136,096 used machines on RESALE, but how to find them? Machine Search
Year of construction: 2019 CNC controller: FS-31iB (MAPPS IVB) Axes X-axis travel mm: 1540 Y-axis travel mm: 760 Z-axis travel mm: 660 Rapid traverse m/min: 20 Worktable Table dimensions mm: 1700x760 Max. workpiece weight kg: 2000 Spindle Spindle speed rpm: 20000 Spindle drive power kW: 18,5/15/11 (10 min./30 min./cont) Spindle torque Nm: 81 (10%ED) Cooling Cooling through the Spindle Center bar: 70 Tool system Tool holder: BT 40 Tool magazine slots: 60 With free neighboring places mm: 125 With occupied neighboring places mm: 95 Max. Tool Length mm: 450 Max tool weight kg: 12 Tool-to-tool time s: 2.1 Equipment Electronic Handwheel Internal cooling lubricant supply Rinsing gun Signal lamp Tool measuring arm Mist collector Heat compensator Program restart Paper band filter Machine running times Under power: 35557 Spindle Working: 27278 Rated power kVA: ...
Key data: 550 mm, 550 mm, 510 mm
CNC Vertical Machining Center "DECKEL MAHO M 1" With rail control Siemens 828 D Shop Mill Year of construction: 2022 Commissioning: 9/2023 Travel: X 550 Y 550 Z 510 Speed range: 20 – 12,000 rpm infinitely variable With the following accessories: Rigid angle table 850 mm x 650 mm clamping surface Vertical tool changer with 24 magazine positions ( SK 40 ) IKZ 20 bar Electronic handwheel 3 D Probe Renishaw PP 40 Tool Length Measurement Renishaw TS27R Full protection cabin with sliding doors and interior lighting Coolant Setup Chip conveyor Oil mist extraction Coolant spray gun 3 Height Adjustable Machine Shoes Operating Instructions THE MACHINE IS IN TOP CONDITION!
The machine is in good technical condition; testing is possible by prior arrangement. + Accessories: Chip auger, programmable coolant nozzle, power failure detection module, remote jog handle with color LCD, rigid tapping, 15,000 rpm spindle (ISO 40 taper), 30 hp (22.4 kW) vector drive, inline direct drive, intuitive Renishaw wireless probe system, 2x machine vise, 30x tool holder.
Incl. tool changer and the tool holders located inside, with chip conveyor and coolant system. Attention: The machine can be transported on a standard truck! Additional technical specifications: • Nominal current: 80 A • Table: with 9 slots • attached clamping plate, dimensions: 1200 x 810 mm • with three ALLMATIC machine vices, jaw widths: 160 mm
Incl. chip conveyor, incl. 3-D touch probe and incl. the tool holders located in the tool changer! Attention: without the machine vises seen in the photos! Attention: the machine can be transported on a standard truck!
Attention: The machine can be transported on a truck up to 3000 mm wide! Additional technical specifications: • table with 5 slots • with mounted plate, plate dimensions: 900 x 550 mm • incl. vise, jaw width: 125 mm
Attention: the machine can be transported on a truck up to 3000 mm width! Additional technical specifications: • Feed rate in X/Y/Z: 20 - 15,000 mm/min • Setup mode X/Y/Z: 20 - 2000 mm/min • with in total 32-station tool changer (2 x 16 places) • max. tool diameter when all slots in magazine 1 are occupied: 130 mm • max. tool diameter when all slots in magazine 2 are occupied: 80 mm • max. tool length from spindle nose: 315 mm • max. tool weight at automatic tool changing: 8 kg • max. total tool weight in magazine: 160 kg • T-slot spacing: 63 mm
Year of construction: 2011 CNC controller: Heidenhain iTNC 530 Axes X-axis travel mm: 500 Y-axis travel mm: 450 Z-axis travel mm: 400 C-axis degrees: 360º (0,001) B-axis degrees: 0º/108º (0,001) Rapid traverse m/min: 80/50/50 Milling/turning table nc: Table dimensions mm: Ø390 Maximum workpiece size (D x H) mm: Ø630x500 Max. workpiece weight kg: 200 Spindle Spindle speed rpm: 18000 Spindle drive power kW: 35/25 (40%ED/cont) Spindle torque Nm: 130/87 Tool system Tool holder: HSK-A 63 Tool magazine slots: 30 With free neighboring places mm: 130 With occupied neighboring places mm: 80 Max. Tool Length mm: 300 Chip-to-chip time s: 5 Equipment Chip conveyor Infrared probe Rinsing gun blowing air through spindle center selectable via M-function Signal lamp Laser tool measurement for measuring tool length and diameter Programmable coolant nozzles Heat compe ...
MIKRON UCP 600 ist ein Vertikal Bearbeitungszenter, ausgelegt für präzise Bearbeitung mit hoher Genauigkeit und Zuverlässigkeit. 5 Achsen für 5-Seiten-Bearbeitung; Rundtisch Ø400 mm; Verfahrwege X 600 mm, Y 450 mm, Z 450 mm; Tischbelastung 400 kg; B-Achse -115/+30°; C-Achse 360°. Werkzeugwechsler TC 30; Spindel stufenlos 50–20.000 t/min; Spindelmotor 5,5 kW; Gesamtbedarf 18 kW; Vorschub 22 mm/min; Eilgang 22 m/min; Anschluss 3x400 V 50 Hz; Gewicht ~6500 kg; Abmessungen 2500×1600×2650 mm; Schallpegel 75 dB(A). Ausstattung: Kühlmitteleinrichtung, elektronisches Handbedienpult, elektronisches Handrad. Erreicht enge Toleranzen; typische Branchen: Automotive, Luftfahrt, Medizintechnik, Uhrmacherei, Maschinenbau. Technische Daten ohne Gewähr
Year of construction: 2010 CNC controller: Heidenhain iTNC 530 Axes X-axis travel mm: 500 Y-axis travel mm: 450 Z-axis travel mm: 400 C-axis degrees: 360º (0,001) B-axis degrees: 0º/108º (0,001) Rapid traverse m/min: 80/50/50 Milling/turning table nc: Table dimensions mm: Ø390 Maximum workpiece size (D x H) mm: Ø630x500 Max. workpiece weight kg: 200 Spindle Spindle speed rpm: 18000 Spindle drive power kW: 35/25 (40%ED/cont) Spindle torque Nm: 130/87 Tool system Tool holder: HSK-A 63 Tool magazine slots: 30 With free neighboring places mm: 130 With occupied neighboring places mm: 80 Max. Tool Length mm: 300 Chip-to-chip time s: 5 Equipment Chip conveyor Infrared probe Rinsing gun blowing air through spindle center selectable via M-function Signal lamp Laser tool measurement for measuring tool length and diameter Programmable coolant nozzles Heat comp ...
Vertical sheet metal storage, drawer sorting storage for sheet metal, Hegla, 10 compartments for sheet metal 1.50m x 3m, – used - : Price from location: 4.500.-€ (net)! Manufacturer: Hegla Type: SCH-SL-3 Year of construction 03/2010 Maximum adjustment length 3,000 mm Maximum adjustment height 1,500 mm Number of compartments:10 compartments Load capacity 500kg per drawer (10 x 500kg) Max. loading height: 1,500mm Total dimensions LxWxH: 3,250mm x 1,590mm x 1,950 mm Condition: good Available: immediately Location: 87719 Mindelheim
Manufacturer KONDIA Model A-6 Year 2015 CNC HEIDENHAIN TNC 530 HSCI Table Table surface 800 x 400 mm. Number of T-Slots 3 T-slots (width, distance) 18.125 mm. Table-floor distance 885 mm. Table distance – spindle nose (min/max) 140 / 650 mm. Maximum weight allowed on table 450 kg. Routes and advances Longitudinal travel (X) 600 mm. Cross travel (Y) 410 mm. Vertical travel (Z) 500 mm. Fast forward X/Y/Z axes 30,000 mm./min. Head Spindle taper ISO 40 DIN 69871 Maximum spindle speed 12,000 rpm Spindle power 10 / 17 kW Autoloader Tools Chain Type Random Change Warehouse Positions 20 Maximum tool width with adjacent free positionsq 135 mm. Maximum tool width without adjacent free positionsq 85 mm. Maximum tool length 250 mm. Maximum tool weight 6 kg Equipment Internal cooling 20 BAR INCLUDED Chip evacuator INCLUDED Water gun cleaning parts INC ...
Key data: 800 mm, 500 mm, 540 mm
CNC Vertical Machining Center MIKRON VCE 800 W Pro With track control Heidenhain iTNC 530 Year of Make: 2004 Travel: X 800 Y 500 Z 540 Speed range: 30 – 10,000 rpm continuously variable ( SK 40 ) With the following accessories: Rigid angle table 910 mm x 500 mm clamping surface Vertical tool changer with 24 magazine positions ( SK 40 ) Full protection cabin with sliding doors and interior lighting Direct displacement measuring system (Heidenhain glass scales) Electronic handwheel Spindle cooling unit Chip rinsing gun Signal lamp Spiral Screw Conveyor Coolant Setup Operating Instructions
Robot Coupe R45 Vertical Cutter Mixer Stainless, 45L bowl capacity, three blade assembly, safety lid, variable speed, with timer, 3Ph
Robot Coupe R30 Vertical Cutter Mixer Stainless, 30L bowl capacity, three blade assembly, safety lid, variable speed, with timer, 3Ph
The machine is in good technical condition; testing is possible by prior arrangement. Spindle speed: 12,000 rpm. Travel ranges: Z 510 mm, Y 510 mm, X 835 mm. Feed rate: 30 m/min. Tool holder: SK 40. Tool magazine capacity: 30 stations. Table load capacity: 800 kg. Table dimensions: 1000 x 560 mm. Overall dimensions including chip removal system: approx. 4300 x 2500 mm (footprint). Machine weight: approx. 4450 kg. Coolant system with belt filter unit, 20 bar. Maintenance/repair history: -Tool changer adjustment: 11/2025 -Coolant rail: 11/2024 -Coaxial valve, power chain: 10/2024 -X-axis ball screw replacement, new motor belt, new lubrication dispenser: 10/2024 -HDD: 7/2023 -X-axis cover plate: 2/2023 -Rotary union: 4/2022 -Gripper set: 5/2022 -Spindle braking resistor: 5/2022 -Spindle refurbishment by Vopss: 10/2020
The machine is in good technical condition and available for testing by prior arrangement. It features a FANUC i control system, cast-iron construction, linear guideways, X/Y/Z axis travels of 1270/670/625 mm, a 1300 x 670 mm table with T-slots, a table load capacity of 1000 kg, and a 30-position tool changer. Extensive accessories included: 4th axis (rotary table), hydraulic vise, RENISHAW tool and workpiece probes, oil skimmer, 3-color signal light, belt-type chip conveyor, Filtermist 6002 mist collector, tool holders, etc.
The machine is in good technical condition and can be tested by prior arrangement. It is fully functional. It is equipped with a new tool magazine but comes without a workpiece probe, clamping fixtures, or tools.
X-axis: 525mm, Y-axis: 400mm, Z-axis: 450mm, Y-axis at electrode change and loading position: 675mm, internal dimensions of working tank: 750x650x420mm, max. dielectric level: 375mm, max. head load: 100kg, distance from tool carrier plate to worktable: 135-585mm, integrated C-axis speed, adjustable: 1-20rpm, measuring resolution: 0.001°, load capacity with manual electrode change: 50kg, load capacity with automatic electrode change: 15kg, support surface: 730x630mm, worktable load capacity: 1,000kg, connected load: 7kVA, fuse protection: 25A, length: 2900mm, width: 2200mm, height: 2653mm, machine weight: 4.4t, generator weight: 200kg, with documentation, C-axis, EW20 electrode changer, TAE M10 cooling unit, CO2 fire extinguishing system, 4µm filter system, locators, MultiProg software, an on-site inspection is possible.
- Total installed power: 60 KW. - Production capacity: 555 untapped moulds / 485 mapped moulds. - Maximum cool-down time: 48 min. - Maximum sand consumption: 110 Tons/h. - Weight of the pieces: from 0.50 kg to 20 kg. - A cooling line consisting of a DISA SBC-2306 belt conveyor with an approximate length of 52000 mm is included. - Operating conditions of this machine: unchecked. - EX WORKS sale. Disassembly, disconnection, loading and removal at the expense of the buyer, who must comply with current regulations on occupational risk prevention, health and safety in industrial work, providing the necessary documentation, insurance and accreditations. Auction-ID: A7-50548-2
DMG Gildemeister CTV 160Year of manuf. : 2016 Control : Siemens Sinumerik ____________Description:General:Year of construction:2016Control:Siemens SinumerikChuck diameter:170 mmSwing diameter:240 mmTravel X/Z:720 / 300 mmSpindle:Speed:6,000 rpmChuck:3-jaw chuck SMW Autoblok KNCS-N 170-43Tool carrier:Technology:Turret, 12 stationsTool holder:VDI 40Driven tool holders:YesAutomation:Technology:Integrated workpiece storageFeatures / Accessories:Chip disposal:Chip conveyorCoolant filtration:KNOLL band filter system (type 240 S-1)Fire protection:Kraft & Bauer argon extinguishing system
vertical machining center, year 2007, CNC S4045FD. Used machine. More info & price on IndustrialBuyer.
Key data: 1000 mm, 800 mm, 500 mm
Technical Specifications • CNC Control Unit: DIALOG 112 • Axis Travels (X, Y, Z): • X-axis: 1000 mm • Y-axis: 800 mm • Z-axis: 500 mm • Work Table: • Table dimensions: 1250 x 800 mm • Maximum table load: 1200 kg • Spindle: • Tool taper: SK 40 / HSK-A63 (depending on configuration) • Maximum spindle speed: 15,000 rpm (up to 18,000 rpm for hi-dyn versions) • Spindle drive power: approx. 10 / 15 kW • Tool Changer (ATC): • Magazine capacity: 30 positions (some variations have 60) • Max. tool weight: 12 kg
Behringer LPS 40-4 - Vertical Metal Band Saw - Hydraulic belt tensioning - Servo-controlled feed - Solid C-frame - Year of construction 2014 Technical data - Working area (LxWxH): 4000 x 680 x 400 mm - Smallest section height: 10 mm - Minimum section width: 15 mm - Inner table support surface: approx. 680 x 4000 mm - Indoor table max. load: 7500 kg - Outdoor table support surface: approx. 680 x 4000 mm - Outdoor table max. load: 9500 kg - Material support height: approx. 1385 mm - Cutting speed: 17 - 120 m/min - Saw blade dimensions: 5400 x 54 x 1.6 mm - System or belt tensioning pressure: 85 bar - Quantity of cooling lubricant: approx. 250 l - Motor power - saw drive: 5.5 kW - Motor power - hydraulic pump: 2.2 kW - Motor power - chip conveyor: approx. 0.26 kW - Connected load: approx. 11 kW - Voltage: 400 V, 50 Hz - Control voltage / hydraulic valve voltage: ...
Behringer LPS 60-T - Vertical Metal Band Saw - Servo feed with cutting pressure control - Robust cast iron belt guide - Quick saw blade change - Saw drive operating hours: 32441 h - Year of construction 2017 Technical data - Working area LxWxH: 1260 x 720 x 600 mm - Smallest material height: 10 mm - Smallest section width: 5 mm - Inner table support surface: approx. 1260 x 680 mm - Indoor table max. load: 3000 kg - Outdoor table support surface: approx. 1260 x 680 mm - Outdoor table max. load: 3000 kg - Material support height approx.: 1050mm (incl. bottom tray) - Cutting speed: 10 - 110 m/min - Saw blade dimensions: 5400 x 54 x 1.6 mm - System or belt tensioning pressure: 85 bar - Quantity of cooling lubricant: approx. 100 l - Motor power - Saw drive: 5.5 kW - Motor power' hydraulic pump: 2.2 kW - Engine power - Coolant pump: 0.15 kW - Motor power - chip conv ...
x-axis: 2200 mm y-axis: 1700 mm z-axis: 750 mm total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m CNC control: WinMax Travel ranges: X/Y/Z: 2200 x 1700 x 750 mm Spindle speed: 12,000 rpm Tool holder: SK 40 Big Plus Drive power: 18/26 kW Tool changer: 40-station Table clamping surface: 2100 x 1600 mm Distance from spindle nose to table: 150 – 900 mm Equipment/Accessories: Workpiece positioning detection and tool length calibration via probe Direct measuring system (X/Y/Z axes) Production package for high-performance chip removal Internal coolant supply (ICS) 20 bar Chip conveyor Coolant system (1050 liters) with belt filter unit Coolant spray gun Chip splash guard enclosure Machine status signal light LED machine light Set of machine leveling pads Parts list and circuit diagrams on CD Programming and maintenance manuals via control help function ...
: 0760 mm : 430 mm : 460 mm : 900x410 mm : SK 40 : 8.000 U/min The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Manufacturer: MAZAK Model No.: Variaxis i-800 NEO Year 2023 Condition Used Stock number 9210 Mazatrol Smooth Ai control system Work table length 800 mm Work table width 630 mm Maximum table load (uniform) 1000 kg Maximum vertical spindle speed 18000 1/min X-axis travel 750 mm Y-axis travels 890 mm Travel Z axis 600 mm Taper HSK A100 Number of axles 5 pieces Number of Stacking Positions 80 Pieces Machine height 3497 mm Machine length 2695 mm Machine width 4890 mm Machine weight 18080 kg Equipment: Chip conveyor Handwheel Blowing air on the workpiece Air cooling through the spindle Workpiece rinsing Oil Mist Separator (Gx1000) Smooth Cam AI M Renishaw RMP600 Workpiece Probe High pressure unit (70 bar) Camera in the machine working room Coolant coolers Renishaw PRIMO LTS Tool Probe
Key data: 500 mm, 420 mm, 380 mm
CNC Vertical Machining Center DECKEL MAHO DMU 50 eVolution With track control Heidenhain iTNC 530 Year of Make: 2004 Travel: X 500 Y 420 Z 380 Speed range: 0 – 18000 rpm infinitely variable ( SK 40 ) With the following accessories: 2-Axis NC Swivel Rotary Table 500mm x 380mm Vertical tool changer with 32 magazine positions Full protection cabin with sliding doors and interior lighting Electronic handwheel Operating mode 3 + 4 3 D Probe Coolant Setup 4 Height Adjustable Machine Shoes Operating Instructions
The machine is in good technical condition; it can be tested by prior arrangement.
vertical machining center, year 2007. Used machine. More info & price on IndustrialBuyer.
roll diameter: 320 mm throat: 310 mm workpiece height: 230 mm table-size: 505 x 505 mm cutting speed: 12 - 375 m/min turning speeds: 39 - 1230 U/min saw band length: 2460 - 2620 mm voltage: 400 V total power requirement: 1,3 kW weight of the machine ca.: 420 kg dimensions of the machine ca.: 0,80 x 0,80 x 1,65 m welding equipment: IDEAL air blow equipment: - Serial-No.: 22600-77/14 - with stepless feed - welding equipment IDEAL - grinding wheel - machine lamp The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
VDL UVA Lima 250 High speed VFFS Serial: 2016542 2016, Stainless, high speed continuous motion vertical form seal bagging machine, jaw width 320mm, up to 200 bags per minute, Allen Bradley HMI touch panel, with Becker vac pump and Markem Smartdate X40, comes with four different sets of forming shoulders a trolley of additional parts and a flighted elevator outfeed conveyor, 3Ph
Key data: 850 mm, 520 mm, 475 mm
CNC Vertical Machining Center DECKEL MAHO DMC 850 V With track control Heidenhain TNC 640 Year of Make: 2016 Travel: X 850 Y 520 Z 475 Speed range: 0 – 20,000 rpm infinitely variable With the following accessories: Rigid angle table 1160 mm x 575 mm clamping surface Vertical tool changer with 30 magazine positions ( HSK 63 ) 3 D Probe Heidenhain TS 649 Electronic handwheel LED light strip Polycarbonate Safety Lenses Full protection cabin with sliding doors and interior lighting Operating mode 3 + 4 Sealing air for linear measuring systems Spindle Oil Cooler Chip conveyor Chip flushing Swarf Spray Gun Coolant device (reinforced coolant pump) 4 Height Adjustable Machine Shoes Operating Instructions
Description Item # 9398 - BAGGING MACHINE (vertical form fill seal) Manufactured by TNA Model Robag 3C Make & Type : R3C-320TX-RSJ-1S Year 2012 230/380/415/460Volts, 3Phase, 50/60Hz Rotary Single Jaw Single Servo Up to 320mms wide bags, minimum 40mms 50 to 1000mms bag lengths Running on 100mm x 100mm, 25gr bags Around 100ppm on this bag size
Air receiver capacity: 200 lt, Air intake capacity: 400 lt/min, Motor power: 2,2 kW / 3 HP, Voltage: 400 VAC / 3 phases, Working pressure: 8 bar, Air compressor pump: B3700. Auction-ID: A1-50595-9
Vertical packaging machine (VFFS) with servo drives and Videojet printer, This Wolf VPC 250 is a vertical form-fill-seal machine built in 2019 by Wolf Verpackungsmaschinen. It forms bags from reel-fed film, fills and seals them, and can be combined with multihead weighers, linear weighers, auger fillers and other dosing systems. According to the specifications for the VPC 250 series, it makes bags of approx. 50 to 250 mm wide and 80 to 450 mm long, from film up to approx. 600 mm wide, with a fill volume of up to approx. 6 litres. What is achievable depends on the installed forming set, the product and the film., The machine has a Siemens SIMATIC touchscreen with PackML control, SEW drives and servo-controlled functions, dual vacuum-assisted film pull belts, a photocell for printed film and an integrated knife. The front and rear cross seals and the vertical seal each have their own tempe ...
Key data: 635 mm, 510 mm, 460 mm
Vertical machining center Manufacturer: DMG Gildemeister Type: DMC 635 v eco Engine No.: 1537000170A Year of Make: 2009 Control: Siemens 810D Shopmill Axles: 3 Travels X: 635 mm Y: 510 mm Z: 460 mm Tool changer: 20 places SK 40 Speed: 20-8,000 rpm Drive power: 13/9 kW (40/100%ED) - Direct displacement measurement system X,Y,Z - Sealing air for measuring systems - Coolant blowing air switching - Table size 560x790 mm - Electronic handwheel Errors and prior sale excepted.
The machine is in good technical condition; it can be tested by prior arrangement.
Compact VFFS machine that forms, fills and seals bags, This Audion turns a reel of film into pillow bags: the film is formed around the filling tube, sealed along the seam and closed at the bottom, after which the product drops into the bag from above. Suitable for dry, free-flowing products such as pasta, snacks or cut vegetables, fed by a weigher or doser., It is built compactly on a stainless frame with castors and has a touchscreen with adjustable seal temperatures. We did not find a rating plate with the model or year., Located in Emmeloord, the Netherlands. Immediately available, price on request., More photos and full specifications: stcfoodsolutions.nl/en/machine/audion-vertical-form-fill-seal-machine/ , Type: Vertical form fill seal machine (VFFS), Bag style: Pillow bag, Film transport: Two pull belts along the filling tube, Controls: Touchscreen, adjustable seal temperatures, C ...
Offered for sale is a vertical form-fill-seal machine with dosing and filling unit. Control system: HASSIA REDATRON machine control system without LCD display, membrane keypad, recipe memory, parameter management and emergency stop switch. Equipped with stainless steel product container, conical dosing hopper, pneumatically operated dosing unit, film roll holder, film guide, forming collar, vertical film forming, sealing unit and transparent protective enclosure. Inspection possible by arrangement.
x-travel: 1100 mm y-travel: 600 mm z-travel: 510 mm Table dimensions: 1300 x 600 mm table load: 1,0 t tool taper: ISO 40 DIN 69871A spindle turning speed range: 60 - 12000 U/min rapid traverse: 32 m/min power capacity: 10 / 17 kW no. of tools in the magazine: 32 Stück tool length - max.: 300 mm Tool diameter: 76 / 127 mm weight of tools max.: 8 kg tool changing time: 2,5 sec total power requirement: 30 kW weight of the machine ca.: 8,5 t dimensions of the machine ca.: 4400 x 2250 x 2920 mm Infrared measuring device: Machine with only 3.311 spindle running hours ! Heidenhain iTNC 530 CNC control 32-station ATC Internal coolant system: 20 bar Coolant tank: 480 l Chip conveyor Heidenhain glass scales in X/Y/Z Oil-cooler Infrared measuring device The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
x-travel: 762 mm y-travel: 460 mm z-travel: 460 mm table surface area: 1.000 x 460 mm control: Okuma OSP 20 M rapid traverse: 40/40/32 m/min table load: 0,7 t turning speed range: 12000 U/min power capacity - milling spindle: 22/18,5 kW max. torque on the spindle: 198 Nm no. of tools in the magazine: 32 Stück internal coolant system feed: 20/43 bar tool taper: BT 40 weight of the machine ca.: 6,8 t dimensions: 2.22 x 2,9 x 2,75 m CNC- vertical machining centre with internal coolant First installation 2014 - coolant through the spindel 15 bar, 20 ltr/min - air throug the spindle - chip conveyor - signal lamp - Dual tool change arm - external electric hand weel - tool lenght measuring and toolbreak detection - filter system - X- axis in gantry style - spindle oil cooler - thermal compensation spindel and bed - USB and Ethernet port - Hi-Cut Pro high speed control - 100 Zero offsets - thre ...
Calpeda 7.5 kW Stainless-Steel Vertical Multistage Industrial Pump Manufacturer: Calpeda Model: M132 V1-7.5T IE3 Equipment type: Vertical Multistage Centrifugal Pump Motor power: 7.5 kW Motor efficiency class: IE3 Location: 91701 Trnava Industrial vertical multistage centrifugal pump designed for water circulation, pressure boosting and process applications. Equipped with a stainless-steel multistage hydraulic section and high-efficiency Calpeda three-phase electric motor. Features / applications: Vertical multistage construction Stainless-steel hydraulic section 7.5 kW three-phase electric motor IE3 high-efficiency motor Industrial water circulation Pressure boosting Process water applications Condition: Used only a few times. Reported to have been working when last used. Current operational condition has not been independently verified. Sold as photographe ...
DRUKOV BRNO 2,000 L Pressure Vessel Manufacturer: DRUKOV BRNO Equipment type: Pressure Vessel Year: 2015 Serial number: 18616 Location: 91701 Trnava Industrial pressure vessel with a nominal volume of 2,000 litres. Manufactured in accordance with pressure equipment requirements and CE marked. Technical specifications: Volume: 2,000 L Maximum allowable pressure (PS): 16 bar Test pressure (PT): 23 bar Maximum allowable temperature (TS max.): 50°C Minimum allowable temperature (TS min.): 0°C Weight: 575 kg Fluid group: 2 Year of manufacture: 2015 CE marking: CE 1015 Condition: Used extensively over a long period. Reported to have been working when last used. Current operational condition and pressure certification status have not been verified. Auction-ID: A1-50694-118
Key data: 406 mm, 305 mm, 254 mm
CNC Vertical - Machining Center HAAS MINIMILL With path control HAAS Year of Make: 2006 Travels: X 406 Y 305 Z 254 Speed range: 30 – 6,000 rpm infinitely variable ( SK 40 ) With the following accessories: Rigid angle table 730 mm x 300 mm clamping surface Vertical tool changer with 10 magazine positions ( SK 40 ) Full protection cabin with sliding doors and interior lighting Electronic handwheel 3 D Pushbutton Renishaw OMP 40 ( 2021 installed ) Tool breakage detection Renishaw TS 27 R ( installed in 2021 ) NC Branch HAAS BJ. 2021 Coolant Setup 4 pcs machine shoes Operating Instructions
Key data: 1400 mm, 700 mm, 700 mm
Manufacturer: Victor Model No.: Vcenter-140 Year: 2001 Condition: Used Stock number: 9605 Control system: HEIDENHAIN TNC 430 Work table length: 1650 mm Work table width: 650 mm X-axis travel: 1400 mm Y-axis travel: 700 mm Travel Z axis: 700 mm
Key data: 1040 mm, 600 mm, 500 mm
CNC Vertical Machining Center DECKEL MAHO DMC 104 V linear With track control Heidenhain iTNC 530 Year of Make: 2005 Travel: X 1040 Y 600 Z 500 Speed range: 0 – 12,000 rpm infinitely variable With the following accessories: Rigid angle table 850 mm x 600 mm clamping surface Vertical tool changer with 30 magazine positions ( SK 40 ) NC Dividing head with tailstock Electronic handwheel Full protection cabin with sliding doors and interior lighting Operating mode 3 + 4 IKZ 40 bar Chip conveyor Rotoclear Swarf Spray Gun Spiral chip auger Coolant Setup 3 Height Adjustable Machine Shoes Operating instructions
pneumatic connection; maximum measuring height approx. 600 mm; Auction-ID: A1-50476-189
Used Rafailidis vertical router (spindle router / milling machine) for woodworking. • Brand: Rafailidis. • Vertical router used for routing, profiling, grooving and shaping of wooden parts in joinery and furniture production. • Condition: has not been in operation for several years; inspection and testing are required before use. • Model and technical details such as table size, spindle data, motor power and supply voltage are not recorded; please contact us. Auction-ID: A7-50988-136
maximum number of results exceeded
please refine your search
