subcategories
(3rd category level)
Manufacturer:
(Category: 406)
Pester PEWO-Pack 450 SN, overhauled in 2013 For tightening banding single and collective containers with PE film in the pharmaceutical, cosmetics and food industry The technically high-quality standard equipment includes: - Control panel with touch panel, Temperature monitoring, general fault indication - Product protection through safety monitoring by means of Sensors in the closing area - Foil monitoring, - Machine can be moved, i.e. it has swivel and fixed castors for internal transport, in the resting position, the stability is ensured by height-adjustable feet - Two-hand release for manual operation -Documentation Specifications - - Working dimensions (max. mm): - Rack length 300, - Rack width 540, - Slide-in height 250, - Seal width 450, - Output: 24 cycles/min. - Hardware and software PLC Mitsubishi / remote maintenance p ...
Pester Pewo pack 250 compact The basic machine PEWO-pack 250 compact comprises the following assemblies (standard equipment): - Degree of protection : IP54 (ST) - Control cabinet : Swivel - Proximity Switch : Wenglor (ST) - Pneumatic version : Pneumatics (ST) - Traffic light indicator : Tricolor (ST) - Electrical version : Electrical standard S rev 15 - Frequency converter : Lenze (ST) - Product feed : straight in the middle Specifications: - Control unit HMI - Type : HMI 15" Pester Tangius (ST) - Control : Elau PacDrive - Voltage : 3x400V+N+PE, 50 Hz/60 Hz - Operating side : right - Protective cover : Acrylic glass (ST) - Paintwork : VA - Design (ST) - Packaging material - film : PE flat film - Documentation - Language : 2x French+1x CD - Documentation - Execution : Standard - Documentation - Supplier : 1x (ST) - Validation : Standard - Machine marking : F ...
Used machine for the application and sealing of shrink sleeve labels. Manufacturer PDC Europe SAS. New 2007. The machine consists of: 1. shrink sleeve label applicator PDC100BEM , 2.5 kW. The sleeve applicator is an automatic unit designed to apply neutral or printed PVC and/or PET sleeves. The process of making and setting the sleevs takes place in five working zones: The spool is supported and unwound up to the opening tetrahedron, The roll of sleev is opened and then directed to the cutting zone where it is cut to length. The sleeve is moved from the cutting zone to the ejector by means of a feeder. The product to be labelled is fed underneath the ejector, positioned underneath it precisely and moved on. The Sleeve is placed on the product using the ejector. Estimated weight of applicator: approx. 300 kg. 2. heating tunnel TAR1500-III for heat-shrinkable labels. Output 19 ...
Pester Pewo Pack 450 with shrink tunnel further information on request
Shrink tunnel from a German manufacturer: -Tunnel opening approx. 500 x 200 mm. -Temperature adjustable up to 250 degrees and transport speed up to 25 m/min. -Choice of fixed or center-rotating tunnel bars. -The hot air flows can be adjusted separately at the top and centre via deflectors. -Ground air at the bottom can be switched on separately. -The machine can be pushed or fixed by means of lockable castors.
Shrink packaging FL5545TB L sealer and shrink tunnel Serial: 872 2012, L sealer on conveyor, sealing bars 550mm x 450mm, into shrink tunnel, aperture 400mm x 220mm, variable speed conveyor and adjustable temperature controls, mobile, 3Ph
Pester PEWO-pack 800 shrink packer für bottles/aerosol cans, right-angled infeed belt with grouping station, sealing width max. 800 mm, product infeed width max. 850 mm, product infeed length max. 350 mm, product infeed height max. 250 mm, capacity up to 25 collations per minute, electrics 400V/50-60Hz, power consumption 16.8 kW, operating pressure 5 bar, machine net weight approx. 700 kg, previously used for packing aerosol cans
Fabr: Kuper Machine type: ST/I-1200 Machine number: 7560 Year: 1991 Power: approx. 51kW Working width: 1200mm PROVIDER
Turbovac TV5575 Dip tank Serial: 20151529 2015, stainless dip tank, shrink tank, platform dimensions 730mm x 535mm, dipping length 300mm, max product height 250mm, max water capacity 130l, max product weight 30Kgs, adjustable temp control, exhaust hood, with outfeed conveyor, mobile, 3Ph
Packaging machine made by ULMA, model Alaska. New 2000. Technical data: -Speed 65 pcs/min. -Electrical power 5 kW, 220/400V, 50/60 Hz. -Pressure 7 bar. -Weight 1200 kg
Very well maintained shrink tunnel , 400 V, 13 KW
Shrink tunnel BVM SC 4030 SD; good condition; cleaned and tested; new chains and sprockets in 2022; Passage width 400mm; Passage height 300mm; Speed max. 14m/min.; Double chamber. Shrink tunnel BVM SC 4030 SD; good condition; cleaned and checked; in 2022 new chain and chain wheels; working width 400mm; working hight 300mm; spedd up to 14m/min.; double unit.
Pallet shrink machine with shrink hoods that descends and completely covers the pallet during the shrinking process. Energy sources: natural gas or liquefied petroleum gas and electrically powered. Function: Driven curtain to close the shrink bell opening Pallet base plate with integrated breather and ramp for Loading by means of a hand pallet truck Catalytic heaters ( No free flame ) Maximum power 13 Kw/hour Max pallet dimensions (standard version) length 1,200; Width 1.200 Height 1,500 mm Number of cycles up to 25 pallets/hour Automatic shrinking process with adjustable shrinkage time Preheating time approx. 30 minutes Operating temperature approx. 200°C - 220°C depending on film thickness
composed of: Belt infeed belt: • Type: FAG 500-1500 • Width 500 mm • Barrel length 1,500 mm • Speed approx. 25m/min • Working height 850+-50 mm • Power approx. 0.5 kW Film welding machine: • Type: SWS 5020 • Machine size (LxWxH): 2103 x 15653 x 1410 mm • Max product size (lxW): unlimited x max 480 mm • Welding punch width: 500 mm • Passage height: 220 mm • Conveyor belt speed: 35m/min • Film width: max. 650/650 mm • Film diameter max 300 mm • Connection 16A connector, 3ph 380 V • Transverse welding servo motor • Longitudinal welding pneumatic • Working height 850 mm Shrink tunnel: • Type: STA-45 30 • Dimensions: 1.840L x 1080 W x 1250 H mm • Tunnel opening: 1200 L X 450 W X 300 H mm • Product size max: 1700 L x 400 W x 250 H mm • Conveyor belt speed 10-40/min • Weight 520 kg • Working height 850 mm • C ...
Thermo shrink tunnel BECK type HV 601HPLS - Used equipment built in 2008 The high-performance shrink tunnel is built in an energy-saving design. He is from the The heating system and the adjustment options are designed so variably that they can be covered with foil. coated products of various contours can be shrunk cleanly. Functioning: The thermal shrink tunnel works with separate blowers to create a separately adjustable top and bottom heat. The special insulation technology reduces heat loss by radiating heat, reduces the power consumption by up to 20% and thus increases the Efficiency of the machine considerably. The shrink temperature is controlled by a digital control and precisely maintained even at high throughputs. The heating units at the top and bottom are removable; the thermal shrink tunnel is in case of maintenance available again after a few minutes. The ...
Specifications: Passage width: 400 mm Passage height: 150 mm standard, the passage height can be changed by using additional strips Hood length: 1,700 mm Transport length: 2100 mm Transport rod spacing: every 4th rivet occupied Teflon net coating for products with a small footprint Current type: 230/400 Volt three-phase current N-PE Heating power: controlled by solid stat. relay Power: 19 kW Throughput speed: infinitely variable Color: Hammer blow aluminum No guarantee is assumed for the technical data given in the description.
Packaging machine Beck Fitpacker Junior FJ 1040 U - Used equipment built in 1995 - small repairs necessary The Fitpacker Junior has a high packing performance and can process products of different lengths in disorder. A programmable logic controller is located at the top of the control cabinet and is easy to handle via a logical user interface. The packer also has a feeding system, which is especially suitable for line operation. Machine changeover times are kept short by a digital operating concept and an adjustable shape shoulder. The control cabinet can be opened and swivelled so that optimal access is guaranteed in the event of maintenance and downtimes are reduced. The film roll holder is mounted at an ergonomically reasonable working height. Working speed: Actual production speed and effective net output depend on format, Type and composition of products and can ...
Kallfass Universa 400 with shrink tunnel and grab section Kallfass Universa 400 Year 2006 The system is immediately available. The Universa 400 is included in the price of the complete system. The machine is technically overhauled and is in very good condition. Technical data: - Length of cross welding punch: 450mm - Welding punch passage: max. 200mm - Min. product length: 80mm - automatic length compensation to reduce the punch gap - Welding punch monitoring - Control: Siemens S7-300 - Operating terminal with Siemens touch panel - Welding punch with replaceable welding strip - Side welding knife combination, can also be exchanged for a wheel knife system - Processable films PE and PO - Year of construction 2006 - Kallfass Compact 450 SO shrink tunnel - Gripper section with inline belt - Book magazine on gripper section - Ionization for blocking loose leaves - Cur ...
Kallfass Universa 400 with shrink tunnel and grab section Kallfass Universa 400 NT Year of construction 2003 The system is immediately available. The Universa 400 is included in the price of the complete system. The machine is technically overhauled and is in very good condition. Technical data: - Length of cross welding punch: 450mm - Welding punch passage: max. 200mm - Min. product length: 80mm - automatic length compensation to reduce the punch gap - Welding punch monitoring - Side sweat monitoring - Foil holding plate Pwq9ya - Control: Siemens S7-300 - Operating terminal with Sütron BT20 - Welding punch with replaceable welding strip - Side welding wheel-knife combination, can also be exchanged for a knife system - Processable films PE and PO - Year of construction 2003 - Shrink tunnel Kallfass Standard - Gripper section with inline belt - Curved band can be ...
small shrink line for sale consisting of vacuum chamber machine C 30 and shrink tank ST 40/60 - both mobile C 30 New machine - ST 40/60 overhauled 2022
1 BECK shrink tunnel type HV601, working width 60 cm, year 1999
1 BECK shrink tunnel type HV1000, working width 100 cm, year 1995
Steam shrinkage tunnel incl. steam generator (without transport conveyor)
REF-827 SLEEVE WRAPPER AND SHRINK WRAPPING MACHINE MEURER CM SB60-B The Meurer CM/SB-B sleeve wrapping machine produces sleeve-wrapped packages, with or without lateral shrink wrapping. The film is stretched lengthwise, for which reason it fits any product to perfection. Manufacturer: Meurer Model: CM/SB60-B Year: 2010 Product dimensions min/max: Length 40-400mm; width 50-600mm; height: 40-350mm Sealing jaw width: 600mm Film reel diameter: 400mm Overall dimensions: Length 1,520mm; width 1,430mm; height 2,090-2,140mm. Performance: up to 50 cycles/min depending on product and film specifications 400/230V + N + PE. Power: 3kW (without side shrinking), 11kW (with side shrinking unit) Air connection: 6 Bar, 1/2" Sealing system: permanently heated sealing tool with sealing blade and electronic temperature control. Easy access due to an open construction. Quick, tool-less ...
Inauen Maschinen AG Diptank Model: VC999 Stainless dip tank, chamber size 600mm L x 400mm W x 300mm H, digital temp control, mobile, 3Ph
Film wrapping machine with infeed conveyor, stacking device, outfeed conveyor with 90° curve and other outfeed conveyor 90° to the machine. PLC: SCHNEIDER. Output: 60 bundles/min.
Make Kallfass Model Universa 400 NT Year 2000 Working width 400 mm x unlimted Min. Product length 100 mm Product length Unlimted Passage height 200 mm Capacity up to 60 cycles per minute
