses Full protection cabin with sliding doors and interior lighting Operating mode 3 + 4 Sealing air for linear measuring systems Spindle Oil Cooler Chip conveyor Chip flushing Swarf Spray Gun Coolant device (reinforced coolant pump) 4 Height Adjustable Machine Shoes Operating Instructions

Description Item # 9398 - BAGGING MACHINE (vertical form fill seal) Manufactured by TNA Model Robag 3C Make & Type : R3C-320TX-RSJ-1S Year 2012 230/380/415/460Volts, 3Phase, 50/60Hz Rotary Single Jaw Single Servo Up to 320mms wide bags, minimum 40mms 50 to 1000mms bag lengths Running on 100mm x 100mm, 25gr bags Around 100ppm on this bag size

Vertical packaging machine (VFFS) with servo drives and Videojet printer, This Wolf VPC 250 is a vertical form-fill-seal machine built in 2019 by Wolf Verpackungsmaschinen. It forms bags from reel-fed film, fills and seals them, and can be combined with multihead weighers, linear weighers, auger fillers and other dosing systems. According to the specifications for the VPC 250 series, it makes bags of approx. 50 to 250 mm wide and 80 to 450 mm long, from film up to approx. 600 mm wide, with a fill volume of up to approx. 6 litres. What is achievable depends on the installed forming set, the product and the film., The machine has a Siemens SIMATIC touchscreen with PackML control, SEW drives and servo-controlled functions, dual vacuum-assisted film pull belts, a photocell for printed film and an integrated knife. The front and rear cross seals and the vertical seal each have their own tempe ...

Key data: 635 mm, 510 mm, 460 mm

Vertical machining center Manufacturer: DMG Gildemeister Type: DMC 635 v eco Engine No.: 1537000170A Year of Make: 2009 Control: Siemens 810D Shopmill Axles: 3 Travels X: 635 mm Y: 510 mm Z: 460 mm Tool changer: 20 places SK 40 Speed: 20-8,000 rpm Drive power: 13/9 kW (40/100%ED) - Direct displacement measurement system X,Y,Z - Sealing air for measuring systems - Coolant blowing air switching - Table size 560x790 mm - Electronic handwheel Errors and prior sale excepted.

The machine is in good technical condition; it can be tested by prior arrangement.

Compact VFFS machine that forms, fills and seals bags, This Audion turns a reel of film into pillow bags: the film is formed around the filling tube, sealed along the seam and closed at the bottom, after which the product drops into the bag from above. Suitable for dry, free-flowing products such as pasta, snacks or cut vegetables, fed by a weigher or doser., It is built compactly on a stainless frame with castors and has a touchscreen with adjustable seal temperatures. We did not find a rating plate with the model or year., Located in Emmeloord, the Netherlands. Immediately available, price on request., More photos and full specifications: stcfoodsolutions.nl/en/machine/audion-vertical-form-fill-seal-machine/ , Type: Vertical form fill seal machine (VFFS), Bag style: Pillow bag, Film transport: Two pull belts along the filling tube, Controls: Touchscreen, adjustable seal temperatures, C ...

Offered for sale is a vertical form-fill-seal machine with dosing and filling unit. Control system: HASSIA REDATRON machine control system without LCD display, membrane keypad, recipe memory, parameter management and emergency stop switch. Equipped with stainless steel product container, conical dosing hopper, pneumatically operated dosing unit, film roll holder, film guide, forming collar, vertical film forming, sealing unit and transparent protective enclosure. Inspection possible by arrangement.

x-travel: 1100 mm y-travel: 600 mm z-travel: 510 mm Table dimensions: 1300 x 600 mm table load: 1,0 t tool taper: ISO 40 DIN 69871A spindle turning speed range: 60 - 12000 U/min rapid traverse: 32 m/min power capacity: 10 / 17 kW no. of tools in the magazine: 32 Stück tool length - max.: 300 mm Tool diameter: 76 / 127 mm weight of tools max.: 8 kg tool changing time: 2,5 sec total power requirement: 30 kW weight of the machine ca.: 8,5 t dimensions of the machine ca.: 4400 x 2250 x 2920 mm Infrared measuring device: Machine with only 3.311 spindle running hours ! Heidenhain iTNC 530 CNC control 32-station ATC Internal coolant system: 20 bar Coolant tank: 480 l Chip conveyor Heidenhain glass scales in X/Y/Z Oil-cooler Infrared measuring device The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

x-travel: 762 mm y-travel: 460 mm z-travel: 460 mm table surface area: 1.000 x 460 mm control: Okuma OSP 20 M rapid traverse: 40/40/32 m/min table load: 0,7 t turning speed range: 12000 U/min power capacity - milling spindle: 22/18,5 kW max. torque on the spindle: 198 Nm no. of tools in the magazine: 32 Stück internal coolant system feed: 20/43 bar tool taper: BT 40 weight of the machine ca.: 6,8 t dimensions: 2.22 x 2,9 x 2,75 m CNC- vertical machining centre with internal coolant First installation 2014 - coolant through the spindel 15 bar, 20 ltr/min - air throug the spindle - chip conveyor - signal lamp - Dual tool change arm - external electric hand weel - tool lenght measuring and toolbreak detection - filter system - X- axis in gantry style - spindle oil cooler - thermal compensation spindel and bed - USB and Ethernet port - Hi-Cut Pro high speed control - 100 Zero offsets - thre ...

Key data: 406 mm, 305 mm, 254 mm

CNC Vertical - Machining Center HAAS MINIMILL With path control HAAS Year of Make: 2006 Travels: X 406 Y 305 Z 254 Speed range: 30 – 6,000 rpm infinitely variable ( SK 40 ) With the following accessories: Rigid angle table 730 mm x 300 mm clamping surface Vertical tool changer with 10 magazine positions ( SK 40 ) Full protection cabin with sliding doors and interior lighting Electronic handwheel 3 D Pushbutton Renishaw OMP 40 ( 2021 installed ) Tool breakage detection Renishaw TS 27 R ( installed in 2021 ) NC Branch HAAS BJ. 2021 Coolant Setup 4 pcs machine shoes Operating Instructions

Key data: 1400 mm, 700 mm, 700 mm

Manufacturer: Victor Model No.: Vcenter-140 Year: 2001 Condition: Used Stock number: 9605 Control system: HEIDENHAIN TNC 430 Work table length: 1650 mm Work table width: 650 mm X-axis travel: 1400 mm Y-axis travel: 700 mm Travel Z axis: 700 mm

Key data: 1040 mm, 600 mm, 500 mm

CNC Vertical Machining Center DECKEL MAHO DMC 104 V linear With track control Heidenhain iTNC 530 Year of Make: 2005 Travel: X 1040 Y 600 Z 500 Speed range: 0 – 12,000 rpm infinitely variable With the following accessories: Rigid angle table 850 mm x 600 mm clamping surface Vertical tool changer with 30 magazine positions ( SK 40 ) NC Dividing head with tailstock Electronic handwheel Full protection cabin with sliding doors and interior lighting Operating mode 3 + 4 IKZ 40 bar Chip conveyor Rotoclear Swarf Spray Gun Spiral chip auger Coolant Setup 3 Height Adjustable Machine Shoes Operating instructions

Used Rafailidis vertical router (spindle router / milling machine) for woodworking. • Brand: Rafailidis. • Vertical router used for routing, profiling, grooving and shaping of wooden parts in joinery and furniture production. • Condition: has not been in operation for several years; inspection and testing are required before use. • Model and technical details such as table size, spindle data, motor power and supply voltage are not recorded; please contact us. Auction-ID: A7-50988-136

With double pallet, HEIDENHAIN control Excluding machining and tooling supports AVAILABILITY END OF JANUARY/BEGINNING OF FEBRUARY 2027 Auction-ID: A7-51034-15

Fast tool change, FANUC Series Oi-MC control Excluding machining supports, magnetic tables and tools AVAILABILITY NOVEMBER 2026 Auction-ID: A7-51034-17

With double pallet, FANUC Series 18i-MB control Excluding machining and tooling supports AVAILABILITY END OF JANUARY/BEGINNING OF FEBRUARY 2027 Auction-ID: A7-51034-10

MITSUBISHI Control Excluding machining and tooling supports COLLECTION BY SEPTEMBER 2026 Auction-ID: A7-51034-11

MITSUBISHI Control Excluding machining and tooling supports and above-machine air filter AVAILABILITY END OF OCTOBER 2026 Auction-ID: A7-51034-12

This 3-axis Alzmetall GS 800/3 vertical machining centre was manufactured in 2008. It features an impressive X-axis travel of 800 mm, Y-axis travel of 800 mm, and Z-axis travel of 500 mm. The machine is equipped with a HEIDENHAIN iTNC 530 control and a robust table surface area of 920 x 900 mm, supporting a maximum table load of 1,800 kg. If you are looking to get high-quality machining capabilities, consider the Alzmetall GS 800/3 machine we have for sale. Contact us for further details.

CONTROLS   CNC controls SIEMENS 840 D WORKING RANGE (DOUBLE DISC GRINDER)   Grinding wheel diameter: 750 mm   grinding width max. - throughfeed grinding: 180 mm   material thickness max. - throughfeed grindin: 30 mm   grinding width max. - plunge cut grinding: 300 mm   material thickness - plunge cut grinding: 80 mm GRINDING SPINDLE 1   drive power: 48 kW GRINDING SPINDLE 2   drive power: 48 kW COMPONENT-FEEDER   Feeder Design: rotary Feeder   feeder velocity max.: 20 mm/min   feeder velocity min.: 240 mm/min DIMENSIONS / WEIGHTS   space requirements -left/right-: 4900 mm   space requirements -front/back-: 5000 mm   total height: 3100 mm   total weight approx.: 13000 kg with inline measuring system DISKUS IONIC 17A Emulsion treatment system HÜTTNER F6-157, YOM 2006

vertical machining center, year 2001, CNC 18i MA. Used machine. More info & price on IndustrialBuyer.

USED AKIRA SEIKI PERFORMA V2.5XP MACHINING CENTER Year: 2011 Table dimensions: 910 x 400 mm Weight allowed on the table: 960 Kg Spindle power: 15 kW Spindle speed: 12,000 rpm Axis travel: X=760 - Y=445 - Z=520 mm Cone type: BT 40 Tool changer: 28 tools Equipped with 1 MITSUBISHI M70 CNC 1 Center coolant 1 Chip conveyor Auction-ID: A1-50950-1

x-travel: 1016 mm y-travel: 610 mm z-travel: 760 mm Control: Heidenhain iTNC 530 total power requirement: kW weight of the machine ca.: 9,4 t dimensions of the machine ca.: m Heidenhain iTNC 530 CNC control Travel ranges: X-axis 1.016 mm Y-axis 610 mm Z-axis 760 mm Spindle speed 10.000 rpm Tool holder HSK 80 Power 12 kW Table clamping surface 1.250 x 590 mm Table load 900 kg Feed rate 40.000 mm/min. Machine weight 9.400 kg Equipment: Heidenhain iTNC 530 CNC contouring control Electronic handwheel 3D touch probe tool changer 2-position pallet table Coolant system with internal coolant supply (ICS) Chip conveyor Oil mist extraction system The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.