127,273 used machines on RESALE, but how to find them? Machine Search
DYNAJET 500me/30 basic - 400V/50Hz pressure washer INTRODUCTORY OFFER: If you want to be sure that this device is right for you, then we have a special offer for you: Crediting of rents for up to 6 months at 100% of the purchase price! Welcome to the compact me-Class with a particularly high flow rate! In contrast to its smaller colleague DYNAJET 500me, the more powerful DYNAJET 500me 30 basic with up to 500 bar working pressure achieves a flow rate of 30 l/min (1800 l/h) for particularly demanding tasks. Of course, the DYNAJET 500me 30 basic convinces not only with its high performance, but above all with its compact dimensions and high mobility. Construction - Robust, powder-coated steel frame for optimum machine protection and long service life - High durability due to screw connections made of stainless material - Crane eyelet for easy transport and handling - Splash w ...
DYNAJET 500me/30 basic - 400V/50Hz Cold Water Pressure Washer INTRODUCTORY OFFER: If you want to be sure that this device is right for you, then we have a special offer for you: Crediting of rents for up to 6 months at 100% of the purchase price! The DYNAJET 800me is the world's first device with 800 bar working pressure and dry-closing gun without control cable. In addition to its high performance, the Professional high-pressure cleaners above all due to their compact dimensions and high mobility. Construction - Robust, powder-coated steel frame for optimum machine protection and long service life - High durability due to screw connections made of stainless material - Crane eyelet for easy transport and handling - Splash water resistant (IP54) control cabinet for versatile and smooth use - Operating hours counter for optimal post-calculation Drive - Automatic star/ ...
DYNAJET 1000me - 400V/50Hz/63A Cold Water Pressure Washer INTRODUCTORY OFFER: If you want to be sure that this device is right for you, then we have a special offer for you: Crediting of rents for up to 6 months at 100% of the purchase price! The DYNAJET 800me is the world's first device with 800 bar working pressure and dry-closing gun without control cable. In addition to its high performance, the Professional high-pressure cleaners above all due to their compact dimensions and high mobility. Construction - Robust, powder-coated steel frame for optimum machine protection and long service life - High durability due to screw connections made of stainless material - Crane eyelet for easy transport and handling - Splash water resistant (IP54) control cabinet for versatile and smooth use - Operating hours counter for optimal post-calculation Drive - Automatic star/tria ...
Punching machine Trumpf TruMatic TC3000-1300 FMC Year of construction 2004 87500 hours (03.2021) In this case, the configuration : TruMatic TC3000-1300 FMC Year of construction 2004 Working range : 2550 x 1280 mm Standard: • Sturdy C-frame • Coordinate guidance with integrated linear magazine, 21 seats for tools and clamps • 2 clamps • Drives: Maintenance-free digital three-phase servo motors • Punching head: hydraulic system with closed control loop, hydraulic mono tool holder, 360° rotation for all Tools, automatic tool length compensation, programmable scraper movement • Programmable hold-down • Tool spray lubrication • Punch butt suction • Partial slide 500 x 500 mm • Control Bosch PNC-P, activity-oriented user interface, Online Help, Diagnostics, 3.5" Floppy Drive, RJ45 Network Connection • Graphics programming ToPs 2000 • ToP ...
M. No.: 821301-10002 Equipment / further information: Hardware • OptiPrint™ Media Cleaner • Driven roller feed system with media flanges • Driven reel system with media flanges • Baskets • Rear and front media sensor • Hard disk (2 GB job space) Interface • Control panel with 8 buttons. • 4x20 character liquid crystal display. • English display language. • Metric or English units. Functionality • 16 user configurations. • Automatic alignment system. • Up to eight colors/job • OptiTrac Save Ribbon • Right side of the tape • OptiTrac colors: mirror silver and gold Cut: • Concatenation and curve smoothing to achieve better cutting quality. • OptiCut drag motion optimization. • Overlap for easy weeding. • Multiple reprint function (up to 999). • Flash Eproms With 5 cassettes and various ribbons Operating instructions
Machine Details Warehouse number 1105-03592 Machine type lathe - cycle controlled FAT brand Type TUR 630 MN Year of construction 2011 Control type CNC Control Siemens 810D MANUAL TURN Storage location FRANCE Country of origin Poland Delivery time immediately Freight base Freely loaded from location Technical details Turning diameter 370 mm Turning length 3000 mm Top height above bed 630 mm Circulation diameter max. via face slider 370 mm Spindle bore 105 mm Spindle speeds: 2 stages 2 - 2500 rpm Tool holder REVOLVER VDI 40 Control Siemens 810D MANUAL TURN Total power requirement 18.5 kW Machine weight approx. 6 t Information Equipment: REVOLVER 8 COMPARTMENT VDI 40 Chip protection wall automatic coolant device RS 232 interface 3-jaw chuck diameter 315 mm HOLLOW SPINDLE THROUGH. 105 MM automatic lubrication system Brochure LUNETTEN 1 STUCCO
-High performance -Belt grinding device height-adjustable 0-90° -Maximum usable face grinding surface -Belt adjustment with fine adjustment -Combined belt grinding/grinding machine -Longitudinal stop for material guidance -Perfectly balanced and low vibration -Double-sided connection for dust extraction Ø 50 mm -Motor circuit breaker with undervoltage trigger -Fixed stop -1 sanding belt standard (brown), grain 80 -1 grinding wheel 250 x 40 x 51 mm, grain 80 -Spark protection -Connection cable with CEE plug -with machine stand, EMERGENCY STOP push button, brake and suction Delivery: in Germany free domicile incl. packaging
Special price for stock goods! Only while stocks last! Belt dimensions: 75 x 2000 mm Belt speed: 29 m/sec. Contact disc Ø x W: 200 / 80 mm Face grinding table: 460 x 75 mm Suction connection Ø: 100 mm Motor output power S1 100%: 3.0 kW Motor input power S6 40%: 4.0 kW Voltage: 400 V Length: 1080 mm Width: 440 mm Height: 1000 mm Weight approx.: 66 kg Characteristics: - Good grinding performance due to high belt speed - Quick adjustment for horizontal and inclined position - Continuous face grinding surface for optimal grinding of long workpieces - Constant belt tension due to spring-loaded clamping device - Universally applicable for grinding edges, surfaces and cylindrical grinding - Including quick clamping system for fast belt changes - Easy adjustment of the parallel belt run by means of adjustment screw - Graphite coating on the face grinding surface increa ...
Special price for stock goods! Only while stocks last! Drilling-milling machine: Bernardo Type/Model: FM 45 HSV with digital display Condition: new Drilling capacity in steel: 32 mm Drilling capacity in cast iron: 40 mm Knife head milling cutter max.: 80 mm Projection: 220 mm Spindle speed: (12) 75 – 3200 rpm Spindle holder: MK 4 Pinole stroke: 120 mm Pinole feed: (3) 0.10 / 0.18 / 0.26 mm/U Table size: 800 x 240 mm Travel (x / y): 555 / 205 mm Milling head swivel: -60° to +60° Distance spindle / table: 60 – 485 mm Height adjustment milling head: 425 mm T-slot size: 14 mm Motor output power S1 100%: 1.1 / 1.5 kW (400 V) Motor input power S6 40%: 1.5 / 2.2 kW (400 V) Machine dimensions (W x D x H): 1140 x 770 x 1500 Weight approx.: 308 kg without base Characteristics: - High-torque 2-stage motor, speed range 75 - 3200 rpm - Double-sided swivelling m ...
Small 4-side brushing/grinding machine for small parts. Minimum part length 250 m ! SPECIFICATIONS: Feed belt speed: 3-20 m/min. Spindle diameter: ø 40 mm Length of horizontal spindle shaft: 150 mm Length of vertical spindle shaft: 100 mm Maximum brush diameter: ø 200 mm Spindle speed as standard: 1000 ot/min (possibility of infinitely variable control) Power of the main motors as standard: 4x1.1 kW Power of the motor for the feed of the conveyor belt: 0.55 kW Diameter of the suction nozzle: 2 x ø 120 mm Maximum material height: 100 mm Maximum material width: 150 mm Minimum length: 250 mm (must be advised) Weight of the machine: 450 kg Compact machine with quick adjustment and optional parameters. KuSING has been manufacturing woodworking machines since 1991. In the field of 4-sided brushes, we offer a wide range of machines for every application. Parameter chang ...
ZOLLER SMILE / PILOT 3.0 presetting and measuring machine was manufactured in 2019 in Germany. The machine is a professional tool measuring and presetting device, whose easy operation and precision guarantee flawless results. A telecentric lens and a CCD camera with integrated LED ring for measurements in reflected light (blade inspection) are used to perform the measurements. ZOLLER SMILE 420 is equipped with the CNC controller ZOLLER »pilot 3.0« and functions such as automatic blade recognition, measurement of radial run-out and axial run-out, maximum contour function and cutting edge control. The tool to be measured can have a maximum length of 420 mm and a maximum diameter of 420 mm. Specifications of the ZOLLER SMILE / PILOT 3.0 presetting and measuring machine - maximum tool length Z: 420 mm - maximum tool diameter D: 420 mm - diameter measurement according to Abbe’s p ...
Machine Details Stock-No. 1105-03620 Type of machine CNC Lathe Make SPINNER Type TC 32 Year of manufacture 1999 Type of control CNC Storage location HAGUENAU Country of origin Germany Delivery time Immediate Freight basis ex Site Technical details turning diameter 150 mm turning length 300 mm control SIEMENS 810 D swing diameter 300 mm swing diameter over face slide 150 mm x-axis 400 mm z-axis 285 mm spindle passage 32 mm spindle motor 7.5 kW spindle turning speed - stepless 8000 rpm c-axis 0.001° Turret positions 12-speed VDI 25 work piece power 1.2 kW toolpiece turning speed range 6000 rpm weight of the machine approx. 1.8 t dimensions of the machine ca. 2 X 1 X 1.6 m Additional information CNC CONTROL SIEMENS 810 D
Type: Treif Divider Type 2550 Slices are precisely stacked on top of each other even when the stacks are 100mm high The slicer can also be equipped with the automatic shaving function upon request The machine can also accommodate the off-set delivery of products such as cheese Compact and space-saving design ensures optimum utilization of space-saving High degree of flexibility: Product can be changed without mechanically changing the system Special solution: expanded chamber up to 220 mm to accommodate Italian Mortadella for example Dimension of the machine Length: 210 cm Width: 80 cm Height: 210 cm Electrical power: 4.8kW Delivery time: 30 working days after payment
STANKOIMPORT 5822M thread grinding machine was manufactured in the USSR. The machine is used for the process of grinding threads to give them the correct dimensions and roughness. During this process, a grinding wheel with a diameter of 400 mm is used to remove a small allowance from the workpiece, forming the thread shape on it. The grinding machine processes threads with a maximum diameter of 200 mm, a length of 500 mm and a weight of up to 30 kg. Depending on the choiceed disc, the diameter of the workpiece can be from 3 to 150 mm (grinding with a single-coil disc) or from 10 to 120 mm (grinding with a multi-coil disc). The total weight of the grinding machine is approximately 5 tons. Technical data of the STANKOIMPORT 5822M thread grinding machine - maximum workpiece diameter: 200 mm - diameter of the workpiece grinded with single-coil disc: 3-150 mm - diameter of the workpi ...
Holzstar KSO 750 Edge Grinder With oscillating sanding belt for good removal performance, a clean grinding pattern and a longer service life of the sanding belt With height-adjustable grinding table Standard with -45° to +45° infinitely adjustable miter and workpiece stop Infinitely inclined grinding unit (0°-90°) for vertical and horizontal grinding Table height adjustment by means of handwheel Robust work table made of cast iron with T-grooves, stable stand of the machine when working With height-adjustable additional table for contour grinding Fast and easy sanding belt change via quick clamping system Spring-loaded clamping device for uniform belt tension Abrasive sole with graphite coating as standard Suction nozzle Ø 100 mm With lockable storage option in the standard substructure Equipment details: Thanks to the infinitely variable grinding unit, the edge gri ...
Pester PEWO-pack 250 stretchwrapper for folding cartons, etc., 90 degree infeed conveyor with a total length of approx. 2000 mm, format range cartons min. 30 x 15 x 60 mm (a x b x h), max. 150 x 90 x 180 mm (a x b x h), format range collation/bundle min. 60 x 30 x 60 mm (LxWxH), max. 400 x 180 x 250 mm (LxWxH), suitable for PE-foil with a foil width from 50 to 250 mm and a foil thickness from 0.025 to 0.1 mm, reel diameter of the foil max. 300 mm, electrics 3 x 400 V+N+PE 50 Hz, power consumption 2.7 kW / 4 A, fuse protection 16 A, air consumption 6 norm litres per stroke, operating pressure 5 bar, pneumatic connection 1/2 ", pneumatic pressure min. 5 bar up to max. 10 bar, capacity up to 30 collations/bundles per minute
Can make meatballs and burgers up to 130mm in diameter. and height up to 30 mm; – The height can be adjusted; – Equipped with a speed controller; – Limit switch for more tape security; – Motor: 0.3 kW – Single-phase motor – Hopper capacity 24 l. Standard shapes: Round burgers with diameter: 22 mm. 32 mm. 40 mm. 65 mm. 100 mm. 115 mm. 130 mm. Round meatballs with diameter: 22 mm. 32 mm. 40 mm. 65 mm. Depending on the chosen thickness, a different weight of the final product can be achieved with one mold. Accessories: As standard, the machine comes with one mold. As an option, you can also order: Round burgers with a diameter of: 22 mm. 32 mm. 40 mm. 65 mm. 100 mm. 115 mm. 130 mm. Round meatballs with diameter: 22 mm. 32 mm. 40 mm. 65 mm.
Wölco Lupo VPAB-53 labelling system Fully automatic labeling machine for professional labeling Broadband Multi-Labeler Manufacturer: Wölco Masch. Type: Lupo VPAB-53 YOC 2011 Connection: 400V Current 3 x 16 A Power: 2.5 kW Air: 6 bar Broadband Multi-Labeler Wölco Lupo VPAB-36 Manufacturer: Wölco Masch. Type: Lupo VPAB-36 YOC 2011 Connection: 400V The Lupo VPAB-36 is the ideal device for permanent industrial operation when precise and variable label printing with position-accurate application is required. Sato Printer S84 ex Label Printing System The SATO S84-ex/S86-ex printer is a very powerful, automated label printing system with a user-friendly design and a wide range of functions. This printer with its solid Design is designed for continuous operation. The main features of the printer are: • Two-color LCD backlight and two-color status LED ...
Bluhm Weber Legi-Air 4050S Labeling Machine 4.14.1 Basic structure The system is designed as a closed aluminium profile frame and has a very compact design. The control cabinets are integrated in the lower part of the frame. The main valve terminal is located behind a service door below the control panel. The facility includes four workplace stops. Operation is via a touch screen. The control panel is mounted on the right side of the frame. In the station, a labeling system from Bluhm Weber is used, here the documentation of the company Bluhm applies accordingly. 4.14.2 Functional sequence - The retracting workpiece carriers with IO modules are stopped, excavated (positioned) and contacted in the substations 10.1 or 10.2. In these two stations erf - In substation 10.3, the IO modules are automatically labelled. The generation of the labels and their content ...
The Junior 4.4 air cushion machine is a new, reliable, easy-to-use machine. This machine is designed to make air cushions made of "Bio Green" film in various dimensions to produce. The "Bio Green" films made of HDPE with DPA additives will be available in 12 – 24 months under Exposure to UV rays, moisture and bacteria degradable (ASTM D6954-04 certificate) and therefore very environmentally friendly. 1 table model Air-O-Pack Junior 4.4 Power: 8 – 15 m/min Setting options: adjustable chain length, temperature, speed, air volume Digital display and control unit Digital storage for air volume and temperature Fast film change Low noise max 60 dB Electrics 220/110 V, motor 120 W Warranty 6 months, excluding wearing parts Options at an extra cost Mobile chassis MS-01 € 270,-- mobile storage basket MB-02 € 270,-- Foot pedal € 60,-- Sensor control € 60,-- ...
HACO OMATIC 130 DTRH punching machine was built in 2014 in Belgium. The machine is used to punch various size shapes and holes in workpieces weighing up to 150 kg and having a maximum thickness of 6.5, a width of 1500 mm and a length of 4000 mm. The machine operator manually operates the punching machine by loading the workpiece on the working table and changing the punching tools using a special device offered in the price of the machine. The punching process takes place on the brush table of the punching machine, which significantly reduces noise levels and adequately protects the sheet metal surfaces against various types of scratches and nicks. Depending on the choiceed mode, the machine performs between 1,000 and 1,500 punches per minute with a press force of 30 tonnes. The equipment includes amongst others a TPC 69C Graphics CNC controller for graphical programming of the desire ...
Mikron C Axis Machine Table - with Heidenhain control 430 - Siemens server motor - Table: 60 x 110 cm - 4th axis, diameter: 50 cm - Weight: 650 kg Good condition fully functional can be visited and tried out on site. Shipping also abroad. Sightseeing: Basically, I would like to point out that the article, in order to avoid misunderstandings, can be viewed before the purchase and tested under electricity. Please ask questions before buying to avoid ambiguity. For general questions or an appointment for a viewing, I can be reached at any time at the telephone number below or above. Errors in the description and prior sale excepted. VAT will be shown separately on my invoices. Shipping with freight forwarder.
2130 2x3 M 3D CNC milling plotter built in 2014 in China, is used for machining workpieces in the X,Y and Z axes. Machining is performed on the machine’s vacuum table with dimensions (L x W) of 3000 x 2100 mm, by using a rotary head. The applied electro-spindle with a power of 4.5 kW, is distinguished by its extreme reliability and speed reaching up to 18000 rpm, allowing the desired result to be obtained in a very short time. The CNC milling machine is controlled by a hand-held terminal connected to the WEIHONG NK105 G2 CNC controller. This solution makes the machine’s operation much easier to handle and allows every function to be used. The machining centre is also equipped with among others: an EMI filter to attenuate high-frequency electromagnetic interference and a PANASONIC MDME102GCGM axis servo motor. Technical specifications of the 2130 2×3 M CNC milling machine - wo ...
Machine Details Warehouse number 1105-03703 Machine type CNC lathe - inclined bed machine Make SOMAB Type TRANSMAB 400 Year of construction 2002 Conventional control type Control NUM 1060 T Storage location FRANCE Country of origin France Delivery time immediately Freight base EX WAREHOUSE Technical details Turning diameter 500 mm Turning length 650 mm Control NUM 1060 T Turning diameter above the face sled 240 mm Turning diameter via transverse guide 320 mm Main drive motor 18/24 kW Spindle speeds 3600 rpm Spindle passage 73 mm Chuck diameter 210 mm Tailstock cone MK 4 Total power requirement 30 kW Machine weight approx. 4 t Space requirement approx. 3.60 X 2 X 2 m Information Machine in inclined bed design with NUM 1060 CONTROL HYDRAULICK CHUK PARTS FAENGER SPAENEFOEDERER 12x revolver VDI 30
Blades for industry (sewing machine spare parts) Cutting blades Stitch cutter Circular blades, upper knife Sewing machine parts According to drawing or sample. Price on request.
Inv. Num. : 6238 Type: HIT-250 MS Producer: HYUNDAI Created: 2004 Parameters: Control system: Siemens Sinumerik 840D turning length: 650 mm turning diameter: 390 mm Maximum turning diameter over bed: 590 mm Maximum spindle speed: 3600 1/min Maximum main spindle power: 15 kW Spindle passage: 80 mm Number of all tools: 12 pieces Number of driven tools in the turret head: 12 pieces Chuck diameter: 250 mm Axis X: 265 mm Axis Z: 660 mm Clamping diameter (counter spindle): 160 mm Spindle passage (counter spindle): 50 mm speed (counter spindle): 4500 1/min Length: 3692 mm Width: 1850 mm Height: 1850 mm Weight: 6450 kg Equipment: C-axis Technical documentation Conveyor Driven tools 2x 3-jaw chuck Cooling Complete coverage of the work area Oil mist separators Housing for clamping rotary knives and cases (8 pcs.)
Machine Details Stock number 1105-03735 Machine type CNC lathe Brand MAZAK Type QT 20 N Year of construction 1995 Control type CNC Control Mazatrol T PLUS Storage location FRANCE Country of origin Japan Delivery time immediately Freight base from site Technical details Turning diameter 440 mm Turning length 451 mm Control Mazatrol T PLUS Turning diameter via bed carriage 300 Tailstock holder MK 4 Quill stroke 130 mm Tailstock displacement 500 mm x-axis 180 mm z-axis 510 mm Spindle bore 62 mm Speed range 12-4500 rpm Total power requirement 40 KVA Machine weight ca. 4,2 t Information WITH MAZATROL T PLUS Good Macschine All prices plus VAT. VAT.. Changes and errors in the technical details and information reserved.
Manufacturer: Heinrich KöllschenMaschinefabrik Rheydt Model: on the 2000 x 20 machine no.: 761907 Year of construction: 1976 weight: 24500KG General information / technical data: heavy mechanical bending machines from sturdy welding construction in very good condition Working width: 2000 mm Steel ST 50 maximum material thickness: 20 mm Opening the top clamping (clamping cheek): 475 mm Adjustment of the beam: 200 mm motorized height adjustment Bending angle: 130° via electrical rotation angle input can be set Upper cheek speed: 6 mm / sec Bending beam speed: 1.25 RPM (approx. 90 sec for 90 ° bend) Backgauge: from 50 to 999 mm electrically adjustable, with digital display of length dimensions machine: (h x w x d) 3600 x 4350 x 4400 mm (without pit / with bending beam landing) Dimensions cabinet:(h x b x t) 1800 x 1200 x 400 mm Bending actuator power: 30KW Power top clam ...
Model: R950-08 Power: M2-M8 Speed (rpm): 700 Air requirement: 750l/min Pressure: 6-7bar Working range: Rmax 950mm Construction parallel arm: Stable arm structure (hard aluminium profile 38x29) Weight: 18kg Adapter Holder: TCS 1B Model: R950-12 Power: M3-M12 Speed (rpm): 400 Air requirement: 750l/min Pressure: 6-7bar Working range: Rmax 950mm Construction parallel arm: Stable arm structure (hard aluminium profile 38x29) Weight: 18kg Adapter Holder: TCS 1B Model: R950-16 Power: M3-M16 Speed (rpm): 300 Air requirement: 950l/min Pressure: 6-7bar Working range: Rmax 950mm Construction parallel arm: Stable arm structure (hard aluminium profile 38x29) Weight: 25kg Adapter Holder: TCS 2B Model: R950-020 Power: M3-M20 Speed (rpm): 150 / 400 Air requirement: 950l/min Pressure: 6-7bar Working range: Rmax 950mm Construction parallel arm: Stable arm structure ...
Tractive effort: to 25 Length: 2000 mm Room set: 3 piece
Model: R1450-08 Power: M2-M8 Speed (rpm): 700 Air requirement: 750l/min Pressure: 6-7bar Working range: Rmax 1450mm Construction parallel arm: Stable arm structure (hard aluminium profile 38x29) Weight: 23kg Adapter Holder: TCS 1B Model: R1450-12 Power: M3-M12 Speed (rpm): 400 Air requirement: 750l/min Pressure: 6-7bar Working range: Rmax 1450mm Construction parallel arm: Stable arm structure (hard aluminium profile 38x29) Weight: 23kg Adapter Holder: TCS 1B Model: R1450-16 Power: M3-M16 Speed (rpm): 300 Air requirement: 950l/min Pressure: 6-7bar Working range: Rmax 1450mm Construction parallel arm: Stable arm structure (hard aluminium profile 38x29) Weight: 27kg Adapter Holder: TCS 2B Model: R1450-020 Power: M3-M20 Speed (rpm): 150 / 400 Air requirement: 950l/min Pressure: 6-7bar Working range: Rmax 1450mm Construction parallel arm: Stable arm s ...
Manufacturer: Noise Model: RS4/1000 machines no.: 5123/706 Year of construction: 4/1989 weight: approx.: 540 KG General information / technical data: used mechanical vertical Innenräummaschineim of very good immediate quiet machine running Zugkraftbei 3m / min: 4000 KG Räummgeschwindigkeit: 3m / min and 5m / min Return speed: 10 m / min maximum stroke: 1000mm maximum tool length: 1200 mm Table area: 450 mm x 250 mm Table breakthrough 90 mm Workpiece diameter: any Dimensions: h x w x d 1610 x 630 x 855 mm Engine power: 2.2 / 4,7KW Stromversorgung380 Volt 50 HZ Optional accessories: -Kühlmittel / thread cutting fluid pump electric power meter -electrical scanning of the clamping JAWS (tool collection control to prevent against accidentally driving back the drawbridge) Comment: The double spindle drive ensures a quiet and central point of the train, as well as a ...
Model: R1950-08 Power: M2-M8 Speed (rpm): 700 Air requirement: 750l/min Pressure: 6-7bar Working range: Rmin 300mm – Rmax 1950mm Construction parallel arm: Stable arm structure (hard aluminium profile 38x29) Weight: 23kg Adapter Holder: TCS 1B Model: R1950-12 Power: M3-M12 Speed (rpm): 400 Air requirement: 750l/min Pressure: 6-7bar Working range: Rmin 300mm – Rmax 1950mm Construction parallel arm: Stable arm structure (hard aluminium profile 38x29) Weight: 23kg Adapter Holder: TCS 1B Model: R1950-16 Power: M3-M16 Speed (rpm): 300 Air requirement: 950l/min Pressure: 6-7bar Working range: Rmin 300mm – Rmax 1950mm Construction parallel arm: Stable arm structure (hard aluminium profile 38x29) Weight: 27kg Adapter Holder: TCS 2B Model: R1950-020 Power: M3-M20 Speed (rpm): 150 / 400 Air requirement: 950l/min Pressure: 6-7bar Working range: Rmin 30 ...
:::SPECIFICATIONS::: CNC Model: Okuma OSP CNC version: U100 - L Spindle nose: ASA 6 Spindle power: 22Kw Main spindle revolutions: 5000 Turning diameter: 630mm Bar clearance: 51mm Turning length: 1170mm Number of tools: 44 Tool connection: HSK 63 Spindle power: 7,7Kw Number of spindle revolutions: 6000 X Axis Stroke: 475mm Y axis stroke: + - 80mm Z Axis Stroke: 1155mm Swivel B-axis travel: 0.001degree Rapid feeds linear axes X Y Z: 40m/min High cooling pressure: yes Pressure value: 120bar System with external tank with filter: yes Number of Tool Turrets: 1 Number of tool places before turret: 12 First turret tool attachment type: VDI Counter-spindle: yes Number of counter-spindle revolutions: 6000 Counterspindle power: 22Kw Bar clearance: 32mm Z stroke counterspindle : 1180mm Model and brand bar magazin ...
General / technical data: Manufacturer: Rausch Type: RS6/1000 Year of construction: 07/2000 Machine no.: 60305 Weight: approx. 750kg Tractive force: 60kN (80kN) Clearing speed: 4m/min Return speed: 8m/min stroke: 1000mm Maximum tool length: 1200mm Maximum workpiece diameter: Ø approx. 900mm Table opening: Ø 90mm for standard clearing mandrels Dimensions (h x w x d): 1600mm x 850mm x 1000mm (h=table height to the floor without superstructures) Current type: 400 Volt / 50Hz – 6 / 7,5kW Accessories/ Special equipment: – electrical scanning of the clamping jaws (tool removal control to prevent unintentional retraction of the drawbridge) – integrated coolant system with check valve and drain valve – patented coolant/lubricant swivel system (retrofitted) Remark: The machine has the manufacturer CE marking. The machine is energized in our wareho ...
Rubber Air Spring, Vibratory mounts, Machine Feet, Machine Legs, Antivibratory feet, Leveling Feet, Heavy Duty Feet Load (Kg/pc): 1200 - 3400 Max. Pressure Bar: 6 Dimensions: S: 370mm D: 360mm H App: 111mm d: 200mm h: 8mm Bolt: M20 Four pieces on stock. Similar models that we can produce: TL1: Load (Kg/pc): 25 - 60 Max. Pressure Bar: 3 TL2: 80 - 300 Load (Kg/pc): Max. Pressure Bar: TL3: Load (Kg/pc): 270 - 800 Max. Pressure Bar: 5 TL4: Load (Kg/pc): 650 - 1500 Max. Pressure Bar: 6 TL6: Load (Kg/pc): 3000 - 6500 Max. Pressure Bar: 6 It can fit to Bruderer, Mabu, Schaal, Schuler, Haulich and other machines. For any questions please contact us.
Dear customers currently we offer you a new oscillating roller grinding machine for model and mold making of the Swiss brand BMT. Here are the technical data: Length of sanding rollers: 130 mm Sanding rollersØ: 20 – 30 – 40 – 50 mm Oscillation (stroke): 12 mm and 56 strokes per minute Speed grinding spindle: 2800 rpm Machine table dimensions: 400 x 400 mm Table inclination can be swivelled forward by max. 35° Engine power: 0.25 kW at voltage 400 V (3-phase) 50 Hz Suction nozzle Ø 50 mm Weight 46 kg The scope also includes a set with grinding sleeves Inner diameter grinding sleeves: Ø 12 – 20 – 30 – 40 – 50 mm Outer diameter grinding sleeves: Ø 15 – 23 – 33 – 43 – 53 mm Price plus VAT, which will be shown separately on the invoice. Free and insured shipping throughout Germany! If you have any questions, please do not hesitate to contact u ...
FILM WIDTH 10 cm - 20 cm RECOMMENDED FILM THICKNESS 17μ, 23μ, 25μ PE/PVC film WORKING SPEED 10 m/min. Dimensions of the goods to be packaged: max width 95 cm height 45 cm Power supply 2.2 kW 3-phase 380/400 volts Compressed air connection 6 bar PACKAGING MACHINE FOR FURNISHINGS SUCH AS BATHROOM AND KITCHEN FURNITURE OR DOORS DOOR FRAMES OR TRIM LAMINATE FLOORS ALUMINIUM PROFILES STEEL PROFILES WOODEN PROFILES AND TUBES OF STEEL ALUMINIUM OR PLASTIC Max length infinite Min dimensions (width x height x length) 100 x 18 x 600 MM Conveyor carpet Usable length 1924 MM Total length 2000 MM Working height 915 MM Electric motor from conveyor belt 0,55 kw conveying speed 12 m/min Details of stretch film width of stretch film 200 mm Max diameter of stretch film roll D 230 mm Inner diameter of the roller core 76 mm Recommended film thickness 23/30/35 micron General te ...
We are here to provide an L type automatic sealing machine, which is widely used in a variety of industries due to various reasons. Our machine is available in a variety of specifications. A loading and cooling zone is supplied as standard output. A heat-resistant, powder-coated carrier was used. It is very easy to install and easy to use. Conveyor roller made of stainless steel and silicone coated. Power-coated tunnel covers for heavy duty and an electrical control panel are included. Capacity: 50 pieces/min Voltage 380V/50-60Hz/3-phase Main Material: Stainless Steel The internal circuit type is suitable for PVC. PP. POF packaging material. Extra-long shrink tunnel, intelligent temperature controller with figure and closing heat wind inner circuits.
Herbert Cyclone nik 2 top labeller from 2012. The applicator head can turn 360 degrees around. Label height: 140mm Year of production: 2012 Serial number: HS 108869 Condition: good Dimensions: 950mm x 850mm & 2.100mm (LxW&H)
Type: LABELING MACHINE Applicable industries: production facilities, food and beverage factories, retail, others Packaging type: box, bag, bag on any flat surface Packaging material: plastic, paper, metal, glass, wood Automatic Quality: Automatic DrivenType: Electric Voltage: 220 V/50 Hz weight: 84 KG Key selling points: Easy to use Core components: PLC, pressure vessel, gearbox, motor, motor, bearing, gearbox, pump Marking accuracy: ±1 mm Labeling Speed: Standard Model: 30~60pcs/min Outer diameter of the label roll: 300 mm Inner diameter of the label roll: 76 mm Machine Material: Aluminum Alloy, Iron
An Eckenabrunder (corner punch) is designed to provide orthogonal edges with a RADIUS. With various stamping and punching tools, materials such as paper, cardboard, aluminum-composite, aluminum can be processed up to 2 mm (E.g. signs) and non-ferrous metals. Corners cut round NPR 45 incl. 1 piece knife R 4 or R 8.
maximum number of results exceeded
please refine your search
